Regarding Issue when Exporting the Output of the Discoverer Report to Excel
Hi,
Can Any of you guys help me out in this issue. I am exporting the Discoverer Report Output to Excel sheet, I am able to export but while I am opening the excel sheet I am getting an error saying "UNABLE TO READ FILE".
Please help me out in this Issue, it is so urgent.
Thanks in Advance..
Raja.
Hi,
Is there any way to export the output of scheduled Discoverer Reports to a particular server using Discoverer plus.Only by openning and exporting each report manually.
is there any way to get the output name in a particular syntax. I want to concatenate date in the output name.Only by entering the filename when you do the export.
The best way to do this is to use Discoverer Desktop and a third party scheduler. Then you can export all your reports automatically and define the filename used in the output. Search this forum for more information on third party schedulers.
Rod West
Similar Messages
-
Hi there! So I am using Lightroom 3 on a pc and I have ran into an issue when exporting images. The DPI and image size (in inches) that I am selecting during the export process. For example I just exported a collection and set the dpi to 180 and the size to 7 inches on the long edge. My exported result is 457 dpi and sized at 3200x2134 pixels.. Any ideas on why this is happening and what I can do to correct it?
The DPI setting in a digital image has no meaning at all. You need to learn how to calculate what you need in your exported image. The only measurement in a digital image that has any meaning is the number of pixels in each direction. It doesn't matter what you set that DPI to (actually it's PPI or pixels per inch). The image will have the same number of pixels regardless of the setting. If you need an image that is 5 x 7" (for example) at 200 PPI then you would want an image that measured:
5 x 200 = 1000 pixels
7 x 200 = 1400 pixels
So you would need an image that is 1000 x 1400 pixels to have a 5 x 7" image at 200 PPI. The reason your exported image had such a high PPI setting is because you specified the number of inches you wanted the image to be. And there were enough pixels in the image that it calculated out to be that high PPI setting.
I apologize, I don't explain this very well. But you need to learn to do the math to determine how large you really want your exported images to be. -
All,
I attemped same using Cap 6: Issue when publish to PDF. The exit button on the skin does not seem to work. I switched out skins and same issue. I am using IE8.
When published as swf, exit button on skin works fine. Any ideas on solve for the PDF version exit button? We would rather publish as PDF since all files are contained in the PDF wrapper.Hello,
Welcome to Adobe Forums.
This issue is reproducble at my end, need to do some more testing before I can tell you any solution or action plan for this issue
Thank you for your patience.
Regards,
Vikram -
When exporting out of lightroom the color of my picture channges significantly
I use windows 8 and tried exporting out of lightroom through firefox and this did not help either
Hi Shmuglak. Thank you for the information. I tried those things but did not work. I just got windows 8 and just downloaded photoshop CC and Lightroom from the cloud. My settings in Lightroom under preferences are : Under jpeg preview it is checked on fast load data. Under external editing the color space is prophoto. Under additional external editor it is set to preset (Custom). Under Default Develop Settings the only thing checked is apply auto mix when first converting to BW. Under export module: Location: set to same as original folder and no check mark on add to catalog. Under Post Processing I have tried do nothing and tried firefox.
It is funny that when I export a picture from lightroom using firefox that picture pops for preview and the picture looks fine but then when I go to my email and try to email that same picture and use send with a file attachment the picture looks aweful on my desktop but when looking at it on the ipad or iphone the picture looks fine.
Any other suggestions would be great
thank you
Date: Thu, 12 Dec 2013 00:56:36 -0800
From: [email protected]
To: [email protected]
Subject: when exporting out of lightroom the color of my picture channges significantly
Re: when exporting out of lightroom the color of my picture channges significantly
created by shmuglak in Photoshop Lightroom - View the full discussion
I don't know if this is your case but I have a similar problem (and has been helped out by some kind soul on this forum). The change of color may happen if you are re-importing the exported pictures into the Lightroom catalog. If this is what you are doing, some import presets may be applied and this may cause the color change. I'm talking about this setting, sheck if it is enabled. If it is, disable it and see if it helps.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5923235#5923235
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5923235#5923235
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5923235#5923235. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
timeline issues - when i drag media back, the timeline becomes very large and out of whack! What is this in CS4?
You are in the wrong forum!
Premiere Pro CS4 & Earlier -
Alignement issue when exporting to PDF
Hello,
I'm having some alignment issues when exporting an InDesign file to PDF.
I have a couple of square pictures, touching eachother at the edges. These are aligned bang on in InDesign (the lines overlap), but when exporting to a PDF and viewing in there, it seems that some seem to jump up slightly.
Is this just a display issue or a setting issue when exporting to PDF?
Thanks
BennyThe detail is cropped too tight for me to tell how many photos are intersecting there. Is there a vertical intersection as well? If not, I think you're looking at a very slightly non-rectangular frame, if there is, then you might still be looking at a non-rectangular frame, or the frames are not perfectly aligned, which doesn't surprise me if you snapped to a guide -- I find that less than 100% reliable since CS6.
Presuming that you've zoomed in to show us the problem, that's probably a single pixel misalignment and you'd be very hard pressed to see it in printed output without a loupe.
You can check the bottom edge of the top photo, and the top edge of the bottom photo(s) for being out of horizontal by using the direct select tool to select the corner points and seeing if the y-coordinate is the same on both sides of the frame.
My printer tell me to always overlap frames, rather than butting them, for trapping, for what that's worth, but I don't always do what he says, and I've never had a problem. -
Is it Possible to display the output of the ALV list as POP-UP
Hi Experts,
Is it Possible to display the output of the ALV list as POP-UP, if yes then provide some ideas on it.
thanking in advance,
Samad.Hi samad, it is possible to display alv list as pop-up by using the FM " REUSE_ALV_POPUP_TO_SELECT"
try this sample code
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = P1_TITLE
I_SELECTION = 'X'
I_ZEBRA = 'X'
I_CHECKBOX_FIELDNAME =
I_LINEMARK_FIELDNAME =
I_SCROLL_TO_SEL_LINE = 'X'
I_TABNAME = 'T_VBAP'
I_STRUCTURE_NAME = 'T_VBAP'
IT_FIELDCAT = T_FCAT2
I_CALLBACK_PROGRAM = 'ZTEST_ALV_POPUP'
IMPORTING
ES_SELFIELD = I_SELFIELD
E_EXIT = W_EXIT
TABLES
T_OUTTAB = T_VBAP.
i think it will solve your problem
Regards,
Vijay -
How to get the output of a standard report RFBILA00 in PDF form.
hi,
I have to get the output of the standard report RFBILA00 in the PDF form.
Thanks.Hi Rao,
you can run your report RFBILA00 in background and in background job you can add one more step, next in that step you can add custom report like zsubmit .
job should be set like
step1: RFBILA00 with variant.
Step2: zsubmit report with variant.
In Zsubmit report you can read, your first step spool using FM GET_JOB_RUNTIME_INFO
and pass that spool in the FM CONVERT_ABAPSPOOLJOB_2_PDF.
when second report run in job you can set your target like download in the server or send email etc.
Regards,
Prasenjit -
To get the output in the chart for a single selection
Hi all,
I used a query to get the output of the table, and for the same query i have created a view to get the result in the chart.
to get the output of the table for a particular region i have created an input field and added value help to it. When i selected one particular region, i will be getting the data, in the table. But when i select a particular row in the table i need to get the data of that particular row only in the chart. (which i am getting)
But when i select multiple regions at a time, then i am facing the issue. I get result of multiple regions data(at a time two rows are displayed in the chart) in the chart. where in i want to get data only for one region (only one row needs to get selected at a time) to get the result.
Can any one throw a light of what needs to be done here.
Thanks,
RaniHi Rani,
I am not sure if I understand your question exactly, but it sounds like you need to set the selection mode for your table to "Single". If you do that the user will only have the possibility of selecting one row at a time in the table; they will not be able to select multiple rows.
You make that setting in the Configure Element panel for the table.
I hope this suggestions helps.
Margaret -
How to send the output of the 1st BPEL process as a input to 2nd BPEL Proce
Hi,
I am working on OBPM 11G and my requirement is like below,
From Mediator we need to call two different BPEL process. 1st one is Synchronous one and second one will be a one way interface. We need to call a java call out from Mediator and then give the output to the first BPEL process. The output from the first BPEL process has to be given to the second BPEL process with a filter condition.
However we have achieved to call Java callout as well as call to two different BPEL process but facing issues in sending the output of the first BPEL process as a part of input to the second BPEL process.
Any help on this would be appreciated.
BibhuHi,
Why do you need the third step, if the second step is a Numeric Limit Test step type, you can setup the limits of this step for your required limits of 11V and 12V. Your result is returned from your VI to Step.Results.Numeric which will be evaluated in the Status Expression giving you a Pass / Fail status.
Look at the example TestStand\examples\demo\..\Computer Motherboard Test\computer.seq
But to answer your reoriginal question, some additional information is required.
What are your inputs and outputs assigned to in TestStand, do you use the Step properties, Locals, FileGlobals?
Regards
Ray Farmer
Regards
Ray Farmer -
Problem displaying the output in the same view
hi Gurus,
I have developed an web dynrpo application and have three views, in the first view I am having an input field from which I am calling a BAPI by giving that input field value as input to the BAPI.
Now is it possible to display the output also retrived from the BAPI on the same view.
Thanks and regards
krishi LM,
Thanks for your fast response.
I think I was not clear in explaining my problem.
I have a view in which I have an input field which is the input to the BAPI, now on entering the value in the input field I have a submit button, on clicking the BAPI should be executed and also the the output should be displayed on the same view.
Now regarding the mapping both the input and output are in the same context, would that a problem.
And also after getting the output from the BAPI I have to do some validations based on the output from the BAPI and get some message printed on the view.
Please help me in this issue.
Thanks and regards
kris -
Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
GabsiHi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi -
EXIT/BADI for enhancing the output of the transaction S_ALR_87013532
Hi,
greetings to all!! I have a problem here guys-I need to find any exit or badi for enhancing the output of the tcode S_ALR_87013532.This tcode is used for seeing the planned/actual/variance of project cost.
In the output we have got 3 columns-total of years, previous years and 2009. Under each column we have Plan, Actual, Variance and VAR %. Our requirement is to show Functional Location(PRPS-TPLNR), Budget Number(TCN01-SWRT0), SBU (TCN01-SWRT1) and Region (TCN01-SWRT2) in each of the clolumns-you can also get the last 3 fields in PRPS table as USR00, USR01 and USR02.
Can anyone help please?could not find anything worthwhile on SDN. Thnx a lot !Hi,
Check these User-Exits..
Exit name Short text
KAHFEX01 Selection data for commercial reporting in PS
KAP10001 PS: Hierarchy Reports for Projects
KAP60001 PS: Export Project Key Figures into R/3 EIS
Also check the BADI
WBS_USER_FIELDS_F4
Regards
Raghu
Edited by: Raghavendra Rao G on Sep 2, 2009 12:26 PM -
How do I get rid of memory issue when exporting in imovie
How do I get rid of memory issue when exporting in imovie?
Delete the content that is filling it up. Text messages, iMessages, SMS, emails, Safari Cache; essentially all data for all of the built in apps.
-
Display of check box as the output in the ALV
Hi Experts,
Please guide me with the steps of displaying the check box as the output of an ALV report
thanksHi,
Check this program: BALVSD01.
Check this code:
*& Report ZAK_ALV
REPORT ZAK_ALV line-count 10.
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ck type c,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'CK'.
fieldcatalog-seltext_m = 'CHECKM BOX'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-CHECKBOX = 'X'.
fieldcatalog-EDIT = 'X'.
fieldcatalog-key = ''.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
fieldcatalog-checkbox = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 100 rows
from ekpo
into CORRESPONDING FIELDS OF table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Maybe you are looking for
-
Crash in develop module RAW files with sidecar files from Lightroom 3
The issue probably has to do with the differences in settings between the two versions but I figured I would document what I am experiencing. I am using the 64 bit version of Windows 7. I imported a group of pictures with the XMP sidecar files gener
-
Bridge doesn't allow me to turn on color management
Any idea why Bridge doesn't allow me to edit/turn on color management? When I go to Edit>Creative Suite Color Settings I just get an error. Says I must launch at least one qualifying CS product. As I have Dreamweaver CS5.5 and PS CS5 running I never
-
Why Won't This AVI File Copy?
Sometimes I try to copy an AVI file onto an external USB or to my Apple TV. Every once in a while I get one file that starts out copying, but then I get an error message saying it "could not be read or written. (Error code -36)". The file names have
-
Upgrade from Photoshop Elements 4.0 to 12.0
I purchased Elements 4.0 many years ago, and I am considering using this again. Unfortunately, I can't use this version on OS 10.9 so I know I need to upgrade which I am prepared to do. But can I qualify for an upgrade based on this old software? K
-
RMAN Backup Doubt...
Hi all, I have set up RMAN Backup in my system which takes daily full backup as it is Standara Edition 9i. My db size is 35GB. As is see in the backup folder that there are three backup files each of 35GB. I don't know why there are three peices. I h