Regarding IS IO and GAS

Hi
This is Mohammed vaseem khan, recently i am selected for on one implementation project on IS OIL and GAS,can any body tell me from where,i get soem knowledge in IS OIL&GAS, if any body having this so kindly send me links,from where i can downlode the IS OIL&GAS documents
Thanks in Advance
Best regards
Mohammed.khan

Hi,
You can get the info form sap.com and service.sap.com also with specific operation like IL GAS etc.
Anil

Similar Messages

  • SAP ECC6.0 & IS OIL And GAS

    Hi All.
    I have a doubt regarding the Oil And GAS. Is it possible  to Install the SAP Oil & Gas as an add-on in ECC6.0 or is it a separate software altogether.
    Please clarify.
    Regards,
    Raj.

    My Qualification is MSc(Geophysics)
    It is amazing that the world is still oval and not flat again.
    >cureently i am working on sap abap from past two years.
    You have also been a pain in the ABAP forums and still have 51 questions you have not followed up on.
    now i want to shift my career in to sap-is oil and gas.
    That is probably a good thing for ABAP.
    what is sap-is oil and gas.
    If I remember correctly, that is the way you started your career in ABAP as well... but the thrêad was deleted together with vaste number of others.
    what are the prerequisites for the sap-is oil and gas.
    Huge oil and gas reserves distributed redundantly, preferably on other planets which mirror the earth in case something goes wrong... (Swamy's Law)
    Good luck, take care and don't look back!
    Bye,
    Julius

  • Best Practice for Oil and Gas Field Data Capture

    Hi All
    What is the best practice to capture volume data of Oil and Gas commodities in SAP? There is a solution [FDC|http://help.sap.com/miicont-fdc] that address the requirements however what parameters it asks, whats the process and how it calculates different variables isn't provided over the resource center.
    Appreciate any response.
    Regards
    Nayab

    Hi Zack,
    It will be easier for you to maintain the data in a single application. Every application needs to have the category dimension, mandatorily. So, you can use this dimension to maintain the actual and plan data.
    Hope this helps.

  • Upstream documentation link/details in  SAP IS Oil and gas?

    Hi
    I was looking for some documentation on upstream activities (Exploration and Production) in the SAP IS Oil solution.
    The below link provides me the path to my SAP Oil and gas but not anything on upstraem activities:
    http://help.sap.com/saphelp_oil46csp2/helpdata/en/67/bfa73ad9ccf101e10000000a11402f/frameset.htm
    can somebody please let me know the path or any help on the same.
    Thanks

    Hi Rajiv,
    Please check this link.
    http://help.sap.com/saphelp_oil472/helpdata/en/ec/9d2c3adcc8431be10000000a114084/frameset.htm
    I hope this will solve your problem.
    Regards,
    Aditi

  • Need Role Design for Oil and Gas industry

    Hi All,
    i have a requirement of designing roles for Oil and Gas industry. Could any one share some material/link or overview on the same.
    if not all, Role Design on UOM is also fine
    regards
    Plaban

    Hi Mythily,
    If you already know something about explortion of oil, then you will find PRA (production and revenue acconting) interesting. This module deals with exploration of oil and gas and then distributing the revenue to owners.
    You can find detailed information in help.sap.com. Follow the link given below for PRA help:
    http://help.sap.com/saphelp_oil46csp2/helpdata/en/ec/9d2c3adcc8431be10000000a114084/frameset.htm
    Reading some of the material will give you more clarity whether you like it or not.
    And it is perfectly fine to have ABAP knowledge, that will help in going deep into Oil and gas.
    Rgds,
    Abhishek

  • Reg:Tickes in Oil and Gas Industry

    HI All,
    Any body working oil and gas Industry?. Plz send me some Samle Issues and Answers (FICO).
    regards
    JK

    HI All,
    Any body working oil and gas Industry?. Plz send me some Samle Issues and Answers (FICO).
    regards
    JK

  • SOLAR01 - BPR content for Oil and Gas - JVA processes

    Hello
    We are dealing with the creation of the structure (scenario, processes and steps) for a Oil and Gas project trying to use BPR.  In order to locate the right process we are dealing with Solution Composer, with configuration variants from the Oil and Gas Soluton Map.  We are not able to find any of those processes in the BPR.  We look any process with joint or venture words in it but there is none.  We have Solman 7.01, stack 25 and ST-ICO 150 level 27 (the latest available)
    Any suggestions?
    Regards
    Esteban Hartzstein

    Hi Vinay,
    This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
    Regards,
    Ashutosh

  • SAP OIL AND GAS Certification.

    Hello Consultants,
    Im working as an SAP FICO Consultant with double certification having an experience of 3+ years in Gulf Countries.
    Im planning for SAP Oil & Gas UPSTREAM Certification.
    I would like to have proper guidance from SAP Gurus regarding my choice and decision to undertake
    SAP IS Oil & Gas Certification.
    Also what are the job opportunities for SAP IS Oil and Gas Certified Freshers?
    Your comments will be highly useful to me.
    Regards,
    Sandeep M

    Hi,
    This is Aleem Abbas, please go to Ameerpet,Hyderabd. u learn IS-Oil and Gas......
    byee

  • Oil and Gas

    We' re implementing Oil & Gas and I would like to know where I can find Oil-specific sales and purchasing data? Which ones are the InfoCubes to have SD and purchasing info specific to IS-OIL.
    Thanks in advance.
    Patricia.

    I appreciate your help Jorge. I saw that documentation before, the only issue is for example in table vbkd that is a lot of fields starting with 0OI_* (means Oil and Gas module) that I can't find where they will be extracted for BI. The standard SD does not have this fields and lcan't find anything in  the documentation of Oil and Gas about this either.
    Thanks again!
    Regards and I still need help!
    Patricia.

  • Template implemntation for oil and gas business with business line of aviat

    “While standardizing processes across country for a oil and gas business which has implemented SAP ,do a standard template for a fuel business should be used or specific templates for  lubes, aviation business lines be used

    Hi Vinay,
    This entirely a business and consulting decision. In general its good to have different templates for bulk fuels, Crudes, Packed lubes/Gas, and aviation. This still depends on the volume of business in a particular line.
    Regards,
    Ashutosh

  • Transition to oil and gas

    Hello Gurus,
    I am presently an sap security consultant working in fortune 100 company. I am planning to shift myself to SAP oil and gas module. What are the requirement that I need to have to undergo this change. Can you guys suggest me how to go about this transition. Do i need to have a strong knowledge in FI for getting into oil and gas.

    Hi Avinash,
    Well with your SAP Security background, you can shift to SAP IS Oil, tech/functionl, but also depends on the domin area where you have worked.
    If you have a overview of the functional area and if you can comprehend the business flow,  then i would say can contibute in SAP IS Oil mudules, it would be more advantage to if you know both technical and functional area.
    Haveing said that you can decide which area to would pick up, as SAP IS oil comes with many modules such as HPM, MOC, TSW, EXCHANGE, TD, etc which has a significant combination of core modules of SAP.
    It does not require strong Finance background to get transition. if you the basic busines flow it is helpful.
    Best Regards,
    Satish

  • Oil and Gas Business process overview

    Hello experts,
    I am a SAP BW consultant, I am very much interested to know
    the business process flow in the Oil and Gas company
    so that i can explore before entering into the project.
    Hope you experts will help me out with some Good Stuff
    which give the details flow of the oil and Gas company
    as well as the table and T-code for this application.
    Thanks alot  in Advance.
    Regards
    KK
    Edited by: KK on Jan 28, 2010 1:46 AM

    Hi
    Please go throgh below link
    http://help.sap.com/saphelp_oil472/helpdata/en/13/9c063628742a09e10000009b38f839/frameset.htm
    http://www.sap.com/services/education/catalog/industry/globaltabbedcourse.epx?context=%5b%5b%7cTIOG10%7c%7c1%7c%7cG%7c%5d%5d%7c
    if this suffice please give marks
    Thank You
    Niranjan

  • Oil and gas (lubricant oil)

    Dear fico experts,
    I am new to oil and (gas lubricant oil) industry. We are preparing the documentation for the oil and gas regarding the benefits in SAP FICO module. Kindly help me to prepare the documents and if you have any documents regarding this please provide.
    Regards,
    Venkataswamy

    Recommend you connect with Stephane Lauzon - if you haven't already done so -  in our Oil & Gas Industry Solutions Management team responsible for this area of solutions and get connected with the customers and workstreams within the Integrated Digital Oilfield Operations community he co-manages with leads from the Industry at HESS and ConocoPhillips.

  • Is there a major flaw with Iphoto in regards to organizing and backing up?

    Is there a major flaw with Iphoto in regards to organizing and backing up? And how should I proceed??
    Here is my story. I have moved roughly 15,000 photos from 7 computers (4 PCs and 3 Macs - basically everyone's computer in the family) onto one external hard drive. The photos were taken by many different digital cameras, are sparsely labeled, and have the most random names and folders. There are a LOT of duplicates. MY MISSION - label and back them up.
    The way I normally deal with photos/DATA is this: I plug my camera into my Mac and immediately think about organizing and backing them up. With "Preview" I look at photos (and decide which one I like), create a folder called "where-ever I took these photos" and drag them into that folder. The problem with Iphoto is that you have no ability to control folders, unlike many other applications.
    For example, in Itunes you can rename an artist, or even an album, and it will automatically appear in an updated folder. If you alter a photo in Photoshop, it makes you save it is a new file. In Iphoto you cannot make the same "root level" changes without making duplicates. From what I understand, you can place photos into an Album and then export that album (which makes duplicates). Iphoto will rename each duplicate file and then place it in the correct folder. The problem here is I have no idea where the original is to delete it.
    Basically I want to create folders called "Trip to Italy 2003" or "Rachel's Wedding" and place all the photos associated with that event in those folders. The problem I run into is that I have a bunch of duplicates. I have heard of a program called Duplicate Annihilator which has gotten favorable reviews. If I import them into Iphoto all the photos are placed in random named folders. I say random because some of the photos were taken on cameras that didn't have the date set correctly. Hence some of my photos will appear in a labyrinth of folders called "Modified / 2001 / Roll 17 / DCM482 / Image25874654.jpg"
    I am totally willing to wipe my Iphoto library clean and start again if there is a way to organize the photos as described above. Eventually I will take these folders and save them on a data DVD.
    Thanks to anyone who can help.
    Gary

    You do not need to delve into the folders within the iPhoto Library via the finder to access any photo. That is all done within iPhoto itself. If you need a photo for use outside of iPhoto read Terence Devlin's treatise on file access. iPhoto is a DAM application - Digital Asset Management, not a folder manager. There's a big difference. You can use keywords, album and smart albums to organize your photos.
    If you still have the original files you might consider what I do. I rename each file with the date it was taken using the international date format: YYYY-MM-DD-001.jpg. You can download the demo version ofMedia Expression and automatically rename each folder of photos with the EXIF date and a sequential number. This makes chronological searching and sorting much easier both in iPhoto and the Finder.
    If you want to not only manage the photos but the folders then Expression Media will let you do both. It will let you rename files after being imported into a catalog, move them between folders, add ITPC metadata to the files, create virtual albums called Supplemental categories, and much, much more. I use it as my primary DAM and iPhoto for special projects like books, slideshows, calendars, etc.

  • Hi, i am having an issue with a basic motion scroll effect.  I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me-, probably he didn't unde

    Hi, i am having an issue with a basic motion scroll effect.
    I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
    please note, that i am new to muse, this is my first project ever.
    my idea is as following:
    when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
    so…..
    now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
    now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
    now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
    when i am scrolling down the WHOLE logo goes down…. so far so good.
    NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
    so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
    the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
    NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
    SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
    BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
    short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
    but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
    Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
    Thanks so much to everyone who actually reads this post and tries to help…….
    All the best,
    Niki Lapan

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

Maybe you are looking for