Regarding LO_OBJID field of table DMS_DOC2LOIO...

Gurus,
I am new to DMS and spposed to achieve a given scenario. I have system connection established succesfuly as follows.
Filenet -> ACSAP -> SAP DMS.
So whenever I create original document while creating a DIR in CV01N, I choose it from the desktop. Then when I click on checkin, it asks me for storage category and then I it gets saved in content server (here filenet).
I assume that only when I am checking in the document, the doc archive ID will be created. So the LO_OBJID field in table DMS_DOC2LOIO will get populated with archive doc ID of the content server.
But I am seeing that the field LO_OBJID gets populated even when I just create the original document from the desktop. So how the LO_OBJID of the DIR is linked to actual archiv doc ID in SAP.
Please help.
Regards,
Rajesh.

I think i have the same issue , can you tell me how to solve the issue ,
thank you very much

Similar Messages

Open T-code on double click of field in table maintenance

Hi Gurus,
I have one scenario, I have to show a transaction on double click event on a field of Table Maintence.
Please guide me in this .
Is there is any event in Table Maintenance Events to capture double_click of a field.
Regards,
Sowmen

1. In the field attributes of the particular field there is a chechbox in display tab which says respond to double click, check that.
2. Assign the fuction code "PICK" for function code F2 in GUI status.
3.Now whenver you double click the field function code "PICK" gettes triggeed.
Now you can wrie yyou code based on this function code.
CASE sy-comm.
WHEN 'PICK'.
*If you want the name of the field and the value in that field use the below code.
GET CURSOR FIELD gv_field VALUE gv_cursor_value.
*DO your operation based on the field and the value.
ENDCASE.
Regards,
Smithesh

Field and Table for PGI status updation

Hi All,
I want to know in which field and table the PGI status will get updated.
i.e. once we do the PGI for a delivery in which table will this PGI status gets updated.
Thanks in advance for help.
Harini

Hi Harini,
In Table VBUK you 3 different status related fields for sales documents.
Over all status field name GBSTK ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its complete open)
B Partially processed     ( This means the sales doc is partially processed)
C Completely processed ( This means the sales doc is completly processed)
Delivery status and over all delivery status field name LFSTK and LFGSK respectively, these 2 fields will be same always ( here it gives the total status of praticular sales document) here you see options
A Not yet processed      ( This means its completly open)
B Partially processed     ( This means the delivery doc is partially processed)
C Completely processed ( This means the delivery doc is completly processed)
So overall status can be different then delivery or overall delivery status.
If sales document has 100 quantity for 1 material, if delivery is done for 50 quantity.
Then over all status field name GBSTK will be B Partially processed and delivery and overall delivery will be C Completely processed .
Regards
vK

Field and Table name for purchaser

I want to know the field and table name for purchaser id and purchaser name.
Plz help me.

Dear
Purchaser name are define in Header level data in Purchase Order EKKO & Purchase ID define as a Purchasing Group
Purchser Name EKKO-ERNAM
Purchase I D EKKO-EKGRP
Regards
Aamir

Storage Location Wise Stock Value field and Table

Hi ,
Please let me know the storage location wise stock value field and table.
Regards
Suresh

Hi Suresh,
As per my understanding it is not possible in a single Table.
If this is required for customized Z report then use this logic it may gives the correct information.
In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
It may usefull to u..in the mean time i will try for some other option.
Please revert if u have any query.
Regards
Durga Sana

Purchase Order released date field and table name

Hi,
Please tell me the Purchase Order released date field and table name.
Regards
Deepak

Hi,
Table : EKKO.
Fields : FRGKE,FRGZU.
You can get release date of PO from CDHDR table.
give object value as your po number and check.dont forget to give leading zeros.
The udate will be date field and transaction will be me29n for relaesed po.

What is the field and table name to describe -Employee Hourly Rate or Emplo

Hi,
Can any one please tell me what is the field and table name to describe
Employee Hourly Rate or Employee Rate.
Thanks for ur time.
Murali.

Hi Murali,
The hourly rate is tied to a Wagetype & maintained in Infotype 0008. The database table is PA0008.
the field could vary depending on the No of wagetypes maintained.
regards,
Suresh Datti

Keyfigures source field and table in R/3

Hi,
Can anyone suggest or send what are source field and table in R/3
Serv. Hrs     Serv.@BR     Serv.Disc.     Adjustments     NSR     Calc. Disc.     NSR/Hr     "Prior Yr
Serv. Hrs"     "Serv Hrs
Variance"     "Serv Hrs %
Variance"     "Prior Yr
NSR"     "NSR
Variance"     "NSR %
Variance"     "Prior Yr
Calc. Disc."     "Calc. Disc
Variance"     "Prior Yr
NSR/Hr"     "NSR/Hr
Variance"     "NSR/Hr
Variance %"     Net Services AP     Calc.Disc. AP     Std Rate AP     Rev/Hr AP     Expenses Incurred AP     Hours YTD     Gross Serv. YTD     Net Services YTD     Calc.Disc. YTD     Std Rate YTD     Rev/Hr YTD     Expenses Incurred YTD     Hours LTD     Gross Serv. LTD     Net Services LTD     Calc.Disc. LTD     Std Rate LTD     Rev/Hr LTD     Expenses Incurred LTD     "Equalization
Adjustment
AP"     "Unbilled
Adjustments
AP"     "Closeout
Adjustment
AP"     "Total
Adjustments
AP"     Unbilled Adjustment     Close-out Adjustment     Other Adjustments     "Net Rev
Actual"     "Net Rev
Plan"     "Net Rev
M(L) Plan"     "Net Rev
Prior"     "Net Rev
M/(L) Prior"     "Net Rev
Growth Rate"     "Net Rev
Period Plan"     "Net Rev
Remainder
to Achieve
Plan"     "Net Rev
% of Plan
Achieved"     "Prior Year
Period %
Net Rev"

Dear Sridhar,
Are you dealing with DataSource to extract data ?
If so...
gotoST05
Switch on the SQL Trace
Come to RSA3
Execute your DataSource
Goto ST05
Swicth off the Trace
Analyze Trace File...u will get the Table and Field names..
Regards,
Ram.

UCCX What field and table of the UCCX database contains the max time to answer a call?

What field and table of the UCCX database contains the max time to answer a call?
Also when performing an aggregate function on CSQ queries do I group on target id? Is that the unique identifier?

Hi Christina,
Please find the information of the UCCX DB schema in the following table:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85dbschema.pdf
Regards,
Arundeep

R3 field and table names

Could someone kindly tell me where in BW I can find reference to the correspnding R3 field name and table.
Thanks & regards
Tina

To find the table where the field exists -Easy ways first check for the datasources at http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm as Rasim suggested.
If that really doesn't help you have to have a look at this Excellent blog by Roberto Negro : /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
You can run a trace in ST05 with RSA3 on n check wot tables is d datasource reading.

Want field and table name for RESERVED coloum in MMBE

Hi ,
        There is a RESERVED coloum in MMBE and     I want this   * RESERVED* coloum in MB52   .
       I got to know that Field related to this RESERVED coloum is BDMNG coming from table RESB .
       To confirm the field and table I checked the value in BDMNG by putting join on MARA and RESB where MATNR = BAUGR.
        But I got value in BDMNG is 50 and in MMBE it is .228 for that material.
           Please tell me field and table name for RESERVED coloum. and hoe to join MARA and RESB to get exact result.
Thanks and Regards,
Ranu

Hi,
Mara-matnr is not equal to Resb-matnr and it shows no record if i do like this.
But Mara-matnr is equal to Resb-baugr, and it gives me 1 record .But porblem is that i dint get BDMNG field matching with mmbe RESEVERD coloum.

Reg:field and table name

Hi Guys,
I am developing one report for knowing the recognised amount ,but i am not able to get the field and table name .In system it is showing that VBRAV51HD:RVAMT_REAL_G.But this is a structure,how to get a field name for recognised amount.Please help.
Thanks & Regards,
Sash.

Hi sash,
I think u need to some R n D upon it. First take the structure and open it in SE11. Then try to find out what all tables does the structure comprises of. Then try finding the relevant fieldname of the table( which is also existent in the structure) getting accessed when the field is triggered. That may solve your problem. try finding the objective of your structure being shown.
Abhijit

Reference field and table for AUFK for F4 help in alv.

Hi All,
   I need to put F4 help on ALV for order no (AUFK) what is the reference field and table for that?
i tried giving field as aufk and table as ccss but its not working.
   ls_fcat-ref_field = 'AUFNR'.
    ls_fcat-ref_table = 'CCSS'.
Thanks & Regards,
Ruchi Tiwari

Hi,
Try this.
Set the f4 help for the field in the fieldcatalog
ls_fcat-f4availabl = 'X'.
1. Create a event of ONF4 for the alv grid.
2. Set the event handler.
3. Append the field for the F4 help in the internal table and call the below method
    CALL METHOD g_mprn->register_f4_for_fields
    EXPORTING
      it_f4 = i_f4.
4. create a class definition and implementation
    refer sample pgms (BCALV_F4, BCALV_GRID_EDIT_DELTA and BCALV_GRID_EDIT)
Hope this may be helpful.
Regards,
Sharin.

Serial number field and table

Hi,
I want Serial number field and table,
Scenario like this,for returnable packging material we have assigned serial numbers,mtrl type is LEIH,so for tracking of RTP material now we are going to Develop one Report for this i need ur Help.
Logic is:1)Matrl doc at the time of Delievery.
            Qty,Posting Date,Customer,Mvt type,Serial numbers for all.
             Beacause at the time of Del we are mentioned all serial numbrs.
            2)Material Document at the time of GI.
            Same field as mentioned as above.
After that,3)System is to Calculate How many Matrl are deliever to Custmer upto current Period.Say 10.
4)Calculte How many Matrl are Recieved from the Custmer upto current period.say 5
5)Del - Issue=Total Number of Material is in Customer side.Say 5
6)According to the Serial Number wise system has to calculate in which month delieverred matrl is in still customer side.
(Ex PGI date 20.02.2007 3 qty
Serial Number    1,2,3
Issue date    20.03.2007   2 qty
Serial Number    2,3
Serial number 1 still is in Customer side.
Age is 2 month)
I am giving simple ex.
so pls any body is having this idea pls Shared with me.
Thanks
Raghu

Hi Raghu,
Check table SER01(Document Header for Serial Numbers for Delivery).
OBJK is the object table and you will have SERNR as serial number in this table.
check table EQUI
                      EQUI -SERGE
                      EQUI-GERNR.
EQUI-SERGE is Manufacturer serial number.chk if this is the one u r looking for.
MARC-SERNP.
key in plant and material in this table to fetch the Serial number profile of the material.
Check in IKPF AND ISEG Tables... ( inventory )
MSEG~EQUNR
Hope it will hep u
Regards
Hareesha

How to hide fields in Table maintenace screen

I have created a view with table maintenance generator. I would like to hide some fields. With event I am able to fill in those fields but I want to hide those from screen.

HI,
This is reff with ur below post, I have been stuck with same problem,
I got your code, how its functioning, but didn't get get where i have to write it.
plz tell me in brief.
Thanks in Advance.
Regards
Vivek
Re: How to hide fields in Table maintenace screen
Posted: Feb 6, 2009 11:42 AM   in response to: Aarti Ramdasi in response to: Aarti Ramdasi
Click to report abuse...             Click to reply to this thread      Reply
Hi,
You can hide the fields like this..
For example
select-options:
s_carrid for spfli-carrid modif id gr1,
s_connid for spfli-connid modif id gr1,
s_cityto for spfli-cityto modif id gr2.
I am going to hide last fied..To do this
at selction-screen output.
if s_carrid is initial or s_connid is initial.
loop at screen.
if screen-group1 CS 'GR2'.
screen-active = 0.
modify screen.
endif.
endloop.
endif.
whenever u click on any one of the field i.e. carrid or connid the third field will displayed.Otherwies the last field cityto is not visible initially
Regards
Kiran

Regarding LO_OBJID field of table DMS_DOC2LOIO...

Similar Messages

Maybe you are looking for