Regarding help for selecting module in SAP
Dear Sir,
Myself manish kumar singh still working as an enduser in SD & PP (R/3) module.But now i want to select one module from both of them. But i confuesed for selecting one. I am graduate from commerce side and now persuing MBA. I am working in Excsie deptt. Pls help me for selecting the module and also pls guide me the good institutes for coaching which is chepest and also located in delhi.
Hi Manish,
As in my view PP will be good one.
Regarding SAP training centers, check the below list of all the SAP Authoried training centers where from you can pursue the course:
http://www.sap.com/asia/services/education/centres/partners.epx
Regards,
Subhasha
Similar Messages
-
How to get calender in f4 help for select options in module pool (URGENT)
Hi All,
how to get calender in f4 help for select options in module pool
Please help .
Thanx in advance,
amrutaHi Amruta,
First of all, you can not create select-options directly in module pool.
For creating <b>select-option is dialog prog</b> follow these steps:
1. create your selection screen model as subscreen by:
SELECTION-SCREEN BEGIN OF SCREEN 2000 AS SUBSCREEN.
PARAMETRS: P_MATNR LIKE MARA-MATNR.
SELECT-OPTIONS: S_BISMAT FOR MARA-BISMAT.
SELECTION-SCREEN END OF SCREEN 2000.
2. create a screen ( example 100 ) in your module-pool dedicated for selection-screen. on this screen layout sketch a sub-screen name like subscree_2000.
3. write this bit of code in PBO and PAI of the screen 100;
CALL SUBSCREEN SUBSCREEN_2000.
4. include this code in PBO:
INCLUDING SY-REPID '2000'
6. write user_command of PAI, call screen which is going to executable after selection-screen.
5. create a transcation for this dialog module pool with screen 100.
6. execute this transaction and you can see it's behaving like cool with select-options.
After that in [bprocee on value-request]</b>, use F4_DATE for both from and to option field.
Hope it will solve the problem.
Regards
Krishnendu -
Can i assign a collective srch help for select option in list display
can i assign a collective srch help for select option in list display
Hi,
Yes ,u can assign a collective search help for select-option in list display.
Eg:
Define your select option like this
SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
Regards,
Shiva. -
F4 help for select options based on parameter value
hi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PMhi all,
I need a help to create an F4 help for select options for object id based on parameter value of object type, I mean once an object type is given the f4 help should contain object id's only of that type for each option.
Regard's,
Girija
Moderator Message : Duplicate post locked. Continue with [f4 help for select options based on parameter value |f4 help for select options based on parameter value;.
Edited by: Vinod Kumar on May 17, 2011 1:36 PM -
Add custom field in the F4 help for selecting source field in tcode FMDER
HI,
I an working in FUND MANAGEMENT, i want to add custom field in the F4 help for selecting source field in t-code FMDERIVE.
How this possible.
Regards,
PankajOK
-
Problem on Search Help for select-option
Hi,
Iam working on a search help for select-option,
is there a way to incorporate select-all or multiple
selection on this?
Thanks!Hi catherine,
1. Just copy paste this program.
(It will POPULATE the SELECT-OPTION,
based upon
MULTIPLE Selection,
selected by the user,
in the help provided thru F4IF_INT_TABLE_VALUE_REQUEST.)
2. Eg. is for BUKRS (company code)
3.
REPORT ABC.
TABLES : T001.
DATA : ITAB LIKE TABLE OF T001 WITH HEADER LINE.
DATA : RETURN LIKE TABLE OF DDSHRETVAL WITH HEADER LINE.
SELECT-OPTIONS : BUKRS FOR T001-BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-LOW.
PERFORM MYPOPULATE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR BUKRS-HIGH.
PERFORM MYPOPULATE.
FORM MYPOPULATE.
REFRESH ITAB.
SELECT * FROM T001 INTO TABLE ITAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynprofield = 'BUKRS'
dynpprog = sy-REPID
dynpnr = sy-dynnr
multiple_choice = 'X'
value_org = 'S'
TABLES
value_tab = ITAB
return_tab = return.
IF RETURN[] IS NOT INITIAL.
REFRESH BUKRS.
CLEAR BUKRS.
LOOP AT RETURN.
BUKRS-SIGN = 'I'.
BUKRS-OPTION = 'EQ'.
BUKRS-LOW = RETURN-FIELDVAL.
BUKRS-HIGH = RETURN-FIELDVAL.
APPEND BUKRS.
ENDLOOP.
ENDIF.
ENDFORM.
regards,
amit m. -
Freely Programed Help for select-option field
Hi,
how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
Please suggest where i am doing wrong??
Edited by: kranthi kumar on Dec 29, 2010 6:19 PM>
kranthi kumar wrote:
> Hi,
>
> how can i set freely programmed help for select option field, i mean while adding selection field what are the parameters that are important for freely programmed help.
>
> i have implemented iwd_value_help in one component comp1 and declared the usage of comp1 in comp2 where i actually defined the usage of select-option component.
>
> i used parameter i_value_help_type = if_wd_value_help_handler=>co_prefix_appldev while adding selection field, however when i presss F4 icon, the following message is coming
>
> View WD_VALUE_HELP does not exist within the component WDR_SELECT_OPTIONS
>
> Please suggest where i am doing wrong??
>
> Edited by: kranthi kumar on Dec 29, 2010 6:19 PM
Hi Kranthi,
Please help me to understand your design.
Why would you like to create a Freely programmed value help for select-option?. why not use wdr_select_option directly ? -
Search Help for Hierarchy Node in SAP BW 7.3
Hi Experts,
We were previously using SAP BW 7.1 system and we had a table which used to be maintained through SM30 which has a customed search help on one of the fields for a hierarchy object. And it was working perfectly.
However, one of our systems have just been migrated into 7.3 version and the above functionality is no longer working.
This is what is happening now:
- User selects a hierarchy and after selection nothing is being displayed on field on the table.
We have tried to debug this customed search help in both environments to distinguish what is wrong. We have noted that a standard function module (RRSV_IOBJ_VALUE_OUTPUT) is not behaving similarly. In 7.1 system, the C_T_DATA table is being filled whereby in the 7.3 system, it is empty.
Do you think this is the issue?
Please do advise and propose what can be done to make it work. Or any idea on how to create a new search help for a hierarchy node in 7.3?
Thanks in advance.hi,
one more thing i will like to add here is in BW 7.3 you get a new security admin feature that allows you to make mass changes to authorizations instead of one-by-one. This can be done by cut-and-paste in a worklist, hierarchy nodes, and you can also add users to multiple analysis authorizations.
The u2018newu2019 authorizations has both the data value and hierarchy restrictions. You can still build using the u201CRSECADMINu201D transaction
Also make sure that all objects are in the TLIBG library and they will be 'shielded' during the upgrade.
regards
laksh -
Reg::Error in XMLDecryption algorithm for adapter module in SAP PI
Hi Experts,
I have developed a custom java code for encryption and decryption for XML to be included in adapter module in SAP PI using SAP netweaver.My decryption code is working fine for stand alone java application.But when I create EJB project and deploy it I get no error..But in communication monitoring of SAP PI i get the below error
Error: org.apache.xml.security.encryption.XMLEncryptionException: No Key Encryption Key loaded and cannot determine using key resolvers
I included xmlsec1.3.0.jar file as external library..
I would be grateful if you could suggest any solution for the above issue.
Thanks
PriyaHi Priya,
I am working on the same senario if Uhave idea plz help me on it.
Regards,
Prasad. -
HI ALL,
please help me.
i need to get f4 help for zlsch field, if i give only one company code its working fine , if u give 2 company codes its not working,even though i kept s_bukrs-high code.
please help me
its urgent
s_bukrs FOR lfb1-bukrs no intervals OBLIGATORY,
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-low.
data : l_dyname type standard table of DYNPREAD with header line.
l_dyname-FIELDNAME = 'S_BUKRS-LOW'.
append l_dyname.
l_dyname-FIELDNAME = 'S_BUKRS-HIGH'.
append l_dyname.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy-cprog
dynumb = sy-dynnr
tables
dynpfields = l_dyname
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh s_bukrs.
loop at l_dyname.
s_bukrs-low = l_dyname-FIELDVALUE.
s_bukrs-SIGN = 'I'.
s_bukrs-OPTION = 'EQ'.
append s_bukrs.
endloop.
SELECT zbukr
zlsch
FROM t042e
INTO TABLE gt_t042e
WHERE zbukr IN s_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield ='ZLSCH'
dynpprog = sy-cprog
dynpnr = '1000' "sy-dynnr
dynprofield = 'S_ZLSCH'
VALUE = '*'
value_org = 'S'
TABLES
value_tab = gt_t042e
RETURN_TAB = return_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3Hi,
The code will not get executed for s_zlsch-high.
Put the code in which you are using the function module for fetching the values in a PERFORM.
Call this perform twice.
Once for s_zlsch-low and once for s_zlsch-high.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-low.
perform <perfname>.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_zlsch-high.
perform <perfname>.
Reward if helpful.
Regards. -
Value help for select-option not filling selection field
I'm having some problems with a value help on a select-option. I've managed to get the value help displaying the correct values but for some reason can't get it to populate the selection field after I've selected a record.
I have the following call:
wd_this->m_handler->add_selection_field(
i_id = 'SHORT_D'
i_description = 'Program'
it_result = lt_range_table
i_read_only = read_only
i_value_help_type = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_SEARCHHELP
i_value_help_id = 'ZPROGSTUDY' ).
where ZPROGSTUDY is a new search help I've set up with an exit to retrieve the values.
Any ideas ? Thanks.Hi Malcolm,
The code you have is OK. I copied your code into a test program and it worked as expected.
I used a search help where the possible values are populated in the search help exit, exactly as in your case. The only time it did not work was when read_only = X, but that is obvious also from a visual point of view since the input field is greyed out in that case. The popup also tells you is in RO mode...
Does your SHLP work when you test it from SE11? Returns values?
SAP provides a lot of WD4A sample code, see for example component WDR_TEST_SELECT_OPTIONS look for
select-option fields > special cases > input helps > Non field-specific input help using search help
Regards,
George -
F4 Help for select-options.
Hi Experts,
I need to use F4 help for a select - options field from a particular table.I have written the below code and it worked well.
FORM sub_show_help.
SELECT bukrs
FROM zfica_accurate
INTO TABLE gt_accurate.
delete ADJACENT DUPLICATES FROM gt_accurate.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_CMCODE'
window_title = 'COMPANY CODE'
value_org = 'S'
multiple_choice = 'X'
TABLES
value_tab = gt_accurate
return_tab = gt_return.
s_cmcode-sign = 'I'.
s_cmcode-option = 'EQ'.
LOOP AT gt_return INTO gw_return .
s_cmcode-low = gw_return-fieldval.
APPEND s_cmcode.
ENDLOOP.
READ TABLE s_cmcode INDEX 1.
IF sy-subrc = 0.
gw_dynpread-fieldname = text-018.
gw_dynpread-fieldvalue = s_cmcode-low.
APPEND gw_dynpread TO gt_dynpread.
UPDATE THE SCREEN FIELD VALUES
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = sy-repid
dynumb = sy-dynnr
TABLES
dynpfields = gt_dynpread
EXCEPTIONS
invalid_abapworkarea = 1
invalid_dynprofield = 2
invalid_dynproname = 3
invalid_dynpronummer = 4
invalid_request = 5
no_fielddescription = 6
undefind_error = 7
OTHERS = 8.
ENDIF.
IF sy-subrc <> 0.
MESSAGE i003.
ENDIF.
The problem is , I need to create a new type for s_cmcode(select-option ) field with the same structure as the select-option and the code is as below. I have created an internal table gt_sfield similar to s_cmcode . I have replaced s_cmcode with gt_sfield but the below code is not working. Its the same as the above program but its not showing up the values in the field.Could anyone please help me.
fORM SUB_SHOW_HELP.
SELECT BUKRS
FROM ZFICA_ACCURATE
INTO TABLE GT_ACCURATE.
gt_sfield[] = s_cmcode[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'BUKRS'
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
WINDOW_TITLE = 'COMPANY CODE'
VALUE_ORG = 'S'
MULTIPLE_CHOICE = 'X'
TABLES
VALUE_TAB = GT_ACCURATE
RETURN_TAB = GT_RETURN.
LOOP AT GT_RETURN INTO gw_return.
gw_sfield-SIGN = 'I'.
gw_sfield-OPTION = 'EQ'.
MOve gw_return-fieldval to gw_sfield-low.
APPEND gw_sfield to gt_sfield.
ENDLOOP.
READ TABLE gt_sfield INDEX 1 INTO gw_sfield .
IF SY-SUBRC = 0.
gw_dynpread-fieldname = 'S_CMCODE'.
move gw_sfield-low to gw_dynpread-fieldvalue.
APPEND GW_DYNPREAD TO GT_DYNPREAD.
UPDATE THE SCREEN FIELD VALUES
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = SY-REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = GT_DYNPREAD
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
UNDEFIND_ERROR = 7
OTHERS = 8.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE I003.
ENDIF.
ENDFORM.Hi,
The fucntion module 'DYNP_VALUES_UPDATE' should be used only for updating the screen field values. In your case you are updating the internal table using this function module.
Thanks
Pavan -
Search Help for selection screen select-option
Hi Friends,
I want have search help for KSCHL with only the condition types starting with Z. I need your help to do that.
Thanks in Advance.hi,
chek a sample code, for restricting the serach help.
REPORT Z_CONECT_A.
Include type pool SSCR
TYPE-POOLS sscr.
TABLES : marc.
defining the selection-screen
select-options :
s_matnr for marc-matnr,
s_werks for marc-werks.
Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
Auxiliary objects for filling RESTRICT
DATA : optlist TYPE sscr_opt_list,
*** type sscr_***.
INITIALIZATION.
Restricting the MATNR selection to only EQ and 'BT'.
optlist-name = 'OBJECTKEY1'.
optlist-options-eq = 'X'.
optlist-options-bt = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_MATNR'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY1'.
APPEND *** TO restrict-***_tab.
Restricting the WERKS selection to CP, GE, LT, NE.
optlist-name = 'OBJECTKEY2'.
optlist-options-cp = 'X'.
optlist-options-ge = 'X'.
optlist-options-lt = 'X'.
optlist-options-ne = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_WERKS'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY2'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = restrict
EXCEPTIONS
TOO_LATE = 1
REPEATED = 2
SELOPT_WITHOUT_OPTIONS = 3
SELOPT_WITHOUT_SIGNS = 4
INVALID_SIGN = 5
EMPTY_OPTION_LIST = 6
INVALID_KIND = 7
REPEATED_KIND_A = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards
anver
<b><i>if helped pls mark points</i></b> -
Hi experts
Is it possible to place F4 help for the function module import parameter like If we excute the FM from se37 the input box should need the F4 help.
if possible , let me know the sample code
thanks
saiyes you can do that..
in side the source code ..
write the select statement according to requirement and pass the internal table to below function moduel and return field to yor help field..
call the below fm inside the function module..
'POPUP_WITH_TABLE_DISPLAY' or 'REUSE_ALV_POPUP_TO_SELECT'
see the sample code...
FUNCTION Z_MFG_PLANTS_F4 .
"*"Local Interface:
" IMPORTING
" REFERENCE(W_WERKS) TYPE WERKS OPTIONAL
" IMPORTING
" REFERENCE(W_MATNR) TYPE MANTR OPTIONAL
* Alv popup display
DATA : gc_selfield TYPE slis_selfield,
gt_fieldcat_drd TYPE slis_t_fieldcat_alv WITH HEADER LINE.
p_werks = W_WERKS.
data : begin of t_marc occurs 0,
werks type werks,
matnr type matnr,
end of t_marc
select matnr werks from marc into table t_marc where werks = p_werks.
IF t_disp[] IS NOT INITIAL.
gt_fieldcat_drd-seltext_m = 'Material'.
gt_fieldcat_drd-fieldname = 'MATNR'.
APPEND gt_fieldcat_drd.
CLEAR : gt_fieldcat_drd.
gt_fieldcat_drd-seltext_m = 'WERKS'.
gt_fieldcat_drd-fieldname = ''WERKS'.
APPEND gt_fieldcat_drd.
CLEAR : gt_fieldcat_drd.
* Allow the user to select the required plant
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
i_title = 'Material Selection for Plant'
i_selection = 'X'
i_screen_start_column = 5
i_screen_start_line = 5
i_screen_end_column = 70
i_screen_end_line = 20
i_tabname = 'T_MARC'
it_fieldcat = gt_fieldcat_drd[]
IMPORTING
es_selfield = gc_selfield
TABLES
t_outtab = t_MARC
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
READ TABLE t_MARC INDEX gc_selfield-tabindex.
IF sy-subrc = 0.
w_matnr = t_matnr-matnr.
ENDIF.
ENDIF.
ENDFUNCTION.
Prabhudas
Edited by: Prabhu Das on May 21, 2009 7:35 PM -
Regarding help for merep_sbuilder and merep_mon transactions
Hi,
Where do I get help for the MI related transactions in SAP WAS like merep_sbuilder and merep_mon
I want help documentaion to make out the log shown in merep_mon.
There are also lot of options while enabling the syncbo like push etc. What is the significance of these options.
Do suggest where I can find proper documentation for the above
Regards
Raja SekharHi Raja,
just go through this troubleshooting guide for smart synchronizations.
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/909d75c3-0801-0010-5f92-920a78c53daa
from this document , u will get a clear picture on merep_mon and transactions for troubleshooting .
just refer this Installations document also ..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/mi/best practices for sap mobile engine 2.5/bblibrary/documentation/mi25_installation_guide.pdf
<<
There are also lot of options while enabling the syncbo like push etc. What is the significance of these options
>>
r u talking about the mass data upload in the case of T01 n t51 SyncBos.?. make it clear.
Regards
Kishor Gopinathan
Maybe you are looking for
-
Unable to split the only visible partition (C) on a fresh system - 4 primary partitions
Hello, tl;dr I am probably stuck with 4 primary partitions (two WINRE, EFI, and C), and unable to split C on a fresh system installation from HP DVDs. 320GB HDD has failed on my G6 2233 HP laptop. I've mounted a 500GB replacement, and done the follow
-
Nokia 5800 - keep screen on when charging?
Is there a way to keep the screen of the Nokia 5800 turned on when the phone is plugged into a charger. This functionality was available on many older generation (non-Symbian) Nokia phones, but I can't find such a setting on the 5800. Similarly, it w
-
I have an iPhone 3G and the option to enable wireless is greyed out. It has worked before. Can anyone assist?
-
Sales person in the service call report
Hello I am using PLD to make a new layout for the service call report. I would like to add a column with the sales person of the customer. I have already added the field from the table, but i just get a blank column. Does anyone know how I can do it?
-
JDBC to Synchronous ABAP Proxy
Hello, I have one scenario where i am sending data from JDBC Adapter(Communication Channel 1) to ABAP Proxy(Sync)(Communication Channel 2) and as response ABAP Proxy send back data to JDBC Adapter(Communication Channel 3). So is it possible without B