Regarding Getting Error in Idoc .... Outbound table not found

Hello everyone
I am working on ALE/Idoc, at the last i am getting error that idoc has created but cannot be send, I am using XML port (not file) so giving Physical Dictionary, please solve my problem where i have to change. please reply its urgent.
Thanks & Regards
Vimarsh B.

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

Similar Messages

Getting idoc error - Entry in outbound table not found- in outbound scenari

hi,
while generating idoc for outbound idoc to file scenario - i am getting error
"Entry in outbound table not found" (29 - error in ALE service)
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/C100/KU//WP_EAN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
but already entry has been maintained in partner profiles for the corresponding message.
same setup is working for other message types. pls let me know what might be the problem

Hi,
Check whether partner name is correct or not in WE20/outbound parameters undoer Logical System.
Regards,
Sreenivas.

IDOC Error - Entry in outbound table not found - Status 37

Hello,
we try to generate the IDOC in a Test Tool WE19. I always get the same error "Entry in outbound table not found" - Status 37. I tried already many config changes (Partner, Ports, Distribution Modell...).
The thing is that the IDOC should be sent on external system (non-SAP System) but also the IDOC should be write to file. The external system should later on catch the IDOC and process the data.
I suppose the problem is the fact that we send it to external non-SAP System. I add as Port Data and the source where the IDOC shoud be generated. The Partner that I choose is logical system. However I dont specify the RFC Connection because the file should only be saved and not send directly on the external system. Is it possible or maybe I need to specify the IP-Adress of the external system?
When it works I need to generate the IDOC as service management IW32. I try it with TA IORD. I get the message "rejected". Probably because of the error in the test tool WE19.
I am already fighting on it for many hours...
Thank you in advance
Michael

Hi
In we 19
Receiver
Port: A port created in R/3 referencing RFC dest pointing to XI.
Partner no: LS of XI (CLNT100)
Partner Type: LS
Sender
Partner no: LS of R/3 (RD1CLNT500)
Partner Type: LS
Message Type is DESADV
Basic DELVRY05
and i am sending blank idoc for testing.
Regards
Monika

Entry in outbound table not found, Error message no. EO400

I have created Partner profile and include message in partner profile. when i have generated IDOc (we60), that time, it is given error ( Entry in outbound table not found---- Error Msg no. EO400).
Please suggest me solution for the same.
Kunjan shah

Hi Kundan,
can u be more specifidc about ur requirement.So that i can help u out.What all the configs u have done and what is method ur using for generationg outbound idoc.
Regards,
nagaraj

Entry in outbound table not found

i am using we19 trying to do standard outbound processing for idoc mbgmcr02
i use receiver Port internal and partner abc01
         sender Port -
and partner abc02
in we20 is set up partner
abc01   type ls   in outbound parameter area i see mbgmcr
now in 19 when is use as receiver partner abc01 i get the following error
entry in outbound table not found
/abc01/ls//mbgmcr   message no 400   id E0
can anyone direct me to what i am doing wrong?????????????????/

Hi Janice,
See these..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/71/9bbdde2f66454bb9771170369bae81/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2d/f371e4d24a11d289810000e8216438/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/dc/6b80c243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/f0/08ef0d06b111d286e2080009b98822/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
cheers,
Prashanth

Entry in outbound table not found in PFAC

Good day all.
I'm facing an error "Entry in outbound table not found" when I try to create assignment PFAC (Responsibility Rules).
Any body have an answer to solve this issue?

Are you trying to do something related to IDOC/Partner profile related responsibilities?.

Status 29: Error in ALE service : Entry in outbound table not found

IDoc: 0000000003560240 Status 29: Error in ALE service
Entry in outbound table not found
No partner profile (outbound parameter) could be found using the following key:
/0000000000/LS//YHROT_XXM_IN////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Procedure
Please check the EDI partner profiles.
But The IDOC befor this and after this is successfully run.
And even after reprocessing also it is giving same error.
After checking Contorl record, we found that there is no data in receipant Info in Partner Tab.
What would be the issue.
Please suggest.
Thanks & Regards,
Monika

Hi ,
Thanks for your reply.
We are using one custom message type.
I would like to give you example of exact scenario.
Suppose my IDOC has large amount of segments then ,
It is dividing as
1st IDOC : Control record ....header and data segments
2nd IDOC : only data segment
3rd IDOc : only data segment
4th IDOC : data segment and Trailer.
In this way, I am getting all my 4 IDOCs in error.
What should be d reason?
your help will be grateful.
Hi Everyone,
any update?
Edited by: Monika.Dhumal on Feb 14, 2012 11:49 AM

Outbound IDOC - Entry in outbound table not found - urgent urgent urgent

Hi ABAP Guru
Need Serious help. I created Outbound idoc. Custom message type, basic type etc. I created partner profile as well. But when I see my idoc in WE05 I see following error.
Entry in outbound table not found
Diagnosis
No partner profile (outbound parameter) could be found using the following key:
/WEBM/LS//ZBSID////
This refers to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST Test indicator
Anyhelp will be greatly appreciated. urgent.

Hi Subodh ,
You can check whetther u have released idoc and message type after u have created them. Once u have released these idoc and message types , you can use them in your scenario or they will not will be available .
U can refer to below link to check on various parameteres at time ALE-IDOC scenario
(1) /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
(2) /people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide
(3)http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
(4) idoc
(5)http://help.sap.com/saphelp_erp2005vp/helpdata/en/78/2178a651ce11d189570000e829fbbd/frameset.htm--
--This is for Message Control. See the Left Pane in this web page to get the ALE implementation for BAPI's also.
(6)/people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment - Converson Rules Guidelines
I hope this wud solve ur problem.
Regards
Note: Reward if useful

ALE Error 29 - Entry in Outbound Table not found

Hi,
I am getting the following error in the IDOC processing.
IDoc: <IDOC Number> Status: Error in ALE service
Entry in outbound table not found
I have checked the partner profile. It is OK
I noticed that the IDoc record doesn't have the defined port. The value in the port section is empty.
The IDoc message type - CRMXIF_ORDER_SAVE_M
Basic Type: CRMXIF_ORDER_SAVE_M01
Any inputs will be appreciated.

Observations -
I checked the Status records for the IDOC and there are only 2 entries -
1. 01 IDoc Generated and
2. 29 Error in ALE Service - Entry in Outbound table not found

"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

Entry in outbound table not found E0 400

Hi all,
    Can anyone please help me with the below error which i am facing in ALE IDOCS.
status 29: Entry in outbound table not found E0 400
I am unable to see my port name in the created IDOC and the basic type is incorrectly called.
may I know what settings need to be verified.
Thanks in advance.

SAP checks the IDoc control record for outbound IDoc against EDP13 (outbound partner profile table). EDP13 is updated when you create outbound partner profile parameter in WE20
Check if you have created the partner profile outbound parameter in WE20 correctly to match your outbound IDoc control record.
SAP checks partner number, port, partner function of the receiver along with message type, message code and message function. They all should match between WE20 outbound partner profile parameter for your message type and the IDoc control record (EDIDC) segment.
This is the SAP code that throws the error message you mentioned
read table q_edidc index 1.
select single * from edp13
                  where rcvprn eq q_edidc-rcvprn
                  and   rcvprt eq q_edidc-rcvprt
                  and   rcvpfc eq q_edidc-rcvpfc
                  and   mestyp eq q_edidc-mestyp
                  and   mescod eq q_edidc-mescod
                  and   mesfct eq q_edidc-mesfct
                  and   test   eq q_edidc-test.
if sy-subrc ne 0.
    concatenate q_edidc-rcvprn '/' q_edidc-rcvprt '/' q_edidc-rcvpfc '/'
                q_edidc-mestyp '/' q_edidc-mescod '/' q_edidc-mesfct '/'
                q_edidc-test into text.
    condense text no-gaps.
    message a400(E0) with text(50).
endif.

When i try to open iTunes I get error message "MSVCR80.dll was not found"

When I try to open iTunes I get error message "MSVCR80.dll was not found"

Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Getting error in XI"RFC Program Not Found"

Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
Amit

Hi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit

Cant install Itunes on my work computer, get error message Apple Application support not found, so i uninstall and reinstall again and its the same message

cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

IDOC error : Entry in inbound table not found

Hello all...
Iam gettin IDCO error when im processing inbound IDOC
(basic type :FIDCCP02 and message type:FIDCC2) like..
<b>"Entry in inbound table not found..."</b>
<b>in diagnosis:
Noinbound partner profile could be found with the following key:
    /XXXHUB/LS/LS/FIDCC2//// ..</b>
but:
I maintianed XXXHUB in logical system ( tcodeSALE )    and
in WE20 i maaintianed the parner profile in partner type LS with partner number XXXHUB   and also added message type FIDCC2 with process code FID2 ...
what else need to do/configure?....
let me know if u need more info...thnaks..

Thanks guys...for your answers...
there was some problem with message variant i assigned in the inbound parameters of sending system( XXXHUB)in the partner profile..( we20)...now i removed it...it is working fine..
so what's the problem if I assign the message varaint.do i have to declare the message variant anywhere?....
one more thing...
iam receiving idoc from XXXHUB to my DEV client200...i want to make clear which parameters(inbound/outbound) i have to maintain in WE20
for sender : XXXHUB (parter type LS).... inbound or outbound? ( i maintained both)
for recipient :DEV200 ... inbound or outbound?(i maintained inbound)..
Thnaks....

Regarding Getting Error in Idoc .... Outbound table not found

Similar Messages

Maybe you are looking for