Regarding Inbound and outbound interfaces in ABAP HR
Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.
Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.
Similar Messages
-
How to do an inbound and outbound interfacing using UTL_FILE ?
dear members,
How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
regards
sandeepin/
file/
bad/
done/
out/
file/
bad/
done/
I would start by ftping / putting the file in in/file/ folder, once ftp has completed move it to complete/ folder and process the file. If errorrs are generated move the file over to bad folder. If completed successfully move over to done folder.
Having said that you would use UTL_FILE_DIR init parameter to set your directory.
ALTER SYSTEM SET UTL_FILE_DIR='directory1','directory2' scope=spfile;
Then you would use the regular utl_file packages to read / write to the files.
UTL_FILE.FOPEN and so on. -
How to do inbound and outbound interfacing using UTL_FILE?
dear members,
How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
regards
sandeepHi Sandeep,
I do not know if I got your question correct.
Here is my understanding of it, pls correct me if I am wrong:
You want to read from and write to the OS from inside the DB? Right?
There are differnt waysa to do so, depanding on your Oracle version:
1. you can use the initialization parameter UTL_FILE_DIR to specify a directory on OS where you can read from and write to through the package UTL_FILE.
2. You can use a directory object in the DB to manage read write access to the OS. This is also usable with the package UTL_FILE as location where to read from and write to.
=> CREATE DIRECTORY my_dir AS '/home/oracle/my_directory';
GRANT read , write ON DIRECTORY my_dir TO scott;
SELECT * FROM dba_directories;
You need CREATE ANY DIRECTORY system privilege for this.
You can use directory objects also for external tables.
With these you can read from flat files in teh directory on OS with a select statement as if it were a table inside the DB.
Does this go into the direction you were thinking of?
Hope it helps for the first.
Regards,
Lutz -
Why do we use inbound and outbound plugs in abap webdynpro?
hi all,
why do we use inbound and outbound plugs in abap webdynpro?
ThanksActually we have 2 types of plugs
1.View plugs
2.Window plugs/Interface Plugs
plugs are for navigating one view to the other and also you can pass the parameters along with the plugs.
Outbound plug is to navigate from one view to other view,also we can pass parameters along with the plug.
Inbound plug is like event handler/receiver of the outbound plug.
Using window plugs we can call other Web Dynpro applications.for more information check this link.
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/45/19bf8c16f25d7ae10000000a11466f/frameset.htm
Thanks
Suman -
When To Use Inbound and Outbound Interfaces?
I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..
And how to decide when to use a Inbound and Outbound Interface?Hi Barik,
<b>I use an Inbound message type when i am receiving some data and outbound message type when i push data out of the XI box??Is this correct..</b>
WRONG!!!
outbound message->XI->Inbound message...
(sender system)->XI->(reciever system)
remeber: when u r sending some data to XI u send it using outbound interface.
and when u r sending some data from Xi to other system u use inbound interface...
Hope ur doubt is clear!!
regards
BILL
Use a Good Subject Line, One Question Per Posting - Award Points -
Including Inbound and Outbound Interfaces to Business System
Hello
Iam new to SAP XI, but have expierence in webMethods EAI Tool.
Iam developing a sample interface to pick and put a file in SAPXI itself and for this have created the Interface(data type,mesg typ , mesg inetface , mappin and interface) in Repository.
Now to pick and put file what setting should have to do in Directory.
I have added a Business Service, but it is not listing the Component which was created by me from SLD (only standard component versions which came along with SAPXI are listed). Because of this the interface (inbound and outboound) which was created in my component is not listed.
Can any one help me with this.
Also can you suggest an devleopment doc to refer.
Thanks
VinodHi Vinod,
Check out this thread..
Inconsistence Adapter Framework
No entry for adapter engine in CPACache
Also check OSS Note : 764176 - Error in XI due to inconsistent SLD contents
This note provides a lot of information, but may not be enough. Carry out the following checks:
check that the CPACache works ok
check that sxi_cache works ok
check that sxi_cache->goto-->AE Cache shows an entry for the adapter engine
check the roles for the service users, especially xidiruser
Nilesh -
Unit test plan for inbound and outbound interfaces
I am trying to create a UNIT TEST PLAN for an interface. In this interface a flat file in IDOC format is picked up from the application server and processed using EDI_DATA_INCOMING for the relevant posting ( example : Sales order creation from a PO IDOC). IF the file is not in IDOC format then it is reformatted to the IDOC format manually.
In second scenario(outbound), after sales order creation or billing document creation, IDOC is created which is read and a custom flat file is created and sent to a middleware.
PLease suggest a unit test plan for these kind of scenarios or send a sample UTP if possible.
REgards
Nishant
PS: points will be awarded to helpful answers.Unfortunately this isn't possible, the esa has only one routing table. You'll have to add specific routes for your internal networks.
I usually avoid two-armed setups because of this and it gets even worse if you want to use virtual gateways (traffic gets sent via the internal interface with an IP from the external interface) -
To Monitor inbound and outbound messages for ECC 6.0 business system
Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh -
Monitoring of inbound and outbound messages for business system ECC 6.0
Hi Guys,
I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
XI server is on a different system.
I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
Thanks,
James.James,
Go to SXMB_MONI in your sending system.
Here you will find a message ID fro your Message.
Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
Likeiwse it can be traced in the target system as well.
The basic point, The messages will have same Message Id on your R3 and on XI.
Regards
Bhavesh -
Hi Every One,
I have a very small question.
How do we define INBOUND and OUTBOUND?
I got this doubt, when I read some material, sometimes the directions (INBOUND and OUTBOUND) are told as per application systems which participate in message exchange? Sometimes the directions are told as per the XI integratin server.
Which of the 2 methods stated above is correct?
I hope I am clear in what I wanted to convey.
Bye, tschüs, adeu
-Naveen.Hi NaveenKumar,
You use a message interface to describe a platform-independent or programming-language-independent interface, which you want to use to exchange messages between application components using SAP Exchange Infrastructure. Depending on the communication parameters defined for a message interface, it can either have the task of sending a request (outbound) or receiving a request (inbound).
An outbound interface sends a request message that is only used to make a communication party aware of data sent, without waiting for a response message. In the case of the latter, we also refer to publishing interfaces.
An inbound interface receives a request message that you reply to with a direct response message or whose data you can process in the system without a response.
I guess i have helped you solve your confusion.
Regards,
abhy -
How to add Total Quantity in Inbound and Outbound Delivery screen
Hi,
I want to add Total quantity field in Inbound and Outbound Delivery screens.
In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
in Change Layout--> Display, i didn't see any totals displayed.
Please help me on this?
Regards
BhuvanaHi
If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
Regards
Eduardo -
Sharing Handling Units between Inbound and Outbound Delveries?
Hello-
I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
2.) Purchase Order is sent to supplier.
3.) Shipping Label is generated in SAP and is assigned a Handling Unit. Label is sent to supplier.
4.) Supplier affixes this label to product and ships it to our warehouse.
5.) Goods Receipt is performed via Purchase Order (MIGO).
6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
We would like to do a few new things with this process.
A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it.
B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer.
Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery?
Is EWM Cross Docking the best way to accomplish this?
Are there other proven approaches?
Thanks for your time and help.
-Ronhi friend
Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the material
like FG material and tray
identification number controlling the handling unit numbers.
with regards
dinesh -
Need IDOC inbound and outbound programs
hi,
i am new to xi.
i want IDOCs , inbound and outbound / function module programs for PURCHASE ORDER
and GOODS RECEIPT.
ex: BD10 for material master (matmas01).
thanks and regards
v ijenderfor purchase order.
ORDERS / ORDERS04
ORDCHG / ORDERS04
ORDRSP / ORDERS04
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
and also check the below link
http://www.erpgenie.com/sapedi/message_types_masterdata.htm
regards
kummari -
SAP inbound and outbound delivey in single shipment document
Hi
We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO 2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
Please advice ow this can be achieved in SAP.
Best Regards
Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AMIt is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM -
Hi,
I am currently working on a project with the following requirements
1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
In otherwords, a inbound and outbound integration.
What I have tried so far and my results:
Scenario A
1. Enabled MTOM on SOA composite by attaching wsmtom policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
Scenario B
1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
2. Created an OSB business service and consumed the SOA composite application
3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
Result for Scenario A with file size less than 1 MB:
Flawless execution with sub-second response times
Result for Scenario A with file size of 8MB
First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
Result for Scenario B:
The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
Thanks
regards,
JohnnyI think this is due to the underlying mechanism of weblogic classloading..
You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
3- Get the oracle support admins at your client site to approve your request for support access.
4-Once they approve , you can access the support site and raise service requests.
Maybe you are looking for
-
One of my contacts had an iPhone and we iMessage fine. Now he switched to a samsung galaxy note III and I need to switch his contact from iMessage so he can receive my text. He still has an iPod so iMessage still works for that but will that be effec
-
How to check my ITS patch level.
Hi everyone, I need to check my ITS 6.20 patch level. Can someone tell me where can i find it? I am using a standalone ITS. Thanks Regards, Bryan
-
How to make sold to party to only order and ship to party to only delivered
Dear friends. How to make sold to party say 123456 to only order goods and should not be delivered goods if made ship to party in particular sales order.(customer 123456 is defined in customer master as both sold to party and ship to party).Similarl
-
Installing Clusterware 10.2.0.1 crashed the VM Host
Dear Experts.. I am facing a peculiar problem with my VM, while i try to install clusterware to it. My host machine is OEL4 Update 6 and created 2 virtual machines on that server. When i am trying to launch clusterware installation in one of my VM it
-
Since the latest ITunes update I cannot find all the CD songs I had converted into playlists. All I can find are the songs I bought on ITunes.