Regarding install the Ps
Respected sir i am vengo and i need help and how to get Ps in my system i need 499/INR scheme per month, regarding this i send the mail to the adobe they told me that somebody call you from india and after that you may get the 499 scheme but still now i did not get any call from the respective person... kind ly help me to get Ps to me sir.. Thank you so much sir..!
Cloud Plans https://creative.adobe.com/plans
-Special Photography Plan includes Photoshop & Lightroom & Bridge & Mobile Lightroom
-Special Photography Plan includes 2Gig of Cloud storage (not the 20Gig of the full plan)
-http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
-http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
-and subscription terms http://www.adobe.com/misc/subscription_terms.html
-what is in the entire Cloud http://www.adobe.com/creativecloud/catalog/desktop.html
-http://www.adobe.com/products/catalog/mobile._sl_id-contentfilter_sl_catalog_sl_mobiledevi ces.html
If you are not able to purchase directly, Adobe Resellers http://adobedealreg.force.com/PartnerSearch?lang=en
Similar Messages
-
Are There anyone,that obtained successfully to install the OEM in the OEL4?
Hi !
Are There anyone,that obtained successfully to install the OEM in the OEL4?
I made this question becouse I cound't find some rpm's packages as follows:
Checking for compat-libstdc++-296-2.96-132.7.2; found Not found. Failed <<<<
Checking for libstdc++devel-3.4.3-22.1; found Not found. Failed <<<<
Checking for openmotif-21-2.1.30-11; found openmotif-2.2.3-10.1.el4. Failed <<<<
Checking for sysstat-5.0.5-1; found Not found. Failed <<<<
If someone has this packages, please send me a message or reply this tread.
Best Regards.Install the following “rpm” from the EL4 cd#3
mount /media/cdrecorder/
rpm -ivh /media/cdrecorder/Enterprise/RPMS/sysstat-5.0.5-11.rhel4.i386.rpm
rpm -ivh /media/cdrecorder/Enterprise/RPMS/compat-libstdc++-296-2.96-132.7.2.i386.rpm
rpm -ivh /media/cdrecorder/Enterprise/RPMS/libaio-0.3.105-2.i386.rpm
Even then you will have the following error:
compat-libstdc++-296-2.96-132.7.2 not found
libstdc++devel-3.4.3-22.1 not found
openmotif-21-2.1.30-11 not found
It is acceptable to check off on "User Verified" and proceed with the installation.
Check out metalink note:343364.1 for complete details on this.
Message was edited by:
Steeve -
I am trying to install the new iTunes and I keep geting the error message "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services". HELP
Hey schouten53,
Thanks for the question. I understand you are experiencing issues with the latest iTunes update. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed).
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Everytime I try to install the new Itunes It fails. I've tried downloading the set up twice with the same effect.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Error while installing the NerWeaver Platform
Error While installing the NetWeaver Instance
Posted: Nov 22, 2004 2:37 PM Reply E-mail this post
When I am installing 'SAP NetWeaver Suite'the below error came, can someone help me out on this below error?
MOS-01011 'C:\usr\sap\BWI\SYS\exe\run/sapstartsrv.exe' returned with '-1'.
The J2EE server is up unrunning @ the installing the Netweaver ABAP Instance I got this error.
For the user BWI it has the Administrator previlages i checked so many time but I am unable to get it.
Please help me out the error.Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek -
Apple support had not responded to my requests for clarification. The update corrupted both ITunes and Office Outlook mobileme. The error message when I tried to start up I Tunes was Error 7 Windows 193. I un installed I Tunes and re installed the latest ver and encountered the same error message. I finally did a system restore. Was this a one time problem or is the update bad. In over 30 years I'd never had a problem with any Apple update.
Hi Lutacrew,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
How to install the JDI and what re the prerequisites
Hi All,
Anybody tell me ,
AS iam new to the SAP NetWeaver
How to install the JDI,
I have got one document in sdn . It has given the prerequisite as.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine
Should i install all the above component? or any one of the components, if need to be, can u anbody tell me how to install , where i will get the help.
How i need to setup the JDI.
We are working on Webdynpro, and VC, some of the portal components development.
Installing the DTR alone is enough to move forward, or JDI is required to setup?
Please repsond me.
Regards
VijayHi Krishna thanks for the reply,
Our Current Portal Version is
NetWeaver 2004s SP 11.
My question, should we need to install all these following components before we setup the JDI.
Complete installation of DI (CMS, DTR, and CBS) on SAP J2EE Engine.
or
As per your reply , my understanding is , By installing the JDI , i will be getting all the above components.
BCZ in that document it is gving clearly that, the above components are prerequisites for installing the JDI.
Can u tell me where i will get that service packs in the service market place.
Regards
Vijay -
Basic questions regarding installing Forefront EP Client 2010 on Windows 2012 R2
Hi,
We have a handful of servers and client machines (although these always seem to be expanding) and as such have previously just installed the Forefront Endpoint 2010 Client manually onto the various endpoints with updates being pushed via WSUS from a Windows
2008R2 machine, without running to a full installation of SCCM or the Forefront Endpoint Server. However, trying to install the FEP 2010 client directly onto new Windows 2012R2 servers result in a "This OS is not supported" error.
After checking some articles it appears that FEP 2010 might well be supported on Win 2012R2 (and Windows 8), but only if installed via SCCM. Is this correct?
We do have access to SCCM 2012, but again I have shied away from this. I had hoped that maybe the SCCM Endpoint client could also be installed manually once more, but trying to install this on a Windows 2012R2 machine results in a "Windows compatibility
mode is not supported by this program" error.
Am I barking up the wrong tree and will I now have to finally learn and install SCCM? If so I take it that I can update my 2008R2 WSUS server to firstly Win 2012RS WSUS, then add SCCM 2012?
Cheers
ChrisHi Joyce,
Thanks for the feedback.
Hi,
>>After checking some articles it appears that FEP 2010 might well be supported on Win 2012R2 (and Windows 8), but only if installed via SCCM. Is this correct?
According to the blog below, Forefront Endpoint Protection 2010 with Update Rollup 1
is supported on Windows Server 2012 R2.
http://blogs.technet.com/b/configmgrteam/archive/2013/09/16/support-questions-about-win-8.1-and-winsvr-2012-r2-for-configmgr-and-endpoint-protection.aspx
Please make sure you are running FEP 2010 update rollup 1. You could get it from the following link.
http://support2.microsoft.com/kb/2907566/en-us
Thanks for the feedback. I should have said that I have indeed tried this. From the initial link you posted I found the "Update Rollup 1 for Forefront Endpoint Protection 2010" (http://support2.microsoft.com/kb/2551095/en-us), however, this update
itself apparently requires a prerequisite. Whist I have tried to install the prerequisite (http://support2.microsoft.com/kb/2554364/en-us) and the Forefront Update Rollup 1 directly onto a a Windows 2012 R2 machine, I end up with errors:
Installing the Prerequisite result in a "Error code: 1642" in the log file. Have have tried to chase this error, but have not spent too much time digging as yet, but this appears to be more to do with the FEP server than the client.
Installing with the FEP Update Rollup (obviously without the prerequisite), give us three folders (FepExt, FepReport and FepUx), none of which seem to be the client per se
>>Ah, the later problem of trying to install a client from SCCM 2012 onto Windows 2012R2 maybe because I have been using SCCM 2012 SP1, and not SCCM 2012R2??
In SCCM 2012, Endpoint Protection 2012 is integrated so you cannot install FEP 2010 in it.
Best Regards,
Joyce
No no, What I meant was that I had hoped that I could install the client contained within SCCM 2012 R2 installation material manually onto a vanilla Windows 2012 R2 box (which is what I'm trying to do), in the same way that I could install the FEP 2010 on
previous Windows OS. The ISO that I have currently from our systems team is that of SCCM 2012 SP1, not SCCM 2012 R2, and the client within the SP1 package does not install in Windows 2012 R2. I'm tyring to get hold of the SCCM 2012 R2 ISO now, which (from
what I read) should allow me to manually install the client.
I may well play with SCCM later, but is a little over kill for our estate (read 10's of servers and clients, rather than 1000's), however, we should have a campus licence for SCCM.
Regards
Chris -
Unable to start EBS DB after the Server Crash. Error in installing the Required RPM.
Hi , Hussein ( As most of the Time It is Only you here who comes to the rescue or give Usefull inputs. I am sorry if i mistaken, no Pan intended for Other Experts)
I 've also posted this issue here but got no response. https://forums.oracle.com/thread/2590497
Badly require your inputs and suggestions on the Following Issue. , Really Appreciate the suggestions.
I need to Install the sabayon-apply rpm which could fix the issue after the Server Crash but unable to install it.
Please see the Brief of the Issue.
I got stuck up in installing the rpm after the server(Red Hat Enterprise Linux Server release 6.0 (Santiago) x86_64 GNU/Linux) got
crashed Eventhough I am able to start it in Xwindows but not able to run or start EBS database along with many other programmes. Also The
VirtualBox machine installed on it 've No issue, they work fine But the host OS is not fine. as there are lots of
errors in .xsession-errors. which i 've pasted below. And Unable to Install the sabayon-apply rpm that could have fix the Issue.
I would highly Appreciate if anyone could drop few hints and suggestions on this Issue as this is really Urgently Important for me.
Please see the following Brief of the Issue.
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
While installing the rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps as it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
After That I could Not Install any rpm with yum or rpm command as getting the Same Errors.
while trying to install individual rpm am getting the followig Errors
[root@ebs Packages]# rpm -ivh libX11*
error: libX11-1.3-2.el6.i686.rpm: Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
error: libX11-1.3-2.el6.i686.rpm cannot be installed
[root@ebs Packages]# rpm --checksig gtk2*
gtk2-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-devel-docs-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.i686.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-engines-2.18.4-5.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
gtk2-immodule-xim-2.18.9-4.el6.x86_64.rpm: RSA SHA1 (MD5) PGP MD5 NOT OK
For that I tried to import the RPM GPG Key But still faced the same errors
[root@ebs yum.repos.d]# wget http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 -O /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle Key fingerprint = 4214 4123 FECF
C55B 9086 313D 72F9 7B74 EC55 1F03
--2013-10-08 00:04:56-- http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6
Resolving public-yum.oracle.com... 202.159.216.177, 202.159.216.171
Connecting to public-yum.oracle.com|202.159.216.177|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1011 [text/plain]
Saving to: “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
FINISHED --2013-10-08 00:05:06--
Downloaded: 6 files, 55K in 2.0s (27.7 KB/s)
100%[===========================================================================================================================================================>]
1,011 --.-K/s in 0s
2013-10-08 00:04:56 (155 MB/s) - “/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle”
saved [1011/1011]
Than i run this command
[root@ebs yum.repos.d]# rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle ----it Returns with no output
[root@ebs yum.repos.d]#
[root@ebs log]# rpm -q gpg-pubkey-ec551f03-4c2d256a
gpg-pubkey-ec551f03-4c2d256a
But still I can't install the rpms, got the same Errors. please see the following
[root@ebs yum.repos.d]# yum install firefox*
Loaded plugins: refresh-packagekit, rhnplugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Downloading Packages:
(1/2): firefox-17.0.9-1.0.1.el6_4.x86_64.rpm
| 25 MB 03:42
(2/2): xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
| 14 MB 02:03
Total
117 kB/s | 39 MB 05:46
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD
Problem opening package xulrunner-17.0.9-1.0.1.el6_4.x86_64.rpm
[root@ebs log]# rpm -qf `which gpg`
error: rpmdbNextIterator: skipping h# 455 Header V3 RSA/SHA256
Signature, key ID fd431d51: BAD
[root@ebs log]# gpg --list-keys
/root/.gnupg/pubring.gpg
pub 1024D/11F63C51 2002-02-28
uid Jamie Cameron <[email protected]>
sub 1024g/1B24BE83 2002-02-28
pub 2048D/671DF296 2013-10-08
uid oracle
sub 2048g/9FE459CE 2013-10-08
pub 1024R/F3A5AC78 2013-10-08
uid oracle (no comment) <[email protected]>
sub 1024R/6DC65985 2013-10-08
pub 1024R/78F6C944 2013-10-08
uid root user (Example GPG Key Signature For RPM
Packages) <[email protected]>
sub 1024R/77C97AFF 2013-10-08
[root@ebs log]# rpm -qi 'gpg-pubkey-*'
Name : gpg-pubkey Relocations: (not relocatable)
Version : ec551f03 Vendor: (none)
Release : 4c2d256a Build Date: Wed 09 Oct
2013 01:09:10 AM IST
Install Date: Wed 09 Oct 2013 01:09:10 AM IST Build Host: localhost
Group : Public Keys Source RPM: (none)
Size : 0 License: pubkey
Signature : (none)
Summary : gpg(Oracle OSS group (Open Source Software group)
<[email protected]>)
Description :
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: rpm-4.8.0 (NSS-3)
mQENBEwtJWoBCACpiY2rGA6T0ceBi92X88/QclytVBjtDRohOVzs3pmIPh3ULqsW
G323nmyKbKQBBSjh9OnuO9Y09VG8mzr/w9YV0Ix4cI9/HDTERZ2+TR5u+VNn5J5h
yvwQSN/FEK6oH2+mz7O0yUNleN7UltR4MOEkHIoAhIvv+1AQQKN3OM8oalz+3gv/
zz9rAoQczQzT7QWOtBrsRMZgBrKXY/TpJrpVSO3Hx8CnbhKGtLxCCrxZ5v7hh1ht
3CRAr2+h5bDA9KP6vBZWKEs7NgcvtZFDY6EJc7AoApr3phX9hHE2+snTxe82DkFT
uA69C8wLyjPCoSy+tcaCqJKOZelNy9RN/WKRABEBAAG0RE9yYWNsZSBPU1MgZ3Jv
dXAgKE9wZW4gU291cmNlIFNvZnR3YXJlIGdyb3VwKSA8YnVpbGRAb3NzLm9yYWNs
ZS5jb20+iQE8BBMBAgAmBQJMLSVqAhsDBQkWjmoABgsJCAcDAgQVAggDBBYCAwEC
HgECF4AACgkQcvl7dOxVHwMiNAf/cD8R74fCBeQsAYid5slIz7CG8xEOBUTDNEJT
p/owtzr7m7Ydp1txNBOkVeVkUP8czX5EldcmoxA4kCCyHhnxmpJnOt52Fy5ZRnYh
Ll5gYdpJpXGVScB7fnlh3rJAaesSTacVFC5MKIYPZBiTo9soSXMLNcG8WqHPasdd
AblC4t5BTDNYlX1RiPeP6m5egHnnxyAXsis8fqIZY0RC9hERxWQ6hdDAX0tJXY8F
88HDUozvo8jqTlg/5GZcfqcbUjjMUJQ5cBtH3adCthMycdPpPXWJQBuzMIdFJ03u
YuQ3XrKxBkOLips+OZuWNVZzrPOHsenb49aX4yQsLVc2E2fhKQ==
=M8XY
-----END PGP PUBLIC KEY BLOCK-----
I 've tried to remove the existing keys But Not able to remove them as well.
Is this the right way of removing the keys ?
rpm -e --allmatches 'gpg-pubkey-ec551f03-*' the ec551f03 is the
version of rpm -qi 'gpg-pubkey-*' query... Please correct
Could you tell what I am missing here that's causing the Issue.
Following are the Errors that is observed in .xsession-errors log file
===== BEGIN RING BUFFER (/usr/sbin/sabayon-apply) =====
MainThread 2013/10/08 18:34:23.3001 (sabayon-apply): No profile for
user 'root' found
MainThread 2013/10/08 18:34:23.3005 (sabayon-apply): Fatal exception!
Exiting abnormally.
MainThread 2013/10/08 18:34:23.3009 (sabayon-apply): Traceback (most
recent call last):
File "/usr/sbin/sabayon-apply", line 149, in <module>
sys.exit (util.EXIT_CODE_NO_USER_PROFILE)
SystemExit: 3
===== END RING BUFFER (/usr/sbin/sabayon-apply) =====
This configuration for the debug log can be re-created
by putting the following in ~//etc/sabayon/sabayon-debug-log.conf
(use ';' to separate domain names):
[debug log]
max lines = 1000
gnome-session[3707]: EggSMClient-WARNING: Desktop file
'/etc/xdg/autostart/esc.desktop' has malformed Icon key
'esc.png'(should not include extension)
GNOME_KEYRING_SOCKET=/tmp/keyring-x5SKbN/socket
SSH_AUTH_SOCK=/tmp/keyring-x5SKbN/socket.ssh
Failed to play sound: Not available
(polkit-gnome-authentication-agent-1:3917): GLib-GObject-WARNING **:
cannot register existing type `_PolkitError'
(polkit-gnome-authentication-agent-1:3917): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
W: main.c: This program is not intended to be run as root (unless
--system is specified).
** Message: applet now removed from the notification area
** (gnome-user-share:3948): WARNING **: gnome-user-share cannot be
started as root for security reasons.
08/10/2013 06:34:26 PM Autoprobing TCP port in (all) network interface
08/10/2013 06:34:26 PM Listening IPv{4,6}://*:5900
08/10/2013 06:34:26 PM Autoprobing selected port 5900
08/10/2013 06:34:26 PM Advertising authentication type: 'No Authentication' (1)
08/10/2013 06:34:26 PM Advertising security type: 'No Authentication' (1)
Initializing nautilus-gdu extension
Initializing nautilus-open-terminal extension
** Message: applet now embedded in the notification area
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Connecting to deprecated signal
QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e00019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
kio_http_cache_cleaner: Already running!
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x5200004
specified for 0x5200019 (Restore Se).
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
QObject::connect: Cannot connect (null)::activePartChanged(
KParts::Part * ) to KHTMLPart::slotActiveFrameChanged( KParts::Part *
Object::disconnect: Unexpected null parameter
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e08cb7 (timesofind).
libpng warning: Extra compressed data in IDAT
Window manager warning: Invalid WM_TRANSIENT_FOR window 0x4e00004
specified for 0x4e0a6e3 (Server Aut).
Highly appreciate the response.
Thanks And Regards
MZThe Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
After that I could Not install any rpm from rpm or yum command.
I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
with yum am getting this error
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
Could you tell something which i could try & may be that works.
Thanks
MZ -
How to create new folders while installing the VI in some other PC
Hi,
I want to create a folder while installing the VI to some other maching using installer/setup.exe and also i want to copy some excel file to the c: drive of installing PC while installing is their anyway to do this. Please help me in this regards
Regards
Shivakumar SinghHi
If you are installing vi from CD, then you might use the first approach with application builder.
If you just want to use any CD, than I think you should consider some interactive script with the user.
You can easily creat one with the windows commands, by means of *.cmd files. You can read about it by typing "help cmd" and/or "help" in the RUN in Windows. Then I propose to search the web for some examples on how to write the cmd scripts. If you know TCL there will be no problem for you.
You can also try to ask some dudes on the WinNT newsgroup. They will write it in no time.
Unfortunatelly I have now no time to write the script for you.
good luck
Pawel -
I purchased a student subscription to Creative Cloud. I got the confirming email. When I attempted to install the aps, kept getting a 30-day trial for all the aps. In the case of Photoshop, it was expired. How do I activate my Creative Cloud?
ChristinaW1111 for information on how to resolve the connection error preventing the active membership from authorizing then please see Sign in, activation, or connection errors | CS5.5 and later. If you have any questions regarding the steps listed within the document you are welcome to update this discussion.
-
Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
RamonMoving this discussion to the Adobe Reader forum.
-
Attn: Installing the Sample Applications from the ifs Development Kit
There are a number of problems with the sample Applications included in the
Developer's kit. These need to manually fixed in order to get the demos to work.
#1: Solaris Only
The install of the iFS Development Kit, replaces the existing adk.jar with a new
one containing some additional classes. Unfortunately the install process does not
set the correct privileges on the new version of adk.jar. Please ensure that the
file $ORACLE_HOME/ifs/lib/adk.jar is world readable.
Bug # 1304730
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#2: Generic
There is a problem with the way in which the login.jsp establishes a connection to
the repository. The current code makes incorrect assumptions about the name of the
iFS Service and the schema password.
The following changes are required.
In order to connect to the repository 4 pieces of information are required.
1. The iFS User Name
2. The iFS User's password
3. The properties file to be used
4. The database password of the user who owns the iFS Schema
The Login.jsp needs to be altered so that it requests these four arguments before
attempting to establish a connection to the repository.
(The current version only requests username and password).
All four arguments need to be provided as arguments to the login method on the
underlying JavaBean that the JSP invokes when it want to open a connection
to the repository.
***************** HERE IS THE REVISED CODE FOR INSURANCE APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.insurance.InsuranceLogin" %>
<%@ page import = "oracle.ifs.adk.security.IfsHttpLogin" %>
<html><head>
<jsp:useBean id="inslogin" scope="session" class="ifsdevkit.sampleapps.insurance.InsuranceLogin" />
<jsp:setProperty name="inslogin" property="*"/>
<%
String REDIRECT_PATH = "/public/examples/insuranceApp/claims";
boolean loggedIn = false;
if (inslogin.getSession() != null && inslogin.getResolver() != null)
// Use existing insurance login
loggedIn = true;
else
// No existing insurance login
IfsHttpLogin login = (IfsHttpLogin) request.getSession(true).getValue("IfsHttpLogin");
if (login != null && login.getSession() != null && login.getResolver() != null)
// Use existing IfsHttpLogin login
inslogin.init(login.getSession(), login.getResolver());
loggedIn = true;
if (!loggedIn)
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName");
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null &&
!username.trim().equals("") && !password.trim().equals(""))
// Login using username/password
try
if (serviceName == null | | serviceName.trim().equals(""))
serviceName = "IfsDefault";
inslogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", inslogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The username or Password was not valid, please try again.");
</SCRIPT>
<%
if (loggedIn)
// Redirect to the directory where the claim files reside
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Insurance Demo App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
& lt;/tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td><input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
*************************** END INSURANCE LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS
repository folder /ifs/jsp-bin/ifsdevkit/sampleapps/insurance.
****************************** INSURANCELOGIN.JAVA *******************************
package ifsdevkit.sampleapps.insurance;
* Copyright (c) 2000 Oracle Corporation. All rights reserved.
import java.util.Locale;
import javax.servlet.http.HttpSessionBindingEvent;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.security.IfsHttpLogin;
* The login bean for the Insurance demo app.
* <p>
* This class provide the login info. The class implements the
* <code>IfsHttpLogin</code> interface so it can share login data with other
* login beans.
* @author Edward Yu
* @version 1.0
* @see IfsHttpLogin
public class InsuranceLogin implements IfsHttpLogin
* The <code>LibrarySession</code>.
private LibrarySession m_session;
* The <code>FolderPathResolver</code>.
private FolderPathResolver m_resolver;
* Default constructor required by the jsp spec for the USEBEAN tag
* @exception IfsException
public InsuranceLogin()
throws IfsException
* Make a connection to iFS
* @param username The username to be used for login.
* @param password The password to be used for login.
* @param serviceName The service name to be used for login.
* @param schemaPassword The schema password to be used for login.
* @exception IfsException if operation failed.
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential me = new CleartextCredential(username, password);
ConnectOptions connection = new ConnectOptions();
connection.setLocale(Locale.getDefault());
connection.setServiceName(serviceName);
connection.setServicePassword(schemaPassword);
m_session = service.connect(me, connection);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
DirectoryUser user = m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Initialize the login bean.
* <p>
* The default constructor does not set the necessary fields so it needs
* to be set instantiation.
* @param session The <code>LibrarySession</code> object.
* @param resolver The <code>FolderPathResolver</code> object.
public void init(LibrarySession session, FolderPathResolver resolver)
m_session = session;
m_resolver = resolver;
* Return the login's session object.
* @return The <code>LibrarySession</code> object.
public LibrarySession getSession()
return m_session;
* Return the login's path resolver.
* @return The <code>FolderPathResolver</code> object.
public FolderPathResolver getResolver()
return m_resolver;
* Called when this object is bound to the HTTP session object.
* @param event The event when the object is bound to the Http session.
public void valueBound(HttpSessionBindingEvent event)
// do nothing
* Called when this object is unbound from the HTTP session object.
* @param event The event when the object is unbound to the Http session.
public void valueUnbound(HttpSessionBindingEvent event)
m_resolver = null;
try
if (m_session != null)
m_session.disconnect();
catch (IfsException e)
e.printStackTrace();
finally
m_session = null; // release the resources
*****************************END INSURANCELOGIN.JAVA ******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the complete source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this
code into a new file called. Save the file on the native file system
in a file called InsuranceLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/insurance/
*************** HERE IS THE REVISED CODE FOR WEB COMMAND APPLICATIONS ************
********************************** LOGIN.JSP *************************************
<%@ page import = "ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" %>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<meta name="Author" content="Patricia Li">
<title>Login</title>
</head>
<jsp:useBean id="wclogin" scope="session" class="ifsdevkit.sampleapps.webcommandapp.WebCommandLogin" />
<jsp:setProperty name="wclogin" property="*"/>
<%
String REDIRECT_PATH = "/ifs/ifsdevkit/sampleapps/WebCommandApp/html/main.html";
boolean loggedIn = false;
if (wclogin.getSession() != null)
// Use existing WebCommand login
loggedIn = true;
else
String username = request.getParameter("username");
String password = request.getParameter("password");
String serviceName = request.getParameter("serviceName" );
String schemaPassword = request.getParameter("schemaPassword");
if (username != null && password != null)
// Login to iFS
try
wclogin.init(username, password, serviceName, schemaPassword);
request.getSession(true).putValue("IfsHttpLogin", wclogin);
loggedIn = true;
catch (Exception e)
%>
<SCRIPT LANGUAGE="JavaScript1.2">
alert("The credentials are not valid; please try again.");
</SCRIPT>
<%
if (loggedIn == true)
// Go to main page...
response.sendRedirect(REDIRECT_PATH);
else
%>
<title>Web Command App Login</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body bgcolor="#FFFFFF">
<h2>WebCommand Application Login</h2>
<form METHOD=POST NAME="loginform" ACTION="login.jsp">
<table>
<tr>
<td><b>Username:</b></td>
<td><input type="text" name="username" value=""></td>
</tr>
<tr>
<td><b>Password:</b></td>
<td><input type="password" name="password" value=""></td>
</tr>
<tr>
<td><b>Service Name:</b></td>
<td><input type="text" name="serviceName" value="IfsDefault"></td>
</tr>
<tr>
<td><b>Schema Password:</b></td>
<td& gt;<input type="password" name="schemaPassword" value=""></td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>
<input type="submit" value="Log in">
</td>
<td>
<input type="reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
<% } %>
************************* END WEB COMMAND LOGIN.JSP ******************************
This code has been changed so that it requests the four agruments that are required
to connect to the repository and passes them to the login method on the underlying
bean. Note that we have provided the complete source code to this file in order to
make it simple to deploy the revised version of the code. Simply cut and paste this
code into a new file called login.jsp. Copy the File into the iFS repository folder
/ifs/jsp-bin/ifsdevkit/sampleapps/WebCommandApp
****************************WEBCOMMANDLOGIN.JAVA**********************************
package ifsdevkit.sampleapps.webcommandapp;
import java.util.Locale;
import oracle.ifs.beans.DirectoryUser;
import oracle.ifs.beans.FolderPathResolver;
import oracle.ifs.beans.LibrarySession;
import oracle.ifs.beans.LibraryService;
import oracle.ifs.common.CleartextCredential;
import oracle.ifs.common.ConnectOptions;
import oracle.ifs.common.IfsException;
import oracle.ifs.adk.filesystem.IfsFileSystem;
import oracle.ifs.adk.security.IfsHttpLogin;
import javax.servlet.http.HttpSessionBindingEvent;
* WebCommand application that illustrates the usage of the
* File System API.
* @version 1.0
* @pub
public class WebCommandLogin implements IfsHttpLogin
private LibrarySession m_session; // Session
private FolderPathResolver m_resolver; // Resolver
private IfsFileSystem m_ifs; // File System object
* Default constructor required by the jsp spec for the USEBEAN tag
public WebCommandLogin()
throws IfsException
* Make a connection to iFS
* @pub
public void init(String username, String password, String serviceName,
String schemaPassword)
throws IfsException
LibraryService service = new LibraryService();
CleartextCredential cred = new CleartextCredential(username, password);
ConnectOptions options = new ConnectOptions();
options.setLocale(Locale.getDefault());
options.setServiceName(serviceName);
options.setServicePassword(schemaPassword);
m_session = service.connect(cred, options);
m_resolver = new FolderPathResolver(m_session);
m_resolver.setRootFolder();
m_ifs = new IfsFileSystem(m_session);
DirectoryUser user = (DirectoryUser) m_session.getDirectoryUser();
if (user.isAdminEnabled())
m_session.setAdministrationMode(true);
* Use the existing connection.
* The default constructor does not set the necessary fields.
* @pub
public void init(LibrarySession session, FolderPathResolver resolver)
throws IfsException
m_session = session;
m_resolver = resolver;
m_ifs = new IfsFileSystem(m_session);
* Return the login's session
* @pub
public LibrarySession getSession()
return m_session;
* Return the login's path resolver
* @pub
public FolderPathResolver getResolver()
return m_resolver;
* Return the IfsFileSystem API object
* @pub
public IfsFileSystem getIfsFileSystem()
return m_ifs;
* Implementation of valueBound
* @pub
public void valueBound(HttpSessionBindingEvent e)
* Implementation of valueUnbound
* @pub
public void valueUnbound(HttpSessionBindingEvent e)
try
m_session.disconnect();
catch (IfsException ie)
************************* END WEBCOMMANDLOGIN.JAVA *******************************
This code has been changed so that it accepts the four agruments that are required
to connect to the repository and uses them to connect to the repository. Note that
we have provided the comple te source code to this file in order to make it simple
to deploy the revised version of the code. Simply cut and paste this code into a
new file called WebCommandLogin.java in the directory
$ORACLE_HOME/ifs/ifsdevkit/sampleapps/webcommandapp/
Compile the java class.
Copy the classfile to $ORACLE_HOME/ifs/custom_classes/ifsdevkit/sampleapps/webcommandapp/
Stop and Start all of the protocol servers.
This issue will be resolved on the next drop of the Oracle Internet File System
development kit.
#3. Making the BaseRendererClass available to the Protocol Servers
Note this step is not required if you have the 1.0.8.3 patch set installed.
Install the BaseRenderer Class. The BaseRenderer class is delivered in the jar file
ifsdevkit.jar and can be used to simplify the task of creating a custom renderer.
Unfortunately the jar file containing this class is not referenced in any of the Classpaths
used by the iFS protocol servers. This means that they will not be able to load any
customer renderers that extend BaseRenderer. In order to make BaseRenderer available
to the Protocol Servers it need to be placed in the appropriate directory under
<ORACLE_HOME>/ifs/custom_classes.
Extract the class from the ifsdevkit.jar.
ifsdevkit.jar is located in <ORACLE_HOME>/ifs/lib after the devkit has been installed.
jar -xvf ifsdevkit.jar
extracted: META-INF/MANIFEST.MF
extracted: BaseRenderer.class
Create the following directory heirachy in <ORACLE_HOME>/ifs/custom classes
oracle/ifs/server/renderers
Copy <ORACLE_HOME>/ifs/lib/BaseRenderer.class to
<ORACLE_HOME/ifs/custom_classes/oracle/ifs/server/renderers
That should do it.
Regards
Mark D. Drake
nullMoving to Top
-
I promise to refrain from venting my disgust :-) but when FF 9 blew up the entire web. I had all kinds of issues so I did things like Bill Gates taught us to do. I re-installed windows 7, brand new, formatted HD and all. The very first thing I did was open IE to download FF29 from the mozilla site and it installed. I went to pages I know have fits with flash on purpose, www.nydailynews.com, for instance and got the message that no flash was installed, do I want to install it? Well, yes, I have brand new FF on a brand new computer, so to ahead. Did the usual, installed Flash, shut down, and even rebooted the computer, and golly gee, the web pages tell me I have no flash installed. Its in IE, and of course chrome, and it appears in the installed program control panel, but I can't use flash with FF 29.
I wiped the hard drive and reinstalled win 7, then installed ff 28. Went to adobe and installed their latest flash version, and still no flash in any version of firefox. I also checked the option to never update, but when I rebooted an opend FF29, it miraculously turned into FF29, and of course still does not work with the flash plugin.
I think firefox has had a world of trouble with Adobe Flash for over a year and have hoped for a solution. Basically a browser that cannot run Flash media is totally useless. I wonder why this problem was no addressed and corrected, when instead all the the resources were put into raping my computer and forcing FF29 onto it?
I am not a cry baby, who wants to complain, but will you please fix this issue so I don't have to abandon my favorite browser.. I don't enjoy Chrome, and IE is just not an option for me.
Before you make any moreoverhauls on the UI, could you fix the problems with flash. I find it a little condescending to tell a 25 year user of computers to make sure " you have the latest versions" when in fact I have a brand new install of windows and the very latest from Adobe and Mozilla and they do no wok together, even when I down grade to FF 28, which as I told you, automatically upgrades to FF 29 each time I boot up.
Please help. IF installing the latest Adobe onto a brand new hard drive and install of windows 7 fails, what do you suggest, as the usual " version issue" cannot apply here.
FWIW, I have vista on my laptop with the same problems, the same reinstalls and the same guaranteed latest versions. Since the hd is formtted, there cannot be an residual FF dlls hanging around or in the registry.
I have always seen open source as the way to the future, since the first PC arrived, but its looking like a bad idea.
If you want to build a firefox that works, I will pay for it, so long as I can get help when things break. Browsers are huge in the web, so paying for reliable performance seems like a fair thing to do.
I am sorry, but I am frustrated at the lack of progress towards a solution and really do not wish to be told to see if I am using the latest versions. I have taken every step possible and gone all the way to a brand new machine and FF does not work with flash reliably.
Help? Please?
john
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>adobe test page says it is installed. but I said, some pages I visit say I don't have it installed.
I use prefbar ( I delete it and reinstall to make sure its not an issue) usually because it lets me turn off flash and avoid the crashing and locking up but when I check the flash block on prefbar, it says " plugin is not loaded"
I posted from the machine that does not work, but it does not work on my Vista Laptop, or my daughter's computer either. In all cases, I wiped the drives and reinstalled the OS and went directly to Firefox for 29 and to adobe for their latest.
Flash IS installed on my machine... It works in IE, and Chrome, but firefox 29 does not install the flash plugin, even tho the installer says all is well
The reason I went totally clean is to make sure there was no process blocking it or if Java was creating the issue as well. The reality is, I started with a brand new computer, three times, and Flash will not load into Firefox 29 in any case
I have started clean many times now and backed up and installed ff 28. I had no problem with the flash plugin using ff28, . I would have stayed there, but when shut down ff 28 and opened it later, it "magically downgraded to version 29" and i do mean " downgraded -( even tho I had gone into options and said do not install updates.
I am grateful for your attention. I find that web browsers are very important anymore, an a non functional one makes the web a waste. I mentioned www.nydailynews.com and would really not want to make a long list of every page that demands a flash plugin, for they are legion that I don't have, mostly because when the page wants flash, FF locks up. Its will not even let me copy the URL to try and make a list, but the browser is totally locked up and I have to kill the process I get the message I have been getting for about a year that the shockwave plugin has stopped working. There is no shockwave on my computer.
I know it looks like I have two different problems as the plugin does not load, but for instance, when I got it worrking in FF28, it loaded but constantly crashed an locked up the browser with the shockwave message, even tho I never install shockwave any time
Frustration is the word for the day, or the week :-)
Thanks much
Kind regards,
John -
Central instance can not startup when i install the SAP /DB2 9 env
Hi,
could anybody help me? I just installed the SAP /db2 V9.1 on HACMP cluster envrioment . By now , the SCS, ASCS, DB instance installation have been OK, Unfortunately , an
error occurs when I installed the CI.
the error message is that "ABAP Database db must be started on remote server " i check the trans.log , the error message is "DbSlConnect to 'AE1' as 'sapae1' failed" the detail informatioin ,please check the the following trans.log. but i can startup and activate the database, i can connect to db with sapae1 and sapae1 user with password.
first i install the DB2 software and db2 instance with the virtual hostname dbae1. i found the hostname in the db2cfg.log is not virtual hostname but physical name. i don't know what happens. In order to keep the hostname the same, i installed the CI on sapaix01, the error message is the same as before. i have upgrade the sap kernel and reinstall the CI again, the error is the same as before too Could you give me some suggestion.
First let me describe our cluster enviroment
For CI, and DI are not a Single point of failure , so the DI and CI
are out of cluster. The cluster enviroment just includes the
SCSASCS and DB instance. SCSASCS is installed on sapaix02, DB instance is installed on sapaix01
1. Host name
sapaix01 : DB instance and DI (visual hostname dbae1)
sapaix02: SCS,ASCS, CI (visual hostname scsae1)
2. file systems (sapaix01 DB instance )
Sapaix01
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 6291456 4792544 24% 2808 1% /
/dev/hd2 13107200 6175040 53% 73295 10% /usr
/dev/hd9var 13107200 12816904 3% 1336 1% /var
/dev/hd3 61603840 35610304 43% 3844 1% /tmp
/dev/fwdump 786432 785656 1% 4 1%
/var/adm/ras/platform
/dev/hd1 1048576 1016152 4% 213 1% /home
/proc - - - - - /proc
/dev/hd10opt 4194304 2512624 41% 6241 3% /opt
/dev/lvusrsapae1d10 41943040 41935984 1% 4 1%
/usr/sap/AE1/D10 (Local file system)
/dev/lvdb2ae1 20971520 20927640 1% 38 1% /db2/AE1
/dev/lvdb2logs 20971520 18346424 13% 25 1%
/db2/AE1/log_dir
/dev/lvdb2archive 41943040 41935984 1% 4 1%
/db2/AE1/log_archive
/dev/lvae1sapdata1 104857600 18817168 83% 47 1%
/db2/AE1/sapdata1
/dev/lvae1sapdata2 104857600 18817400 83% 48 1%
/db2/AE1/sapdata2
/dev/lvae1sapdata3 104857600 18817184 83% 48 1%
/db2/AE1/sapdata3
/dev/lvae1sapdata4 104857600 18817168 83% 48 1%
/db2/AE1/sapdata4
/dev/lvdb2db2ae1 20971520 19874760 6% 3931 1% /db2/db2ae1
/dev/lvae1saptemp 20971520 20967584 1% 12 1%
/db2/AE1/saptemp1
/dev/lvdb2db2as 10485760 10483504 1% 4 1% /db2/db2as
/dev/lvae1db2dump 10485760 10470600 1% 8 1%
/db2/AE1/db2dump
scsae1:/export/usr/sap/trans 20971520 20967592 1% 16 1%
/usr/sap/trans
scsae1:/export/sapmnt/AE1 12582912 9886168 22% 1529 1%
/sapmnt/AE1
10.241.13.54:/software2 1755152384 1154051696 35% 62702 1%
/software2
For the database version is 9.1 , so I installed the db2 software in
/db2/db2ae1/v9 , and db2 client software in /opt/IBM/db2/V9.1 (for DI)
on sapaix01, db2 client software in /opt/IBM/db2/V9.1 (I installed the
db software with virtual hostname dbae1 not sapaix01 )
sapaix02
Filesystem 512-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 6291456 4915592 22% 2790 1% /
/dev/hd2 13107200 6177120 53% 73643 10% /usr
/dev/hd9var 13107200 12857456 2% 1311 1% /var
/dev/hd3 21495808 16955192 22% 3283 1% /tmp
/dev/fwdump 786432 785656 1% 4 1%
/var/adm/ras/platform
/dev/hd1 1048576 1046848 1% 105 1% /home
/proc - - - - - /proc
/dev/hd10opt 4194304 2197776 48% 9002 4% /opt
/dev/lvusrsapae1 20971520 20966872 1% 47 1% /usr/sap/AE1
/dev/lvae1ascs01 10485760 10243360 3% 86 1%
/usr/sap/AE1/ASCS01
/dev/lvae1scs00 20971520 20706584 2% 97 1%
/usr/sap/AE1/SCS00
/dev/lvsapmntae1 12582912 9886168 22% 1529 1%
/export/sapmnt/AE1
/dev/lvusrsaptrans 20971520 20967592 1% 16 1%
/export/usr/sap/trans
scsae1:/export/sapmnt/AE1 12582912 9886168 22% 1529 1%
/sapmnt/AE1
scsae1:/export/usr/sap/trans 20971520 20967592 1% 16 1%
/usr/sap/trans
10.241.13.54:/software2 1755152384 1154051696 35% 62702 1%
/software2
3. hosts file the file is the same on sapaix01 and sapaix02
10.241.13.121 dbae1
10.241.13.125 scsae1
10.10.11.1 sapaix01_boot1
10.10.11.2 sapaix02_boot1
10.10.10.1 sapaix01_boot2
10.10.10.2 sapaix02_boot2
10.241.13.71 sapaix01 sapaix01_per
10.241.13.72 sapaix02 sapaix02_per
4. the installation guide and error message please check the attachment
<<installation_and errorlog.zip>>
5. I run db2ilist command nothing disppear
I have another questions
* whether does DB2 9.1 support installation on the diffirence
directory (default is /opt/IBM/db2/V9.1 my installation is
/db2/db2ae1/V9)?
* Whether does DB2 9 installation has some relationship with
hostname ?
* Why db2ilist command result is nothing after I finished the
DB instance installation ?
trans.log
"trans.log" 143 lines, 14041 characters
4 ETW000 R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 10.03.2008 - 20:25:40
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Mon Mar 10 20:25:40 2008 70 0.000070
4 ETW000 [dev trc ,00000] db_con_init called 25 0.000095
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 42 0.000137
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' ...
4 ETW000 60 0.000197
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/AE1/SYS/exe/run/dbdb6slib.o), hdl 0
4 ETW000 1018 0.001215
4 ETW000 [dev trc ,00000] Library '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' loaded
4 ETW000 39 0.001254
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 43 0.001297
4 ETW000 [dev trc ,00000] Version of '/usr/sap/AE1/SYS/exe/run/dbdb6slib.o' is "700.08", patchlevel (0.133)
4 ETW000 282 0.001579
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 42 0.001621
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/AE1/SYS/exe/run/dbdb6slib.o
4 ETW000 43 0.001664
4 ETW000 [dev trc ,00000] New connection 0 created 29 0.001693
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO
4 ETW000 50 0.001743
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 41 0.001784
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 40 0.001824
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO
4 ETW000 47 0.001871
4 ETW000 [dev trc ,00000] DB2 library successfully loaded DB2 library '/db2/db2ae1/sqllib/lib64/libdb2.a(shr_64.o)' suc
cessfully loaded
4 ETW000 9175 0.011046
4 ETW000 [dev trc ,00000] DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
4 ETW000 42 0.011088
4 ETW000 [dev trc ,00000] DB6 shared library (dbdb6slib) patchlevels 24 0.011112
4 ETW000 [dev trc ,00000] (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
4 ETW000 42 0.011154
4 ETW000 [dev trc ,00000] (0.8) Support of SDBUPDEXCL (note 847616) 25 0.011179
4 ETW000 [dev trc ,00000] (0.9) DB6: use export file for dbdb6slib (note 835135)
4 ETW000 40 0.011219
4 ETW000 [dev trc ,00000] (0.9) DB6: Core in getAndBindSQLDA (note 833183)
4 ETW000 39 0.011258
4 ETW000 [dev trc ,00000] (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
4 ETW000 51 0.011309
4 ETW000 [dev trc ,00000] (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
4 ETW000 40 0.011349
4 ETW000 [dev trc ,00000] (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
4 ETW000 40 0.011389
4 ETW000 [dev trc ,00000] (0.17) DB6: special characters in sidadm passwd (note 865839)
4 ETW000 40 0.011429
4 ETW000 [dev trc ,00000] (0.21) DB6: no SAP_INFO comments (note 873889)
4 ETW000 39 0.011468
4 ETW000 [dev trc ,00000] (0.22) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 41 0.011509
4 ETW000 [dev trc ,00000] (0.23) DB6: hints: get correlation names from view texts (note 868888)
4 ETW000 41 0.011550
4 ETW000 [dev trc ,00000] (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
4 ETW000 40 0.011590
4 ETW000 [dev trc ,00000] (0.27) DB6: activate value compression (note 886231)
4 ETW000 40 0.011630
4 ETW000 [dev trc ,00000] (0.28) DB6: optimization guidelines on views part 2 (note 868888)
4 ETW000 40 0.011670
4 ETW000 [dev trc ,00000] (0.30) DB6: no SQL trace for SQLCancel (note 892111)
4 ETW000 40 0.011710
4 ETW000 [dev trc ,00000] (0.33) DB6: append SAP_TA comment (note 873889)
4 ETW000 39 0.011749
4 ETW000 [dev trc ,00000] (0.34) DB6: activate value compression with quoted names (note 886231)
4 ETW000 41 0.011790
4 ETW000 [dev trc ,00000] (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
4 ETW000 41 0.011831
4 ETW000 [dev trc ,00000] (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
4 ETW000 41 0.011872
4 ETW000 [dev trc ,00000] (0.50) DB6: reread passwords for secondary connections (note 931742)
4 ETW000 41 0.011913
4 ETW000 [dev trc ,00000] (0.52) DB6: double quote table names in optguidelines (note 868888)
4 ETW000 41 0.011954
4 ETW000 [dev trc ,00000] (0.54) DB6: error handling in DBSL CLP (note 940260)
4 ETW000 39 0.011993
4 ETW000 [dev trc ,00000] (0.69) DB6: technical support of DB2 CLI driver (note 962892)
4 ETW000 40 0.012033
4 ETW000 [dev trc ,00000] (0.73) DB6: log table name on TRUNCATE failure (note 970743)
4 ETW000 40 0.012073
4 ETW000 [dev trc ,00000] (0.79) DB6: column type XML in index size calculation (note 982993)
4 ETW000 41 0.012114
4 ETW000 [dev trc ,00000] (0.82) DB6: CAST for SSTRING data types (note 989568)
4 ETW000 47 0.012161
4 ETW000 [dev trc ,00000] (0.86) DB6: long runtimes for R3szchk (note 1000847)
4 ETW000 39 0.012200
4 ETW000 [dev trc ,00000] (0.88) DB6: patch collection Dec 06 (note 1005574)
4 ETW000 40 0.012240
4 ETW000 [dev trc ,00000] (0.96) DB6: patch collection Jan 07 (note 1017852)
4 ETW000 39 0.012279
4 ETW000 [dev trc ,00000] (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
4 ETW000 41 0.012320
4 ETW000 [dev trc ,00000] (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
4 ETW000 41 0.012361
4 ETW000 [dev trc ,00000] (0.107) DB6: patch collection Apr 07 (note 1047194)
4 ETW000 39 0.012400
4 ETW000 [dev trc ,00000] (0.110) DB6: SAP user names ending with non-ASCII char (note 1054555)
4 ETW000 41 0.012441
4 ETW000 [dev trc ,00000] (0.113) DB6: work process type in application snapshot (note 1059905)
4 ETW000 41 0.012482
4 ETW000 [dev trc ,00000] (0.114) DB6: connect using SAPDBHOST and DB2DB6_SVCENAME (note 1062049)
4 ETW000 41 0.012523
4 ETW000 [dev trc ,00000] (0.117) DB6: patch for execution of long DDL statements (note 1069658)
4 ETW000 41 0.012564
4 ETW000 [dev trc ,00000] (0.122) DB6: SNAPSHOT_TBS_CFG table function is deprecated (note 1077963)
4 ETW000 41 0.012605
4 ETW000 [dev trc ,00000] (0.123) DB6: CLP commands on Windows with V9.1 (note 1080149)
4 ETW000 40 0.012645
4 ETW000 [dev trc ,00000] (0.124) DB6: Set DB2CODEPAGE=819 for non-Unicode (note 1084400)
4 ETW000 40 0.012685
4 ETW000 [dev trc ,00000] (0.126) DB6: reuse optguidelines on FAE statements (note 1087375)
4 ETW000 41 0.012726
4 ETW000 [dev trc ,00000] (0.126) DB6: Enforce DB2CODEPAGE=819 for non-Unicode environments (note 1084400)
4 ETW000 42 0.012768
4 ETW000 [dev trc ,00000] (0.128) DB6: db6_free on invalid memory area (note 1092030)
4 ETW000 40 0.012808
4 ETW000 [dev trc ,00000] (0.133) DB6: statement cache enhancements (note 1101031)
4 ETW000 40 0.012848
4 ETW000 [dev trc ,00000] Supported features: 24 0.012872
4 ETW000 [dev trc ,00000] ..retrieving configuration parameters 24 0.012896
4 ETW000 [dev trc ,00000] ..done 126 0.013022
4 ETW000 [dev trc ,00000] Running with UTF-8 Unicode 25 0.013047
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] CON = 0 (BEGIN)
4 ETW000 67222 0.080269
4 ETW000 [dev trc ,00000] &+ DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N Security processing failed
with reason "24" ("USERNAME
4 ETW000 48 0.080317
4 ETW000 [dev trc ,00000] &+ AND/OR PASSWORD INVALID"). SQLSTATE=08001
4 ETW000 45 0.080362
4 ETW000 [dev trc ,00000] &+
4 ETW000 45 0.080407
4 ETW000 [dev trc ,00000] &+
4 ETW000 46 0.080453
4 ETW000 [dev trc ,00000] &+
4 ETW000 45 0.080498
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1640] (END) 26 0.080524
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'AE1' as 'sapae1' failed
4 ETW000 71 0.080595
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'AE1'"Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens
Maybe you are looking for
-
Hi Friends, I need to delete leading zeros from material while loading to ODS and have tried followings options: CONVERSION_EXIT_ALPHA_OUTPUT Shift Variable LEFT deleting leading zeroes Both the options did not work in my case. I need to delete leadi
-
Hi, Does anyone has any idea on how to do SSL based TCP/IP communication. Any help/ideas/suggestions would be appreciated. Thanks, Runjhun Agarwal.
-
Waiting for sprint note 4 pre order
Pre ordered device on Oct 15,was told it would be there release day the 17th. Come to find out it still hasn't shipped. I called 1877 bby mobile number and they called the store and was told they will not be receiving any this week. So now another we
-
Tcode for mass upload of cost allocation?
Hi all, I would like to get a transaction code that will allow me to run a mass upload of cost allocation? I tried ZFR_COST_ALLOC but the system didnt accept it. Please help. Boubacar-Issa
-
I have the following procedure : CREATE OR REPLACE PROCEDURE proc_REF(cur_ref IN sys_refcursor) is FIELD1 varchar2(200); BEGIN LOOP FETCH cur_ref INTO FIELD1; INSERT INTO tipos_prueba (cod_tipo) VALUES (FIELD1); EXIT WHEN cur_ref%NotFound; END LOOP;