Regarding INIT to multiple targets

Hi,
Here is my scenario. I've to do init from ODSA to ODSB and ODSC (for both same selection criteria).
I initialized ODSB. But while trying to initialize ODSC its saying to delete the previous INIT request.
How can I initialize ODSC without affecting initialization of ODSB?
Regards,
Vikrant.

Hi Vikrant,
The scenario I mentioned does "reconstruct", however since ODSC already had some requests earlier loaded/deleted, it appears that the reconstruction just reconstructed the "already loaded/deleted data".
Perhaps deleting the update rule for ODSC and recreating them followed by the process I mentioned would let you load all the requests from ODSA to ODSC.
Alternatively you might want to create a copy of ODSC to ODSD and test this process in your development, this should let the new datatarget ODSD to get all the requests from ODSA through reconstruction. Hope it helps,
Cheers,
Sree
Message was edited by: SSree

Similar Messages

Loading Data to Multiple Targets in BI

Hi Experts,
I have one doubt regarding data load to multiple targets in BI. I explain clearly- the scenario is to load the data coming from one source system to multiple Data Targets in BI. Like in BW, we will just create multiple update rules from InfoSource to different targets. In InfoPackage maintenance screen, under Data Targets Tab, we will select the respective targets which we want to load and we run the InfoPackage, it will updates the data to all the selected targets in the infopacakge.
But in BI, how we will implement this scenario, bcoz here we need to create the individual DTPs, and there is no options to load the data simultenaously to multiple targets.
So, is there any solution to implement this scenario in BI, plz expalin.
Thnaks in Advance
Ragards
Ramakrishna Kamurthy

Hi Dennis,
No worries at all. I've been trying different approaches and strangely it does seem to load data packages faster when going via an InfoSource. (I don't understand why). However, it doesn't want to do it parallel.
Whereas when I went loaded direct from the DataSource to DataSource, it processed data packages twice as slow but three at a time. The result being without the InfoSource was faster. This can be seen in the DTP Process Monitor and in SM50.
Both DTPs had the default setting in Settings for Batch Manager of 3 parallel processes.
Our batch queues in SM50 have not been blocked with other processes.
Has anyone else had problems with parallel processes when loading via an InfoSource?
Thanks
Adrian
P.S.
I think I've discovered two cases where InfoSource may bring performance improvements:
Filtering Records
Transformation A includes the common and more simplistic transformations. e.g Sets a flag "Relevant" for certain conditions being met.
Transformation B includes the complex transformations. At the beginning of B, you include a Start Routine that filters out records not marked "Relevant". That way it only does the complex work on relevant records.
Time Conversion
If your Data Source has Fiscal Period, but you wish your DataTarget to have Calendar Month, you need to write a routine to covert if you extract direct from DataSource to DataTarget.
Whereas, if the Fiscal Period is passed to an InfoSource, you can use Time conversions or formulas to convert Fiscal Period to Calendar Month in a transformation between InfoSource and DataSource
Edited by: Adrian Bell on Jul 31, 2008 9:33 AM

Multiple flat file in and multiple target tables

Hi,
How can we have multiple flat file into multiple targets.
I am trying to load data from multiple flat files into respective tables. But it gives error like
VLD-2411: Cannot handle two file structures
Make sure that only one file structure is used in a SQL*Loader map
Can anyone help.
Regards
Rakesh Kumar

I donot thing in one mapping you can take multiple sqlloader file.
If want to load data form multiple file use External table.

Multiple target messages

Hello,
for our business process, we need to map a single source message to multiple target messages (of different message types).
The (ABAP)mapping takes care of this mapping, so I put a transformation step after my receiver step, that invokes this mapping.
What do I have to define after the transformation step: do I use a fork or a send-for-each-block or ... ? Since we're on SP15, can we use the "extended" option in the interface determination to facilitate our process ?
Thanks for your answers !
Kind regards,
Frederik

Hi,
What is the SP that you are using. If it is XI 3.0 and SP less than 14 then it is not possible. You need to use Abstract interface.
And why do you need Multimapping in the first place. You can do a simple mapping and in the receiver determination you can add more Business Server/System. Each Service/System you will have seprate IB interface and a separate Interface mapping.
Hope this solves your problem.
Thanks,
Prakash

Multiple Target Files as the number of times Item in source node

Hi all
I am new XI ,my scenario is File to File and my data type structures for source and target are as follows
Data type for source
Source
     Header      1:unbound
         Org       1:unbound
In declaration of target data type occurrence of all child nodes are 1:unbounded. And I have used it in Message type and in message mapping for my target message type occurrence is showing as 1:1.
My objective is to replicate this entire Target as the no of times the Item is occurring in source ie for multiple items in source I want multiple target files. For this I have mapped item node of source to Target(parent node). But in mapping test it is only displaying one Target structure for multiple nodes in source. Please Help me in solving this issue

Hi Satish,
Use Multi Mappings :
When you create message mapping change the occurence of target from 1 to unbounded. This will allow you to create multiple target structures.
Then map them accordingly as per your need and you can see multiple output in test.
Just you have to be more focused on the context and for that you have to go thro' the mapping documents.
Search related documents on SDN and go thro' them.
Regards,
Shri

Multiple Target files as the item in source file

Hi all ,
I am new XI ,my scenario is File to File and my data type structures for source and target are as follows
_Data type for source:     _
Source
      Header     1:unbound
          org       1:unbound
          order     1:unbound
      Item             1:unbound
           itemno   1:unbound
           matno   1:unbound
Data type for Target
Target
     org          1:unbound
     order        1:unbound
    itemno      1:unbound
   matno         1:unbound
In declaration of target data type occurrence of all child nodes are 1:unbounded. And I have used it in Message type and in message mapping for my target message type occurrence is showing as 1:1.
My objective is to replicate this entire Target as the no of times the Item is occurring in source ie for multiple items in source I want multiple target files. For this I have mapped item node of source to Target(parent node). But in mapping test it is only displaying one Target structure for multiple nodes in source. Please Help me in solving this issue .
Full Points will be awarded
Thanks & Regards
Satish.

Hi,
If you want multiple Targerts you need to use UseOneAsMany.
check below link
http://help.sap.com/saphelp_nw70/helpdata/en/38/85b142fa26c811e10000000a1550b0/content.htm
Thanks,
RamuV

OEM12c Job - Run a SQL Script from a central location against multiple targets

Hi All:
I need to execute a SQL script that can be run as OEM Job against multiple targets from a single location so that the output csv files are all in that central location. My problem is that the sql script job documentation says "Make sure that the script file is installed in the appropriate location on all targets". Is anyone aware of a way I can do this so that the SQl script is executed from a location on my OMS console?
Cheers

Hi
Create SQL job to run against on the server. Save those results (csv) file in local target. And crete one OS job, to collect all csv files into your OMS Console.
Regards
Krishnan

Single source to create multiple target nodes

Hi Guys,
I need to create multiple target node as many occurrence of source node. how should i achieve it?
Source node (1...999999) to Target node(1..1)
please suggest.
Regards
Swapnil

Hi Nutan,
Sorry formatting got messed up so posting again.
Sorry for the confusion. Target structure is 0..unbounded.
Source structure ...................................... Target structure
Message 1 ...................................................Message 1
ZHRMD_A07 (1...1)..........................................MT_EMPLOYEE (0....unbounded)
E1PLOG1(1...unbounded)................................ Field1
I need to create MT_EMPLOYEE multiple times depend upon occurences of E1PLOG1.
Regards
Swapnil
Edited by: Swapnil Bhalerao on Mar 3, 2010 12:41 PM
Edited by: Swapnil Bhalerao on Mar 3, 2010 12:47 PM

Need file to fiel scenarion with multiple target

Need file to fiel scenarion with multiple target with screen shots
Thanks & Regards
Sateesh

Hi,
I could not understand your Qn.
Nageswar.

Batch Automap to Multiple Target Applications

Hello,
I've Googled and read through the admin guide but I'm still confused with this function. I have multiple target applications in one FDM application and I need to setup an automap function for all the target applications.
I would be very grateful if someone could answer the following questions and describe the process.
How do you set “AutoMapCorrect” location for multiple target applications since there are different dimensions in each application?
Do I have to add a suspense member for each dimension in every target application?
I’m not sure how to produce a report that will tell a user: Here are the automapped members of the outline that kicked-out during this run?
Any help is greatly appreciated.
Thanks!

As far as your first 2 questions, I can not provide a lot of help, as I'm pretty sure the out of the box automapping works only for the default adapter but I'm not entirely sure on that. To the 3rd problem, I've implemented a little script and put a taskflow associated to it in menumaker. I've toned this down a bit so I may have missed something in the syntax, in my implementation, I also removed the records of the suspense mapping to help push the user to fix them on a timely basis and added some error trapping. This was done by changing select * to delete * from tDatamap.
    strSQL = "Select * from tDatamap "
    strSQL = strSQL & "Where SrcDesc = 'Auto Map Suspense'"
    Set rs = DW.DataAccess.farsKeySet(strSQL)
    If Not rs.bof And Not rs.eof Then
        Do Until rs.eof
            lngCounter = lngCounter + 1
            strProblem = strProblem & rs.fields("srcKey") & vbcrlf
            rs.movenext
        Loop
    rs.close
    Set rs = Nothing
        RES.PlngActionType = 2                '(See Enumeration: ScriptActionTypes)
        RES.PstrActionValue = "The Following were the suspense Maps" & vbcrlf & strProblem
End Sub
Regards
JTF

Multiple Target from an XML file problem

I've an XLM file from which I import (using a pluggable mapping generated from xml_etl_ulils) data into a table.
I need to execute some controls and log errors on these data.
I created a splitter to split correct data (and put them into the table) and bad data (to log).
However the generated mapping goes into an error because it tries to read 2 times the same XML data.
The only way I found is to put all data (good and bad) into a temporary table and then apply the splitter to move data from that table to the targets.
However that is not a clean solution because I need to have and manage 2 tables for each real table.
Any clever suggestion ?
Tks
Tullio

What is the exact error you get (what db version also), could you post a simplified version of the SQL which fails also? I have splitter based maps that successfully read from file via the XMLType(bfilename....) style code and insert into multiple targets, I did this on 11g though.
Cheers
David

1 Success Caption for Multiple Targets in a Drag and Drop Interaction

I see how I can add success captions to each target in a drag and drop interaction, but can you apply only 1 success caption multiple targets?

The boundaries of smartshapes were overlapping with each other. For example, the smartshape on 1st line was overlapping with the one on 2nd line. Due to this, every time you place the text caption "Investment" on the smartshape on 2nd line, it automatically moved to the smartshape on 1st line. As a result, you could never get the answer right, and hence you never saw the Success Caption.
Solution: Move the smartshapes away from each other (or resize them), and ensure that there are no overlaps.
2, The number of attempts for this interaction was set to Infinite. So, you have to play this until you get it right, but you could not get it right because of the reasons mention above. That is why you never saw the Failure Caption.
Solution: Clear the Infinite check box in the Action accordion and specify the required number of attempts. You will get the Failure Caption if you don't get it right in those attempts.
I just tested these solutions and they worked fine. Let me know if you still face any issues.

Multiple target dn's in one ACI?

Is it possible to put multiple targets in one aci? This is for an anonymous access ACI that I want to only allow certain ou's to be seen anonymously, but want to keep some others hidden. I tried just doing || 's in between dn's just like you would do targetattr's but that didn't work. I could do this with separate ACI's but it would be much simpler if I could do it with one.
BTW this is running on DSEE 6.3, if that matters.
Thanks in advance!!!
Matt
Edited by: keesor on Jun 26, 2008 7:57 AM

I've been thinking about this issue since your original post.. I was wondering if it'd be possible to use macro ACIs to implement this...
For example, you could create an objectClass called "publicOU" and assign it to your OUs you want to be public. Then, you could use an ACI like this (heavily borrowed from the DS 6.2 documentation):
aci: (targetattr="*")
(targetfilter=(objectClass=publicOU))(version 3.0;
acl "Allow Public OUs to be visible"; allow (read,search) userdn=
"ldap:///anyone";)
There may be more elegant ways to do this, but I think it would work...

Server 2012 R2 iSCSI Target - Multiple targets per iSCSI Virtual Disk with CHAP

Scenario I am trying to achieve is this:
Windows Server 2012 R2 serves as iSCSI Target configured to have 1 iSCSI Virtual Disk
2 Hyper-V servers connecting to this target with iSCSI Inistator and have multiple targets for that iSCSI Virtual Disk using CHAP
**These 2 are nodes in fail over cluster, this iSCSI is added as a CSV.
Issue that I have, is that you can only have 1 target per iSCSI Virtual Disk
Both Hyper-V servers can connect to this LUN without issue when I add both initiator IDs to the target, but once I enable CHAP, you can only put one initiator ID in the "Name" field, so I can only connect from 1 Hyper-V server.
Do you know of a way around this?

From my understanding, "chaptest" is a single target, my goal was to make 2 targets to the same iSCSI virtual disk.
So if you were to right click the iSCSI virtual disk that "chaptest" is assigned to and click "Assign iSCSI Veritual Disk...", then select "New iSCSI Target, and proceed with the wizard it removes the "chaptest" target
and adds the new one just created.
My goal was to have 2 targets to 1 iSCSI VD, but seeing your screenshot, with 2 initiators connected, that goal doesn't seem needed anymore.
I was under the impression that the "User name" = the iscsi initiator IQN name, which had to be unique. That is why I thought I would need 2 targets.
Thanks

How to put multiple targets in ODI

Hi All,
Can i know how to put multiple targets in Oracle Data Inegrator.
Thanks in Advance!!

You can have one target per interface. There are some KMs in ODI 11g to generate Oracle multi target insert statements or Teradata comparable ones. You could also hide additional inserts under the hood in a KM if it is a common design pattern.
Cheers
David

Regarding INIT to multiple targets

Similar Messages

Maybe you are looking for