Regarding hr forms of time statement for displaying in the ESS

hi experts,
i m trying to activate the hr-form name 'sap_tim_99_0001' by going through the tc-hrforms,but it is giving this error plz help me to sort out this probkem,
Generated print program contains a syntax error
Message no. HRFORMS011
Diagnosis
Generated print program /1PYXXFO/SAP_TIM_99_0001_PRNT contains a syntax error in line 144 of include /1PYXXFO/SAP_TIM_99_0001_PRNT.

Hi Rajat,
I am facing same problem could please explain in details how u have solve this problem
Thanks in advance

Similar Messages

How to display the form of time statement, which was created in trans. PE50

Hi to all!
I have created the salary statement with the PE50 and I want the form to be displayed in the ESS.
How to display this form?
Thank.

Dear Siddharth,
I am getting this error for Time Statement here also we have used PE50 to create time statement for r/3 purpose, Which would be feasible one to work with for getting the display of Time Statement.
Form TH_TIME_ST does not exist
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Form TH_TIME_ST does not exist
     at java.lang.Throwable.<init>(Throwable.java:194)
     at java.lang.Error.<init>(Error.java:49)
     at com.sap.pcuigp.xssfpm.java.FPMRuntimeException.<init>(FPMRuntimeException.java:34)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:357)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.tim.per.selection.VcTimPerSelection.onInit(VcTimPerSelection.java:238)
     at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelection.onInit(InternalVcTimPerSelection.java:246)
     at com.sap.xss.hr.tim.per.selection.VcTimPerSelectionInterface.onInit(VcTimPerSelectionInterface.java:162)
     at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelectionInterface.onInit(InternalVcTimPerSelectionInterface.java:144)
     at com.sap.xss.hr.tim.per.selection.wdp.InternalVcTimPerSelectionInterface$External.onInit(InternalVcTimPerSelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:467)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:359)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:755)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:278)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:722)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:623)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:215)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:113)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:70)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:818)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1265)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:750)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:715)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:113)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:107)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:278)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:623)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:215)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:113)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:60)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:733)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:101)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Appreciate your help on this.
Regs,
Raj

Using time delay for displaying tooltips

Hi guys, hope you are all fine,
I have a little problem, i need to use time delay for displaying a tooltip for a specific amount of time but i don't know what code to use.
Can you please give me a hand? I also try to find out the right way on how i can use tooltips when using a Jpanel and paintComponent. I amcurrently using setXORMode but this is not too efficient.
Thanks guys,
Regards,
John.

Ok guys, for any other who need this info, you get time delay by this:
try {
Thread.sleep(time);
} catch (Exception e) {}
// in "time" you put an integer value which represents milliseconds

Hello! please change the time setting for Russia in the hour ahead. Unas in the country while now and there is one year, or winter.

Hello! please change the time setting for Russia in the hour ahead. Unas in the country while now and there is one year, or winter.

It is November 9, and the problem still persists. The Time in Russia is reported by OS X as one hour behind... Apple, Please fix this problem.

How can I automatically email the completed form as a pdf for signing to the respondent?

how can I automatically email the completed form as a pdf for signing to the respondent?

Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
Hopefully this will get your messages sending/receiving to each other.

Unable to view Time-Statement for the Chosen period in Portal

Hi ,
I am unable to get the timestatement for the Chosen period in Portal
What are the configurations that are to be made for the Timestatements to get dispalyed at the Portal end .
At r/3 end , we have a timestatement data for an employee and moved that to a Cluster B1. so how does it reflect in the portal.
What am i missing to get that Timestatement to get displayed on Portal
Regards,
Vijay

Hi there,
As of what I see it is an MSS scenario.In this you used a business package, iviews. There should be a webdynpro application or BSP application running at the front end to get this out.
Now, as you mentioned at the R/3 end you have a time statement. So if your web application is programmed properly, it will fetch the req. time data from backend. What you need to see is that the web application is bug free.
You need to do some debugging there, if the right data is fetched.
but before all this, you need to check if your portal worksets in the business package are set up properly, along with the iviews, pages.
Regards,
Bharat
Message was edited by:
Bharat

Seconds to Time Conversion for Display on a Cross-Tab

Post Author: [email protected]
CA Forum: Formula
I am doing a cross-tab report of login times for hours logged into a system. In the cross-tab if i use the time, I can't sum. So i have the time converted to seconds to allow for a sum and totals. Now I need to change the display of the field to time. When I go to my Format Field of the field in seconds, under Common tab i go to Display String. I put in the following formula: totext((/60)/60,0,"","") & ":" & totext(truncate(remainder(/60,60)),0) & ":" & totext(remainder({Secondin_Logins.T},60),0); My problem is it changes all to report the same time; no time is different. And the formula is wrong becuase when i do the hours if it is .501 or high it rounds up. Anyone have any solutions to convert seconds to Time?

Post Author: V361
CA Forum: Formula
Part of the probem may be the crosstab, any way, this example uses a group but should be generic enough to give you some ideas.
whileprintingrecords;
StringVar Hours1;
StringVar Minutes1;
StringVar Seconds1;
NumberVar time2;
time2:= 0;
if Sum ({Work Time}, ) = 0 then 0 else
time2:= Sum ({Work Time}, );
If time2 <= 0 Then
"00:00:00"
Else
( Hours1:=ToText(Truncate(time2/3600),0);
Minutes1:=ToText(Truncate(Remainder(time2,3600)/60),0);
Seconds1:=ToText(Remainder(Remainder(time2,3600),60),0);
//Display the time formated.
(if length(Hours1) < 2 then '0') + Hours1 + ":" +
["0",""][length(Minutes1)] + Minutes1 + ":" +
["0",""][length(Seconds1)] + Seconds1);

My livecycle designer es4 form needs password protection for parts of the form

I have a form created in livecycle designer es4 that will be used by Adobe Reader users in three stages. The first stage is setting up choices on the form, saving them and passwordprotecting this Save. The form will be used three more times, each time saved as a new file.
How do I password protect each saved version from a command button?

Greetings,
You have a couple of options depending on whether you need to display the number when the form is created, or saved.
You will need a 'Back-end' data store - most likely a database with a table that at a minimum keeps track of the last used number.
If you are saving the data from the form into a database, you could return the number to the user after saving the data ( and generating the associated number )
If you are wanting to display the number when the form is first opened, you will need to set up an action profile that fires when the form opens to call the back-end and get the next number.
There is no guarantee that the user will save this form, so you may end up with gaps in your sequence if you are assigning numbers other than when saving.
The forum has many posts on loading data into forms before presentation, and also some on using web services to push and pull data from forms.
Hope this helps
Mark

Converting PDF to RAW for display in the portal

Hi all,
We have an application that took a pdf and converted it into a raw datastring to pass to the portal for display purposes.
We have migrated this function to a unicode system and are now struggling to get this to work.
Code in non-unicode system
CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize   = e_filesize
    TABLES
      otf            = lt_otf
      doctab_archive = lt_doctab_archive
      lines          = lt_pdf.
LOOP AT lt_pdf INTO wa_pdf.
    CLEAR et_pdf.
    MOVE wa_pdf TO et_raw.
    APPEND et_raw.
ENDLOOP.
Now in the unicode system.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
    IMPORTING
      bin_filesize   = e_filesize
    TABLES
      otf            = lt_otf
      doctab_archive = lt_doctab_archive
      lines          = lt_pdf.
    FIELD-SYMBOLS: <x_wrk_line> TYPE rmps_raw134,
                   <x_struc> TYPE xstring.
    DATA: buffer1 TYPE xstring,
          conv TYPE REF TO cl_abap_conv_out_ce.
Convert PDF to RAW Type
LOOP AT lt_pdf INTO ls_pdf.
    CLEAR et_raw.
    MOVE ls_pdf TO lv_pdf_line.
    ASSIGN buffer1 TO <x_struc> CASTING.
    ASSIGN et_raw-rawline TO <x_wrk_line> CASTING.
    conv = cl_abap_conv_out_ce=>create(
           encoding = 'UTF-8'
    conv->convert( EXPORTING data = lv_pdf_line
                   IMPORTING buffer = buffer1 ).
    <x_wrk_line> = <x_struc>.
    APPEND et_raw.
ENDLOOP.
If we simply download the pdf after we have tun the 'CONVERT_OTF_2_PDF' Fm the pdf created is fine. However when we view the output in the portal of the pdf (as streamed in the raw format) we just get chinese looking (they may well not be any language) characters in the pdf.
With a non-unicode R/3 system the pdf was displayed without any issues in the portal.
Any help appreciated.
Thanks,
Paul

Hi, could you kindly share the complete set of this conversion? i also need similar requirement.
thx so much.
regards,
Rudy.

What is the ideal size and resolution of a photo for display on the iPad?

I'm finding no info on the size of a photo for the best possible display on the iPad. The screen is obviously much larger than iPod Touch or iPhone; photos sized for them are fuzzy on the iPad. Ideally, a photo should be sized for the exact number of pixels on the iPad screen. Can anyone help me here? Thanks!

This is done automatically via the iTunes sync/transfer process - photos are optimized for viewing on the iPad, and there is not an option to change the default optimization settings.

What is the Tcode for displaying on the FI application?

Hi Sir/Madam,
I wanted to know how can we display only the "Accounting" application area in the SAP Easy Access screen, by entering which TCode?
Thanks in advance.
Regards
Satya

Hi,
Check BF11.
Regards

Can I choose which season artwork is used for display over the whole TV show?

I have a TV show with multiple seasons and multiple album covers, but iTunes chooses one to display over the whole show list that I don't like. Is there some way to choose which season cover is displayed over my whole show, you know, WITHOUT changing all the album artworks of all the episodes?

LaunchPad-Control was very useful to do exactly what you want on OS X Lion the developer has stated that there are problems when running on Mountain Lion and will not provide any support.
Your only option now is to create folders with related applications. Click on an application in Launchpad then drop it onto another thus creating a folder then rename the folder to something meaningful.

Adobe forms - No scroll bar for Display only fields

I am using adobe forms for SAP Enterprise Portal. i am using these in Worklfows. In the form there is a text field with no size limit and Allows Multiple Lines. Any amount of text is allowed to be entered. when the form is viewed by the next person, the script in the form make the field as read only. This is as expected.
Problem: If there are multiple lines the scroll bar does not appear for the field. Entire content is not visible. Printout of the form prints the entire text from the field. In edit mode the scroll bar is displayed!!
Adobe Reader version - 7.0.9
OS - XP SP2

Hi Sumant,
I am facing same issue. Any solution ?
Thanks & Regards,
Tushar Trivedi.

Interactive form in a view for displaying pdf

Hi
I am getting this error when deploy and run an application with an interactive form in a view. I need to get the pdf in the interactive form. can anyone help me.
com.sap.tc.webdynpro.services.sal.core.DispatcherException: Wrong Web Dynpro URL: "../WebDynpro/Servlet/<deployableObject>/<application>/xx?..". xx is not allowed without exchange key. Retrieved URI path: /local/Case/Employee/@acf_empty.

<b>Hi
Please Check This for Adobe Requirements in Web Dynpro Applications
To be able to use PDF forms in Web Dynproapplications:
1.SAPNetWeaverDeveloper Studio(minimum SPS 11) is installed
2.Adobe LiveCycleDesigner7.0 is installed
3.Adobe Reader7.0.x is installed
4.SAP NetWeaverWeb AS Javacompatible with the DevStudiois installed
5.The Adobe Document Servicesare deployed and configured on the SAP J2EE Engine.
6.The Active Component Framework(ACF) of the Interactive Forms integration is installed. (not mandatory)
7.Internet Explorer(version 6)
Check this links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2b6db1c4-0801-0010-faa5-ff4b4df55b45
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/63f09fc2-0401-0010-1482-dbf9891e7613
/thread/104121 [original link is broken]
Regards
Chandran</b>

Master Detail Form - Update Statement for Column in the Detail Section

Hello,
I've posted a demo application to apex.oracle.com
Application# 49298
Application Name: Street_Inventory
Basically, on page 3 I have a Master Detail Form. In the Detail section, I want the value of On_hand to save to table ITEMS. Here's my code below.
SOURCE
select
"CONSUME_DETAIL"."CONSUME_DETAIL_ID",
"CONSUME_DETAIL"."CONSUME_HEADER_ID",
"CONSUME_DETAIL"."ITEM_ID",
"CONSUME_DETAIL"."CONSUMED_QUANTITY",
("ITEMS"."ON_HAND" - "CONSUME_DETAIL"."CONSUMED_QUANTITY") as "ON_HAND"
from "CONSUME_DETAIL",
"ITEMS"
where "CONSUME_HEADER_ID" = :P3_CONSUME_HEADER_ID
and "CONSUME_DETAIL"."ITEM_ID"="ITEMS"."ITEM_ID"
UPDATE INVENTORY PROCESS
UPDATE ITEMS
SET ON_HAND = :P3_ON_HAND - :P3_CONSUMED_QUANTITY
WHERE ITEM_ID = (select ITEM_ID
from CONSUME_DETAIL
where CONSUME_DETAIL_ID = :P3_CONSUME_DETAIL_ID);
My code isn't working. What am I doing wrong?

WReed,
The first thing I see "off the bat" is that you don't have items named P3_ON_HAND and P3_CONSUMED_QUANTITY which are referenced in your code. Although it's possible to do what you want with just SQL, I updated your code with a little PL/SQL to make it easier to understand...
As you'll see the problem now is that the design/db model is not quite right as your getting a too many rows error.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Regarding hr forms of time statement for displaying in the ESS

Similar Messages

Maybe you are looking for