Regarding Inso filter technology(Context Cartdridge) under Linux

Is Inso filter technology under oracle8i context serveer supports Linux or not?
If it supports, then how to install and how to use it? Is there any demo is available?
null

Thread continued at this duplicate posting:
Error Null Databinding context encountered -WSDL to Java webservice convert

Similar Messages

Using JCOP tools under Linux

Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbie

newbie2007 wrote:Hello.
I looked through the older web sites of IBM regarding the usage of JCOP tools under Linux.
I am interested in following questions:
1. Is there any separate distributon version of JCOP tools for Linux?
2. Can sample JCOP tools 3.1.2 plugin (for Windows) be used under Linux. What has to be modified? Also what additional tools have to be installed an used for communication with real cards through PC/SC readers.
3. Is JCOP simulation option available under Linux?
I'll appreciate any help.
Best regards,
newbieEverything should work, except for the target pack and the non-existent Linux Pegoda driver.1. The is no seperate Linux distribution. You just need a Linux distribution for Eclipse.JCOP Tools plugin should work under Linux, except for the target pack and the non-existent Pegoda driver for Linux.1. There is no seperate Linux distribution. You just need the Linux distribution for Eclipse.
2. Prior to JCOP Tools 3.1.2 the last time something was mentioned about Linux was in the release notes of 3.1.1b . In version 3.2.0 IBM added a linux_support page to the JCOP Tools user guide (see release notes and linux_support page below).
3. There shouldn't be any problems with the generic simulation. The target pack runs only with Windows though.
h1. Release Notes
h2. Version
JCOP Tools 3.1.1.b (Bärlach)
h2. What's new?
h3. 3.1.1.b
<ul><li>New simulation (fixed static obj/arr bug, fixed instance field token bug).</li>
<li>Applet privileges can now be specified in the launch configuration dialog.</li>
<li>The "exportmap" feature is now available.</li>
<li>The JCOP Performance Test Demo ("JCOP Factor") is now included.</li>
<li>Minor bug fixes.</li>
</ul>
h2. Known problems
<ul><li>Simulations do not run (Linux, MacOS X)
     The Eclipse update manager does not set the execute permission bits for the simulations. You need to manually <code>chmod 755</code> those files in ECLIPSE/plugins/com.ibm.bluez.jcop.eclipse_3.1.1.x/simuls/
</li>
<li>PC/SC Support (Linux)
     JCOP Tools only works with pcsc-lite 1.2.0.
</li>
</ul>
h2. Frequently Asked Questions
Please refer to the online FAQ at http://www.zurich.ibm.com/jcop/download/eclipse/faq/.
h2. Bug Reports
Please send bug reports to [email protected]. Make sure you include the following:
<ul><li>Problem description</li>
<li>Steps to reproduce</li>
<li>Eclipse version and build number (Help > About)</li>
<li>JCOP Tools version (Help > About; click on BlueZ icon)</li>
</ul>
h2. Using JCOP Tools with Linux (>= 3.2.0)
h3. ___
Overview
The current JCOP Tools release now also offer a version for the popular Linux
operating system. Both the Windows and Linux verson provide more or less the same
functionality, and JCOP application development can thus fully succeed on Linux systems.
Nevertheless, installation of the JCOP Tools differ between Windows and Linux
where the Linux version does not provide a simple installer as in case of Windows.
Additionally, the Linux version expects a properly setup Muscle PCSC installation
as soon as you want to use them together with physical, real cards. As Muscle
PCSC is still not shipped with most Linux distributions, you must download and
install them separately from the JCOP Tools.
h3. ___
Contents
h3. ___
Software Requirements
Linux distribution
The JCOP Tools simulation has been developed on a Fedora Core 6 system, but should also work in case of
many other recent Linux distributions.
Java Development Kit
The JCOP Tools have been developed and tested with the Sun JDK 1.4.2_13-b06
for Linux. Your success with other Development Kits may vary as there are
partly subtle differences across the different devlopment kits.
PCSC
The JCOP Tools use PCSC to talk with real cards on Linux. Most distributions
do not ship with Linux PCSC by default (Fedora Core 6 does), you must thus download it fromhttp://www.linuxnet.com
and install it by yourself. If you are used to software installation under Linux,
and are not afraid of compiling and installing software packages, this should
not be a hard problem. You have to download both the base PCSC package
(including PCSC daemon and client libraries) and separately the driver
for the reader you want to use. The PCSC package contains a test program
which should tell you whether your installation is set up correctly and
communicating with a card works. The JCOP Tools have been reported to
work together with Muscle PCSC version 1.3.1-7.
JPCSC
The JCOP Tools are shipped with JPCSC which you can also download athttp://www.linuxnet.com. JPCSC
is a JNI library which offers Java applications the access to PC/SC functions
by mapping their requests to an underlying native PC/SC implementation. The JCOP
Tools - mostly written in Java - thus depend on JPCSC to communicate with real cards
on Linux. JPCSC depends on a properly installed and setup PC/SC environment.
Especially, the JAVA_LIBRARY_PATH should list the directories where the
PC/SC client libraries and the native JPCSC library libjpcsc.so ( downloadable as binary from
Windows Binary Download Here )
are installed, the CLASSPATH variable should list th___
Miscellaneous
What should work
As soon as you setup your system correctly, there should only be minor differences
between using JCOP Tools on Windows or on Linux. Emulating a real JCOP,
debugging, shell, cap-file conersion should all be possible as in case of Windows.
What is missing
No drivers or tools are currently available for using JCOP30's in contactless
mode. If you need such support, please contact directly NXP
at for further assistance.
Copyright 2001,2007 IBM Corp. All rights reserved.
Edited by: lexdabear on Sep 28, 2007 4:13 PM (I hate the new edit)

INSO filter Arabic support

Anyone know if the INSO filter supports Arabic Microsoft Word documents? I'm using 9.2.0.5.0 on Windows, my index type is ctxsys.context and the lexer is the default lexer. I couldn't find any info on the language support in the release notes. Other language Word documents seem to work okay (e.g. Chinese, Japanese, Thai, Swedish, Icelandic).

Info on language support is in the user guide and reference, as well as the following doc:
http://www.oracle.com/technology/products/text/pdf/appendix.pdf
1) You stated that you are using the 'default' lexer. What lexer(s) are you using? The fact that you have Chinese, Japanese, and more languages being indexed (with no problems) indicates to me that you are using the multi_lexer as well as language specific lexers (unless you are on a newer release using the world_lexer). Please clarify.
2) I doubt your issue is with the word doc and the inso filter, but rather the text contained therein, and the ability of whatever lexer you are using to create appropriate tokens. We'll know better with your answer to #1.
3) I'd recommend you look at the user_lexer for Arabic once you find out the answer to #1. If you are on 10g, look at the WORLD_LEXER which supports Arabic.
Thanks,
Ron

Java installation under Linux

Hi
I've got a problem with the installation of somme Java Packages under Linux.
What must I do with the "*.jar" file? I wont to install the neu Open Xchange Server under SuSE 9.1, but there are somme Problems with the Java Packages!
Can someone help me???
Thanks a lot!!
Dambi

Hello Ishan,
The J2EE server is not starting because of the error in A. Please refer to note 965451 for solution.
The warnings in part B are insignificant. The startup framework has list with profile parameters and when a parameter is not in the list complains with warning. This warning doesn't mean that the parameter is wrong!
The jcontrol is the parent process of the server process and if the server process dies you will always get error message there.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA)

Vhost configuration for Adobe Media Server running under linux.

Please help me with Vhost configuration for Adobe Media Server running under linux.
I was running a media sharing website for which I wanted to use Adobe Media Server.
To use, AMS, I disabled the already installed Apache server and installed AMS along with the built in Apache server. I could successfully install AMS and could login to AMS Admin Console through my IP number.
My existing website, www.mydomain.com is having its contents located at:
/home/mydomain/public_html
(Directory created under the old version of Apache not bundled with AMS)
Users will be uploading their videos, which will get transcoded and will be delivered to the website visitors in the existing scenario.
To use this website with AMS, this is what I did:
I created a folder for my domain, www.mydomain.com as below
/opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
Copied Application.xml and Vhost.xml from /opt/adobe/ams/conf/_defaultRoot_/ and pasted them in /opt/adobe/ams/conf/_defaultRoot_/www.mydomain.com
In the Application.xml file there are 2 entries:
<Alias name="mydomain.com"></Alias>
<AppsDir>${/home/mydomain/public_html}</AppsDir>
Please help me with further steps to be completed:
Do I need to create a separate VirtualHost entry in the Apache installed with AMS?
If yes, can I specify already existing document root for my website (/home/mydomain/public_html) or do I need to create a separate folder under webroot/Apache ?
If yes to point 2 above, then do I need to copy all the existing contents from /home/mydomain/public_html to the newly created folder ?
I hope, I can serve all my static contents like html pages and php and media like video/audio. In that case do I need create alias to my Media/Alias folder or AMS will automatically start streaming when a video/audio is requested ?
What other steps do i need to complete?
Any help in this regard would be highly appreciated.
Thanks and Regards

Dear sir or madam,
Here is Letswin Technology, which specializes in global servers, web hosting, VPS, VPNj. If anything I can do for you, pls contact us!
Have a nice day!

ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
the Arial Font.
How can we correct this problem?
Regards
Udo
These are the files changed by Fontsolution Configuration Script:
uifont.ali
# uifont.ali provided in fontsolutions.tar for developer 9.0.2
# $Header: uifont.ali@@/main/22 \
# Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
# Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
# $
# $Revision: /main/22 $
# Copyright (c) Oracle Corporation 1994, 2002.
# All Rights Reserved.
# DESCRIPTION:
# Each line is of the form:
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
# <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
# The <Face> must be the name (string/identifier) of a font face. The
# <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
# value or a predefined identifier/string. For example, both US7ASCII
# and 1 are valid <CharSet> values, and refer to the same character set.
# The <Size> dimension must be an explicit size, in points.
# The following is a list of recognized names and their numeric
# equivalents:
# Styles Numeric value
# Plain 0
# Italic 1
# Oblique 2
# Underline 4
# Outline 8
# Shadow 16
# Inverted 32
# Overstrike 64
# Blink 128
# Weights Numeric value
# Ultralight 1
# Extralight 2
# Light 3
# Demilight 4
# Medium 5
# Demibold 6
# Bold 7
# Extrabold 8
# Ultrabold 9
# Widths Numeric value
# Ultradense 1
# Extradense 2
# Dense 3
# Semidense 4
# Normal 5
# Semiexpand 6
# Expand 7
# Extraexpand 8
# Ultraexpand 9
# Styles may be combined; you can use plus ("+") to delimit parts of a
# style. For example,
# Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
# are equivalent, and either one will map any Arial that has both Italic
# and Overstrike styles to a 12-point, bold, italic Helvetica font.
# All strings are case-insensitive in mapping. Font faces are likely to
# be case-sensitive on lookup, depending on the platform and surface, so
# care should be taken with names used on the right-hand side; but they
# will be mapped case-insensitively.
# See your platform documentation for a list of all supported character
# sets, and available fonts.
# BUGS:
# o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
#===============================================================
[ Global ] # Put mappings for all surfaces here.
# Mapping from MS Windows
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
#Modern = helvetica
#"MS Sans Serif" = helvetica
#"MS Serif" = times
#"Small Fonts" = helvetica
"Sadvocra" = helvetica..Oblique.Medium
"sAdC128d" = helvetica..Plain.Medium
"CarolinaBar-B39-25F2" = helvetica...Bold
#"IDAutomationSMICR" = helvetica
# Mapping from Macintosh
#"New Century Schlbk" = "new century schoolbook"
#"New York" = times
#geneva = helvetica
#===============================================================
[ Printer ] # Put mappings for all printers here.
#===============================================================
[ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#Arial = helvetica
#"Courier New" = courier
#"Times New Roman" = times
# MICR font
#helvetica=IDAutomationSMICR
#===============================================================
[ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
# Sample Kanji font mappings
...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
.....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
.....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
# Mapping from MS Windows
#Roman = palatino
#Script = "itc zapf chancery"
#FixedSys = courier
#System = helvetica
# Mapping from Macintosh
#"Avant Garde" = "itc avant garde gothic"
# Mapping from Motif display
#fixed = courier
#clean = times
#lucidatypewriter = courier
#lucidabright = times
#===============================================================
[ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
helvetica = univers
times = "cg times"
clean = "antique olv"
fixed = courier
lucida = univers
lucidabright = "cg times"
lucidatypewriter = courier
"new century schoolbook" = univers
terminal = "line printer"
#===============================================================
[ Display ] # Put mappings for all display surfaces here.
#===============================================================
[ Display:Motif ] # Put mappings for Motif displays here
# Fix for bug no 778937 DO NOT MOVE!
Roman.....sjis = lucida.....jeuc
Script.....sjis = lucidabright.....jeuc
FixedSys.....sjis = fixed.....jeuc
System.....sjis = lucida.....jeuc
.....sjis = .....jeuc
# Mapping from MS Windows
Roman = lucida
Script = lucidabright
FixedSys = fixed
System = lucida
# Mapping from Macintosh
"Avant Garde" = helvetica
"Bookman" = times
#===============================================================
[ Display:CM ] # Put mappings for all CM displays here.
# These are DEC-specific, and may need localization
*..Blink = Blinking
*..Inverted+Underline.Bold = ReverseBoldUnderline
*..Inverted+Underline. = UnderlineReverse
*..Underline.Bold = UnderlineBold
*..Inverted.Bold = ReverseBold
*...Bold = Bold
*..Underline = Underline
*..Inverted = Reverse
* = Plain # The font of last resort
# Oracle Report PDF sections
# Three new sections have been added:
# [ PDF ] - Used for font aliasing and Multibyte language support
# [ PDF:Embed ] - Used for Type 1 font embedding
# [ PDF:Subset ] - Used for True Type Font subsetting
[ PDF ]
# This example shows how to rename helvetica font to Courier font
# helvetica = Courier
# You can Alias specific styles of font as below
# helvetica.12..Bold.. = Courier.14....
# "Lucida Bright".12..Bold = "New Century Schoolbook"
# Support for Far Eastern Languages:
# PDF section can be additionally used to enable Multibyte language support
# built into Reports. To use this feature with Adobe (r) Acrobat (c), you
# need to install the Asian font pack available online at the Adobe web site.
# .....SJIS = "HeiseiKakuGo-W5-Acro"
# A Japanese report run with Shift-JIS character set is replaced to
# HeiseiKakuGo-W5-Acro CID font.
arial = Arial
"arial" =Arial
"arial narrow" = "Arial Narrow"
"courier new" = "Courier New"
tahoma = Tahoma
"microsoft sans serif" = "Microsoft Sans Serif"
"ms sans serif" = "MS Sans Serif"
"times new roman" = "Times New Roman"
[ PDF:Embed ]
# This example shows how to embed Type 1 helvetica font into the PDF file:
# helvetica = "helvetica.afm helvetica.pfa"
# You need to specify the .afm file before the .pfa file.
# The font files must exist in one of the folders specified in REPORTS_PATH.
[ PDF:Subset ]
# This example shows how to subset Arial True Type font into the PDF file:
# helvetica = "Arial.ttf"
# The True Type font files must exist in any one of the folders specified in
# REPORTS_PATH.
helvetica..Oblique.Medium = "Sadvocra.ttf"
helvetica..Plain.Medium = "Sadc128d.ttf"
helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
# NOTES ON PRECEDENCE OF PDF SECTIONS:
# If you have entries for a same font in many PDF sections, then Font
# Aliasing entry will take precedence over Font Embedding entry. Entries
# in Font Embedding will take precedence over the entries in Font Subsetting
# section.
# Generic entries for a font must follow more specific entries for the same
# font. For instance, if you want to subset helvetica Plain, helvetica Bold,
# helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
# [ PDF:Subset ]
# helvetica..Italic.Bold.. = "Arialbi.ttf"
# helvetica...Bold.. = "Arialb.ttf"
# helvetica..Italic... = "Ariali.ttf"
# helvetica..... = "Arial.ttf"
# If helvetica..... entry appears in the top of the list, all the styles of
# helvetica font in the layout will be subset as helvetica Plain font.
uiprint.txt
# This is the printer configuration file.
# The format for entries in this file is:
# <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
# The first field is the name of the printer. It is the name you give
# to lpq.
# The second field is the type of driver to be used for the printer.
# Currently, "PostScript" and "ASCII" are the only types of driver for
# printers supported for now. But in future we may be supporting
# drivers for other printer types.
# The third field is the version of the type of printer driver. It's 1
# or 2 for all PostScript printers; or 1 for ASCII printers.
# The fourth field is a long description of the printer. This will be
# presented to the user in the "Choose Printer" dialog window.
# The fifth field is the printer description file to be used. For
# PostScript printers it is the PPD file of the printer. (This field is
# currently unused for ASCII printers.)
# You can use default.ppd for the description file if you don't have a
# PPD file for the printer, but it's best to use the correct PPD file
# for the printer.
# You must fill in at least the first two fields (printer name and
# type). If the version is empty, it defaults to "1"; if the long name
# or description are empty, they will default to empty strings. A
# version of 1 or an empty long name is fine, but, for PostScript
# printers, you must fill in the description file name.
# You don't have to update this file to use any printer. The printer
# chooser interface let's you select a printer and driver at run time,
# as well as associate a printer description file to the printer. You
# should list all printers accessible to users here, however, to
# simplify selecting a printer.
# The first entry in this file will be used as the default printer, if
# no printer was selected in the operating system. (For Unix, the
# following environment variables will be used in turn to get the
# default printer's name:
# TK2_PRINTER
# ORACLE_PRINTER
# PRINTER
# For other platforms, see the Installation and User's Guide for your OS
# for information on setting the default printer.)
# WARNING: Do not define multiple entries for the same printer by the
# same name. Selecting a printer with multiple entries will always result
# in the first entry being selected. Instead, see if your OS allows you
# to create an alias for the printer, and use an alias for the second type.
# The following are examples; replace them with printers accessible from
# this machine.
# hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
# hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
# hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
# hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
# hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
# --- Note that the following two printers are aliases for the same
# --- physical printer, with different names for different types:
# tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
# tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
datap462.ppd
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% Copyright 1987-1992 Adobe Systems Incorporated.
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*% End of Copyright statement
*FormatVersion: "4.0"
*FileVersion: "3.1"
*PCFileName: "DATAP462.PPD"
*LanguageVersion: English
*Product: "(Dataproducts LZR 2665)"
*PSVersion: "(46.2) 1"
*ModelName: "Dataproducts LZR-2665"
*NickName: "Dataproducts LZR-2665 v46.2"
*% ==== Options and Constraints =====
*OpenGroup: InstallableOptions/Options Installed
OpenUI Option1/Optional Lower Tray: Boolean
*DefaultOption1: False
*Option1 True/Installed: ""
*Option1 False/Not Installed: ""
CloseUI: Option1
*CloseGroup: InstallableOptions
UIConstraints: Option1 False *InputSlot Lower
*% General Information and Defaults ===============
*ColorDevice: False
*DefaultColorSpace: Gray
*FreeVM: "178744"
*LanguageLevel: "1"
*VariablePaperSize: False
*FileSystem: False
*Throughput: "26"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
dup % potential password
statusdict /checkpassword get exec not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict /exitserver get exec
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
*End
*DefaultResolution: 300dpi
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
( ) cvs print (dpi) = flush
restore
*End
*% Halftone Information ===============
*ScreenFreq: "50.0"
*ScreenAngle: "54.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "
{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*End
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter: "statusdict /lettertray get exec letterR"
*PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
*PageSize Legal: "statusdict /legaltray get exec"
*PageSize Ledger: "statusdict /ledgertray get exec"
*PageSize Statement: "statusdict /statementtray get exec"
*PageSize Tabloid: "statusdict /11x17tray get exec"
*PageSize A3: "statusdict /a3tray get exec"
*PageSize A4: "statusdict /a4tray get exec a4R"
*PageSize A4.Transverse: "statusdict /a4tray get exec a4"
*PageSize A5: "statusdict /a5tray get exec"
*PageSize B4: "statusdict /b4tray get exec"
*PageSize B5: "statusdict /b5tray get exec b5R"
*PageSize B5.Transverse: "statusdict /b5tray get exec b5"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter: "letterR"
*PageRegion Letter.Transverse: "letter"
*PageRegion Legal: "legal"
*PageRegion Ledger: "ledger"
*PageRegion Tabloid: "11x17"
*PageRegion A3: "a3"
*PageRegion A4: "a4R"
*PageRegion A4.Transverse: "a4"
*PageRegion A5: "a5"
*PageRegion B4: "b4"
*PageRegion B5: "b5R"
*PageRegion B5.Transverse: "b5"
*PageRegion Statement: "statement"
*CloseUI: *PageRegion
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: Letter
*ImageableArea Letter: "20 16 591 775 "
*ImageableArea Letter.Transverse: "18 19 593 773 "
*ImageableArea Legal: "18 19 593 990 "
*ImageableArea Ledger: "18 16 1205 775 "
*ImageableArea Tabloid: "16 19 775 1206 "
*ImageableArea A3: "18 21 823 1170 "
*ImageableArea A4: "18 18 576 823 "
*ImageableArea A4.Transverse: "18 19 577 823 "
*ImageableArea A5: "18 19 401 577 "
*ImageableArea B4: "19 15 709 1017 "
*ImageableArea B5: "20 19 495 709 "
*ImageableArea B5.Transverse: "20 19 495 709 "
*ImageableArea Statement: "22 19 374 594 "
*?ImageableArea: "
save
/cvp {( ) cvs print ( ) print } bind def
/upperright {10000 mul floor 10000 div} bind def
/lowerleft {10000 mul ceiling 10000 div} bind def
newpath clippath pathbbox
4 -2 roll exch 2 {lowerleft cvp} repeat
exch 2 {upperright cvp} repeat flush
restore
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: Letter
*PaperDimension Letter: "612 792"
*PaperDimension Letter.Transverse: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension Ledger: "1224 792"
*PaperDimension Tabloid: "792 1224"
*PaperDimension A3: "842 1191"
*PaperDimension A4: "595 842"
*PaperDimension A4.Transverse: "595 842"
*PaperDimension A5: "420 595"
*PaperDimension B4: "729 1032"
*PaperDimension B5: "516 729"
*PaperDimension B5.Transverse: "516 729"
*PaperDimension Statement: "396 612"
*RequiresPageRegion All: True
*OpenUI *InputSlot: PickOne
*OrderDependency: 20 AnySetup *InputSlot
*DefaultInputSlot: Upper
*InputSlot Upper: "0 statusdict /setpapertray get exec"
*InputSlot Lower: "1 statusdict /setpapertray get exec"
*?InputSlot: "
save
[ (Upper) (Lower) ] statusdict /papertray get exec
(get exec) stopped ( pop pop (Unknown)} if = flush
restore
*End
*CloseUI: *InputSlot
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict /manualfeed true put"
*ManualFeed False: "statusdict /manualfeed false put"
*?ManualFeed: "
save
statusdict /manualfeed get {(True)}{(False)}ifelse = flush
restore
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Reverse
*% Font Information =====================
*% This datap462.ppd is provided by fontsolutions.tar
*DefaultFont: Courier
*Font ArialMT: Standard "(001.004)" Standard ROM
*Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldMT: Standard "(001.004)" Standard ROM
*Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font ArialNarrow: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
*Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
*Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
*Font CourierNewMT: Standard "(001.004)" Standard ROM
*Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
*Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
*Font Courier: Standard "(001.004)" Standard ROM
*Font Courier-Bold: Standard "(001.001)" Standard ROM
*Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
*Font Courier-Oblique: Standard "(001.001)" Standard ROM
*Font Helvetica: Standard "(001.001)" Standard ROM
*Font Helvetica-Bold: Standard "(001.001)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
*Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
*Font Symbol: Special "(001.001)" Special ROM
*Font Tahoma: Standard "(001.001)" Standard ROM
*Font Tahoma-Bold: Standard "(001.001)" Standard ROM
*Font Times-Bold: Standard "(001.001)" Standard ROM
*Font Times-BoldItalic: Standard "(001.001)" Standard ROM
*Font Times-Italic: Standard "(001.001)" Standard ROM
*Font Times-Roman: Standard "(001.001)" Standard ROM
*Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
*Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
*?FontQuery: "
save
/str 100 string dup 0 (fonts/) putinterval def
count 1 gt
exch dup str 6 94 getinterval cvs
(/) print print (:) print
FontDirectory exch known
{(Yes)}{(No)} ifelse =
{exit} ifelse
}bind loop
(*) = flush
restore
*End
*?FontList: "
FontDirectory { pop == } bind forall flush
(*) = flush
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: BD check"
*Status: "PrinterError: Paper jam"
*Status: "PrinterError: Replace toner bag"
*Status: "PrinterError: Warming up"
*Status: "PrinterError: Timing error"
*Status: "PrinterError: Fuser check"
*Status: "PrinterError: Cover opened"
*Status: "PrinterError: Toner empty"
*Status: "PrinterError: Empty & reset output bin(s)"
*Status: "PrinterError: Sorter or jogger error"
*Status: "PrinterError: Scanner check"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*Source: "Centronics"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "BD check"
*PrinterError: "Paper jam"
*PrinterError: "Replace toner bag"
*PrinterError: "Warming up"
*PrinterError: "Timing error"
*PrinterError: "Fuser check"
*PrinterError: "Cover opened"
*PrinterError: "Toner empty"
*PrinterError: "Empty & reset output bin(s)"
*PrinterError: "Sorter or jogger error"
*PrinterError: "Scanner check"
*%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
*% For 53 lpi / 300 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
*% For "Dataproducts LZR 2665" version 46.2
*% Produced by "GETapd.ps" version 2.0 edit 47
*% Converted to meet 4.0 specification
*% Last Edit Date: Sep 15 1992
*% The byte count of this file should be exactly 011228 or 011572
*% depending on the filesystem it resides in.
*% end of PPD file for Dataproducts LZR 2665

If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
Pete

Too many resources used under Linux

I have tested sun jvm under linux red-dat 6.2
and 7.1 (listed by Sun as official platform supported)
The JVM I test was from 1.3.0 to the 1.4.1
I have written a simple application server that
runs java application starting a new JVM.
When the java application runs (with the -server or
-hotspot option) I see that 10 java process are
istantiated. (10 JVM)
This is a real problem because for 4 users that runs 4
applications there are 40 JVM running
(each one allocates about 20 Mb of memory)
and the system became very slow.
With the -classic option the situation is better: only 1 JVM
for application is started, (the application is the same, I
have change only the -server option with -classic)
but JVM seems to be less stable: I have a lot of segmentation
fault errors. (with core dump)
With the new distribution of Sun JVM (1.4.1) the -classic option
is no longer supported.
Does anyone knows if is there a way to have only one JVM
for application? (-classic does not works well)
Is there others JVM for linux more stable instead of the Sun one?
PS: I have tested the same code under win/2000 using JVM 1.3.1_03
and the -classic option. All goes well (the same application):
I haver only 1 thread for application without jvm runtime error.
Now my doubt is: does Sun belive in the Linux Word?
JVM for Windows is much more stable!!!
Thank you in advanced and best regards.

I am assuming that you believe that there are 10 processes because that is what ps shows. However on Linux, each thread in a java program shows up in ps as a separate process. The memory for each "ps process" corresponding to a java thread is shared among all the threads of the JVM. Therefore if you see 10 processes with 20MB each you are not using 200MB, just 20.
If you are running 4 JVMs then you would be using 40MB not 800 as shown in ps.
I think Sun's JVM for linux is quite good (as I use it every day). If you need to run so many JVMs you should invest in more memory.
BTW, How much memory is installed in your system?

Cd printing under Linux (Pixma MG5350)

Hi all,
I've bought a Canon Pixma MG5350 just a few weeks ago.
It works great but this week I've tried to print with the CD-tray.
I have made a nice label using Glabels, and set the printing configuration as followed:
Paper tray: CD tray
Paper size: CD 5-inch
Resolution: 600x600 DPI high cd
Then the printer indicated that I need to push the tray in the slot and press OK. After that it will ask the same thing again, again and again without doing much. I've tried every single adjustment if it comes to inserting the cd-tray but the machine just wont insert it.
Hopefully some of you can give me advise on this one. Probably I am overlooking something but don't know what. Can it be that this feature is not working under Linux? (hope it will)
Operating details:
Kubuntu 13.04 64bit
Printer driver: Canon Pixma MG5300 - CUPS+Gutenprint v5.2.9
Kind regards,
Jurgen

Great, thanks for the quick reply. I will keep this post open for now and at the same time fill in a form on the canon site for Europe. If I understand what is going wrong I will post it here as well.
jurgen

Question about labview under linux and the using of CIN....

i have a problem with making Code Interface Node (CIN) with labview under LINUX... my goal is to make a CIN that can uses I2C interface (look to libk8000 from hihihihi), but it just work when i'm running it as ROOT ... is there a way to call the cin like as root.... thanks

Hello Mister Pouf,
Can you please explain more your problem? And give more details about it?
Have you receive error message?
Best Regards,
Sanaa TAZI
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

BUG: background image under Linux

Hi,
This is actually two bugs...
1) When you select a background image under Linux (I'm using CentOS, 100% comatable with Red Hed), and set it to Stretch, the image gets mangled. Probably a byte allaignment problem.
2) When you change the background image with the Position set to Center from the program, LabVIEW often simply disapears. This doesn't happen when the Position is set to Tile, I haven't tried Stretch, because of point 1). It doesn't always happen, it seems to be related to the window origin. The error log says something like "DWarn ... picture Width and Height not matching". I'll try to attach the report, but it's on another system.
I only tested with 3 similar pictures (png's). It might not happen with all pictures, although the used pictures are not special in any way.
Regards,
Wiebe.

Hi Wiebe,
Thanks for your post! Would it be possible to post screenshots of what you have pointed out in 1). Would it be possible to post the error log file for point 2) as well as a step-by-step instructions on how to reproduce this? Once I have this, I will be able to submit this to R&D for further investigation. Thanks so much for your help in making LabVIEW a better product!
Best regards,
Steven

Oracle 9i Installation under Linux

I am trying to Install Oracle 9.0.1 under Linux.
During the Installation Process it has given some
error as follows..
ERROR in invoking target install of makefile
/home/oracle/OraHome1/plsql/lib/ins_plsql.mk
and also for sqlplus and ldap etc, etc.
I ignored those and after 100% completion
its going into a window and saying Configuring NetAssistant and its going into a loop somewhere because its not coming out from that loop even after several hours.
Can you suggest something.
Thanks and Regards.
Keshav

Check the url of SuSe :
http://www.suse.com/us/support/oracle/index.html
I guess you're trying to install on SuSE 7.3. Is that right ?

Oracle 9iDS under Linux

I have a problem regarding Oracle 9iDS under Linux AS 2.1.
I have installed Oracle 9iDS under Linux AS 2.1.
When i run Form builder the forms builder runs in light blue. It is its deault behaviour or i have mede any mistake. Can i change this colour scheme?
My second question is regarding to Jinitator.
Tell me how to install and configure it.
Many Thanks in advance.
Regards,
M.Usman Latif

which browser you have configured..use netscape.., it will check for the jinitator, if it doesn't get it will go to sun java and down load for you..
default blue colour is right no issues..
good luck..

INTERMEDIA TEXT - INSO FILTER의 사용방법과 한글 설정

제품 : ORACLE SERVER
작성날짜 : 2003-02-05
INTERMEDIA TEXT - INSO FILTER의 사용방법과 한글 설정
====================================================
Purpose
Intermedia text에서 INSO filter를 사용할 때 한글을 설정하여 이용하는
방법을 알아보자.
Explanation
INSO Filter 에는 자체적인 속성이 없기 때문에, 한글 환경을 설정하기
위해서는 ‘ctxhx’에 적절한 입력 값을 제공하는 새로운 script 를 만
들어야 한다. 그 방법은 다음 두 과정을 거쳐야 한다.
첫번째, 새로운 shell script 작성 : ctxhx 에 원하는 매개 변수 설정
두번째, INSO_FILTER 대신 USER_FILTER 를 사용하여 작성한 script 를
command로 설정
다음은 INSO filter 를 이용하여 한글 문서를 검색하는 과정을 보여준다 .
데모 환경은 다음과 같다 .
* KOREAN_LEXER 사용
* Acrobab PDF, Word97, PPT97, Excel, Html 문서 검색
* 한글 검색을 위해 , INSO Filter 를 변형한 USER_FILTER 사용
1. 한글 검색 용 INSO Filter 생성
다음은 INSO Filter‘ctxhx’를 이용하여 한글 문서를 필터링하도록
'autofilt'의 내용이다. 이 파일은 실행 권한이 주어져야 한다.
$ cd $ORACLE_HOME/ctx/bin
$ vi autofilt
#!/bin/sh
$ORACLE_HOME/ctx/bin/ctxhx $1 $2 hangeul koreanhangul T
$ chmod 777 autofilt
* NT의 경우
메모장 등으로 oracle_home\ctx\bin directory에 autofilt.bat 라는
이름의 화일을 다음과 같이 생성한다.
oracle_home 이 E:\ora815 인 경우
set oracle_home=E:\ORA815
E:\ora815\ctx\bin\ctxhx.exe %1 %2 hangeul koreanhangul T
2. 테이블 생성
SQL> create table mydocs (
2 docid number primary key,
3 title varchar2(256),
4 fname varchar2(30),
5 document blob );
3. Pro*c 나 sql*loader등을 이용하여 long raw 또는 blob type에
file을 입력한다.
[예제] sql*loader를 이용한 방법
sql*loader를 이용하여 , ‘mydocs’ 테이블에 있는 BLOB 에 5개의 문서를
입력하기 위한 과정을 위해 쓰이는 file들은 다음과 같다.
* controlfile : mydocs.ctl
INFILE 'mydocs.dat'
FIELDS TERMINATED BY ";"
optionally enclosed by '"'
(docid, title, fname,
ext_fname filler char(40),
document lobfile(ext_fname)
terminated by eof )
* datafile : mydocs.dat
0; ConText Cartridge Datasheet ; context.pdf ; context.pdf
1; Image/Vir Cartridge 소개 ; img_vir.ppt ; img_vir.ppt
2; Oracle Video Server 소개 ; ovs 소개 .doc ; ovs 소개 .doc
관리 시스템 ; kms.html ; kms.html
4; Oracle8i New Feature ; oracle8i.xls ; oracle8i.xls
* sql*loader의 실행
$ sqlldr userid=ctxdemo/ctxdemo control=mydocs.ctl data=mydocs.dat direct=no
4. Indexing Object 의 생성
* 한글 검색을 위해 KOREAN_LEXER preference 를 사용
* autofilt 를 필터링에 쓰이는 명령어로 하는 USER_FILTER preference 사용
SQL> begin
2 ctx_ddl.create_preference('MYDOCS_LEXER', 'KOREAN_LEXER');
3 ctx_ddl.create_preference('MYDOCS_FILTER', 'USER_FILTER');
4 ctx_ddl.set_attribute('MYDOCS_FILTER', 'command', 'autofilt');
5 end;
6 /
PL/SQL procedure successfully completed.
* NT인 경우 아래와 같이 attribute를 지정해야 한다.
ctx_ddl.set_attribute('MYDOCS_FILTER', 'command', 'autofilt.bat');
이제 위에서 정의된 indexing object 들을 이용하여 ,
mydocs 의 document field 에 Text index를 생성하는 과정을 보여준다 .
SQL> create index mydocs_document_index
2 on mydocs(document) indextype is ctxsys.context
3 parameters('lexer mydocs_lexer
4 filter mydocs_filter');
Index created.
5. 데이타 조회
* '비디오'와 '서버'를 포함한 문서의 검색 결과를 보여 준다 .
SQL> select ctxsys.score(0) scr, docid, title, fname
2 from mydocs
3 where ctxsys.contains(mydocs.document, '비디오 and 서버 ',0) > 0 ;
SCR DOCID TITLE FNAME
38 2 Oracle Video Server ovs소개.doc
1 row selected.
* BLOB 에 들어 있는 Word97 문서를 필터링한 결과를 출력하는 과정을 보여준다.
SQL> create table
2 query_id number,
3 document clob);
Table created.
SQL> exec CTX_DOC.FILTER('mydocs_document_index', 2, 'filtertab', 0);
PL/SQL procedure successfully completed.
SQL> select document from filtertab;
DOCUMENT
Oracle Video Server 소개
.....

Rman of database under Linux from Windows server

Dear colleagues! I need some help.
I have Oracle database 10.2.0.1, which works under Linux CentOS. I've just set up rman, to backup this database to local linux partition. Now, i want to adjust rman, so it starts from Windows 2003 ( i've already install Oracle 10.2.0.1 client for Wondows 32-bit) server to backup this database to local Windows folder.Could you please answer, is it possible at all?
When i try to perform rman from Windows manually i got this errors:
channel t1: starting piece 1 at 29-APR-10
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 04/29/2010 03:07:32
ORA-19504: failed to create file "/u02/app/oracle/product/10.2.0/db_1/dbs/c:123
bak"
ORA-27038: created file already exists
Additional information: 1

1. You can run the backup from windows server 2003 which take the RMAN backup of your linux server. But this backup can only stored into your linux server.
2. You can't store the backup set of linux server into windows server.
Regards
Asif Kabir
-- mark your helpful post as correct/helpful.

816 installer error under linux 7.1

Hi,
i tried to install oracle 816 under linux 7.1 . During the time of linking makefile. The following error occur :
Error in invoking target install of makefile /oraHome/network/lib/ins_net_client.mk
I have already added the 6.2 backward compatable libs(compat-eqcs,compat-glibc and compat-libs) and
export LD_ASSUME_KERNEL=2.2.5
execute the script
/usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
It still doesnt work !!! Why ???
CAN ANY BODY HELP !!! THANK A LOTS !!!
null

Read the other threads more carefully next time.
Alex Voitov posted this ftp site:
ftp://ftp.kernel.org/pub/software/libs/glibc/hjl/sdk/2.1/
click README.Oracle8i.
I also did what you did, but that was not enough, so I tried following the instructions in the README file mentioned above, and then I got oracle installed in Redhat 7.1 with no problems.
After you install Oracle, you may also want to follow the instructions below.
Posted by Kamal:
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>
Oracle Version 8.1.7
Linux Redhat 7.0
While installing Oracle you may encounter the error 'not able to connect to oracle'
during database creation. This is due to glibc package problem.
Please do the following
1. Install the compat-glibc RPM for 2.1.3.x
(This is on the Redhat 7.0 CDs)
2. cd to the directory where compat-glibc installed the files (for me it's
/usr/i386-glibc21-linux/lib).
3. Copy the following files to $ORACLE_HOME/lib:
libc-2.1.3.so
libpthread.so
libdl.so
ld-linux.so.2
For me, several of these are symbolic links, so you'll need to copy the target of the
symbolic link and rename it to the link name when you copy it to $ORACLE_HOME/lib.
For example, if ls -l shows:
ld-linux.so.2 -> ld-2.1.3.so
libc-2.1.3.so
libdl.so -> libdl.so.2
libpthread.so -> libpthread.so.0
Then you will:
cp ld-2.1.3.so $ORACLE_HOME/lib/ld-linux.so.2
cp libc-2.1.3.so $ORACLE_HOME/lib
cp libdl.so.2 $ORACLE_HOME/lib/libdl.so
cp libpthread.so.0 $ORACLE_HOME/lib/libpthread.so
4. Create a file in $ORACLE_HOME/lib called libc.so with the following contents (as a
single line):
GROUP ( /lib/libc-2.1.3.so /lib/ld-linux.so.2 /libc_nonshared.a )
Substitute the value of $ORACLE_HOME for and the location of the compat-glibc directory
for . For example:
My $ORACLE_HOME is:
/u01/app/oracle/product/8.1.7
and my compat-glibc directory is:
/usr/i386-glibc21-linux/lib
so the GROUP line looks like this for me:
GROUP (/u01/app/oracle/product/8.1.7/lib/libc-2.1.3.so
/u01/app/oracle/product/8.1.7/lib/ld-linux.so.2
/usr/i386-glibc21-linux/lib/libc_nonshared.a)
This is all one line.
5. cd $ORACLE_HOME/bin
6. Run the following command from the UNIX prompt:
relink all
All of the Oracle software, including the assitants, will work fine now.
I have used this technique for RedHat 7.0 with the 2.2.16 kernel.
Thanks to Richard Rankin for this simple and reliable method
Regards
Kamal
<HR></BLOCKQUOTE>

Regarding Inso filter technology(Context Cartdridge) under Linux

Similar Messages

Maybe you are looking for