Regarding Installation of Oracle 10g in windows Advanced 2000 Server

Dear Friends,
Please let if Oracle 10g Release 2 can be installed in windows Advanced 2000 Server and what are the requirements for installing on this Operating System.
please do post your answers here(Plz do not post links)
thanks

please do post your answers here(Plz do not post links)WHY???
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Similar Messages

Silent Installation of Oracle 10g on Windows XP

Hi,
I was trying out "SILENT INSTALLATION OF ORACLE 10g ON WINDOWS XP", where I was getting the following error. Can you please help me out.
COMMAND GIVEN : D:\database>d:/disk1/setup.exe -responsefile d:/disk1/response/custom.rsp -silent -nowelcome
ERROR THROWN : Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\RAVIKA~1\LOCALS~1\Temp\OraInstall2011-04-06_07-54-37AM. Please wait ... Oracle Universal Installer, Version 10.2.0.3.0 Production
Copyright (C) 1999, 2006, Oracle. All rights reserved.
You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2011-04-06_07-54-37AM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
Please press Enter to exit...
So I changed the "CUSTOM.RSP" response file parameters by adding
DEP_MODE="EE"
TLDepModes="EE"
But it is still throwing me the error.
REquesting you to help me out in this case.
Thanks and REgards
Ravikanth Garimella

Pl identify exact versions of "10g" and "Windows XP". Pl also post the last 100 lines from the install log.
Pl note that Home versions of Windows are not supported - http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#CHDHGGFE
Pl see the Install Guide on how to use response files -
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/advance.htm#i634763
http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/c_oui_appendix.htm#BABGHAIA
HTH
Srini

Installation of oracle 10g by window 2000 Server or Window XP professional

Dear all
Did you tried installatin of oracle 10g in Window 2000 Server and/or Window XP professional
installation on which one will be more reliable and stable?
As I am choosing which OS will be better as a Server
please help
Francis SZE

I don't think XP professional would be recommended as server.
would be better if you use 2000 Server or best if you use 2003 if you like windows environment
cheers

Installation of Oracle 10g in Windows XP, 32 bit processor.

Dear Friends,
I am using a windows XP 32 bit processor PC. I would like to install Oracle 10g database to practice some SQL and PL-SQL queries on it. I have already installed SQL developer, however, am not able to install the 10g database.
Please suggest.
Thanks in advance
Murli

Hi Murli;
What is your xp version? Home version is not certfied.
Please check this search
Also see installaion guide:
http://www.oracle.com/pls/db102/homepage
Regard
Helios

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Oracle 10g on Windows 2008 Server Std. edition

Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh Bansal

With due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

Installation of oracle 10g and AS 10G r2 in sun solaris 9.0

hai,
can any send me the documents regarding installation of
oracle 10g and AS 10G r2 in sun solaris 9.0.
regards
ashik

You know you can find the documentation for most products via urls here on OTN, right?
Docu index:
http://www.oracle.com/technology/documentation/index.html
AS 10.1.2:
http://download.oracle.com/docs/cd/B14099_19/getstart.htm

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Oracle 10g for Windows installation - Error 1067

Hello Folks
I am trying to install Oracle 10g for Windows on my WIndows 7 Ultimate OS. Everything went fine until I rebooted and tried to run the *SQL Plus. ALthough the Listener as well as the Oracle Servide shoudl automatically start, but for some reason..they didn't. As a result, I went into the Services and tried to manually run them but to my disappointment getting the folowing error:
Windows could not start the OracleServiceORADB1 service on local computer.
Error 1067: The process terminated unexpetedly.
Any idea what went wrong..and how should I get this right?
Thanks

Pl identify the exact version of "10g" that was installed.
The only version that is supported is 10.2.0.5 - see http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
Srini

TNS 12549 error on installing Oracle 10g on Windows XP Home?

Hi,
I installed Oracle 10g on Windows XP Home by clicking on Disk1\install\setup (NOT Disk1\setup as instructed since that did not work). Everything seemed to go fine except towards the end of the install I got a whole bunch of errors saying that "operating system resource quota exceeded". There were options to Ignore or Abort at most of these stages. I chose Ignore and the whole install seemed to complete but I am not able to connect to the database using sqlPlus. I looked at the log files created where I saw a whole bunch of errors in several files. For example in sqlnet log, I saw this error (among others) appeneded below. It seems obvious that some resource quotas were exceeded but I am not able to figure out exactly what quotas should be increased. Any help regarding this would be greatly appreciated.
Thanks.
Sudip
===================================================
Fatal NI connect error 12549, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=CHAKRABORTY-04)(USER=Owner))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 13-MAR-2005 18:03:25
Tracing not turned on.
Tns error struct:
ns main err code: 12549
TNS-12549: TNS:operating system resource quota exceeded
ns secondary err code: 12560
nt main err code: 519
TNS-00519: Operating system resource quota exceeded
nt secondary err code: 8
nt OS err code: 0
===================================================

XP Home is not supported, despite of this some people get oracle to work.
But in your case, possibly your machine has simply not enough resources, 12549 is a very generic error. Check the hardware requirements in the installation guide.

Hi problem with Oracle 10g On windows 2003 SR1

Hi,
I am installing NW2004S on windows 2003 SR1 (Std.Edition). After the installation of Oracle 10g I am getting the error "I*SQLPlus service" can't be started. Any help on this regard is greatly appreciated.
Regards,
Rao.M

The help I can give you is to suggest you to post in the appropriate forums:
SAP on Microsoft Windows
You will have more chance to get right responses.
Regards,
Sandro

Oracle 10g on windows 7

Hi,
i have installed oracle 10g on windows 7
The issue I am facing is that while trying to login via sqlplus, on entering the id/password,it automatically exits out.
We crosschecked the login credentials and they were correct.
I am new to Windows 7.
Kindly add your suggestions.
Thanks

Hi user;
You are on wrong site my friend.This forum mostly related wiht oracle e-business suite. Its better to close your thread as answered than post your issue on below forum part:
Forum Home » Database » Database - General
Forum Home » Database » Installation
Regard
Helios

Oracle 10g on Windows 2003: instance not autostarting

I'm installing Oracle 10g (10.2.0.1) on two new Windows 2003 servers, and I'm facing the same problem, even after some full re-installations, on both of them; so this issue seems to be some kind of bug related to Oracle 10g on Windows 2003 and not just some random error.
When I run the installation it completes fine, and the database instance gets created and started without any trouble; I can connect to it using the console, the Java stand-alone Enterprise Manager, SQL Plus or anything else; it works when connecting from clients, too.
As soon as the server is rebooted, Oracle services start but it just seems the instance isn't actually started: any connection is refused by the listener which complains about not knowing the supplied instance name, and the oracle.exe process only uses about 11 MB of memory, which is a sure sign it isn't doing anything useful. The instance is configured to start, the registry keys are properly set, and everything works correclty after the installation... but stops working after the first server reboot.
I tried manually stopping and starting the services, in various orders; I tried re-installing Oracle various times; I tried deleting and re-creating the database instance, both at setup time or manually after the setup was done without creating an instance, I tried anything I could think of.
The only thing I didn't try was applying patch set 10.2.0.3 to the installation, but I just can't seem to find them, even though my company has an Oracle partnership; I find Metalink just a bit too confusing.
Can someone please help?
P.S.
The servers are actually VMWare ESX virtual servers, but I just can't imagine this to be the cause of the problem. The operating system on both servers is Windows Server 2003 Enterprise Edition (not R2), italian language, with service pack 2 and all the latest updates from Windows Update. The servers are not domain members and I'm running the installation using the local Administrator account.

I don't have a physical server available now, but I really can't even imagine how the underlying hardware, be it physical or virtual, could affect this behaviour. I'm talking about the Oracle service starting while the instance isn't, this is very unlikely to have any relationship with device drivers.

Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Oracle 10g on Windows 2003: Can't start with any account but Local System

Fresh install of Oracle 10g on Windows 2003. I install as a member of the local admin group and everything works great. The various services are starting as Local System, though, and I'd prefer to set them up to start as a specific domain user account.
When I make that change, however, I can't get any of the Oracle related services to start. I've added this domain user to the local ora_dba group on my server, given it the ability to log on as a batch job and log on as a service in the local security policy. Doesn't seem to help.
I saw a thread that implied using a domain user account wasn't supported (didn't seem right to me, but what the hell), so I created a local user account and tried that. Same result.
Something I'm missing?
Thanks.

What is missing, I suspect, is reading the installation docs.
http://docs.oracle.com
If that doesn't work then come back and ask specific requestions referencing the appropriate document and naming the actual version you are trying to install (ps 10g is a marketing name not a version number).

Regarding Installation of Oracle 10g in windows Advanced 2000 Server

Similar Messages

Maybe you are looking for