Regarding Load Failure

Hi,
Currently I am using BW3.5. I tried to load the data from R/3 to BI system. My load has been failed due to some errors. It is showing error messages like - Error 18 in the update. Can any one explain me what is the solution for this?
Thanks & Regards
Anusha

Hi .
did you check the short dump for that load in st22 .. copy that request and search for short dump for that request in R/3 and check the short dump messages..if the laod is through PSa then check the detial error message in PSA .Did you try repeating the load once .
this might have happend due to invaild characteristics ..
chekc this links
URGENT : ERROR 18 while updating the Infocube from ODS....
Error 18 in the update
Regards,
shikha

Similar Messages

Package Load Failure message in VS 2005 and Error: WIJ 20002

After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
Package Load Failure
Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
"The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
The Java version I have is 6 and I checked the Universe is not locked.
Need help to identify the cause for both errors.

Try the following as posted on another forum:
Two solutions:
1. -Go in to the Tools menu in .NET, and choose Import and Export Settings.
- From the dialogue box, choose Reset All Settings and follow the steps
2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
Regards,
Jonathan

Regarding Delta failures in bw.

Hi bw guys,
   This is vasu mailing a Question to of all my forum friends regarding delta failure.
   This is an urgent and send me the answers to me.
   when the data is coming from some tables we kept it as an Time stamp for Generic delta and it is going to ODs to ODS when the delta fails from this ods to ods what is the procedure we can do.
I am expecting the solution from you so fast.

Hi,
Till first ODS data is loaded or not, what is error it seems.
Check the selections and Initializations for second ODS.
Regards,
Venkat

Package Load Failure, no beta versions of anything

Hi,
I get a "Package Load Failure" when starting VS2008. I've tried everything I can
possibly think of, including reading about the problem in this forum, but nothing
helps. The installation has installed five different asseblies correctly (as far as
I can see) in the GAC, two for Oracle.DataAccess, and one each for the others.
To avoid problems, I made completely fresh install of Windows Vista Ultimate, then
I installed all security updates from MS, then VS 2008, then ODT 1110620. No betas
has been installed at any point.
I got one error message during install of ODT, "The request to star the service
OracleMTSRecoveryService has timed out", but I dont think that should matter for
this problem.
Are there any other things to try to get ODT to work? I would appreciate any help I can get.
The guid in the error message when staring VS 2008 is "D601BB95-E404-4A8E-9F24-5C1A462426CE".
Regards,
Carl

Hi
I run the 'gacutil /l | findstr Oracle' and that result seemed OK. I post the output here:
Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Management.Omo, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.VsDevTools, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.102.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
Policy.2.111.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=x86
Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.1.102.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.1.111.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.10.1.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.10.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
Policy.9.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
It is by the way VS 2008 (not 2005), if that makes any difference. I did not try to reregister the assemblies since they seemed OK (but my path to them are a bit different not c:\Oracle\Product, but c:\Oracle\Developer\Product because Developer is the users username (default with Oracle installer), but I did the 'devenv /setup' but that did not help.
regards
Carl

How do i fix 'error; texture load failure' problems for an online game?

i play chaoticgame.com online. it currently has no admin staff to help. the problem is that the website pages do not fully load. there is a function i can access that shows me all the errors im getting, most are- error; texture load failure and error; failed downloading....
this is a recent problem. also if i access the website via iphone using wifi from my home connection i get the same errors, so i dont know if this is a interent connection problem because ive had no other problems with websites.
i believe it has something to do with texture memory?

Hi Lorne.V.,
How exactly are you installing NI DAQmx on the target machines? Even if you include the DAQmx merge module in your build, you will still need to install DAQmx on the target machine separately.
Can you also confirm that the DAQmx.dll is installed in the same directory on both the development and deployment machines? And that you have the same version of DAQmx on both machines?
Regards,
Lindsey W. | Applications Engineer | National Instruments

Data load failure with datasource Infoset Query

Dear Experts,
I had a data load failure today,where i am getting data from the datasource which was built on Infoset Query.
we had a source system upgrade and when i checked Infoset query in the development of Source sytem im getting the below message :
"Differences in field EKES-XBLNR
Output Length in Dictionary : 035
Output Length in Infoset : 020
Message was saying Adjust the INFOSET,I dont have authorisation to create the transport in the source system.I requested the respective person to Adjust the Infoset and also to regenerate the same and move to production system.
I think this will solve my problem,Please correct me if am wrong.
Regards,
Sunil Kumar.B

Hi Suman,
i am still facing the problem even after adjusting the Infoset.The problem is we are facing the short dump with length mismatch.
when i checked the Infoset we are taking the field xblnr from table EKES and data element for teh field was XBLNR_LONG(char-35) but when i checked the datasource in RSA2 the dataelement for XBLNR was showing as BBXBL(char20).
i think this was causing the problem and i checked in SQ02 we will take the field directly from the table and how there is chance to change the dataelement.
Please help me to correct the same.
Regards,
Sunil Kumar.B

Master Data Load Failure- duplicate records

Hi Gurus,
I am a new member in SDN.
Now, work in BW 3.5 . I got a data load failure today. The error message saying that there is 5 duplicate records . The processing is in to PSA and then to infoobject. I checked the PSA and data available in PSA. How can I avoid these duplicate records.
Please help me, I want to fix this issue immediately.
regards
Milu

Hi Milu,
If it is a direct update, you willn't have any request for that.
The Data directly goes to Masterdata tables so don't have Manage Tab for that infoobject to see the request.
Where as in the case of flexible update you will have update rules from your infosource to the infoobject so you can delete the request in this case.
Check this link for flexible update of master data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/37dda990-0201-0010-198f-9fdfefc02412

BizTalk admin console error Provider load failure

Hi,
I am facing issue with BizTalk admin console, getting below error,
i thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
TITLE: BizTalk Server Administration
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
ADDITIONAL INFORMATION:
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
Provider load failure (System.Management)
after looking at event viewer i can see few more error messages,
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process id: 0x215c
Faulting application start time: 0x01d004a6e0c31506
Faulting application path: C:\windows\SysWOW64\mmc.exe
Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
Report Id: 3d994be7-709f-11e4-80ee-00505689506c
Faulting package full name:
Faulting package-relative application ID:
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
at System.Windows.Forms.Control.WndProcException(System.Exception)
at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.NativeWindow.DestroyHandle()
at System.Windows.Forms.Control.DestroyHandle()
at System.Windows.Forms.Control.Dispose(Boolean)
at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
at System.ComponentModel.Component.Dispose()
at Microsoft.ManagementConsole.FormView.InternalShutdown()
at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
at System.Delegate.DynamicInvokeImpl(System.Object[])
at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
at Microsoft.ManagementConsole.Executive.Message.Execute()
at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run()
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
does any one face similar issue if yes can you please help me to solve this?
Regards,
Amit
Regards, Amit More

here is log generated during configuration,
[2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:10:0588 Info BtsCfg] Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CWMI::Connect
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CWMI::Connect
[2014-11-24 05:16:10:0603 Info BtsCfg] Entering function: CWMI::CreateGroup
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:10:0791 Info BtsCfg] Unconfiguring feature: WMI
[2014-11-24 05:16:10:0791 Warning BtsCfg] BTS management server or DB names are not found in the registry.
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CWMI::StopHostInstance
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Entering function: CWMI::UnMapHost
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
[2014-11-24 05:16:10:0869 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:
Source of exception: System
Message: Cannot delete Performance Category because this category is not registered or is a system category.
Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
[2014-11-24 05:16:11:0166 Info BtsCfg] Stopping Tracing
[2014-11-24 05:16:11:0166 Info BtsCfg] Entering function: CWMI::DeleteServer
[2014-11-24 05:16:11:0182 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Entering function: CWMI::UnConfigureGroup
[2014-11-24 05:16:11:0197 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
[2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: no
Sub UI: yes Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: WMI Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: Engine,BTSCfg Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: RulesEngine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MOT Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: yes Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMPortal Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MsEDIAS2 Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
[2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
" Source="" HelpID="" />
Regards, Amit More

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Package Load Failure VS 2008 Architect & 11.1.0.6.20

I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect.
When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fassion." I hit "Ignore" and the installation completes.
Then when I run Visual Studio and select "Run SQL*Plus Script" I get:
Package Load Failure
Package 'Oracle Develper Tools for Visual Studio .Net' has failed to load properly...
I have uninstalled and reinstalled without the MTS Recovery Service and get the same error.
Any suggestions on getting this to work?

I started visual studio with logging turned on. Here are the results from the log file:
<entry>
<record>60</record>
<time>2008/01/18 19:14:09.974</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>61</record>
<time>2008/01/18 19:14:11.026</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>62</record>
<time>2008/01/18 19:14:11.056</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>63</record>
<time>2008/01/18 19:14:16.273</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>SetSite failed for package [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>
<entry>
<record>64</record>
<time>2008/01/18 19:14:16.313</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>End package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>

Error CDR-03111: Type Adapter load failure

Hi,
While viewing the version comparision of two version of same form getting the following error..
Message
CDR-03111: Type Adapter load failure
Cause
An error has occurred loading a type adapter class
to carry out this compare/merge operation.
Error: %0!s / %1!s
Action
Make sure that the Type Adapter classes
are available on the client machine.
I am not able to understand what action needs to be done & how.
Can any one explain it in details, so that I can able to view version comparision of two forms
Thanks,

Hi,
Infact i tried all this procedures but still my load getting failed.Replicated datasources also done source system restore.am getting the below error message.
Check Load from InfoSource
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Kindly suggest me.
Thanks

Pager from Data Load Failure

Everynight we are loading the data into BW Production system using Process Chains.
When there is data load failure, is there a way we get information on Pager for immediate action.
Suggestions are welcome.

Easiest way (at least the way I've always set it up)is if you have a text pager is have it e-mail the pager. The BASIS team will need to set up the SMTP service in ICM and a job to schedule the e-mails to be sent. You'll also need to set up the e-mail address in the user's SU01 info. There are several notes on how to set this up.
You can also set up a program that pages you but requires an exteral modem to dial up, etc. SMTP service is already there and pretty easy to integrate into your company's e-mail.
-bill
Message was edited by: Bill Smallwood

Feed loading failure

Hey folks. Is any one else getting this constant error message in Adobe Media Player?
Probably since the last update I downloaded and installed a few days ago for my Adobe CS4 Master Collection, I've been unable to view any videos on
Adobe Media Player. From the home screen, I would click on one of the Product Quick Picks in the right column, then select an item from the results area and I'd get hit with this error message "Feed loading failure." It doesn't matter what video collection I select. I can't get past this error to view a video.
I really like and need ADOBE TV and the wealth of information offered there. I hope there is a quick fix to this sudden problem.
Any ideas? Thanks,
+Ralston

I'm still getting this message no matter where I am, what network I'm on, or what video I attempt to access. Does anyone know of a fix for this message. I've asked a friend of mine at work if he get's this error and he does--the same way I do.
At home, I'm on a totally different computer attached to a totally different network and still nothing but Feed loading failure for me.
Why the error and what's the fix?
Thanks
+Ralston

BW statistitics cube load failure

Hi All,
I am facing load failure when loading data in BW Statistics cube.( 0BWTC_C04).The error message was Information was stored in the source system. Its the delta update from BW source system.
The IP hanged very long time but the load has successful after repeating the step.
Please suggest me to avoid this failure.

Hi vijayakumar sbramani,
As this seems to be your first question posted on SCN forums, just wanted to let you know that it would be good to choose the correct forum from the list and then post your question...only then can you expect to get proper solutions to your issue.
For now I am moving this thread into the BI forums.

How to u2026u2026 Load CO- PA after load failure

Hi Experts,
How to u2026u2026 Load CO- PA after load failure

Hi
Follow the following steps to load the CO-PA data into BW after load failure/zero records.
1)     Log on to R/3 System and note down the time stamp for the last successful delta from the Table TKEBWLG. Alternatively the same information can be viewed using the Transaction KEB2
2)     Log on to BW System and delete the failed request from the data targets.
3)     Delete the old Initialization for the data source.
4)     Initialize delta with no data transfer selection.
5)     After successful initialization, log on to R/3 System and go to transaction KEB5.
6)     Enter the CO-PA data source and check the option u201CFrom date and timeu201D as shown above. Enter the date and time
Click Execute.
7)     Log on to KEB2 and confirm the time stamp entered above.
8)     Start Delta from BW and load the data.

Regarding Load Failure

Similar Messages

Maybe you are looking for