Regarding input output field of the screen painter

Hi Experts,
I want to increase the height of the input output field in the screen painter.
ie, multiline input output field.Is there any means?
Or is there any alternative other than the input output field?
Thanks & Regards,
Soumya.

hi,
when u drag n drop some fields in the screen goto to one of the corners of dat fields drag to the extend u want to increase.
or in attributes section for u length n width of dat fields are available just increase to your wish.
if helpful reward some points.
with regards,
Suresh Aluri.

Similar Messages

Deleting the Input/Output Box from the screen

Hi
I created a input/out put box on a screen.Now I am unable to delete the input/output box.As i dont find the delete option any where.Please suggest the needful.I m using ECC4.6.
Regards
Rudra

Then in PBO just seach for the screen name for which you have make it invisible.
and put screen-invisible = '1'.
but this should be written with in a loop.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 7, 2008 12:56 PM

How can i add input/output fields in the subscreens

Hi folks,
I want to create two subscreens onto a main screen.
For that, i went to se51 and defined a main screen e.g.1100. with normal screen attributes.
Again, in the se51 initial screen i gave screen number e.g.110 with subscreen attribute.When i go to layout of subscreen i am unable to add any field or push button to that..
My issue is to display the drawn data on a subscreen.
Thanks for your answers in advance.....
Regards,
Ranjith.T.

hi for subscreens do like this..
REPORT ZDATEDIFF.
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW TITLE title.
                                    PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
                                    VISIBLE LENGTH 10.
Parameters: p_name like sy-uname,
            p_pas like sy-uname lower case.
SELECTION-SCREEN skip 1.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(70) text-001.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 500.
*title = 'HAI VENKAT LOGIN PLEASE'.
CALL SELECTION-SCREEN '0500' STARTING AT 10 10 ending at 70 14.
AT SELECTION-SCREEN OUTPUT.
loop at screen.
check screen-name eq 'P_PAS'.
move: 1 to screen-invisible.
modify screen.
endloop.
start-of-selection.
if p_pas = 'venkat'.
write:/ 'this is working'.
endif.

How can i make the input/output field to a multiple lines in ModulePool...

hi all...
can any one please let me know, is there any possibility thru Module Pool program where i can make the input/output field to a multiple lines...
say, when we drag & drop the input/output field on the screen - it'll come with single line display. so, how to make the same field to multiple lines field.
rather i can say my question like, how to increase the height of the input/output field.
Desired Functionality:
The user wants to display a long text.
now the input/output field should not display the record as a single line, now the field has to display the text in multiple lines (something like wrap option in ms excel).
hope u got my question...
please help me in this regards...

hi Rengith, i'm not using Text Field, i'm using Inpu/Output Field to display the long text.
If u mean text field as input/output field then can u let me know the process for this, how to do the same thru module pool program...
Edited by: murashali on Mar 18, 2008 1:36 PM

Setting value of input/output field of screen in abap program

I have a screen.I have added a input/output field in my screen.The purpose is i just want to display a text in that field upon PBO through my abap program.I m a newbie.PLS help me
Also can i use textfield instead of input/output field for this purpose.if so then wats the difference between both of them

Hi
To display a text in I/O element, go to the PBO of this screen and
assign the text to your I/O element.
Lets say if TEXT_IO is the name of ur UI element, and you want to display "Hello" into it, do it as follows:
TEXT_IO = 'Hello'.
Must ensure that the type of this UI element is CHAR type and you define its lenght properly.
to display "Hello", length would be 5.
Hope it will solve ur query.

Multiple select option in the screen painter

Hi all,
I want to give multiple select option for a particular field in the screen painter.
how to provide it.
Nitin

Hi,
Refer to this link..[Select-Option in Dialog programming |Re: Select-Option in Dialog programming]
[How to make select option in module pool |how to make select option in module pool]

F4 help for the selection screen field designed in screen painter

Hi all,
I have designed selection screen in the screen painter. in that for one of the fields i have to give f4 help. for that i have writter the code in PAI event. in this event i have used the standard Function module for f4 help. but no f4 help is comming for that field. can any body suggest what i have to do.
Thanks & Regards,
Giri.

Hi,
You must use the correct event to meet ur requirement use POV event instead of PAI event.
for more clarification and example program see below the demo program
DEMO_DYNPRO_F4_HELP_DYNPRO
DEMO_DYNPRO_F4_HELP_MODULE
Cheers
fareed

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

How to get center alignment of Input/Output field in Module Pool

Hi Friends,
I am using Input/Output field in my Module pool program. Dynamically i am submitting the text to Input/Output field. What i want is i want to display the submitted text as center. By default It is displaying left aligned.
Thank U in advance.
Mahender.

Hi,
Use syntax "Centered".
take one variable push into the field
write w_variable1 to w_variable2 centered.
next push the varaible to Destination screen input/output Field .
Make sure the Field the Character Type.
Prabhud@s

Radio Buttons + Required Input/Output Fields in Dialog Programming

Hi All,
Please find the below issue.
I have 2 Radio buttons
RB1 and RB2 defined in group RG.
And by default RB1 is selected.
I also have 3 Input.Output Fields.
F1 , F2 & F3.
Now before displaying the Screen for the end user,
I need to display as follows:
A)
RB1 = X -
> Selected.
RB2 = Space -
>Not Selected.
F1 -
> Visible.
F2 & F3 -
>Invisible.
B)
RB1 = space -
> Not Selected.
RB2 = X -
>Selected.
F1 -
>Invisible.
F2 -
>Visible.
F3 -
>Visible.
When i am debugging, the value of RB1 is not X though it is selected on the screen (by default due to Radio Button Group) & hence the below code is not working.
*_PBO:_*
LOOP AT SCREEN.
IF RB1 = 'X' AND ( SCREEN-NAME = 'TXT2' OR SCREEN-NAME = 'TXT3' ).
         SCREEN-INVISIBLE = 1.
ELSEIF RB1 = 'X' AND ( SCREEN-NAME = 'F2' OR SCREEN-NAME = 'F3 ).
         SCREEN-ACTIVE = 0.
ENDIF.
Modify Screen.
ENDLOOP.
But when i select RB2 = X on the screen.
Value is getting populated .
Waiting for your hints/ideas/suggestions
Thanks
Sri.

Alright, you defined the radio buttons and grouped them. Did you also assign Fcode to the radio button group? if not already assigned the assign something to FctCode to the radio button. If you can double click on one and assign a name, this will automatically assign to other one. If you already did that... just ignore it.
Next, by defualt, RB1 will not be having 'X' though it shows selected but you can always make it by just writing the following statement in PBO (If you dont want to mislead anybody)
if RB1 = space and RB2 = space.
RB1 = 'X'.
endif.
If you have already done that the next step would be.... Assign a screen group value to the fields F1, F2 and F3.
for example, double click on the field F1, add GR1 in groups in first box and do the same for field text/label if any. Same way, assign GR2 to F2 and F3.
Then add the following code in PBO. (Someone or you can write it better. This is just an example)
LOOP AT SCREEN.
    if RB1 = 'X'.
       if screen-group1 = 'GR2'.
          screen-input = 0.
          screen-invisible = 1.
       endif.
    endif.
    if RB2 = 'X'.
       if screen-group1 = 'GR1'.
          screen-input = 0.
          screen-invisible = 1.
       endif.
    endif.
    MODIFY SCREEN.
ENDLOOP.
Good luck... It is working code.,

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
reward points if useful.
regards,
Vinod Samuel.

Change the value of the field on the screen

Hello All,
I want to change the value of another field on the screen when the user selects the value for a particular field.
For eg: If i select ship-to-party value on the screen by F4 based on that the sales office and sales group values should change on the screen.
I am modifying the internal table that has these values, but its not showing the new values on the screen.
Please let me know how to resolve this issue.
Points gauranteed.....
Thank You,
Suresh

hi
use at selection-screen on help request for field1
OR on value request for field1.
Use selection screen events.
AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN ON sel_opt1.
AT SELECTION-SCREEN ON test1.
AT SELECTION-SCREEN ON END OF sel_opt1.
AT SELECTION-SCREEN ON HELP-REQUEST FOR sel_opt1-low.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR test2.
AT SELECTION-SCREEN ON BLOCK block1
AT SELECTION-SCREEN ON RADIOBUTTON GROUP rad1.
Regards,
Prasanth
*Reward points if helpful

How to change height of Input/output field in dialog program

How to change height of Input/output field in dialog program.
I want to big message text box like e-mail message box.
so could anybody help me on this please
Thanks
Basu

Hi,
This is not possible directly.Place the icon button in the table field.when u click on that button a popup window will appear in that window place the text editor there u can write text and u can save it ok..
Award points if helpful.
Kiran Kumar.G.A

URGENT:: regarding adding new field in the info type0002

Hi,
I have added tax number in the 0002 info type through pm01 and CI include and then i creatad a sub module to calll the TAX NUMBER.
the added field is appearing in T588M table for that screen, but it is not appearing when i tryed to open a emploee that new field is not coming in the info type screen.
do i need to call this sub screen some where else.. if so please help wherei need to do what...
Please help on this...
Thanks suresh

Hi suresh,
You should also add the field into the screen through program MP .. 0002.
I advise you to add it from the P0002 structure which is the red dotted icon on the top part of screen maintenance screen.
Regards,
Dilek
P.S. Please reward if helpful

How to make a field on the screen of any transaction 'display only' in BADI

Hello All,
I am working on BADI. The requirement is that for a specific condition, the user should not be able to change the 'plant' field on the screen of the standard MM transactions ME22N or ME23N.
The field 'plant' should be grayed out and the user should not be able to even enter anything in that field. Is that possible? If yes, how?
Please help, it is urgent.

hi radhika
yes u can do that
probably u will have to do the customization using exits
the possible exits fotr these trxns are
Exit Name Description
ME590001 Grouping of requsitions for PO split in ME59
MEETA001 Define schedule line type (backlog, immed. req., preview)
MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
MEQUERY1 Enhancement to Document Overview ME21N/ME51N
MEVME001 WE default quantity calc. and over/ underdelivery tolerance
MM06E001 User exits for EDI inbound and outbound purchasing documents
MM06E003 Number range and document number
MM06E004 Control import data screens in purchase order
MM06E005 Customer fields in purchasing document
MM06E007 Change document for requisitions upon conversion into PO
MM06E008 Monitoring of contr. target value in case of release orders
MM06E009 Relevant texts for "Texts exist" indicator
MM06E010 Field selection for vendor address
MM06E011 Activate PReq Block
MMAL0001 ALE source list distribution: Outbound processing
MMAL0002 ALE source list distribution: Inbound processing
MMAL0003 ALE purcasing info record distribution: Outbound processing
MMAL0004 ALE purchasing info record distribution: Inbound processing
AMPL0001 User subscreen for additional data on AMPL
LMEDR001 Enhancements to print program
LMELA002 Adopt batch no. from shipping notification when posting a GR
LMELA010 Inbound shipping notification: Transfer item data from IDOC
LMEQR001 User exit for source determination
LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
LWSUS001 Customer-Specific Source Determination in Retail
M06B0001 Role determination for purchase requisition release
M06B0002 Changes to comm. structure for purchase requisition release
M06B0003 Number range and document number
M06B0004 Number range and document number
M06B0005 Changes to comm. structure for overall release of requisn.
M06E0004 Changes to communication structure for release purch. doc.
M06E0005 Role determination for release of purchasing documents
MMDA0001 Default delivery addresses
MMFAB001 User exit for generation of release order
MRFLB001 Control Items for Contract Release Order
regards
ravish
plz dont forget to reward points if useful

Regarding input output field of the screen painter

Similar Messages

Maybe you are looking for