Regarding Infotype creation
Hi All,
I have created a an Infotype.I have entered two entries in it.
But when i am going to PA30 to view this data system is giving a message that No Data stored for this paricular selection period.But i can see the data when i Execute PM01.
So please suggest me on this what to to do.
Thanks.
Regards
Ram
Hi All,
Thanks for our reply.
If i am giving the date selection period it is working.But if i am giving an employee number and and my custom infotype number and by clicking on the display i could not get data.so please suggest me on this.
Thanks.
Regards
Ram
Similar Messages
-
Pa custom infptype and org management infotype creation
hi experts,
pa custom infptype and org management infotype creation
steps are same or not.
If any difference b/w both plz give me step by step procedure.
Regards,
SandeepPA infotype will create in PM01 everything we need fill from PM01.
OM infotype
:- 1. we need to create HRI9XXX structure.
2. PPCJ t-code u can create from this t-code.
PA INFOTYPE CREATION
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the `Employee Infotype' radio button.
4) Select the `PS Structure Infotype'.
5) Click on Create. A separate table maintenance window appears.
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on `All' push button. It takes a few moments.
10) Click on `Technical Characteristics' . Infotype list screen appears
11) Click on `Change'(pencil) button
12) Select your Infotype and click on `Detail' (magnifying glass) button
13) Give `T591A' as subtype table
14) Give `T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on `Infotype Characteristics' . Infotype list screen appears
18) Click on `Change' (pencil) button
19) Click on `New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement.
25) In the PM01 initial screen.Select `Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select `Layout Editor' and click `Change'.
27) Screen default layout appears.here you can design/modify the screen.. change the attributes of the fields. etc.
28) Save and activate. (Don't forget to `Activate at every level)
Edited by: sapabap229 on Aug 30, 2010 11:19 AM -
Organization Management/ Personnel Development Infotype Creation
Hi Experts,
Like Personnel Administration Infotype 9xxx,
xxx- series.which are created using PM01 Transaction.
What is the approach to create Organization Management/ Personnel Development Infotype Creation.
Do they have series 9xxxx.
Please advice.
Thanks in Advance.
Regards,
IFFHi irfan,
Have u checked this thread?Have a look at the pdf mentioned in the thread.
how to create OM Infotype
Check ur gmail as well.
Regards,
Manoj. -
hello all,
can anyone guide me on PD infotype creation?
With all neccesary steps or links for the same,
Thanks in advance,
YashviHi,
This was posted by some one else. I do not remeber the link. The following is the procedure
Enter the transaction code PPCI
Enter a four digit infotype number (9nnn) and an infotype name.
Select Field Infotype
Choose Infotype Create.
Choose Check environment to maintain the required entry in table T777I (Infotypes per object type).
Choose the Entry 'T777I' under the list of 'Table Entries' (This list is produced when you choose 'Check' on the First screen of the Transaction PPCI.
Press the 'Change' button and you will be taken to the 'Maintain Table Views' Transaction (SM30).
Press the Maintain button.
From the list of Infotypes locate the custom infotype created and select the entry for that.
Click on the 'Time Constraint' folder appearing on the left hand corner of the screen.
The screen for Change View Time Constraint would appear.
In the object type field put in: O,P,S whatever is relevant to your requirement.Also add the time constraint.
Save it and double click on the 'Infotypes per object type' folder (on the left hand side again).
Create a new entry here for your infotype and save it.
Regards
Vick -
Problem regarding the creation of Table using CSS.
Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
MadhaviHey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?
-
hi sap experts i have a query regarding infotypes ..
which infotype displays EEO Exmpt indicator and EEO reporting unit indicator and job classification ..please let me know ..
thanks in advance,,..Hi,
Its infotype 1610.
Regards,
LNB -
Regarding infotype 2 Dr title for country 47 turkey
Hello all techies,
Hope you are doing great.
I have one issue regarding infotype 2 for country 47 turkey.
In table T522G if I put "Dr" as a title for blank (for male and female)
I cant see that in infotype 2 for the maintenance purpose.
Is there any sap note I need to apply so that system will read Dr. title for both male and female ?
Please let me know.
Thanks and Regards
Jaydeep jadhavHi Jaydeep,
I guess this is the second time you're asking this question.
Please refer to my answer for your previous query:
Re: GESCH Feature
Regards,
Dilek -
Custom infotype creation issue
Hi Experts,
I have a requirement to create a custom infotype based on certain conditions. But there is a problem while saving data in the infotype. The infotype is populated from another infotype automatically through dynamic actions.
But while saving the data for the first time it happens as per the requirements and data gets saved properly.
But when the data is saved for the second time for the same pernr , the previous data is over written even though the new record starts with a different begin data.Also i have created the infotype with time constraint '1'.
can you please let me know if i am missing anything while creating or is this a logic issue .? all the logic has been coded in the flow logic part of the screen.
also if i dont save the data in the infotype it does not pop up any message like 'data not saved' which usually happens with every infotype. Please clarify me on this as well...
Thanks,
Raj Thilak.Hi,
Check the logic how it is updating the custom infotype . I think it is nothing to do with creation of custom info type
Regards
Krishna -
Hi
I need to validate the creation of record in a custom infotype such that the record can be created or exists only when there is a record in another subtype of the same infotype. Please can you advise what would be the best way to achive this?
Regards
RajeevHi Rajeev,
You will have to use USER EXITs for this purpose.
While saving this particular custom infotype of yours you can query the PA9XXX table for the other subtype.
If it exists then you can continue saving or else you can throw an error message.
Please contact your HR ABAP person to look into it.
Hope this helps
-Ajay -
About Infotype Creation in ECC6.0
Hi All
Actually my requirement is create a custom infotype and use this infotype in pa30.Buy i am using ecc6.0 version.
I know in 4.7 version only. Try to send me steps about create infotype in ecc6.0 version.it is very urgent requirement.
Regards
hariSteps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Regards. -
Hi All,
I have created a custom infotype with time constraint 2 which has the multiple records for pernr.( Similar to Infotype 0168).
When i am inserting the record since there is same key for the pernr its not inserting the data in the table pa9001. so i tried to insert by means of adding the SEQNR and inserting the data. But there is an error poping up saying "Sequence Number 001 not permitted" its not allowing me to enter the value.
Can you please help me.
I have used the USER EXIT for inserting the data.
Thanks
YogeshAs Subhash said, you need to create IT with time constraint 3. With time constraint 3, if you creating more than one record on same day, the SEQNO increments. If day differs (BEGDA, ENDDA) SEQNO starts with 0. If time contraints 2, gaps are allowed, (BEGDA, ENDDA) should be different.
Check T777Z entry.
Regards,
Ramki. -
HR-ABAP-regarding infotype 0041-dates specifications
Hi All,
Can any body help in this problem that.
I am retrieving one particular date from infotype 0041 by passing the date type U9.
I want to know from which dardt(date type field in PA0041) i.e., dar01 or dar02 or dar03- - - - dar12, the date is coming .
Pls let me know urgently this.
Andvance thanks for all of your efforts.
Thanks&Regards,
Jeevakala.Hello,
The option i have implememted for a similar scenario is as follows
data: v_darxx like p0041-dar01,
v_datxx like p0041-dat01.
select single * from pa0041 into int_pa0041 after passing key fields
do 12 times
varying v_darxx from i_it41-dar01 next i_it41-dar02
varying v_datxx from i_it41-dat01 next i_it41-dat02.
if v_darxx = 'U9' and v_datxx gt v_dat.
"You have your required date
endif.
enddo
the same has been discussed in the following link,
Reading dates from infotype 41
Hope the suggestions gave you some idea
Reward if helpful
Regards
Byju -
hi experts plz tell me the procedure to copy standard infotype in pm01, i want copy of 0591infotype ecc 5.0 is my version
Hello,
The option i have implememted for a similar scenario is as follows
data: v_darxx like p0041-dar01,
v_datxx like p0041-dat01.
select single * from pa0041 into int_pa0041 after passing key fields
do 12 times
varying v_darxx from i_it41-dar01 next i_it41-dar02
varying v_datxx from i_it41-dat01 next i_it41-dat02.
if v_darxx = 'U9' and v_datxx gt v_dat.
"You have your required date
endif.
enddo
the same has been discussed in the following link,
Reading dates from infotype 41
Hope the suggestions gave you some idea
Reward if helpful
Regards
Byju -
Hello,
To create a thread in java there are two methods.
(1) by extending from thread class.
(2) by implementing runnable interface.
implementing runnable interface is the preferred method to create a thread because we still have the option to extend from any other class.
But does anybody know why java provides 2 methods for thread creation, why doesn't it provide only option 2 (i.e. by implementing runnable interface) when it is the preferred option.
Regards,
Sandy.Though Runnable interface is preferred to create threads in Java,most programmers extends Thread class.As jschell would say, 'I am rather certain' that the opposite is true.
The reason behind of this is that you can have a clear logic of your code by using ThreadThat's not even true and it certainly isn't a reason to extend Thread rather than implement Runnable.
most of the system programming written in java used Thread class instead of Runnable interface .If you have some evidence on the point please produce it. The consensus of opinion on these forums has been the other way round for many years. -
Regarding equipment creation..
Hi Genius,
Now I want some details about Equipment creation in PM module, and what r all the table comes... please send some link to learn equipment creation.hi thanus,
This is vijay here, currently i m working with this epm module.
for equipment creation you will use ie01 for change ie02 and for display ie03.
some times you may be asked to create by regarding doccument no.
then go to j3gi.
well main fields are equipment no, recipient, sender, planning plant, maintenance plant, bussiness area, company code etc.
there r lots of table.
but usefull are
equi,faglflaxa,j_3gbelp,j_3gbelk,iloa,ITOB,EQKTX,IMPTT,IMRG,CKBS,CKIS ETC
REGARDS
VIJAY DWIVEDI
REWARDS IF USEFULL*
FOR ANY FURTHER INFORMATION U CAN GET BACK TO ME
Maybe you are looking for
-
Hey guys, I don't understand why I keep getting Kernel Panics. I have replaced my RAM and HDD but the kernel panics started happening a few months before then. I then took my MacBook Pro to the Apple store and they kept it overnight. 3 days later I g
-
Are there any free safe anti-virus downloads
are there any free safe anti-virus downloads compatible w/windows 2000
-
How many tables can i create in Oracle 10g ?
hi every body ! how many tables can create in oracle 10g ? thank you !
-
Oracle form 10g( 10.12.0.2 ) How toi test Form locally
Hi All, I'm doing my development in Windows XP and database in in UNIX(AIX) server. Could you tell me how I can test my form in Windows XP machine and wapplication I need to install and how to config it? Step by step instructions will be a great help
-
Hello, we have installed a Trex 6.2 and want to use it as standalone searchengine for our website. How can i crawl over our website and use the Trex in the mentioned way? Thanks for hints an help, André