Regarding GP Process for Adobe Forms
Hi,
I had created a form through adobe life cycle designer and i want to use this form for GP process in portal.I had configured GP process for adobe and i followed time off process document but am unable to do the same process for a new form .
Please help as i'am new to this GP process
with regards
Pradeep.B
Hello
I would suggest trying to configure the parameters using the Config Tool. Here is a small procedure to help you with the navigation:
1.Open the Config Tool.
2.Navigate to cluster-data -> template <name of template> -> instance <name of instance> -> services -> caf/eu/gp/model.
The template represents the usage type installed on your server (for example, EP). It consists of one or more instances that can be configured in a different way.
3.Modify the required system parameters:
a. On the Service properties screen, select a parameter from the table.
b. In the Custom value field, enter a value for the parameter.
c. Choose Set.
The new value appears in the Value column.
In the Template value field, you can see the default value (if any) of the parameter you have selected. You can restore the default template value for any parameter by choosing Restore to Template.
Hopefully, this way round it will work
Best regards,
Petra
Similar Messages
-
Reg HCM Forms/Processes with Adobe Forms
Hi,
Details of the differences between HCM Forms and Processes with Adobe Form based PCR's and the recommendations for the selection between the same. Point of view on which one can be used.
Regards,
Sujana
Edited by: Sujana Reddy Kumbham on Feb 9, 2009 9:06 AMSAP_PA backend service EXPECTS either a hardcoded/configured subtype OR a "*" for all available subtypes (which won't work in your case). What you "could" do is get creative with "rules" and check if values are entered, and then if so, do the operation for your subtype.
What you will need to do, which is what I do a LOT because of issues with SAP_PA is to actually make you update/changes in a backend function module (triggered in workflow). Now, things get a bit more complicated.....
Priod to EhP3, you could just call the ol' infotype operations function module in your own FM to do the change. However, from EhP3 and onward, you will need to do this via classes (same used by decoupled infotype framework.
Soooooo......time to get creative with your solution. -
Configuration of Guided Procedures for Adobe Forms
Hi all,
we are about testing the Guided Procedures with Adobe Forms.
I found 3 documents here in SDN:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9ea34c2-0701-0010-e2a2-d8e9cd6d85dc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/06717aea-0c01-0010-b28f-e6494458788f
My problem now is the configuration and the understanding of the "Web Service Security" in the Visual Administrator.
In the mentioned guides above it is written to choose "SLD" for the URL and the following three values under "Synchronize with System Landscape":
System Name:
WS Name: {com.adobe/AdobeDocumentServices}{AdobeDocumentServicesAssembly.jar}
WS Port: {com.adobe/AdobeDocumentServices}{AdobeDocumentServicesAssembly.jar}ConfigPort_Document
Now my questions:
1. According to the guides it seems that the ADS must be installed on the same J2EE where the central SLD is running. Is that a must? I don´t hope so!
2. What do I have to take for ? The SID and machine of the SLD or of the J2EE where the ADS is installed (this would be my own Portal)?
3. My portal is of version Netweaver2004s SP10, my SLD ist of version 6.40 SP18.
Could this be a problem here?
Thanks,
Rossihi
Refer these docs
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm">Configuration of GP for Adobe Forms</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e99cff7a-0601-0010-dea3-e8166c7a7f20">SAP CAF Application</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9ea34c2-0701-0010-e2a2-d8e9cd6d85dc">Configuration for GP</a>
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_gp/~form/handler">Limitations and known issues for Adobe forms in GP</a>
\<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed">Creating a Form-based Process(Adobe)</a>
Thanks & Regards
Harsimran Kaur -
Can any one tell me step by step guide of Guided procedure for adobe forms.
Hi,
Can any one tell me step by step guide of Guided procedure for adobe forms.Can any one give me docs of that if possible.
My personal id is..
[email protected]
Regards,
Gurprit Bhatia
Message was edited by:
GURPRIT BHATIA
Message was edited by:
GURPRIT BHATIAhi
Refer these docs
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm">Configuration of GP for Adobe Forms</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e99cff7a-0601-0010-dea3-e8166c7a7f20">SAP CAF Application</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9ea34c2-0701-0010-e2a2-d8e9cd6d85dc">Configuration for GP</a>
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_gp/~form/handler">Limitations and known issues for Adobe forms in GP</a>
\<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed">Creating a Form-based Process(Adobe)</a>
Thanks & Regards
Harsimran Kaur -
Problem with Configuration of GP for Adobe Forms
Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, MarianoHi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you*************** -
Need to configure output type for adobe form
Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
ChandraHi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it. -
How to create a Webservice for Adobe Form(I need Coding)?
Hi,
I need coding for Webservice inorder to define the context structure for Adobe Form.
In AdobeForm:
1) I create a dataconnection and while creating it i need to give WSDL Url.
2) I have created it.
3) But iam not getting the Context structure in the Dataview.
For this wht coding i need to write in WSDL File?
Any Help is Highly aprreciated with Points.
Very urgent requirement?Hi,
I'm not exactly sure what your problem is.
A description on how to call web services can be found in my blog:
/people/juergen.hauser2/blog/2008/02/25/using-web-services-with-sap-interactive-forms-by-adobe-overview-tips
If you are facing an issue with what is displayed in the data view for the WSDL data connection (i.e you are missing nodes) you could try to use Designer 8.0 instead since it cotains bug fixes in that area.
Regards,
Juergen -
Standard print program for Adobe Forms
Hi all -
Does anyone know if there was a standard print program delivered for the predelivered Adobe form F110_AVIS_INT? And if there is - what is it? Is there any document anywhere to determine predelivered print programs for Adobe forms?
Your help is much appreciated!
Thanks
AbbyHi
In SAP you can check for the Print Programs in Tcode <b>OB96</b>
which gives assignment of programs to script layouts
see the links related to Adobe forms
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji -
Docs needed for Adobe forms development in ABAP Workbench
Hello Friends,
I need documents on how to develop adobe forms using abap workbench in SAP R/3 system.
Please send the documents to [email protected]
Points will be rewarded.
Regards,
Bruce.Hi Bruce,
I have emailed you some documents for Adobe forms development in the ABAP workbench.
In addition you can also check the following links.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm</a>
These are sample WebDynpro Examples you will find in se80
WDR_TEST_ADOBE
WDR_TEST_ADOBE_PDF_ONLY
Hope this helps. -
How to create a spool job for adobe form without dialog
Hi All,
I have a requirement like below.
I need to generate a spool for Adobe form output and that sholud be without print parameters dialog popup.
What are the parameters i need to pass to the FP_JOB_OPEN function module.
Solutions will be appriciated.
Thanks in advancehi,
I think the following document will help you....
http://help.sap.com/saphelp_nw04s/helpdata/en/48/8144ad5999426facb9b77bf0c1e868/frameset.htm
Thanks and Regards
shanto alooor -
Enhancement pack for adobe forms
Hi,
Can anyone please tell me about the minimum enhancement pack required for Adobe form?
Due to some reason My Adobe interactive forms are not working and some one suggested me to use enhancement pack 4.
Client is not ready to use Eh P4 in any case. Any osolution for this problem? Like any SAP notes to apply which will have sale affect as of EhP4.
Regards,
NikHi Nikhil,
Is ADS component is installed in your system ?
Have you done ADS configuration ?
Could you please paste exact error message ?
Thanks
Sunny -
How to create Output device for Adobe forms
Hi,
SWIN/SAPWIN output device types are not working with Adobe forms. How to create a output type for Adobe forms.
Thanks,
Mathivanan.Ghi Mathivanan,
This might help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/c8/7f065c7363f14c84a97a3687aa7e62/frameset.htm
Regards,
Runal -
Hi experts ,
Can anyone guide me for writing a driver program for ADOBE forms ( created using SFP transaction) . I have created the form but dont know how to run it using a driver program since i m new to SFP.
Plz help me.
Message was edited by:
suchita phulkarSuchita,
You can check this code.. This is purley to run the ADOBE form, above one is to run a smart form.
*& Form print_form
* Subroutine to print the form
FORM print_form .
DATA : l_fmname TYPE funcname,
l_params TYPE sfpoutputparams,
l_docparams TYPE sfpdocparams,
l_formoutput TYPE fpformoutput.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'Z_CERT_CONTINU_FORM'
IMPORTING
e_funcname = l_fmname
* E_INTERFACE_TYPE =
* l_params-getpdf = 'X'.
l_params-nodialog = ''.
l_params-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = l_params
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
l_docparams-langu = 'E'.
CALL FUNCTION l_fmname
EXPORTING
/1bcdwb/docparams = l_docparams
g_regis = g_regis
g_date = g_date
g_frmname = g_frmname
g_comp = g_comp
IMPORTING
/1bcdwb/formoutput = l_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
* E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " print_form
Thanks,
Sreekanth
<i>*-- Please close the post and do not forget to reward if it helps you</i> -
Driver program for adobe form error no job started
Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help. -
Good morning everyone! I would like to ask how can i subscribe for adobe forms central 11.99$ per month. I am currently here in United Arab Emirates. I really need to use this application cause it will benefit me a lot in my work. Thanks!
Hi,
OK. Following instructions, I've uninstalled the old Flash Player and installed the right one, and videos are now playing. Thanks for pointing me to the other posts on this site. YouTube and other videos are now playing
Some of the videos still play jerkily (they don't stream evenly). A few stream evenly once they've been allowed to buffer fully. (I think I'm using these terrms correctly.) Is this solely caused by low bandwidth, or is there something—an adjustment of some kind—that I can do with Flash Player to have online videos stream evenly, even from the moment I start them?
As I mentioned, to bypass this uneven streaming while watching online, I download the videos and watch them usually using Quicktime Player 7.6.4. Still, they don't always play evenly, but for the most part do.
I've just tested bandwidth and I'm told:
5.63 Bbps Download speed
0.63 Mbps Upload speep
Rafael
Maybe you are looking for
-
PL/SQL: ORA-22806: not an object or REF when Using Record in Package
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 I have declared a record type in my package create or replace PACKAGE MYPKG AS TYPE MYREC IS RECORD (VAL1 varchar2(20), val2 date); PROCEDURE display_error (pSQLERRM number); PROCEDURE P
-
Unable to see the file share content via UNC path
I have run a cmd command to modify the NTFS permissions on a few home directories. That command has helped me to remove all from the ACL of shared folders; and add domain admins into it. I am an admin on that Windows server. Now, whenever I try to ac
-
Mulitple Photo Editing with PS Elements as iPhoto 6 Editor
Currently I am using PS Elements 4 as my iPhoto editor. When I 'select all' within an Album and select 'Edit' PS Elements only opens 4 photos regardless of how many I selected within iPhoto. Even if a manually select more than 4 photos in iPhoto, PS
-
Help SAP Mobile Infrastructure 7.0 on NW 2004S
Hi all, I am a Newbie, and i really need some help. After 2 weeks i installed: On the <b>Server:</b> side (machine 1) SAP NW 2004s SR1 (ABAP + JAVA + MI) / ORACLE / Windows Server 2003 after that i update the system to: ABA Support Package 10 for 7.0
-
Can I publish to my iWeb website?
I have a website i created in iweb and its published on my external server ... can i publish my calendar to my website to have it be viewed by all?