Regarding installation and usage of oracle forms 11g on windows 7

dear all,
i am new to the oracle forms and reports feature. i tried installing forms and reports following certain steps which i could find from the internet, but it could not be installed.
i ended up crashing my system.can anyone of you help me in providing the step by step installation of oracle 11g forms and reports on windows 7 64 bit.
regards,
sreejith

When I was cleaning my email account i noticed message from OTN forum. I forgot to reply :/
I followed instructions from the message above and it worked. Oracle XE + PPRD (only forms to save disk space and RAM) + weblogic, i have also installed APEX 3.2.1. It all works at my win 7 system
There where one bug in forms builder database connector, solution was to replace it with the file from SQL*Plus (AFAIR it was tnsnames.ora file)
So thank you Chris999, you helped me a lot.

Similar Messages

Error installing oracle forms 11g in window 7

hi am having this error when installing oracle forms in windows Starting Oracle Universal Installer...
Checking swap space: 0 MB available, 500 MB required. Failed <<<<
Checking monitor: must be configured to display at least 256 colors Higher than
256 . Actual 4294967296 Passed
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n

ok i go my computer>system properties and change my performance to 2046

Re:install oracle forms 11g in window 7 home basic in 64 bit

I have done install oracle forms11g successfully but not configure successfully. error is does not create domain etc.
so please provide the needful solutions.

Moved from SQL and PL/SQL forum to Forum Home » Application Development in PL/SQL » Forms

Oracle Forms 11g Installation. Create domain problem

Hi,
I am installing Oracle Forms 11g on Windows 7 32-bit system. Installation is done. Create domain is failing during the configuration process.
I searched everywhere but cudnt find a solution specific to the problem.
Only recognisable error message is 'CSF Entries will not be parsed since the AdminServer is unreachable'.
I have checked Node Manager is not running.
Please find below the snapshot of the last few lines of the log file
[2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] New Description: Application Configuration
[2014-05-23T13:43:22.554+05:30] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] Old Description: Application Configuration
[2014-05-23T13:43:22.570+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_HOME_PATH) to:C:/Oracle/Middleware/user_projects/domains/ClassicDomain. Value obtained from:USER
[2014-05-23T13:43:23.787+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2014-05-23T13:43:27.297+05:30] [as] [NOTIFICATION] [] [oracle.as.install.engine.config] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Starting Action:Application Configuration
[2014-05-23T13:43:27.297+05:30] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [SRC_CLASS: oracle.as.install.classic.ca.standard.ClassicConfigMain] [SRC_METHOD: doExecute] ENTRY
[2014-05-23T13:43:35.117+05:30] [as] [WARNING] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Executing a Jaxb workflow ...
[2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
[2014-05-23T13:43:35.133+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Begining Oracle Fusion Middleware Configuration ...
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] ENTRY ASDomain.createDomain
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: ENTRY........
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@180874
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: 2........
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Set the Extion Id to START........
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: Did the assignment...
[2014-05-23T13:43:35.180+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] reportStartConfigAction: EXIT........
[2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Domain Home: C:/Oracle/Middleware/user_projects/domains/ClassicDomain
[2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Oracle Home: C:/Oracle/Middleware/Oracle_FRHome2
[2014-05-23T13:43:35.320+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] Setting os object values in Python
[2014-05-23T13:44:18.861+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 21] [ecid: 0000KOc8z4d1NeLqyOedMG1JVjlV00000C,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Any help is highly appreciated.

Hi,
Please run the below commands in the command prompt :-
1)hostname
   Ex:-
       C:\Users>hostname
        celvpint8511
2)nslookup <Result of the step 1>
   Ex :- C:\Users>nslookup celvpint8511
            Server:         192.135.82.132
           Address:        192.135.82.132#53
           Name:   celvpint8511.us.oracle.com
           Address: 10.64.166.6 [ So this is the IP Address which needs to be used ]
So please get the right IP and then update it in the host file.
Regards,
Prakash.

Oracle Reports In Oracle Forms 11g Parameter problem.

Hello techies,
            I am using Weblogic server 10.3.5 with oracle forms 11g at windows 7.I have a report that is Bar_code.rdf.It has two parameters as:
P_1---->character type---->accepts the options(barcode generated or barcode not generated)
P_2---->Number type------->accepts the subgroupitemId.
This report is well working with oracle report builder. Now I tried to run it from my oracle forms.It runs but it does not accept Parameter P_2. I have used
sParms := 'P_1='||:L_BAR||' P_2='||TO_NUMBER(:TXT_ITM_GRP);
set_report_object_property(roRepid,report_other,sParms||' paramform=yes');
set_report_object_property(roRepid,REPORT_SERVER,sReportServer);
v_rep := RUN_REPORT_OBJECT(roRepid);
sJob := SUBSTR(v_rep,LENGTH(sReportServer)+2);   --
But there is a parameter form is shown but when i click submmit query the,,,,there is
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
please give me the solution
thank you
regards
aaditya

Hi
are there character symbol appeared in your parameter ?
i've suffering for some unexpected error for parameter value end up with slash , like D:\temp\   ....
and oracle sr (support) says that with workaround mechanism (add additional slash like D:\temp\\ ) they have not plan to fix this issue .
hope this helpful for you.

Ctrl+Z does not work in Forms 11g on Windows (undo function)

In Oracle Forms 11g on Windows, the undo function, ctrl+Z does not work as it did in Forms 6i.
The ctrl+C and ctrl+V (copy/paste) work fine.
I looked into the Forms key mapping resource file and no solution there.
Thanks

I'm not sure what functionality you believe you had previously, but UNDO does not have any automatic functionality built-in. This is clearly explained in the Builder Online Help. Here is some of that text. Notice carefully what it says about "Undo":
<blockquote>Magic Item Property
<blockquote>Description_
Specifies one of the the following predefined menu items for custom menus: Cut, Copy, Paste, Clear, Undo, About, Help, Quit, or Window. Magic menu items are automatically displayed in the native style for the platform on which the form is being executed, with the appropriate accelerator key assigned. Cut, Copy, Paste, Clear, Window, and Quit have Built-in functionality supplied by Oracle Forms, while the other magic menu items can have commands associated with them.
Usage Notes_
The following settings are valid for this property:
Cut, Copy, Paste, Clear
These items perform the usual text-manipulation operations. Oracle Forms supplies their functionality, so the designer may not enter a command for these items.
Undo, About
These items have no native functionality_, so the designer must enter a command for these items. Any type of command can be used for these items, except Menu.
...</blockquote>
</blockquote>

Oracle forms 11g , mailmerge errors WUO-712 and WUO-707

error
client_ole2.set_property(mm_obj, 'Destination', 0);
WUO-712 Unable to set Property: {0}; Exception: {1}.Type: UserDescription: WebUtil was unable to set the specified Property tothe specified value
client_ole2.invoke(mm_obj, 'Execute');
WUO-707 Unable to invoke Method: {0}; Exception: {1}.Type: UserDescription: WebUtil was unable to invoke the specifiedMethod
I migrated oracle forms 10g application to Oracle forms 11g.
One form uses mailmerge is failing. This options was working in previous 10g version using WinWord 2003.
Failing in current version Oracle 11g and Winword 2007
Three documents are invovled in the process
mailmerge_data.docx --- datasource document -- have address attributes
FOBSENT.docx -- template document
output.docx -- using mail merge options address are populated from mailmeger_data.docx into FOBSENT.dox and created a new output word document which we send it to customer.
------------------------------------------------------- WUO-712 and WUO-707
client_ole2.set_property(mm_obj, 'Destination', 0); -- 0 is value of constant wdSendToNewDocument
client_ole2.invoke(mm_obj, 'Execute');
Any help to resove this is apprciated.
Thanks in Advance
Raghav

Sorry I was away,
We migrated 10G forms to 11g also Winword 2003 to Winword 2007
It's erroring at this point
mm_obj := client_ole2.get_obj_property(template_doc, 'MailMerge');
Failing ---> client_ole2.set_property(mm_obj, 'Destination', 0); -- 0 is value of constant wdSendToNewDocument
Failing --->client_ole2.invoke(mm_obj, 'Execute');
Not able to read or open document use to work in previous version.
Raghav

Oracle Forms 11g / frmall.jar or frm90all.jar installation

I need to import Oracle.Forms.properties.ID in one of my JDeveloper application.
I am using JDeveloper 10.1.3.5. I need frmall.jar/frm90all.jar to make the above import statement work in JDeveloper if i am not mistaking.Basically i need to add either of the .jar in Jdeveloper.
For that I came accross Oracle Forms 11g. For Oracle Forms 11g I have installed wlserver_10.3. and i have ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1\Disk1 with Oracle Fusion Middleware forms 11g setup. When I click on that setup getting a Oracle screen asking me for Oracle Middleware Home and Oracle Home Directory. My Oracle 11g db is installed in C:\new\Oracle11g.
And setting up ORACLE_HOME pointing t that directory. clicking on next on that screen is giving errors like Oracle Home location is not specified , The specified MiddleWare Home is not valid and Oracle.classicwsl.top could not be located etc.
Can Anyone help me solving this issue so I can use Oracle Forms ID in JDeveloper.?

Let me tell you what exactly i am doing :
I have set the below environment variables:
Path=C:\new\Oracle11g\bin;D:\app\veeralakshmi_v01\product\11.1.0\client_1\bin;C:\Program Files\ZeroC\Ice-3.4.1\bin;C:\Program Files\Java\jdk1.5.0_16\bin;
ORACLE_HOME=C:\new\Oracle11g\BIN;
I have C:\Oracle\Middleware in this path i have folders and sub folders like C:\Oracle\Middleware\jrockit_160_17_R28.0.0-679
C:\Oracle\Middleware\oepe_11gR1PS2
C:\Oracle\Middleware\wlserver_10.3
C:\Oracle\Middleware\modules
C:\Oracle\Middleware\coherence_3.5
C:\Oracle\Middleware\jdk160_18
and other folders and files.
Now when i click on \\myshecsccm01\PackageSource\ofm_pfrd_win_11.1.1.3.0_32_disk1_1of1\Disk1\setup it takes me to Oracle 11g fm . On step 2 of 6
for Oracle Middleware Home :C:\Oracle\Middleware
and Oracle Home Directory: ORACLE_HOME
i m giving.
Here the Middleware folder contains the above folders/sub folders listings.
and clicking on next I am getting the below errors:
INST-07010: Validation of Oracle Home location failed. The location specified does not exist.
Enter a valid existing directory
INST-07100: The Oracle home provided does not contain Oracle Portal 11.1.1.2.0.
In order to patch your existing version please provide an Oracle home that contains the product mentioned above. If you choose to continue, only the oracle_common directory and any components that both products have in common will be patched.
INST-07293: Middleware home location specified does not have the required Oracle homes installed in it. The Oracle homes for the following components is not installed oracle.classicwls.top.
Provide a different Middleware home location or install the required Oracle Products and try the install again
So as per your suggestion My middleware folder is not empty.
what should I do?
And after doing all these installtions will i be able to get the frmall.jar file which i really required to use it for importing Oracle.forms.properties.ID?
Edited by: 874822 on Jul 25, 2011 9:40 PM

Where and what to download if I like to use Oracle Form 11g

Hello all:
where and what to download if I like to use Oracle Form 11g
Thx in advance.

hi
check out the following link.
Oracle Forms 11g available now!!
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html
Re: Install Forms & Rpts 11.1.1.3 with WebLogic Server 10.3.3 on Win32
hope this helps u.
sarah

Oracle Forms 11g R2

All,
I have done the following to Install Oracle Forms 11g R2 on a windows 7 64 bit computer. For some reason I am just not able to complete my installation. I will really appreciate any help from any one on this forum.
1.     I downloaded jdk-6u30-windows-x64 from the web and installed it on my computer
2.     I created Junctions of all the paths that have spaces in them, for example I made a Junction for “Program Group” as “pg”. The Paths which was “c:\Program Group\MSoffice” is now “c:\pg\MSoffice”. Once all the Junctions were completed and tested, I changed the “Path” environment variable and used the Junctions in the Path variable. I have no more spaces in my Path.
3.     I downloaded wls1035_generic from the web and successfully installed it.
4.     I then downloaded ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1 from the web and unpacked it and installed it. In the installation part, first I just used the option of just installing and not configuring. Once the installation was completed, I started doing the configuration part. This is where I am getting stuck. The process of “Creating Domain” takes a long time and then it fails. After the failure, the process starts doing “Creating ASInstance” and hangs there forever with no progress.
I will really appreciate any help from any one in successfully completing this process of Installation.

FYI I don't think forms had a problem with spaces historically but java might have. So don't install the jdk in a directory with spaces in it (nor have the name be too big, have unusual characters in it, etc) Be sure no java related environment variables have spaces in them like JAVA_HOME, CLASSPATH whatever. (at the command prompt type
set to see them. The biggest forms problem in my experience was with parentheses in the path. (Some other people have suggested this to that author but she has not changed her directions:
http://oracleformsinfo.wordpress.com/2012/03/07/tips-and-tricks-the-dummies-guide-to-installing-oracle-forms-11g-r2-on-64-bit/
Regarding this junction thing I don't know what you did there. That sounds scary. The way to get rid of bad things
in the path in my experience was to replace IN THE PATH (which is an environment variable) the offending items with the 8.3 versions. The path problem was that something in the path, even if it had nothing to do with forms, was able to derail forms from running as forms tripped over evaluating the path.
The biggest offender in the past was "program files (x86)" which is created by windows typically so the likelihood of it being there is about 99.9%. So you would check what the 8.3 name of that was (from a current directory of c:\ dir *.* /x )
The good thing about the 8.3 trick is that either version was accepted by windows programs. Whereas if you actually changed the name of a directory like "Program Files" to "ProgramFiles" then all the references to that would have to be modified and it would cause everything in program files to probably quit working. But referring to any directory by its 8.3 name continues to work.
dir program*.* /x
results would likely be:
Program Fiiles progra~1
Program Files (x86) progra~2
And replace program files (x86) IN THE PATH environment variable with the /x version (progra~2)
accessing environment variables:
control panel,
system and security
system
advanced system settings
advanced
environment variables
system variables
path

Is it possible to use DVT with Oracle Forms 11g?

Hi,
I have posted my question on Oracle Forms forum but I didn't get answere regarding dvt usage in Oracle Forms.
Now I try it here.
Oracle Forms 11g and charts / graphs
====
one of our customers has a forms 6i applications including oracle graphics and is thinking about upgrade to forms 11g.
Oracle graphics has been desupported with 6i and with 9i Oracle BI beans has been recommended.
Forms 10g is the terminal version for Oracle BI beans too (http://www.oracle.com/technetwork/middleware/bbi-beans/overview/oraclebibeanssod2008-129560.pdf).
What's the recommended technology for graphs/charts in Forms 11g?
Is it ADF DVT?
If yes, are there examples how to call them from Forms 11g?
=====
regards
Peter

Hello Shay,
thank you very much for the link.
I wonder if there any plans from Oracle to provide and support a DVT wrapper in next versions of Oracle Forms 11g
As the customer project is planned for Q2/2011 we still have some time and hope for this :-)
regards
Peter

Error while installing ofm_frmrpts_win_11.1.2.0.0_32 Oracle Forms 11g

Dear Oracles,
I am facing problems while installing Oracle Forms 11g
I read many documentations - and follow many pages during installing - but the same error appears every time
I installed Oracle Web Logic Server wls1035_generic.jar perfectly, and then create a web logic domain through Fusion Middleware config wizard
and test the web server through
http://localhost:7001/console
http://img811.imageshack.us/img811/8558/consoleto.jpg
and then installed Oracle Forms and Reports 11g R2 using ofm_frmrpts_win_11.1.2.0.0_32 3 - Disks
I chose Install S/w only - it was installed successfully
then I opened Configure Classic instance and follow wizard
It stopped at creating domain
every time i try it.
with images to show my problem
http://img404.imageshack.us/img404/4131/ofmfrmrptswin11120032.jpg
Iam using win XP-32 bit with 2 GB Ram pc and Oracle DB 11g
and this is the Log
error part
[2012-11-07T22:17:59.937-08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] reportStartConfigAction: EXIT........
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0]
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
[2012-11-07T23:57:03.859-08:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000JfUeR^Z8XrWjLxVK8A1GaorA000004,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:339)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:662)
]]

In addition to Craig's feedback consider the following:
If you did not read the system requirements and installation guide, you likely will have problems.
http://docs.oracle.com/html/E25460_01/r2_fr_requirements.htm
<blockquote>1. Does your machine have a static IP address and/or the Windows Loopback adapter installed and configured?
2. You indicated that you have 2gig of RAM. This is the minimum requirement just to install the product. It is very unlikely that you will be able to comfortably use the product with 2gig of RAM. Likely the performance will be so slow that processes will timeout before they can successfully start. You can actually see this occurring already - look carefully at the log info you posted.
Further, if you are also attempting to run an 11g database on the same machine, this will never happen. Having only 2gig of RAM will never support running the DB and the components of FMw, and the Operating System.</blockquote>

"Bad Applet class name" error while recording on Oracle Forms 11g through OpenScript (JRE 1.7.0_17)

Hi,
I am trying to record automation functional test script on Oracle Forms 11g using OpenScript.
Able to open the browser, but after accessing application URL, getting application error as "Bad Applet class name"
Java Plug-in 10.17.2.02
Using JRE version 1.7.0_17-b02 Java HotSpot(TM) Client VM
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
SSV dialog is suppressed........
cracked oracle.forms.engine.Main
Loading cached Forms Jars ...
Is this version (Oracle forms 11g, JRE 1.7.0_17) supported by OATS-OpenScript ?
Please advise if there is any work around here.
Thanks.

From the last OATS release notes available in the C:\OracleATS\docs directory:
4.1 Oracle Functional Testing/OpenScript
Oracle Functional Testing’s OpenScript scripting platform has the following system
requirements:
■ Operating System (32-bit and 64-bit versions): Windows XP, Windows Vista,
Windows 2003, Windows 7, Windows 2008, Windows 2008 R2.
■ Memory: Minimum 1 GB
■ System: x86, 32-bit or 64-bit processor, 2.6 GHz or faster
■ Disk Space: 4 GB minimum
■ Browser: Internet Explorer 7.x, 8.x., 9.x; Firefox 3.5/3.6, 6.x, 10; Chrome 27+
(playback only).
■ Java Runtime Environment: JRE 1.6 minimum (up to build 38), JRE 1.7 (up to build
11) .
So basically, it's not supported... Can you try with another JRE version?
As always don't forget to run OpenScript as administrator on W7/8 or equivalent
JB

How to use Java Beans in Oracle Forms 11g at 64 bit windows7

Hello Experts,
I am using Oracle forms 11.1.2.2.0 with weblogic 10.3.6 generic at windows 7 64 bit.
My java version is jdk1.7.0_51.
Now I have a htmlbutton.jar (which is for bean item in oracle form and this jar file works well for oracle forms 11g 32 bit windows 7 environment).
I have takken steps:
1:-Put jar file in home\java folder.
2:-add this jar file into archive in formsweb.cfg.
3:-Add this this jar file(which is in my home- java folder) in form_class path in registry.
Now when I try to locate this jar file in my oracle form.There is no such jar file.what are the steps to use this jar file in oracle forms bean item.
Please told me what is wrong here.
thank you
regards
aaditya.

It is unclear where you are having a problem. Is your issue at runtime (when the form runs in the browser) or when working in the Builder on the form?
Also be aware that you will need to sign your jar and include some new manifest entries. Refer to the Java 7u51 documentation and blogs that discuss the changes.
https://blogs.oracle.com/java-platform-group/entry/new_security_requirements_for_rias
http://docs.oracle.com/javase/7/docs/technotes/guides/jweb/manifest.html

Showing Blank Records oracle forms 11g

Deal all..
i am using oracle forms 11g , i created a form by using data block wizard & layout wizard , but when i run the form, the form running successfully in browser, url is ( http://arun-pc:9001/forms/frmservlet), but it is showing empty records.
when i check with sql plus user Scott , i found 10 records in departments table , same user and same table i used in oracle forms.
i don't know what is the problem.. i am new to oracle forms please help me..
i am waiting 4r your valuable reply
thank s in Advance..

Hello. Mr.harsh shah...
Thank u for your reply..
I follow the link what u given in above post.. But still i have the same issue.. i am not sure, but i think i have problem with my Environment, bcz in many blogs i read that oracle forms is not recommended to use with 64 bit OS. and second , iam not using developer suite 10g,
currently i am using,
operating system: windows server 2008 r2
weblogic server :- wls1036 (64bit)
JDK :- 7u17 64bit
Oracle forms :- 11g
and database in another host , just i edit tnsnames.ora file in forms directory. the following are my configuration options
Oracle Forms and Reports Installation
Configuration Options
Middleware Home Location: C:\Oracle\Middleware
Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
Oracle Instance Location: C:\Oracle\Middleware\asinst_1
Oracle Instance: asinst_1
Domain Option: Create Domain
Domain Name: ClassicDomain
Domain Home: C:\Oracle\Middleware\user_projects\domains\ClassicDomain
Domain Host Name: WIN-DMJUC51KRHF
Domain Port No: 7001
User Name: weblogic
Automatic Port Detection: true
Administrator Console: http://WIN-DMJUC51KRHF:7001/console
EM Console: http://WIN-DMJUC51KRHF:7001/em
EMAgent URL: http://WIN-DMJUC51KRHF:5155/emd/main
Forms URL: http://WIN-DMJUC51KRHF:8888/forms/frmservlet
Reports URL: http://WIN-DMJUC51KRHF:8888/reports/rwservlet
i check all the links above, all services showing running successfully.. but when i run the form , i dont fine any records , showing empty and blank records..
please give me clarification ...
Thank u very much..
Arun

Regarding installation and usage of oracle forms 11g on windows 7

Similar Messages

Maybe you are looking for