Regarding Link Utilization Reports

Hi All,
I have installed Whatsup gold version no 11 to Monitor Network as well
as Server devices. My query is im not able get Internet link reports
even i don't know how to configure Router to get Link Utilization
Reports and what need to configure on router to enable this Service.
Kindly help me to achive this Challenge.Farook
Farook,
You need to configure snmp server ip address (what's up gold ) in router with community sting which is configured in server.Check out the below link for insatllation guide on whatsup gold for help !!
http://docs.ipswitch.com/NM/87_WhatsUp%20Gold%20v14.1/02_Guides/WhatsUp%20Gold%20v14.1%20Getting%20Started%20Guide.pdf
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Similar Messages

Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Hi Experts,
We are getting blank Performance reports after upgrading to SCOM 2012 R2. Can anyone provide fix for this issue?
All the reports are working fine except Performance by system and utilization report.
Thanks in advance.
Regards
Karthick Malayalan

Hi Karthick,
Here are two links for your reference regarding to the blank report issue:
SCOM 2012 performance by system report and perform by utilization
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
Empty?
http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
Yan Li
Regards, Yan Li

CTM - 15454 reporting report utilization reports needed

I have many Cisco ONS 15454's deployed, and I need a way (I presume from CTM) to
run reports to show
1 - Circuit utilization (how many STS-1's and for which clients are provisioned on all spans)
2 - Capacity report (how much capactiy in STS-1's are available on all spans)
It is too time consuming to manually export circuits provisioned from each span when the
network changes constantly, and the number of nodes too. This leads to constantly out
dated spreadsheets and inacurate data on capacity, utilization.
Basically I need to run reports against all things circuits on the ONS boxes.
I would be willing to use 3rd party software too, which would talk with CTM I presume?
Who else has this issue?
--Scott

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Hello Scott,
You may automate this by directly querying and parsing Oracle CTM database. I don’t have a ready to use script but here is an idea.
For example link utilization is kept in Link_Utilization_View and links are kept in Link_Table.
Database Schema Tables
http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/db_schema/developer/guide/90sctbl.html#wp2576140
Database Schema Views
http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/db_schema/developer/guide/90scview.html
Here is how to get this information is html formatted file:
su – oracle
sqlplus ctmanager/ctm123!
SQL> spool /tmp/links.html
SQL> set markup html on
SQL> select * from link_table;
SQL> select * from Link_Utilization_View;
SQL> set markup html off
SQL> spool off
Now the information is in /tmp/links.html which you can parse.
En example from my net. let’s take a span between Node 14 port 6/1 and node13 port13/1:
bash-3.00# su – oracle
Blowfish% sqlplus ctmanager/ctm123!
SQL*Plus: Release 10.2.0.3.0 - Production on Thu Nov 4 14:33:51 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL>select LINKID from Link_Table where LINKNAME='Node14:6/1 - Node13:13/1';
    LINKID
        35
SQL> select CKTTYPE,CKTSIZE,CKTUNIQUEID,CKTNAME from Link_Utilization_View where LINKID='35';
   CKTTYPE    CKTSIZE CKTUNIQUEID CKTNAME
         1          1          11 BRT
         1          1          11 BRT
         1          1         114 Link2
         1          1         114 Link2
======================
CKTTYPE 1 is STS_CIRCUIT and CKTSIZE 1 is STS1 (from Database Schema Tables). Hence i have 2 STS1 circuits on that span.
Regards,
/A

Create a site utilization report for SharePoint Site with these conditions

HI,
How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
a) The list of users who are accessing the site
b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
c) When was the last date the user has accessed the site

Hi Kalpana,
Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
You can get site collection / sub site user details via
SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
Let us know if this helps
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Capacity utilization report (Labour)

Hi
We are developing workcenter capacity utilization report.
We have taken available capacity from KAKO table and function module.
Actual finished set up hrs we are taking from AFRU -ISM01/ILE01
My issue is for capturing confirmed set up hrs AFRU is the correct table or any other table is there.
when i am testing some production orders set up time values are not flowing into the developed report.
In which table we can see confirmed set up/processing times etc.
regards,
srihari.M

Dear
Check the Work Centre assingin in the operation overview screen -then double clcik on this -Goto Work Centre Basic data Tab -Check the Standrda Value Key -Stndard value drives the three Setup , labout , machine to be entre or must be entred or not .
If Rule for maintainec is not for Set up , then this will not come up in Confirmation screen also and hence in your customised report .Or you may be having Set up hrs which have not confirmed yet .Based on this SVK , you will choose the Formula key for Scehdule , capactiy and also Csoting tab to calcuate the same.
Check this and come back
regards
JH

Link in report with SSP enabled

Hey everyone, I have a question here involving programatically generated links in reports from the sql query behind them. How do I make a link to the page (from the report's sql query) that will allow me to change the value of a hidden and protected item (P16_PERSON_CONTACT_ID) without having APEX Session State Protection get angry at me and still protect me from having the user muck with the URL?

David,
Well bind variables are more performant and safer to use in queries. It shouldn't really be a debate on when to use them, you always use them when you can. Here's a quick break down (not a complete list, and should probably be expanded, but should get you going)...
Use bind variable syntax when you're referencing an item:
1. In a report query
2. In PL/SQL code that is stored in the application (as a page level process for example)
Use substitution variable syntax when you're referencing an item:
1. Outside of SQL and PL/SQL but still need the value - this is not always an option (in the HTML Header region of a page or title of a region for example)
Use V and NV functions when you're referencing an item:
1. In PL/SQL code stored outside the application (in a package for example)
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
Edited by: Dan McGhan on Apr 29, 2009 11:01 AM
Replaced "database" with "application"

Link in Report does not work when run on Citrix

Hello,
we use Crystal Reports (v11) for creating Reports.
Data is based on our CRM system "SuperOffice".
We have several reports and what we did is to add a column that includes a link to SuperOffice.
For example - if I have a list of contacts as a report, then every line has a link to SuperOffice.
If I click this link, the contact in SuperOffice gets open.
This works on lokal pc installations.
But is doesn't work on a citrix server.
If I click the link - nothing happens.
Is that a known problem or does anyone have any ideas for that?
Are there any known problems with links in reports on citrix servers?
Thanks in advance.
Best regards,
Tony

Hi Don,
thank you for fast response.
That is a good advice. We will check that.
The main question is, to which folders etc. does CR needs access?
To explain the situation better: To run the reports we use Crystal Reports Runtime (Version 11.1.1883).
Do you (or anyone else in these forum) know where we could get information about which kinds of access CR Runtime needs to handle with these links?
Regards,
Tony

Steps to link a report to Web Application Form. Post Your Opinion

Hi friends,
After going through it what is your opinion. please do post your opinion.
Could any one give the complete steps of Linking a report to web form so that when called / clicked the link the report can display the data.
I have unchecked the "Report Option -> Save Data with Reports". So that the report could not take extra space.
I have DB connection code in my .aspx.vb file, it is as follows:
Private Sub ConfigureCrystalReports()
Dim fileName As String = "Reports\" & ReportID & ".rpt"
Dim reportPath As String = Server.MapPath(fileName)
myRepDoc = New ReportDocument()
myRepDoc.Load(reportPath)
myCrystalReportViewer.ReportSource = myRepDoc
myCrystalReportViewer.RefreshReport()
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
If Session("reportConnectionInfo") IsNot Nothing Then
Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
myConnectionInfo.ServerName = ConnInforArrList(0)
myConnectionInfo.DatabaseName = ConnInforArrList(1)
myConnectionInfo.UserID = ConnInforArrList(2)
myConnectionInfo.Password = ConnInforArrList(3)
Else
lblMessage.ForeColor = Drawing.Color.Red
lblMessage.Text = "Session is off. Please Relogin to See the Report."
End If
SetDBLogonForReport(myConnectionInfo, myRepDoc)
SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
myCrystalReportViewer.SelectionFormula = GetFieldName(ReportID) & "='" & Session("CompCode") & "'"
myCrystalReportViewer.Visible = True
End Sub
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = myConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
Private Sub SetDBLogonForSubreports(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim mySections As Sections = myReportDocument.ReportDefinition.Sections
For Each mySection As Section In mySections
Dim myReportObjects As ReportObjects = mySection.ReportObjects
For Each myReportObject As ReportObject In myReportObjects
If myReportObject.Kind = ReportObjectKind.SubreportObject Then
Dim mySubreportObject As SubreportObject = CType(myReportObject, SubreportObject)
Dim subReportDocument As ReportDocument = mySubreportObject.OpenSubreport(mySubreportObject.SubreportName)
SetDBLogonForReport(myConnectionInfo, subReportDocument)
If myReportObject.Name = "Subreport1" Then
Dim lvSec As Section = subReportDocument.ReportDefinition.Sections("DetailSection1")
If Not lvSec Is Nothing Then
Dim t1 As TextObject
t1 = lvSec.ReportObjects("txtEmpName")
t1.Text = Session.Contents("EmpName")
Dim t2 As TextObject
t2 = lvSec.ReportObjects("txtRepID")
t2.Text = Request.QueryString("REPID")
End If
End If
End If
Next
Next
End Sub
Please do help me out as the data of report is not getting displayed on the report.
After going through it what is your opinion. please do post your opinion.
While creating the Report has the following Report Options on / checked.
1. Database Server is Case-Incensitive
2. Use Indexes Or Server For Speed
3. Verify on First Refresh
4. Show Preview Panel
5. Display Alerts on Refresh
6. Select Distinct Data for Browsing
Do I have check or uncheck any other option?
Thanks and regards
Edited by: Md. Mushtaque on Sep 6, 2008 2:50 PM
Edited by: Md. Mushtaque on Sep 8, 2008 9:27 AM
Edited by: Md. Mushtaque on Sep 8, 2008 12:14 PM

Sir AG,
Thanks a lot for replying and spending your valuable time for my problem.
Sir, I just want to put this in your knowledge that my application is web based application and I am calling these reports through web forms i.e. of ASP.NET coded in vb from .aspx.vb files.
So as per the code I have attached, I have this
Option Explicit On
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Next for ReportDocument Object:
Dim fileName As String = "Reports\" & ReportID & ".rpt"
        Dim reportPath As String = Server.MapPath(fileName)
        myRepDoc = New ReportDocument()
        myRepDoc.Load(reportPath)
        myCrystalReportViewer.ReportSource = myRepDoc
Above is the code used by me in Page_Init and I have already tested it from Page_Load. I have got few suggestions from this forum that I should put this code in Page_Init only.
Lastly:
The database connectivity code:
Dim myConnectionInfo As ConnectionInfo = New ConnectionInfo()
        If Session("reportConnectionInfo") IsNot Nothing Then
            Dim ConnInforArrList As ArrayList = DirectCast(Session("reportConnectionInfo"), ArrayList)
            myConnectionInfo.ServerName = ConnInforArrList(0)
            myConnectionInfo.DatabaseName = ConnInforArrList(1)
            myConnectionInfo.UserID = ConnInforArrList(2)
            myConnectionInfo.Password = ConnInforArrList(3)
        Else
            lblMessage.ForeColor = Drawing.Color.Red
            lblMessage.Text = "Session is off. Please Relogin to See the Report."
        End If
        SetDBLogonForReport(myConnectionInfo, myRepDoc)
        SetDBLogonForSubreports(myConnectionInfo, myRepDoc)
SetDBLogonForReport(myConnectionInfo, myRepDoc)
Private Sub SetDBLogonForReport(ByVal myConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
        Dim myTables As Tables = myReportDocument.Database.Tables
        For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
            Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
            myTableLogonInfo.ConnectionInfo = myConnectionInfo
            myTable.ApplyLogOnInfo(myTableLogonInfo)
        Next
    End Sub
This code I have got from a sample of the forum itself.
Sir, after all these effort and the unchecking of option "Save Data with Report" on calling the reports from my forms it is showing blank report. No data from the database is coming form the database.
I have uncheked the option "Save Data with Reports" to get the updated data each time the report has been called but now the status is that nothing is coming.
Thanks again for you precious and valuable effort to help me but the my problem is unsolved, So sir please if you could put an eye on it and help me out to get rid of this problem, I will be very thankful to you for your kind help.
Thanks and regards
Mushtaque

LMS 4.2.3 Query on Interface utilization report

Hi All,
Interface Utilization report displays the interface utilization data for each device polled for the Interface Utilization
template. The information is presented using the percentage specifier.
For eg its displayed % (Rx Max%,Rx Avg%,RxMin%,
Tx Max%,Tx Avg%,TxMin%)
I wants report should have the data(interface utilization In Bytes of data)
Can we display the data instead of the percentage?? is it possible ???
Regards,
Channa

Hi Channa,
log into dbreader using the following::
http://servername : 1741/dbreader/dbreader.html
or
https:// servername : 443/dbreader/dbreader.html
user Id is DBA
Database Name is upm
password :: user defined (by default password is c2ky2k)
1. Here is the query to get the pollerwise managed MIBObjects:
"select count (*), PollerName from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId = b.PollerId and b.Poller_State NOT IN (1) Group by b.PollerName;"
2. Here is the query to get the total mibobject count for the active pollers
“select count (*) from Poller_Details_Table a,Poller_Definition_Table b where a.PollerId =
b.PollerId and b.Poller_State NOT IN (1);”
Hope it will help
Thanks-
Afroz
***Ratings Encourages Contributors ***

Linking BW report outputs with VC story board output

Hi Everyone,
I have a scenario where I have display list of report names in VC output screen and I have to link these texts with few BW report outputs.
This can be achieved in WAD using HTML coding by linking the report's URL, how can we do the same in VC. My customer wants in such a way that the report has to open in a different window in VC.
I checked even in SDN where I didnt find the exact answer.
Can any one help me out to achieve task.
Regards,
Chan

Dear Pradeep,
I have checked the document which u have suggested me, it is really helpful. But still i need some specefic inputs.
My client has already developed these dashboards in WAD but now they want everything in VC. Here no interference of WAD.
Let me explain you what I exactly want ...
In VC output screen I want to display the list of report names ( Hard coded ), when I click on these reports (I mean text eg: sales analysis), it has to take me to the sales analysis report output in a different window or may be in same window.
Now displaying this text and linking it with the Query designer report output is my confusion. Can u guide me to achieve this. (Here, No interference of WAD)
Regards,
Chan

Linking BI report for Account

Please help me in this regard
I have created a BI report which need to be called like the Fact sheet in Accounts in PCUI.
I am unable to find a way to link this report to the Account.
Can some one give me any inputs.
regards

Hi,
There are many reports with S_ALR with starting. That is the reason I gave *. Please go through the below path in SAP Easy Access. You can see the reports related to GL.
Accounting
Financial Accounting
General Ledger
Information System
General Ledger Reports
There you can see different group of records. You can use as per requirement.
BR
Ranga M

Hot links to report listing journal entries for an account

Hi Experts,
We are going live soon with BPC-NW and have some questions regarding BPC-Excel reports, all done with EVDRE() function. Our BPC service pack level is 05, we are using Excel 2007 SP2 for the client and BW 7.01 ABAP Stack (Enh Pack 1) on the server side.
We want to produce an Excel standad report with hot links to a report listing journals entries, passing it a parameter (account) so the report would list all journals and their entries for that account, and, so far, we haven't been able to find out how to do it.
We tried using buttons and associate them with macro MNU_eJOURNAL_REPORT but it doesn't open the report journal by account directly and doesn't seem to accept any parameters.
Has anyone found a way to do this?
Best regards,
Joao

Hi Peter
Thanks for the quick reply.
Yes, we do manage our stock by warehouse. I went to admin->setup-> stock-> and then 'item groups' and 'warehouses' and checked the accounting tab. In both cases the 'Sales return Account' is marked as our stock account. Are there more hidden places I can look? Thanks
Andreas

No link to report purchased app problems

I just got another iTunes email that confirmed my purchase. It was for an App Add on that was supposed to be Free. The title in the app add-on also uses the words FREE TODAY but I was charged 99 cents. So I followed the link which opened iTunes and followed the REPORT A PROBLEM link.
From there I have spent nearly 45 min going round and round on the Apple Support Site. If I click somewhere and then select NO to the question of "Did this solve your problem?" the window closes but offers no form to report the problem.
Does anyone know of a direct link to report an App Purchase problem to Apple? Even if the App was misleading and was really $0.99 instead of Free, it would be nice to know whether or not Apple has a means to be contacted regarding errors in App purchases, or if I will just be hung out to dry.
Sandi in MT

"t NO to the question of "Did this solve your problem?" the window closes but offers no form to report the problem. "
You should see the Express lane button. You can contact them from there.

Link between reports and universes and universe name change

I want to change a universe name.
What is the impact on my WebI reports and DeskI reports ?
Is it risky ? Will the link between reports and universes be saved ?
Does someone know how the link between reports and universes works for WebI reports and DeskI reports ?
Thanks

Hello Umberto,
I recommend to post this query to the [WEBI|SAP BusinessObjects Web Intelligence; and [DESKI|SAP BusinessObjects Desktop Intelligence; forums.
These forums are monitored by qualified technicians and you will get a faster response there.
Also, all Webi and Deski queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

How to link Crystal report to SBO layout print, like AR invoice?

Hi,
I am trying Crystal Report to work with SBO now; However, I dont know how to link Crystal Report to print AR invoice, sales order etc.; Is it possible to link Crystal with SBO document print layout?
Thank you!
Regards,
Jerry Huang

Hi jerry ,
It's nice that u found the answer, and thanks a lot for sharing the solution .
Please mark ur question as answered.
Rgds,
Premraj

Regarding Link Utilization Reports

Similar Messages

Maybe you are looking for