Regarding HTTPs receiver

Hi,
My scenario is PROXY->XI->AS2
At receiver side I need to use HTTPS for secure connection.
I got two field called:--
1) server Certificate(keystore)
2) private key for client authenticationI have got certificate name( let say "xyz-root"). It is installed in PI server at ABAP stack.
My Q. is
What value I need to put in those two field?
Can we put private key in Communication channel?
Thanks
Jai

hi prateek,
Like I have got one certificate. while clicking in details tab i can see issuer:--xxx.sd.com
and the name of certificate is (let's say hh-ff-g).
what i need to put TRUSTED/AS2_Partner/name of certificate file
or
TRUSTED/AS2_Partner/issuer
Is this
+TRUSTED/AS2_Partner/test-cert+
TRUSTED/AS2_Partner will be always used.
I m new to this certificate installation, So my Q can be stupid. Please ignore..
Thanks

Similar Messages

Regarding Http Receiver Adapter Details.

Hi Everyone.
When do we use http Receiver Adapter?
I want to configure File to HTTP Scenario.
For Receiver Adapter, What should i Specify Addressing Type .If I select the URL Address
What I need to give values for Target Host, Service Number, Path and Similarlly If I select Addressing Type as HTTP Destination, What I need to give value for HTTP Destination.
Regards,
Varun

Hi,
check this blog
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
CSV File Lookup With Http Request and Response in XI
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Regards
vasu

HTTP receiver problem

hi all,
though some of u replied to my previous post regarding http receiver, i'm unable to find a solution for it....so if possible please send me a few snapshots of how a HTTP receiver is configured and a sample jsp program for accesing the payload sent by xi......
the scenario is http>xi->http..the thing is
1)xi gets the input from a web page..this is successfully done.
2)xi does the mapping...this is also successfully done..
3)xi send the mapping result to the http adapter.....problem with configuration i think...i want xi to send the payload to http://sysname:port/virtual-dir/x.jsp .... when it is the case i get some no-mapping error......and i would like to know in what parameter name the payload is fixed in the query string to that url so that i could get it in jsp page a request.getParameter("parametername")......
please do help me in it..i'm struck with it for a long time........thanks in advance...

Hi SPS,
Check this link
/message/654739#654739 [original link is broken]
code attached here
sample html code
<html>
<script type="text/javascript">;

</script>
<head></head>
<body>
<h3>Client Http Adapter </h3>
<form name="MessageParameters">
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="100%">
<h4>Header</h4>
<tbody>
<tr>
<td width="10%"><label>ServerHost</label> </td>
<td width="22%">
<input type="text" id="host" name="Server"
value="sapcoe01" size="20" /> </td>
<td width="10%"><label>ServerPort</label> </td>
<td width="22%"><input type="text" id="port" name="Port" value="8000" size="10" /> </td>
</tr>
<tr>
<td width="10%">Client</td>
<td width="22%">
<input type="text" id="client" name="Client"
value="020" size="3" /></td>
<td width="10%"> </td>
<td width="22%"> </td>
</tr>
<tr>
<td width="10%"><label>SenderService</label> </td>
<td width="22%"><input type="text" id="senderService"
name="SenderService" value="TravelAgencyCS" size="40" /> </td>
<td width="10%">QOS</td>
<td width="22%"><input type="text" id="qos" name="Qos" value="EO" size="4" /> </td>
</tr>
<tr>
<td width="10%"><label>SenderInterface</label> </td>
<td width="22%"><input type="text" id="senderInterface"
name="SenderInterface" value="BookingOrdersOut" size="40" /> </td>
<td width="10%"><label>SenderNamespace</label> </td>
<td width="22%">
<input type="text" id="senderNamespace"
name="SenderNamespace" value="http://sap.com/xi/rkt/CaseStudy/group99"
size="40" /></td>
</tr>
</tbody>
</table>
 
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="100%">
<h4>Optional Parameters</h4>
<tbody>
<tr>
<td width="10%">SenderParty</td>
<td width="22%"><input type="text" id="senderParty" name="SenderParty"
size="40" /> </td>
</tr>
<tr>
<td width="10%">SenderAgency</td>
<td width="22%"><input type="text" id="senderAgency" name="SenderAgency"
size="40" /> </td>
<td width="10%">SenderScheme</td>
<td width="22%"><input type="text" id="senderScheme" name="SenderScheme"
size="40" /> </td>
</tr>
</tbody>
</table>
 
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="100%">
<h4>Payload</h4>
<tbody>
<tr>
<fieldset style="padding: 2">
<td width="50%"><input type="radio" name="Source" value="Textarea" checked="checked" />Type in XML</td>
<td width="50%"><input type="radio" name="Source" value="File" />Upload File</td>
</fieldset>
</tr>
<tr>
<td width="50%"><textarea name="xmlData" rows="10" cols="60"><a>test</a></textarea></td>
<td width="50%"><input type="file" name="xmlFile" size="40" /> </td>
</tr>
</tbody>
</table>
<p>
<input type="button" value="Send" id="button1" name="button1" LANGUAGE="javascript" onclick="button1_onclick()" />
</p>
<hr />
<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" bordercolor="#111111" width="100%">
<h4>Result</h4>
<tbody>
<tr>
<td width="50%"><textarea name="response" rows="5" cols="60"></textarea></td>
</tr>
</tbody>
</table>
</form>
</body>
</html>
the code in that uses an Active X object, but if you can align your JSP code to receive the response in similar way, then probably your prob is solved,
Best of luck
Regards
Vishnu

Regarding Business System For HTTP Receiver Adapter.

Hi Everyone,
      Which Type of Business System do I need to select For defining HTTP Receiver Adapter.
I am doing File to Http Scenario. What will be my output look like, If i am Sending file as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
   <Message>
      <Id>123456</Id>
      <Head>
         <Id>123456</Id>
         <Filename>sample.xml</Filename>
      </Head>
      <Body>hello</Body>
   </Message>
</ns0:MT_Source_FILE>
Regards,
Varun

Varun,
You can use third party Business system or else you can use Business sevice also.
Take a look at these blogs,
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
Yuga

Assign a dynamic value to a field in HTTP receiver header without IR part

hi experts,
I am doing a scenario in which i am to add a header field in http receiver, whose value will vary for each transaction. and the value will be same as sender file name.
But this all I am to do without doing Repository part.(i.e. No message interface and no mapping)
Is it possible? If yes help me out.
"Useful effort will be appreciated"....
Thanks

Hi Jaideep,
Hpoe the below link will help you.
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Regards,
Leela

HTTP Receiver Adapter - delete ?xml version="1.0" encoding="UTF-8"?

Hi,
Is it possible to delete the part below when sending an HTTP request through HTTP receiver adapter without any java/abap/xslt mapping?
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Thanks
Arman

Hi,
<?xml version="1.0" encoding="UTF-8"?>
Specifies that the given message is xml
<ns0:MT_SELL xmlns:ns0="http://test.com/Sell">
Specifies its a MessageType of the payload, without this that message is not identifies and is not processed. Its manditory to have these. Other wise error will raise.
Regards,
Prasanna

HTTP Receiver interface returns with error code 110

Hi All,
We are posting the document from XI to a external server as HTTPS request.
We are able to sucessfully post the request to external server using HTTP destination as address type but not able to post sucessfully with URL as address type.
Here goes the details -
We are able to post the HTTPS request successfully on the external server using the HTTP destination as address type in HTTP receiver adapter setup.
When we setup address type as HTTP destination , we need to provide the following details -
IN SM59 , Connection type G
Target Host : host name ( with out "https://" as prefix)
Service No : 443
Path prefix : query string
SSL : Active
Certificate : Select the certifacte from the client certificate list.
We can post the request to external server using URL as address type in HTTP receiver adapter setup.
When we setup address type as URL , we need to provide the following details -
Address type : URL Address
Target Host : host name ( with out "https://" as prefix)
Service Number : 443 ( HTTPS port setup on XI)
Path : query string.
When we post the same request as we did with HTTP destination as Address type , we are getting a HTTP response code as failure HTTP response code 110
Please find the details about the return code -
If a cache returns a stale response, either because of a max-stale directive on a request, or because the cache is configured to override the expiration time of a response, the cache MUST attach a Warning header to the stale response, using Warning 110 (Response is stale).
110 Response is stale
MUST be included whenever the returned response is stale.
Please find the error message from SXMB_MONI
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client code 110 reason</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please let me know if some one has faced this issue.
Regards,
Reddy
Edited by: Nanda kishore Reddy Narapu Reddy on Mar 11, 2008 12:35 PM

Hi All,
Is some one can confirm that - We can use HTTPS with Address type as URL address in HTTP receiver adapter setup.
I can confirm that using HTTP destination as Address type in HTTP receiver adapter setup we can attain HTTPS communication with external server.
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can guide me what are the steps need to be done.
Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

HTTP Receiver Adapter

Hi,
I am working on a scenario, where I am posting xml message on https url, for which I am using HTTP receiver adapter.
I have created RFC destination of type 'G' in sm59 to make an https call, where I have provided following details:
In Technical Settings:
Target Host - <Hostname>
Service No. - 443
Path Prefix - <url path>
Logon Security:
SSL - Active
SSL Client Certificate - Default SSL Client (Standard)
UserName - <Username>
Password - <Password>
I have used this RFC destination in 'HTTP Destination' of HTTP receiver adapter.
When I test this interface, I am getting this error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP client. Code 110 reason</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Can you please help me resolve this issue. Please let me know, if I am following the right steps.
Thanks in advance
Regards,
Amit

Hi -
Since you're using the http destination option in the channel, you just specify the user/pwd in the destination.
Regarding the issue, first, for the Logon/Security option in the destination, unless you'll be using a client certificate to authenticate, you should choose option ANONYM SSL Client (Anonymous) - you still provide the user/pwd in the Logon section. Make sure you have imported the root cert of the CA verifying the server's identity into the client certificate list within STRUST (node SSL Client (Anonymous)).
Also, for some hints on the issue, look at the ICM trace - tcode SMICM->Goto->Trace File... you may need to increase the trace level - SMICM->Goto->Trace Level... After resolving the issue, make sure to set the trace level back to default.
Regards,
Jin

HTTP RECEIVER QUERY

hello everyone,
I have to develop a synchronous scenario, SOAP Sender to HTTP Receiver.
Soap sender will be passing suppose 2 fields Name and Employeeid and the Http receiver will be replying back the
response with entire employee details (name, id, address, dateofbirth, etc).
Http receiver has to be accessed via a URL like
https://abc.com/test/servlet/ServletInterface?command=getdetails&emp_name=<Name>&emp_id=<Employeeid>
This is an https request, henc an RFC destination needs to be configured in XI and SSL has to be activated but how will i add the parameters Name and Employeeid to the URL mentioned in the RFC destination.
i went through many blogs on SDN, but i could not figure out how to append the URL mentioned in the Http Destination. Is it possible to do dynamic configuration with SSL enabled.
i tried passing URL https://abc.com/test/servlet/ServletInterface?command=getdetails in the HttpDestination and also configured a mapping for dynamic configuration but with no success.
please let me know if i am on the right track. if not please suggest.
thanks in advance.
Edited by: praveen kalwa on Feb 22, 2008 1:33 PM

Hi,
XI supports only PUT method of http request. While adding parameters to the addr string is considered as a GET method.
Refer following blog in this regard.
/people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
-Kavita

Http receiver channel works fine. SM59 gives an error

Hi,
I've set up HTTP receiver communication channel with the following details:
addressing type       : URL address
target host                : cl-test.zzzz.nl
service number        : 20212
path                          : /zz/servlet/runHXML?site=sap&thread=something
authentication data   : use logon for NON sap system.
When i send a message it arrives at the receiver side, and i get "succesfully processed" in the sxmb_moni.
I want to use addressing type HTTP destination instead of URL address so i created an HTTP destination (type G) in SM59 with the same details.
But when i perform the connection test i get an Internal Server Error
(~response_line HTTP/1.1 500 Internal Server Error)
I tried replacing the target hostname with the ip-address, but still the same response.
What can be wrong?
Kr
Robert

Hello Robert,
When you try to test the HTTP destination in SM59, XI send a HTTP Post to the target system but with no payload.
In your case I assume that the Target System cannot process this message and hence triggers a Internal server Error - HTTP 500.
Can you use this HTTP destination and try to test the working scenario end to end. This should work.
Regards,
Bhavesh

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
   HttpVersion: HTTP/1.1
   Authorization: Digest username=myusername,
                         realm=[email protected],
                         nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
                         uri=/dir/index.html,
                         qop=auth,
                         nc=00000001,
                         cnonce=0a4f113b,
                         response=6629fae49393a05397450978507c4ef1,
                         opaque=5ccc069c403ebaf9f0171e9517f40e41
                         Contentlength: 12345
                         Contenttype: text/html
HTTP Body
   TRANSPORT_PROTOCOL=OXTA
   TRANSPORT_PROTOCOL_VERSION=1.0
   REQUEST_TYPE=SEND
   MESSAGE_ID=A1234567890ZZ0987654321
   MESSAGE_TYPE=XML
   MESSAGE_STANDARD=OAG
   TRANSACTION_TYPE=PO
   TRANSACTION_SUBTYPE=PROCESS
   DOCUMENT_NUMBER=12345
   PARTYID=9999
   PARTY_SITE_ID=8888
   PROTOCOL_TYPE=HTTPSOXTA
   PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
   transportAgentServer
   USERNAME=myusername
   PASSWORD=myloginpassword
   ATTRIBUTE1=
   ATTRIBUTE2=
   ATTRIBUTE3=
   ATTRIBUTE4=
   ATTRIBUTE5=
   PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

Adapter specific properties (http receiver adapter)

Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
Marc

Hello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", <b>XXXXX</b>);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc

Regarding HTTPs receiver

Similar Messages

Maybe you are looking for