Regarding GRN layout...

Hi Everybody,
Which is the standard layout for GRN & Goods Issue. Can it be replaced by the user developed script thru SPRO? If it is so can u please explain the procedure to do so.
Regards,
Varadharajan.S

Hi,
some customizing in spro
(click the icon 'doc' for detail documentation on each customizing)
~ 'business info warehouse'
maintain permitted characters (transaction rskc), fill with ALL_CAPITAL to allow all special characters
printer setup (trx SPAD)
parameter for aggregate (trx rscustv8), aggregate change run, this can be done later or adjust if finding any loading problem
upload mode for master data
ods setting (trx rscusta2), ods data loading performance impact
~ link to other system
maintain control parameter for data transfer(rscustv6) - data loading
general connection setting
define logical setting, assign logical setting to client etc.
link between bw and flat file (rscustv1)
setting for flat file upload, override in infopackage
link between sap system and bw (rscustv3)
do the first time after bw installation
~ transport setting
change source system after transport (RSLGMP)
for mapping source system, done in TARGET (qa/prod)
~ reporting relevant setting
activate personalization ... (rs_pers_activate)
mostly all are used, but can be done later
~ web based setting
igs setting (if you use chart in web reporting)
~ bw enhancement
- can be done later based on requirement, variable exit, virtual char/keyfigures are customized here.
~ general setting ..
important
also take a look this thread
Re: BW implementation
hope this helps.
Regards,
Bhaskar

Similar Messages

Issue regarding Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART in SAP TPM IP

Gurus,
I am facing an issue regarding SAP TPM IP ( HANA)
I have 3 Infoproviders
Planning infocube, Planning DSO1, Planning DSO2 and i created multiprovider and added these 3 infoproviders into it. I have created Aggregation level on multiprovider. Created Bex Input ready query on Aggregation level.
Issue is Planning layout is not getting rendered and is dumping at : CL_RSDRC_TREX_QUERY_LAYER ~ _GET_PARTPROVS_WITH_TREX_PART.
I tried debugging it and found it is trying to read i_r_pro -> n_ts_part. It is populated with only 3 values (i.e. 2DSOs and 1 Cube), whereas <l_partprov>-partprov is referring to Aggergation level, hence read statement isn't successful, it is dumping.
The class CL_RSD_INFOPROV_CACHE->GET() method is trying to populate the N_TS_PART.N_TS_PART uses P_R_INFOPROV table which seems to be already populated. So, I debugged all the below methods to find out how the P_R_INFOPROV but couldn't find any clue.
Can any one help,it would be really help.
Thanks
Ashok

Hello Gregor,
On the launch of planning layout it throws an error message:
Planning is not possible RSCRM_IMP_CORE008.
When I debugged, i got to a point wherein
particular Real Time Planning DSO is
not getting retrieved under the MultiProivder in below class.
Class: CL_RSCRM_IMP_ACTIONS_SERVICE, Method: GET_INFOPROV is not
returning the real time Info-Provider Name(i.e. Planning DSO)
underlyingthe Multiprovider.
I've also tried to run the report mentioned by you for the Multiprovider but issue still exists.
Let me know, if you have any pointers on this topic.
Thanks,
Jomy

Hi regarding creating layout

hi pupil,
i have a report
where i need to show the layout in this format
Abc enterprises
Xyz lane, cross roads,          this is vendor name and address (in middel of page) top vendor name and down of that address
Mumbai 400001
Pf no :
Esic no:             these are the feilds which shows the value   in row wise it should be in left of pagea all 4
Pan no:
Cst no:
Open purchase orders:
Closed purchase orders: ;;;     these are the details of orders and all etc. this should be down of the above 4 fields
Qty delivered:
qty pending:
payment done:
payment pending:
my question is i have to show this report in the above format, how can i design this in xcel or wad or any format. but i want to show this in that style.
pls sugest me

Hi ,
You can save the query as workbook and write lookup for getting the data(address)
Regards,
Aparna

Question regarding Form layout in Flex

Hi guyz. Today had a look at form layout
<mx:Form id="form">
 <mx:FormItem label="horizontal:">
 <mx:Text text="test"/>
 </mx:FormItem>
</mx:Form>
gives the output in the format 'label' - 'textbox'. But i want to change the orientation like
label
checkbox
How can i do that. Please explain in detail.
Thanks and Regards,
Karthik Jayaraman

savmoy wrote:
Since php files are run on the server side, can I assume that my JavaScript validations (which are part of a php file) will be done on the server side as well, and therefore are secure?
No. The PHP server processes the PHP only, and then sends the output to the browser, which is where the JavaScript will be executed.

Need a help regarding planning layout

Hi,
I am designing a planning layout in OPO1. I have defined a column for Cost Eelemnt and next four columns with Period and Fiscal years, for these each column in the header line, i typed "&$1". Also created a Total Forecasted column for the sum of these four columns. While Saving the layout getting error as "Text variable &$1 has an invalid replacement rule." When checked the message, under procedure it says "If you want the replacement to occur as specified, you must define the missing characteristic in the layout. Otherwise enter a characteristic which has already been selected."
It would be great, if any one can tell about defining the missing characteristics in steps.
Regards,
Naren.

Hi Sampath,
Planning layouts are basically used for planning the costs, here you can define user defined layouts ana assign the same to planner profile..
after that, you can default the planner profile KPO4 and run the t-code CJR2 to plan the costs.
Basically it is used for cost planning
Rgds
Sudhir Reddy

Regarding Table Layout

hi
the normal table style is that the coloums headers are on the top and their values are below them.
how can we set the table layout such that the coloums headers are palced to the right and there values to left.
waiting for ur kind replies
Regards
Shafi

SKU ab12 sndn13 12sd 231
 Name Nam1 Nam2 Nam3 Nam4
 Photo ph1 ph2 ph3 ph4
the words in bold are columns names and to the right are their values.
Regards
Shafi

Regarding ALV Layout Recovery...

Hello ABAPers,
I Have changed some thing in report and report has been sent to next system,After fixing the problem the layout is gone in development system.
IF i display data and choose one layoout from the icon ,it does not show anything.
Regards,
Jayan.

anyone???

Regarding page layout

Hi,
I've created a delta link for a page programmatically.
And,I added layouts to d page. I have d following issues:
-Now,I wud like to set d default page layout. I used the following statement in my code.But it doesn't work. Also,no error is generated.
myPage.setActiveLayout("narrowWideNarrow");
myPage.save();
-I want to specify the container in which the iViews shud be placed. The following code doesn't work. What should be done?
myPage.addiView(iViewdesc,"myiview",
 "com.sap.portal.reserved.layout.Cont2");
I also tried with this code:
myLayout.setiViewInContainer("testxml",
 "com.sap.portal.reserved.layout.Cont1",1);
-Am not able to change d name of d page. How do i rename it programmatically?
Any help would be greatly appreciated.
Thanks and Regards,
Arun

hi daniel,
I used the following code in the docontent
public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
 try
 IPages iPageSrv = (IPages) PortalRuntime.getRuntimeResources().getService(IPages.KEY);
 Hashtable env = new Hashtable();
 env.put(Context.INITIAL_CONTEXT_FACTORY,
 IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
 env.put(Context.SECURITY_PRINCIPAL, request.getUser());
 env.put(Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_SEMANTICS);
 InitialContext iCtx = null;
 iCtx = new InitialContext(env);
 String folderName = "pcd:portal_content/Practice-I/Subathra/My_page";
 IPage mypage=(IPage)iCtx.lookup(folderName);
 mypage.putAttribute("com.sap.portal.pcm.Title","newtitle");
 mypage.save();
 response.write("hi");
 catch(Exception e)
 response.write("error"+e);
I am getting the following error errorjava.lang.UnsupportedOperationException: Text attribute
I am working in EP6 sp14
Regards,
Arun.

Regarding script layout

Hi Friends, very urgent , plz help me..
How to use greater than command in sap script layout. I Need to check like this: IF &SAPSCRIPT-COUNTER_1& > 10.
But if i used the same its not working.
Regrads,
Venkat.

HI venkat,
First switch on the sap script debugger in SE71 utilities>activate debugger and then check what value is getting populated in SAPSCRIPT-COUNTER_1. Based on the value you can change the condition. Try using GT instead but it is same as > symbol.
Regards,
Kalyan.

Regarding Table Layout (for Orel Goldberg)

Sir
i asked a question few days back. the query was that i want to arrange the table in such a way that columns names are on the left and their values are on the right.
u asked me to provide an example
so here is the example ...........
SKU ab12 sndn13 12sd 231
Name Nam1 Nam2 Nam3 Nam4
Photo ph1 ph2 ph3 ph4
the words in bold are columns names and to the right are their values.
Regards
Shafi

Hello Shafi,
This is how you can achieve such a layout:
Set the desired items (in your example: SKU, Name, Photo) to be Horizontal pivots. then set the Horizontal pivot format to "Item Name in Vertical Pivot Column Header".
you will need to have a vertical pivot for this purpose, so choose an empty field/attribute and set it to be a vertical pivot.
This way, the headers of the horizontal pivots will be displayed in the vertical pivot.
Notice that you can't have a table with no un-pivoted columns, so make sure you keep an empty field/attribute for that purpose.
Last 2 things: set the vertical pivot format to "Hide Pivot Item Name". and also delete the Display Name for the un-pivoted column you are using.
I hope that by following these steps you will achieve the desired result.
Best Regards,
Orly

Regarding customized layout managers

I need a layout manager which is similar to Null layout+Column layout. ie, there will be a single column of components in the container and the user can move the components from one row to another row.
Someone please tell me how to acheve this. I tried using a BoxLayout but moving of components in the container is not working properly.
Regards,
Varun

Layout Managers have nothing to do with Drag and Drop.
I tried using a BoxLayout but moving of components in the container is not working properly.Well, then you are doing something wrong. Using a new layout manager won't solve the problem.
Your code needs to:
a) remove the component from the container
b) drag the component around the screen (I would use a LayeredPane for this
c) add the component back to the container at the correct position
d) revalidate the container to is get layed out correctly.

Regarding va05 layouts

Dear all,
i have a query regarding VA05. After entering data in organizational data section, i am getting output in a alv report.if take the following path i can select another layout.the path is settings>layouts->choose. here i am getting some more extra columns in new layout(selected one). and fetching data corresponding to that field as well. can anybody tell me how to fetch that data in layout.
thanks in adavance,
regards,
vineel

hi
is your driver program is standard one or ZProgram.
executing through VF03/Vf02 please let me know.
if your driver program is not standard. execute it in bacground mode so that spool is generated with all 3 layouts.
or execute it with option "Execute and Print" you will get all 3 layouts as a print imeediatly.
plz reward me if it helps you.
regards,
munvar

Help needed regarding table layouting Issue in CS4

I was trying to layout a table using an Indesign custom script in CS4. The input to the Indesign is a XML file
Please find below the snapshot of the XML file with the table definition:
<Table xmlns="http://ns.adobe.com/AdobeInDesign/5.0/" aid5:tablestyle="_XXY" aid:tcols="6" aid:trows="17"><Cell xmlns:aid5="http://ns.adobe.com/AdobeInDesign/5.0/" aid5:cellstyle="_XYY" aid:ccols="1" aid:crows="1" aid5:tablestyle="_XXY">
Now when the table is layouting it is not taking into account the style of the table nor that of the cell.
Can you please suggest what is the best way of defining the table styles and the cell styles so that the table can be laid out in Indesign with the proper table styles and the cell styles.

Please post in the ID forum.

Regarding ALV layout save

Hi Experts,
I have the requirement in which when the user saves a standard layout in ALV output with default setting checked, an error message should be given stating that 'Standard Layout cannot be set as default'.
Is there any exit available to add this error message in Standard ALV code?
Please provide pointers for achieving this functionality.

You can use the combination of IT_EVENT_EXIT & I_CALLBACK_USER_COMMAND to achieve this functionality.
Read the documentation for these params for details.
BR,
Suhas

Regarding Report layout

Hi Experts,
I am doing classical report in that two of the fields having length of 500 char and
i have to display in multible lines,could any one explain me how we can handle this. we need to do word wrapping for this that means we have to display this in a multible lines.
Thanks in advance.
Sarala.

Hi
U can use
loop at itab.
write: Itab-field1 under itab-field2.
endloop.
Regards
ravi

Regarding GRN layout...

Similar Messages

Maybe you are looking for