Regarding Infosource Assignment

Hi All,
I need clarification regarding Infosource Assignment. I am doing Business Content Extraction. After we replicate the Datasource, I am selecting I am assigning infosource, by selecting the option "Assign Infosource" in the context menu of the Datasource. Here we will get three options:
1. Content
2. Application Proposal
3. Others
Can any one give me information regarding these three options.
Regards
Ravi Y

hi,
1. content means business content assignment, system will automatically determine the business content infosoruce, in business content installation/activation, you may use 'in dataflow before' with source system selected then system will install the datasource.
2. application proposal, i think this means application component, system may propose based on the same application component name of datasource and infosource.
3. others, we 'free choice' the infosource.
in your case, the option should be 'content' since you use all business content.
hope this helps.

Similar Messages

  • Inconsistent Dev System: Infosource assigned to incorrect Source System

    Hello all
    Our Development box contains inconsistent assignments of infosources to source system.
    When I compare the dev, quality and production boxes I find:
    > Quality and Prod are consistent and all infosource systems are assigned to correct source systems - all loads execute as expected.
    > However I find ips defined in the process chains in Quality and Production under incorrect source systems in the Development box.
    > Also, the inconsistencies are varied for ex: SALESORG_ATTR is assigned to source system Y, while SALESORG_TEXT is assigned to source system X, while 0CUSTOMER_ATTR is assigned to source system Z ( where Z is the correct source system).
    I have not been able to figure what lead to this inconsistency except that I am aware that there were plugins installed and some refreshes done followed up by BDLS.
    I did try having BASIS execute BDLS to convert all logical systems X to Z ( but there were errors in the log stating that destination Z already exists - which is correct since for ex 0CUSTOMER_ATTR is assigned correctly to source system Z)
    I was considering the following to rectify this situation:
    1> Make the rectifications manually
    1a> Identify all the infosources in all the process chains in quality/production
    1b>Manually reassign all infsources/datasources to the right source system
    1c>Check all the mapping rules (transfer rules) and ensure they are same as quality/production
    1d> Activate the transfer rules
    1e>Create infopackages
    1f> Transport the ips to quality and reassign them to the process chains.
    > This is a very labourious task and invovles high risk due to manual effort
    2> Refresh from quality into dev
    2a> Recreate the transport routes
    2b> Resynchronize all the loads with the R3 dev box
    > This would cause loss of version history and therefore not recommended by SAP
    3> Rollback to a restore point
    3a> We would need to find whether we maintain a restore point in the past before which the system were consistent.
    3b> Reimport all the transports from the restore point till date
    4> Rerun BDLS
    4a> This might involve deleting all occurences of source system Z from the dev box
    Please advise what would be the best approach / if theres a better way to address this issue.
    Thankyou
    Edited

    Hi,
       Goto RSA1 in yy BWQ system.
    In the Menu ---> Tools --->  Mapping of Source System Names ( Shift + F6)
    Change the Target Source System as BWP server.
    Now move the transport to BWQ. Your BWP will be assigned as source system.
    Regards,
    Balaji V

  • DB Connect: Infosource assignment problem

    Dear Colleagues,
    You have been always helpful when needed and I have always given credit to your help. So coming to problem I am facing now...
    I am using BW 3.5 and MS SQL as a datasource.
    DB connect is successful and now for doing extraction test, I have created one table in MS SQL and trying to load that table in BW. Created the DB source system, tested successfully, created Infosource and assign datasource to Infosource. Data target is also created. Till then everything is find.
    Now while loading the data, in monitor it gives the error "<b>No mapping available for DataSource 6DB_XXXX. Assign an InfoSource. Error in Source System</b>". Whereas Datasource assignment to Infosource is created and activated successfully.
    I search the entire forum, but did not get any proper solution for this.
    Please do help.........
    Regards
    Pankaj

    Pankaj,
    If you deleted and then made again an assignment it wouldn't help.
    There is something wrong with your DS. You need to regenerate it again. For this you need to delete an IS-DS assignment first. After that you'll generate a DS again. Then make a replication.
    Don't know why you couldn't see a replication option. Do you see something like "Select tables"?
    And how did you create a DS?
    Best regards,
    Eugene
    Message was edited by: Eugene Khusainov

  • Regarding Account assignment categories in ECC 6.0

    Hi All,
    My client is going for a upgrade from SAP r/3 4.7 to ECC 6.0, In this process while creating Emergent orders in PLant maintianence module, an error "Invalid Account Assignment category" is arising with the following explaination under diagnosis.
    In Customizing define the account assignment category for service and maintainance orders.
    In standard, define the following for the order category 30:
    Account assignement type (general) F
    Account assignement type (Project) Q
    Account assignement type (Sales Order) E
    Sales document project D
    Do I need to create these new account assignment categories in SAP ECC6.0 to overcome the error.
    Also in this Account assignment config, Is special stock going to play an important role. Can anyone please explain what exactly the impact is on the bussiness if we assignt the Special stock categories.
    Has anyone who did the upgrade created these account assignment categories for the PM module.
    Regards,
    Shane

    Hi Ha Tran,
    Some of these Account assignment categories have been deleted from the system before and I am creating these categories refering to the standard system. Thanks a bunch for your prompt answer.
    Regards
    Shane

  • Regarding  dynamically assigning the where clause to select query

    hi,
      Please send the code regarding how to dynamically assign the where clause to select query.
    thanks in advance

    SELECT <fileds>
            INTO TABLE itab
            FROM dbase
            WHERE  condition.

  • Regarding Org assignment record create/delete

    Hi All,
    I have created a postion and assigned a holder , as i have doen mistake in period creation i have deleated that position , and created a new postionand holder with correct period.
    but in org assignment infoype 0001 these old and new record got saved.Is there any possibility to deleate thsi record.
    Regards

    Hi
    Do remember that whenever an OBJECT ID start date is wrong, try to correct it with the program. RE_RHBEGDA0. This will correct the start date of the OBJECT IDs.
    I think, the new record is in 0001 - Organisational Assignment.
    1) Try to delete the first record, then go to delete the wrong entry record.
    2) Try to change the first record with the date of the wrong entry date, so that it will get delimited.
    Regards
    Team Member.

  • Regarding dynamc assignment of dates in a variant

    hi,
    i know how to give dynamic values to the dates in a variant
    but when the same thng i am trying in ECC 5.0 then a diiferent screen is coming and while assigning dynamic values to the dates, whenever i am giving a date less than the system date its always saying
    <b>lower limit is greater than upper limit</b>
    even when in the date from i am giving ( system date - 60 ) and in date to i am giving  ( system date + 45 )
    its saying lower limit is greater than upper limit.
    Can anybody help me in this issue
    if anyone can try it out in ECC 5.0 and send me the screen shots that will be a great help
    waiting for your reply

    Hi Ashish,
    Following are the steps :
    1. While saving the variant, Goto the Selection Variable column in the table and specify the value as 'D' after selecting from the F4 Help given for the column.
    2. Then in the last column 'Name of Variable' , click on the F4 Help provided.
    3. In the given options select the option Current Date - xxx, current date + yyy.
    4. When u double click on the option it asks for the values of xxx and yyy.
    5. Give values say xxx = 3 and yyy = 4.This will display the current date - 3 days and current date + 4 days as the select-option parameters.
    6. Save the variant.
    Hope this helps u.
    Regards,
    Himanshu

  • Regarding Smartform Assigning to TCODE MR90

    Hi Friends,
    I have my Print program and Smartform designed for which if i see Print preview it looks fine .
    But when this Print porgram assigned to Tcode MR90.
    There when i am seeing Print preview i still get my O/p as expected But when i hit Execute button for which spool get created some times certain values which are totals in my smartform values changes for the same in print preview looks Good.
    What can be the issue when i get my preview correct but Spool data shown incorrectly.
    Regards,
    Poornima

    Hi Sachin,
    These are variable which i am populating in Printprogram and passing through Interface parameters .
    If its the case with clearing varible should it not be the case with when i see preview also ?
    But Thanks for the reply.
    trying  on the same end clearing variable and all .
    Regards,
    Poornima
    Edited by: Pendyala_poornima on Dec 1, 2010 7:54 AM

  • Regarding user assignment

    Hi Folks,
    Initially we assigned the user to the purchase organization and purchase orders created by him after GO live.Later business raised an issue  and saying that Assign me tab is not working for that particular user in Sourcing cockpit.As we analysed the Assign me and action tab in the sourcing cockpit is highlighted when  the user is assigned to the purchase group only in org structure.
    Hence we thought of assigning that user to the purchasing group.my concern is,Will we get any inconsistencies if we assign the user to the purchasing group now.Because  some of the documents already created with that Purchase org  assignment.Please share your views in order to solve our issue
    Thank you,
    chakradhar.

    Vijay,
    Check if this link helps you...
    Sales Manager partner determination
    JD

  • Regarding Account Assignment Model

    Hi, I would like to know whether can customise by add the "Profitability Segment" to Account Assignment Model screen template? Thanks.
    Message was edited by:
            LOI ESTHER

    Yes, you can add any field, even Z.
    Check note 2596.

  • Urgent regarding agent assignment

    hi guys...
    while creating a task we find
    1. Agents
    2.Agent Assignment(Task properties)
    what is the difference b/w these 2 things...
    like what i know about agents or agent assignment is ,
    that particular agent is responsible 2 do that task.
    waititng for ur reply

    hi arghadip...
    thank u for ur valuable answer...
    can u explain me with one simple scenario...
    so that it will be much more helpful 2 me...
    like i wont be confused any more.
    waiting for ur reply..
    thank u once again..
    bye.

  • Regarding Organizational Assignment

    Hello Good Evening,
    Iam practising SAP HR had a problem with Master data.
    In PA30 while iam entering the details and saving it is asking for fiscal year and chart of accounts,
    can somebody help me to resolve this.
    regards

    Chart of accounting can be done in OB13
    Fiscal year in OB37

  • How to transport inforource assignment for virtual cube?

    hi,
    I have created SAP Remote Cube on dev, transported it and its infosource, but I do not know how to transport cube - infosource assignment.
    How to do this?
    Regards,
    Andrzej

    hi Maran,
    you were wrong, but I solved this problem - system assignment is not transportable.
    http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
    Regards,
    Andrzej

  • How to load number of infosources to one infocube

    hi
    gurus
    can anybody give clear example how to add no of infosources to one infocube in the flat file & in r/3
    i tried in flat file i am getting error when loading second infosource
    please try to provide with example ,i am verymuch confused about this
    thanks in advance
    venu

    Hi Venu,
                I am giving one  example
    R/3 :
    1.You have no of  data sources( 2lis_02_scl_,2lis_02_xxx,...) now you have assigned these d.s to diffrent  info  sources.Now you have diffrent info  sources  right.
    Create a Cube with necessary  info  objects that you need.Now you want to connect all these info  sources( 2lis_02_scl_,2lis_02_xxx,...) to cube.So create u.r for each(Ex: U have three info sources create three u.rules).In the u.rule u  have  to mention clearly for which objects needs to be assigned.
    Flat file :
      2. Same as above for  flat files.
    Regards
    Ramakanth
    "Assign points if useful"

  • How to identify the infosource name for any ods zpxrrm?

    hi all,
    How to identify the info source name for any ods that have created.
    thanxs
    haritha

    Hi Haritha,
                   Check the datasources from which the data is coming to the ODS.Take the technical name of the data source.Check in Infosources Tab.There you can find in which infosources the ODS is present.
    Hope this solves
    Regards
    Karthik
    Assign points if helpful.

Maybe you are looking for