Regarding Hyperion 11.1.1.1.0 licensing  and architecture

Hi,
I am planning to install Hyperion 11.1.1.1.0 version.I want to know about the architecture(Server and client) details and its installtion . Do we need separate license for client and server components?Help on this.

Hi,
There is no need of license to install Hyperion 11.1.1.1.0. U can down load it from http://edelivery.oracle.com/. There u can select whatever the components u want to download.
Prasanna

Similar Messages

  • Licensing and costs for Creative Cloud for teams on small company

    Hello,
    I have a few questions regarding the teams solution.  They  are:
    1- Is the license by user or by computer?
    2- What is the actual cost of Creative Cloud for Teams ( small companies with less than 100 employees).  In some sections it states monthly cost of 69,99€ while others state 49,99€.
    3- Assuming the monthly cost of 69,99€ does this cost covers all products listed ( ilustrator, photoshop, dreamweaver, premiere,...) for a single user or  is that the cost per user and per product?
    4- How long do I have to keep the contract? Only 1 year?  If I want to cancel when should I communicate? or I just need to set on the console 0 users?
    5 - Assuming I have only one creative user can the admin console be installed in a different machine (e.g. network admin) without the need of an extra license? 
    6 - If I acquire 1 license and decide to drop it 1 year and 1 month after will I pay 1 year plus that month or do I need to pay the 2 years?
    Thanks for your feedback,
    Regards,
    Pedro

    Hello,
    I have a few questions regarding the teams solution.  They  are:
    1- Is the license by user or by computer?
    2- What is the actual cost of Creative Cloud for Teams ( small companies with less than 100 employees).  In some sections it states monthly cost of 69,99€ while others state 49,99€.
    3- Assuming the monthly cost of 69,99€ does this cost covers all products listed ( ilustrator, photoshop, dreamweaver, premiere,...) for a single user or  is that the cost per user and per product?
    4- How long do I have to keep the contract? Only 1 year?  If I want to cancel when should I communicate? or I just need to set on the console 0 users?
    5 - Assuming I have only one creative user can the admin console be installed in a different machine (e.g. network admin) without the need of an extra license? 
    6 - If I acquire 1 license and decide to drop it 1 year and 1 month after will I pay 1 year plus that month or do I need to pay the 2 years?
    Thanks for your feedback,
    Regards,
    Pedro

  • Sales order -Tax Exemption License and Excise duty Tabs In  IDEAS

    Dear Team,
    Kindly anyone explian me wat are the importance of the Tax Exemption License and Excise duty Tabs In  sales order - IDEAS, ECC 6.0.
    Please explain me how to maintain currently it is in greyed mode how to maintain and what is the importance of the said tabs.
    Regards
    abhi

    No answers

  • IVL License and validity date

    Hello Experts,
    How do you apply an IVL license to a sales order that was placed before the validity date of the license? 
    The business scenario that I have is a sales order was placed in September, and it required a license.   We applied for the license and recieved it recently and the validatity date is December 2010 thru December 2011.   The license was maintained in the system as such, but the license will not apply to the order since it was placed prior to the stated validity of the license because the document reference date that is being used is the date the order was placed.    Is there a way to account for this without having the sales rep replace the order so the document reference date is inside the validity date of the license recieved from the government?
    Regards,
    annm

    hi
    In your GTS system go to Transaction- /n/SAPSLL/LCD_CHANGE and delete the existing license from the existing order.
    Then go to transaction- /n/SAPSLL/CUHD_MR_EXP and check boxes of "Display Log" and Save Log" and execute it with order number. New license will be assigned to it but make sure you have maintained the correct license determination strategy for it.
    Thanks
    DG

  • Questions re: GPIB-ENET, LabView 5 and 7, license and Win XP

    We have a full development version of LabView 5.0 on a Win 98 SE machine, and just acquired a GPIB-ENET box that came with Solaris drivers. I loaded the GPIB and VISA software on LabView 5.0 and tried to connect to test the setup to no avail. It appears that all of the drivers are present. I believe that my problem is that I can�t get the IPAssign network driver bound to the 3Com ethernet card. When I load it in network properties, it doesn�t offer any hardware to bind to it. If I run IPAssign anyway, it claims the only networking hardware available is dialup, and sits forever (probably waiting to connect to a dialup line).
    The ultimate plan is to upgrade to LabView 7, and install it with the GPIB-EN
    ET box on a Win XP system. I have a demo version of 6.1, so I loaded that on the XP machine and tried again. LabView 6.1 appears to be missing drivers for GPIB-ENET, and looking through the knowledge base tells me a driver bug leaves Win XP incapable of assigning an IP address to GPIB-ENET anyway.
    My questions are:
    1. Should it be possible to get LabView 5.0 with 98SE talking to the older GPIB-ENET box, at least to set the IP address? Is this failing because I need to download the license (p/n 778258-02)?
    2. If I order LabView 7 and install it on Win XP, will I still need to download the license to run it, or is that included in version 7?
    3. Once I get LabView 7 and the driver and the license (if necessary) will I be able to assign the IP address with this setup?
    4. If the answer to #1 is �yes, with a license� and to #3 is �no�, then can I download the license, use it to assign an IP address on LabView 5 and transfer it to LabView 7/ Win XP when I get it to use the GPIB-EN
    ET box?
    Thanks.

    Hello,
    Which version of the GPIB drivers are you using? We recommend using NI-488.2 v2.0 for your GPIB-ENET device (for Windows XP and Windows 98).
    1. Should it be possible to get LabView 5.0 with 98SE talking to the older GPIB-ENET box, at least to set the IP address? Is this failing because I need to download the license (p/n 778258-02)?
    A: If you have version 2.0 of the drivers, you should be able to assign the IP okay. Do you see a pattern in the LEDs flashing? Check the READY LED and see if you see a pattern, as this indicates an error code. The following formula can be used to find the error code:
    error code= (long flashes-1)(short flashes-1)example: 3 long flashes, and 9 short flashes = (3-1)(9-1) = 28
    If the READY LED does not stop flashing, it indicates that the GPIB-ENET does not have a valid IP address assigned to it. According to this KB:
    The problem is the Ethernet address. The field for the Ethernet address in the IPAssign Utility is meant for the last four digits of the Ethernet address on your GPIB-ENET (the first part of the address is the same for all GPIB-ENETs, so it is pre-filled for you). If you run the IPAssign Utility again and fill in the last four digits of your GPIB-ENET's Ethernet address (in the format: xx:xx), then you should be able to assign it an IP address successfully.
    More details: The Receive LED flashes because the Ethernet header for the packet is correct and the GPIB-ENET recognizes that; However, the header was actually duplicated when you entered the Ethernet address in the IPAssign Utility, so it did not match the exact Ethernet address of that particular GPIB-ENET. The only numbers that need to be entered into the Ethernet address field in the IPAssign Utility are the last 4 numbers in the format: xx:xx.
    Note: The user must decide what the IP address is going to be. Your IT department could probably help.The Ethernet Address however, is statically programmed into each ENET. It's usually labeled at the bottom of the unit.
    Also, refer to this KB regarding some IP issues we've had with some of the older GPIB-ENET devices.
    2. If I order LabView 7 and install it on Win XP, will I still need to download the license to run it, or is that included in version 7?
    A: You should uninstall and reinstall NI-488.2 v2.0. If you already have this driver, you will not need to re-license it. The driver is not included with LabVIEW 7.0 by default.
    3. Once I get LabView 7 and the driver and the license (if necessary) will I be able to assign the IP address with this setup?
    A: You should be able to assign the IP fine. Look at the response for first question above to make sure you are assigning the IP correctly.
    Anu Saha
    Academic Product Marketing Engineer
    National Instruments

  • Aperture forgets it license and asks me for the serial number over and over again

    Hi,
    This is getting ridiculous to the point where I'm thinking of just ditching Aperture.  It's continually forgetting is license and asking me for the serial number over and over again.  I have the original serial number and an upgrade number when I upgraded to v3, but right now, it's not  accepting either of them. What's going on and how do I fix it permanently?
    Thanks,
    Rob

    Rob, have you upgraded to Aperture 3.4.3? This is supposed to have fixed the serial number problem:
    http://support.apple.com/kb/DL1610
    About Aperture 3.4.3
    Addresses an issue that could cause a licensed copy of Aperture to prompt for a serial number with each launch
    Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise can it not be stored.
    Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
    When did this start? Have you migrated your system from from another mac? Then you still may have an older ProAppSystemID file  or Aperture cannot write to the System Library.
    To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
    Quit Aperture.
    Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
    Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
    Reenter your serial number, hopefully for the last time.
    Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
    Use the Finder's "Go" menu
         Go > Got to folder    and  enter /tmp into the textfield. If you see the file there, move it to its proper location.
    In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
    Regards
    Léonie

  • Database Lite License and App Tutorial

    Hello,
    I'm looking for information regarding oracle database lite licensing and if any one could provide me with demo/tutorial on an application built using oracle jdev with ADF for mobile that uses oracle lite.
    Currently I have developed a demo mobile browser application (using oracle ADF) that does not use oracle lite and works only in connected mode. Any documentation on how to go about with oracle lite and work on offline mode/ synchronization would help me.
    I have a fair idea on licenses, Please correct me if I'm wrong or require any other,
    Oracle Database Enterprise or Standard Edition,
    Oracle Mobile Server,
    Oracle Weblogic Server,
    ADF Runtime licenses
    Greatly appreciate your input.
    Thanks and Regards

    Hi,
    Related to Oracle Lite you need to license:
    - the Oracle Lite Mobile Server
    - the Oracle Lite client (for each device)
    If you want to have an aproach check any online store of Oracle, but anyway you will have to contact an Oracle Partner for licensing, discounts, etc... if your partner know about mobile ;-)
    https://shop.oracle.com/pls/ostore/f?p=ostore:product:4500444252482991::NO:RP,3:P3_LPI:4509478177681805719950
    https://shop.oracle.com/pls/ostore/f?p=ostore:product:4500444252482991::NO:RP,3:P3_LPI:4509426259321805719944
    I hope it helps you
    Regards,
    T.

  • I bought a second license and I can't find the serial number, I have tried to contact adobe like 4 times and got no luck. Any help on where to find it? is it the same serial as the first copy we have?

    I bought a second license and I can't find the serial number, I have tried to contact adobe like 4 times and got no luck. Any help on where to find it? is it the same serial as the first copy we have?

    Hello,
    This order no is for subscription of Adobe Captivate 8. In order to install subscription you need not to enter any serial key .During the installation it will prompt you to enter your Adobe Id and it will validate your subscription after validating your Adobe Id from the server. I mean you have to sign in with your Adobe Id during the installation which you have used at the time of purchasing the subscription.
    So for installation and activation you dont need any serial key . Just sign in and it will automatically activate your subscription .
    For more information on subscription please click on the link below.
    http://www.adobe.com/in/products/captivate/faq.html#subscription
    Regards,
    Rajeev.

  • UCSS Reinstate licenses and migration to v10.

    Hi,
    I have a customer who has CUCM version 6.1. Their UCSS has lapsed quite some time ago. I'm looking to get this re-instated and upgrade them to CUCM v10 and move them across onto CUWL Standard.
    Would I therefore need to order a UCSS reinstatement license for each user, a migration license and 3 years of UCSS to accomplish this? I have found when I try this on CCW - it adds UCSS for the Migration licenses and the re-instatement licenses as well...
    The ordering guides are not that clear on it all.
    Regards
    Dave

    Hi Dave,
    I refered the ordering guide which says that Reinstatment is required if UCSS is not renewed within 30 days from the date of expiry.
    Secondly,the Part Code is L-REINST-UWL-PRO for Professional user  which when selected in CCW automatically adds UCSS for next three years for that particuler user.Part code is [ L-UCSS-UWL-PRO-3-1].
    regds,
    aman

  • Moving IRM Licensing and Web Management Servers

    We are in the process of moving out IRM Licensing and Web Management server (both on the same machine) to a new machine. We want to keep the same database which is on a different machine.
    I have done this before by creating a new database, installing the software into that database and then shutting down the server and modifying some files.
    I'm not sure where I found the procedure. It does not appear to be in the els-install.pdf document. Does anyone know of a document outlining this procedure?

    Hi,
    Have a look at KM note 451747.1 which details the steps for any IRM Server migration.
    Regards,
    Frank.

  • Activate the license and upgrade signature of AIS IPS on ASA

    Hi,
    I alreay have smartnet contract for my IPS. Now, I need to do auto upgrade my IPS signature
    While i was doing, it ask me to activate license key. How to get the license key for my IPS?
    Regards, CT

    You can grab your license here:
    http://cisco.com/go/license
    and install it with these instructions:
    http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/cli/cli_setup.html#wp1046739
    - Bob

  • SAP License and System Information

    Hi,
      How can i view the SAP License and System Information.
      Points guaranteed for useful answer.
    Regards,
    Raju

    Hi,
    Login to SAP system with any client and select the Menu Item System ---> status.
    You can see the Version info, License info, Support Pack levels, Database and OS details.
    Regards,
    Chanda.

  • I bought adobe CC education license, and adobe asks me for a serial number

    I bought adobe CC education license, and adobe asks me for a serial number@

    Signing out of one Creative Cloud application deactivates all Creative Cloud applications associated with your Adobe ID on that computer.
    Make sure that your computer is connected to the Internet.
    Start the application.
    Choose Help > Sign Out (Your Adobe ID).
    Click Sign Out.
    Alternately, you can sign out from all Creative Cloud applications on your machine using the Creative Cloud app for desktop.
    Open the Creative Cloud Desktop App.
    Choose the Settings icon.
    Choose Preferences.
    Choose Account.
    Choose Sign Out from Creative Cloud.
    Running into a problem? See Common Deactivation Issues.
    Refer to http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#de activate-problem
    Regards
    Rajshree

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

    I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank.  I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite.  Please help!

    Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

Maybe you are looking for