Regarding information about XI

HI Gurus,
at present one of my friend working in abap. At the same time he want to learn advanced topics. like XI or BIW.
Plz give me some good suggestions for his better future.
Thanks and Regards,
Vamshi

Hi Krishna
For ABAPER I would advised BI/W because BI/w is on abap stack mostly unlike XI is on Java Stack and many java/j2ee technology coding needed.On the other side BI/W is a very good emerging and import aspect of today business and it is also easier for ABAPER. More over one can also developed as a BI/W functional consutant at the same time. Because BW is the only side in which functional consultant needs more technical on the database modeling side.
reward points if it solve ur query
Message was edited by:
Ajay Kumar

Similar Messages

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Apc asset, information about payments and debts to a vendor

Dear sap colleages
I need to know these information about an ASSET:
Purchased orders,
Items from purchase orders,
which of these items i've received, i've paid (also date), i've not paid ( amount of debt related to asset)
payments in advanced (date),
wich of these payments have been cleared (clearing date) and wich not,
who is the vendor,
other expenses (such as delivery)
the amount of taxes,
invoices related and NOT RELATED TO purchase order
payments without invoice
Which transactions do i need to follow?
or
Which document flow?
or
Which tables? Wich keys?
or
Is there a standard report that can give me such information?
Any documentation and/or code will be appreciated.
I need to program a report to integrate all these information.
Thanks and Kind Regards

Hi:
Regarding payments to vendors,refer to FBL1N - Display/Change Line Items .
Select the company code and then open items radio button and today date.It will show what are payments still to be paid to the vendor.If you select cleared items, it will show the payments paid to the vendor.If you select all items radio button, it will show all paid and unpaid payments to the vendor.
Check this report whether it fills your requirment.
When the user posts the business transaction, he has to input all the details, otherwise some of the information may be missing.
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

Report with information about release documents in VKM1

Hello
I need to know if exists some report that gives me more information about release documents in transaction VKM1. What user releases some document? How many documents a credit account had been release or block in a year or between dates?
The transaction VKM2 just gives the release date of the document and not the user.
Where I can find more information?
Regards
Daniel Teles

Hi,
There is a field to know which account is the parent account, but you can't have others informations from the parent account except the name. In the new R16, you have others field called "Parent Account external unique ID" and "Parent Integration ID". What can I do with this field? Is it possible to display the parent account phone field in the report?
regards

Information about SAP Strategy Management (SAP SM)

Hello,
I want to know where I can find information about SAP Strategy Management (SAP SM). This is an application that was bought from PILOT.
Is it easy to customize like the SEM-CPM-BSC????
Is it an addon in the BW or ECC????
Is it all browser type application???
Thank you in advance...
Pablo Mortera.

Greetings Pablo,
Thanks for your interest in SAP Strategy Management (SSM). More information can be found on the BPX site for Corporate Performance Management.
https://www.sdn.sap.com/irj/sdn/bpx-cpm
On that page is a short demonstration of SSM. There are two other sections on that page -"Key Topics" and "Best Practices" have links for more information about Strategy Management.
On the SAP.com global site, there is also information about Strategy Management, including white papers.
http://www.sap.com/solutions/performancemanagement/strategy/index.epx
Please review all this information and let me know if you have additional questions about SAP Strategy Management.
Regards,
Bob

How to get information about cursor? I had only a reference on it.

Hello
How to get information about cursor, that I receive in my procedure as a reference. For example I need to know, a number of columns. I know nothing about this cursor, except the link on it.
Best Regards, Kostya Proskudin!

However, I would seriously reconsider what you are trying to achieve.
It looks like you are trying to write some ultimately generic cursor processor. i.e. pass any cursor and process it in some generic way.
Good design should include knowledge of what is expected to be passed and that knowledge can be put into the code.
Generic code is inherently difficult to maintain and debug and will never 100% deal with all possible situations e.g. even if you know the table being queried in the cursor you can't rely on the data dictionary to give you all the returned columns if some of the returned columns of the cursor are computed columns.
Be careful you aren't writing something that's going to cause problems later.

In CIF customer exit there is no information about the logical system

Dear All,
we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
In the CIF userexit used:
EXIT_SAPLCLOC_001
EXIT_SAPLCSRS_003
EXIT_SAPLPGS1_001
EXIT_SAPLCSTK_001
EXIT_SAPLMEAP_001
there is no information about the logical system (source, destination
etc.) The control parameters are not provided to the user exit.
I found a note 1060634 where the parameter have been added to
EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
Thank you !!
Best Regards , Barbara

Found the answer, to bad i cannot give points to myself :-P
In the ABAP i use the E_T_RANGE output structure.
That structure has several fields (sign, opt, low, high).
In my ABAP i stored the same value in the low and high field.
This should work fine for normal (flat) characteristic values.
However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
For details see: SAP NOTE: 912473
Regards

My country lacks of information about businesses and streets, to mention some. I want to provide my time for free to help populate this information and make Apple Maps useful in Costa Rica.

I love using Siri and your maps. But in Costa Rica, your maps lack of businesses data, and Siri is unable to provide any information about them, since this information is missing. I want to offer my time and work for free to help to populate this information in Costa Rica, starting by capital city San José. Google is much more advanced in the subjet, and I don´t see fair how complete this information is for United States and not the rest of the customers (not to make critic, just pinpointing a fact).
Who do I contact in order to make this offer?
Thank you so much in advance.
Frank

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to volunteering to help, you can report issues via the Report A Problem under the main menu in Maps:
Apple does not otherwise recruit users to assist with data correction, in part because they get the data from other companies. It's possible that there is no such compendium source of data for Costa Rica, at least one that Apple has yet been able to strike an agreement with.
Regards.

Does anyone have information about Fieldglass?

Hi Mills & Mining Community!
I am looking for use cases for Fieldglass in the Mining industry. I am building a PoV and will appreciate all the help I can get.
Specifically:
What are the main differentiators between Fieldglass and Ariba regarding procurement? What can Fieldglass do that Ariba can´t?
Is there available information about the average ROI in a Fieldglass deployment?
Which are the business benefits or business outcomes identified in Fieldglass customers? Cost savings? Decrease in permanent workforce? Benefits in compliance?
I understand that Fieldglass is pretty strong in being a Vendor Management System in Mining so if anyone has further information or knows whom should I reach to get it I will appreciate it very much.
Thanks in advance!

Hypermac has been making external batteries for the MacBook for several years now.
http://www.hypershop.com/
You can google user reviews.

Way to consolidate information about vendors

Hello,
I have two or more vendor master data , that have different vendor no (LIFNR) but they relate to same vendor.
Example: Vendor A Vendor B , different ID but relate to the same vendor.
It is happened usually in cases that the VAT.Reg no. is changed and than I need to open another record in the vendor master data for the same vendor.
I need to find way when using control reports (LIS, BW, ME2L,ME2M..) to vendor B (LIFNR) the system will show also information about vendor A.
I need, standard way to consolidate information for two different vendor master data that relate to the same vendor.
Best Regards
Hadidit

you create new vendor and continue your business with the new vendor, but want the old vendor as well in the reports.
I dont think that there is anything available in standard SAP that you can automatically get both vendors into a e.g. ME2L report when you enter one vendor number in the selection.
I cannot imagine thatyou can run MR2M reports based on partner functions .
in vendor master control view is field called Group key that can be used to link old and new vendor number
f1 help says:
If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are possible.
But I have not seen this field in selection of ME2L.

I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

Hello,
We plan to install DFS-R in our organization.
I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
Thank you for any info.

Hi,
You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
Understanding DFS Replication "limits"
http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
Common DFSR Configuration Mistakes and Oversights
http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I need information about reports

hi gurus,
i need information about Trending reports and Management reports. Can any body provide me the scenario regarding this issues:

Hi
Trend reports are the reports which show a certain trend all over the years
Say, Sales revenue for the year compared to all the previous years...This show what is the trend in the last few years
Management reports high level reports with summarized data which helps in decision making. Say, Vendor performance report...this report shows list of default vendors by ranking them and management can decide to continue or not to continue with certain vendors
Regards
N Ganesh

I need information about oops concept programming in abap

Hi ,
I need information about oops concept programming in abap
Thanks,
Asha

Of course, the best place to start is help.sap.com.
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
There are a couple good books out there as well. You can get them at www.amazon.com
Regards,
Rich Heilman

Extracting informations about rectangles, lines, fields etc from PDF

I'm looking for a way, to extract rectangles, lines, fields etc from a PDF, for example think of a blue rectangle which is drawn in a Word document, which is later exported to pdf. I need informations about the position of the rectangle, the color, the size, if it is filled or not, etc. Is there something like an API or an SDK which can help me? I searched for quite a time (so please, no RTFM-answers), but the only references I found where about producing PDF or extracting text, images or graphics (oh, just at the moment, I had the idea, that lines and rectangles could be coded as vector-graphics in PDF, could that be possible?).
I'm thankful for all answers and ideas (even if you just post links with informations),
kind regards,
Pivo

Yes, lines and rects are coded as vector graphics (or specifically path drawing instructions) in a PDF.
Adobe offers an SDK around Adobe Acrobat which would enable you to get this information. If you need a standalone solution, we also offer our full PDFLibrary.

Information about table spaces.

Hi!
I have a requirement to create a Bex by which I can display the list of table spaces available and status of those table spaces like memory free, Used. Though we can get this information from DB02 I need to generate a report and broadcast that to users.
Can anyone help me in telling me the table name where you can get the list of table spaces and infomation or any function module which lists the table spaces name and status of them.
Regards
Venkat

Hello,
Could you please share more information about this? We need to do the same thing. How did you create your generic datasource? what table/Function module did you used?
Thank you
Ramona

Regarding information about XI

Similar Messages

Maybe you are looking for