Regarding logical system assigining to transport request

hi, all,
how to assign the transport request for logical system.,....because i transported the interfaces to quality system..please guided me in this

Hello Sai
I am not sure about the meaning of your question.
You do no assign any logical system to a transport request but you must define the target system (see Properties of request). Calling the search help for this field you see that the target systems are coming from the active transport configuration (STMS).
Perhaps your question is about how to set the client in which the request is imported. Regarding workbench request containing client-independent objects it does not matter whether you import into client '000' or your productive client.
For customizing requests containing client-dependent objects you set the client when executing the import (either in STMS or via command line when calling the tp command directly).
Regards
Uwe

Similar Messages

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

Clarification Regarding Logical System Names

HI all,
I read the blogs regarding Logical System Name, even I am having the some problems in my system.
For PI system client is 100.
R/3 System Client is 100 is created.
IN PI when I checked the sale->basic setting-> LOgical Settings-> Assign Logical Systems
I found there is only one client 100, and it is having the same logical system name as 'PICLNT100'.
In SLD one Business System is created for Client 100 and having the Logical System Name is 'PICLNT100'.
When I checking in the R/3 system that logical system Name ('PICLNT100') is not there and for r/3 client 100 having the different logical system name.
IN ID when I found the Goto ID->File Buinsess system and Menu ->Services->Adapter Specific Identifiers->Logical Ssytem,
It is different from the SLD logical System Name.
How Can I know in PI, that Logical System is belongs to r/3 or PI client 100,
when I running the sceanrio it is giving error as ATTRIBUTE_INV_SND_SERV while doing the file to Idoc scenario.
How I have to maintain the logical system names in this case?
please help me in this.
Regards,
Sree

hi.
each r3 system has his own SLN (PI,BI,ECC,etc). this name identify each R3 sytem.
http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
IN ID when I found the Goto ID->File Buinsess system and Menu ->Services->Adapter Specific Identifiers->Logical Ssytem,
to export data of your R3 system to SLD, just do it from TCODE RZ70 in your r3 system, not PI.
once you configure it all data from r3 system is exported to SLD.
if the SLN does not match in Adapter Specific Identifiers->Logical Ssytem, edit the Bussines System (press in the little pencil) go to Adapter Specific Identifiers->Logical Ssytem and prees in the little hand icon. in the SLN in not refresh, go to menu enviroment--> CLEAR SLD DELTA CACHE. and repeat the steps before.
each time you send data to an R3 system and the sender system is a legacy. in your receiver communication channel>header mapping>sender system--> select the PI Bussines system and try again.
hope its helps
Rodrigo
PD: rewards points if useful

No system in the system landscape exports transport requests

Hi gurus,
We are trying to implement the Change Request Management scenario in
Solution Manager 4.0 SP12 in a POC.
The TMS are created with Solution Manager as Controller and with the settings are correct.
We have created a Maintenance Project with the following landscape :
system1 - Client 100 as Development System - Type of Rol "Source System"
system2 - Client 200 as Quality System - Type of Rol "Target System"
system2 - Client 100 as Production System - Type of Rol "Production System"
In the Change Request tab, when we check "Activate Change Request Management" checkbox, the following error is shown:
"System system2-100 is to be changed in a Solution Manager project, but no
system in the system landscape exports transport requests which are
imported into this system."
What is happening? Any idea??
Thanks

The reason may be, that your "POC" is not valid due to the fact, that you use "clients" and not "systems" to transport
What you can try to verify that is - take out the QA client/system out of the transport route and try then to activate just with DEV --> PRD.
We wanted to setup something similar in the past and TMS failed to get configured properly - due to exact that reason.
Markus

Regarding Logical systems

Hi all,
when i was trying to create new logical systems in trnsaction code BD54. It is said that you are not authorization to create logical systems. To get authorize what should i required?
venkat

Hi Venkatravi,
You can Create Your Own Logical System when you have an Access from the Basis People in our Company, They have to give You the Access.
<REMOVED BY MODERATOR>
Naresh.
Edited by: Alvaro Tejada Galindo on Apr 25, 2008 1:31 PM

Regarding logical system function module....

hi all,
i migrated one interface program from 4.7 to ecc...both are seperate servers.....its working fine in 4.7 system...when it came to ECC.there s no errors...but in testing they found tat some system id is missing like tat...in RFC they called one FM OWN_LOGICAL_SYSTEM_GET........please guided me in this....

Ok sai. This interface is working in 4.7 why because it has the logical system name has been created and assigned to the client there. So, what you will do is take the logical system name given in 4.7. You can do that by going in to SALE tcode...under Basic Settings>Logical Systems>Assign Logical Systems
Here select the client name, and click on the button next to "change/display", that is the Details button. Here you can see the logical system name. Note that.
Now, in ECC 6.0, go into SALE tcode and then follow the same path...But instead of assign logical systems,select define logical systems. Now, click on New Entries button and then give the name you have in 4.7 and then give the same name in 6.0...and give a description. Save it..
Come Back,, now click on assign logical systems and then move into change mode....then select the client u logged in with and then click on details tab and here change the logical system name. Give the logical system name you just defined. Save it...and come out.
Now, try executing the Interface you migrated. And revert back with the error if there is any.
Vishwa.

Regarding logical system

Hi can any body help me how to assign logical system to business system in SAP XI.please send me screen shots if anybody have it.

Hi,
Refer the below step by step help:
http://help.sap.com/saphelp_nw70/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/frameset.htm
Also check the below link for screen shot:
SLD preparation very good:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
Working with System Landscape Directory (SLD) :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak:
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
XI Software Logistics 1: SLD Preparation:
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Thnx
Chirag

Regarding User-Exit/Badi and transport Request

Hi All,
Some one asked me one question that when we are putting some code in one exit then transport requests are created or not.What is the case when we are putting some code in a method to implement a BADI.Is transport request is generated ?
I have told that in both cases the transport requests are generated.Am I wrong?
Can any one please explain.
Thanks in advance and waiting for your reply.
Raj

You are right, provided that you assign those objects to transportable Dev. class/Package.
Rgrds,
Hadiman

Including logical path into my transport request!!

hi i have defined a logical filepath for my report from where it will read the files ....
can i include this file path in to my TR...which i have created using transaction FILE if so how should i include..
thanks.

HI..
When you log into the FILE transaction it says cross client table.. So that means it is a customising change..
You need to create a customising request and include the change in that request. this is to move it from one system to another.
that is dev to quality for eg.
but to get it in all clients in dev you dont have to do anyting. since it is cross client you will get it by creating in one client itself.
regards
ansari

Transport Request for logical database

Hi ,
Could you please advice how to create Transport Request when we made the changes to logical database ( added new filed to the logical database)
I have added payment term field to the logical database DDF, but Transport Request was not created for this change.
Please advise, we need to move this changes to other servers from development.
Thanks,
KSR

How did you change the standard LDB ?
Create a new reuqest in se09 and add this.
R3TR LDBA DDF

No Transport request in Virtual system

Hi,
I have setup the STMS , where we do not have production server hence i have used virtual system.
All Transport request moved from Dev to Quality which appears fine the queue of QAS Server, but not appearing in Production Server which is virtaul.
kindly advise.
Thanks you
irfan.

Hi,,
We do not have any QA Approval procedure, but all requests are assigned to one project.
Seconldy i went into the Tcode SE01 entered the released transport number but i could not see any such logs which says waiting for QA approval.
all it says is this..
Log Overview for DEVK900421
       DEVK900421              MM-Release Strategy
         DEV        System DEV
                    Checks at Operating System Level         14.09.2010 02:14:24    (0) Successfully Completed
                    Pre-Export Methods                       14.09.2010 02:14:27    (0) Successfully Completed
                    Export                                   14.09.2010 02:14:33    (0) Successfully Completed
             Import steps not specific to transport request
         QAS        Quality Server
                    Selection for Import                     14.09.2010 02:14:33    (0) Successfully Completed
                    -> Continue: Other Transport Ggroup      14.09.2010 14:53:51    (0) Successfully Completed
             Import steps not specific to transport request

Unable to Create Transport request in more then one DEV client (in ChaRM)

Hi,
We are having 2 Landscapes,
DV1 (100) --> QA1(100) --> PR1(100)
DV1 (200)--> QA1(200) --> PR1(100)
Both these landscapes are added in the ChaRM Project landscape. When we have created a correction and created a Workbench request, we were getting the option to choose the DEV system and we chose DV1(200). When we tried to create a TR for Customizing in DV1(100) it did not provide the pop up for DEV systems and directly created the customizing request also in DV1(200). We were unable to even create the TR in DV1 (100) - using the task 'Create Transport request' in the Task plan for the corretcion (It gave an Error that the DV1(200) is the Development system for this change).
is this the standard behaviour? can't we have TRs from different client/ development systems under the same correction?
Please clarify?
Regards,
Kathir

Hi
As i said earlier you will get option to choose system for creating Transport Request only in case of normal corr
but in case of urg corr
you need to give ibase for production of the cocerned landscape
e.g if u have ecc and bi and want to create transport in ecc then giv ibase for prd of ecc only
because you will not get pop up in urg corr
Hop doubt clarified
Regards
prakhar
Edited by: Prakhar Saxena on May 12, 2010 6:17 AM

Releasing transport request taking long time

Hi All,
I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
In SM50, i didn't find any processes running.
Can anyone tell me the solution.
Thanks & Regards
Uday

Hi Uday,
>> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
>> In SM50, i didn't find any processes running.
It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
Best regards,
Orkun Gedik

How to create Transport request in R/3(ECC6)

Hi all,
Can somebody tell me how to create the transport request in ECC6.0
Regards
Kiran Kumar

Kiran,
From RSA5 --> Choose datasource and select "Activate Datasource" --> system prompts for transport request. Do not save as local object. assign package and assign to transport request.
From RSA6 --> Select datasouce --> choose transport(truck icon) --> follow same as above
From LBWE --> if you do any changes or customization system prompt for transport request.
Hope it Helps
Srini

Error in Transport Request PRD to Test application

Dear all,
We are in process of doing reverse transport from PRD to TEST system. i have opened the PRD system and collected the objects in TR and once again done the transport of copies in PRD system
after transport of copies, i tried to import the TR in TEST transport queue. once i tried to import the same i got the below error.
Please advise what needs to be done. Any help would be appreciable.
Transport control program tp ended with error code 0247
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER PBWK900028 TBW pf=/usr/sap/trans/bin/T
Return code: 0247
Error text: addtobuffer has problems with data- and/or cofile
Request: PBWK900028
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
regards,
mohankumar.G

Hi,
when creating Transport Requests in the Production system the requests are created as local requests that can't be transported between systems, and when the Transport Request is released the Data and Cofiles are not created.
You need to change the client settings with Tx SCC4 to allow the creation of Transport Requests.
You need to create a Temporary Transport Layer and Temporary Transport Route from Production to Test System. When you create the Transport Request make sure the transport request is using this newly created transport layer and has a target system.(Package also) when you release this request, the data and cofiles will be created. The transport request should also appear in the import queue of the Test system.
Satish.K

Regarding logical system assigining to transport request

Similar Messages

Maybe you are looking for