Regarding lsmw file port creation

Hi Experts,
By using lsmw (bapi technic),while executing ,
the step of start idoc generation its showing that 'no partner exists with the name type'.and how to create lsmw file port.
Please resolve this issue ASAP.
Regards,
Reddy.

Hi venugopal ketu ,
please go thru the below useful links....
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://www.****************/Tutorials/LSMW/LSMWMainPage.htm
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://www.****************/Tutorials/LSMW/LSMWMainPage.htm
All the very best....
Regards,
Sreenivasa sarma K.
Edited by: sharmashree kashi on Mar 28, 2008 5:04 PM

Similar Messages

LSMW: File port creation

Hi all!
I am trying to create LSMW. Now i have assigned BAPI object. It is asking me to maintain IDOC parameters. In which one is File port.
If i click on Maintain. Then it takes me to other screen.
May i know how to create file port.
Thanks in advance,

Hi,
You can create the file port using WE21, for more details refer,
Lsmw
LSMW
Regards,
Hema.
Reward points if it is useful.

Cannot find the maps stored in import manager during port creation

Hi All,
I am unable to find any maps that i saved in import manager during port creation ,the maps are not showing in dropdown list during port creation in console.Do i need to store the maps that i have in import manager in specific place under mdm server,so that i can see them during port creation.
All i need to do is assign my import map during inbound port creation,but i cannot find any maps in console.
Could I know whether i am storing my maps some where other than default location.
Thanks
Aravind

Hi Aravind,
First of all check the remote system assigned to ur Port. After that go to import manager. When u logon to the import manager, u get a window "Connect to source". Mention the same remote system over there.Select the file type.Browse the file and map the fields,values,field matching and save the map. then unload the repo and assign the map to the port.
Second way is, u create the port first and give any particular remote system to it. Put the file (u want to use for mapping) in the ready folder of that port and in connect to source window select the type as port, remote system(ame as used port port) and port.then map and save. unload the repo and assign the map to port. Ready folder will be in ur server at location: C drive or D drive->SAP MDM 5.5 ->server->distributions->repo name->inbound->port code->ready. For this option, Ur port type should be manual. After assigning the map u can change it to automatic or keep it manual as per ur requirement.
Hope this solves ur problem.
Regards,
Dheeraj.
Edited by: Dheeraj Kumar on May 6, 2008 9:16 AM

Automatically process IDoc to XML File port

Hi everybody,
I want to send two different IDocs via "XML File" port using change pointers and the distribution modell (one SAP standard, one custom).
I maintained the distribution model and created outbound parameters in partner profile (WE20). Both are set to "Transfer IDoc Immed.".
1.
Now I change some master data and the change pointers are created. I run RBDMIDOC for both message types and both IDocs are created. But unfortunately they stuck at staus "30 - Idoc ready for dispatch" (yellow). I need to run RSEOUT00 to create the XML files.
Is it possible to avoid a job that runs this report? I want the IDocs to be processed automatically right after creation.
The really strange thing about this is, that it used to work for the standard IDoc (BOMMAT). But I might have changed some settings to get my custom IDoc work too and now both stuck at status 30?! This is what bothers me most...
2.
When the XML files are created (at the moment after running RSEOUT00) the status in WE05 is "03 - Data passed to port OK" (yellow).
Why is this light still yellow? Everything is fine, the file was created, it should be green. Is there anything I can do?
Thanks and best regards,
Oliver

Hi,
thanks for your suggestions.
Unfortunately this did not solve my problems.
1)
OUTMOD for both messages was 2 (which should be ok). Changing it to 1 did not have any affect.
At least BOMMAT works again (both with OUTMOD 1 and 2). But my custom IDoc still does not get processed automatically.
2)
Running report RBDMOIND did not change the status of my IDocs. Please keep in mind that it is no tRFC port, but XML File port.
Best regards,
Oliver

RFCExec and File port

Hi
I created file port that write idoc to some network location. Than i want to run program that will process this new file. i regestered program using rfcexec on my computer. i checked in smgw that conection is active. I also created connection type T with registerd program in sm59.
Next step was to write some bat file on my computer to proces idoc. on outbound triger tab i checked automatic start possible, and path to this file on my computer. ALso in we20 partner profile i checked startsubsystem.
What is wrong ?? is it because my script is bat file ??
Regards
Maciej

hi
Port is the Logical representation of communication.
There are 4 types of ports
1)TRFC
2)File
3)R/2 (ABAP/4)
4)Internet
In ALE we transfer/exchange the data (SAP Data) b/w 2 systems ie only through RFC (Transaction RFC) we communicate with the other system.we use File Port to transfer Non Sap data b/w systems.
Tcodes :
Port Creation : WE21
RFC Destination : SM59
Regards

Dynamic read of file for File Port

As per our project requirement have to use File Port to pick a set of IDOC Flat files from a given directory. The File Port only allows us to pick a file with a specific given name and does not allow us to pull file with a pattern for .eg. We can pull a file abcd.txt but cannot pull something like abc.txt. Our requirement is to pull abc.txt using the File Port.
If anyone has any idea about this, or any past experience with File Port in this regard, then please respond at the earliest.
We have created the file port with follwoing parameters:
Unchecked the Unicode Format System Setting
For the Inbound File:
Function Module: EDI_PATH_CREATE_CLIENT_DOCNUM
Directory is: A valid directory path
File Name: abcd.txt

Hi,
According to me, while using the automatic syndication through ports, it is not possible to change the filename that IDOC flat file generates.
FTPS != Secure FTP (990)
FTPS should have SSH Port 22.
u can check on this:
Basic FTP Setup Instructions
refer this thread also
FTPS
Thanks & Regards!!!
Saurabh Goel

How To create a File Port in ALE Settings

Hi All,
I want to create a File port, but can anybody help me what are the details have to be updated while creating the Port in WE21.
Is it i need to mention RFC Destiantion while creating a File port.
IF not let me know how to configure the logical systems with out giving the RFC destiantion.
Regards,
Madhavi

Hi alexander,
But for function module MAster_idoc_distribute.
What are the parameters i need to pass for Logical systems and what i have to give in the Model distribute .
Can you explain me detail.How the sys knows have to maintain for sender and recevier sys.
As File port new to me.
Regards,
Madhavi.

How to copy/send text file from FTPS to SAP ECC File Port

Hi Frdns,
I am working on one design, actually my requirement as follows
I am receiving financial information document from Banks, which is in the form of BIA2 message format, it looks like text file. This information needs to be sending to SAP ECC system.
I identified some approaches to full fill the requirement
1)Using Conversion agent/or third party tools to convert BIA2 message in to XML, then using PI I will pick up the XML message, convert it in to IDoc.
2)Without any conversion I will copy the same file (original BIA2 message) in to SAP ECC file port, in this case no conversion required, calling some program I will schedule it.
I am looking forward t implement the second approach because it saves lot of money to my client.
Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
What is the best approach to copy the BIA message text file from FTPS to SAP ECC File Port.??
Regards,
Raj

Hi Raja,
>>Now I am wondering using File adapter can i copy to SAP ECC File Port or I required ABAP proxy?
Yes you can do this copy, the only restriction that can happen is the file size.. If you are sure that the fiel will be of few MB at the max then you can use the Configuration part alone and copy it to ECC folder. For doing this you need the following:
1. Sender agreement (mention the sender interface as anything XYZ)
2. Sender communication channel. Pick the file in binary mode
3. Receiver determination (keep both the sender and receiver service as same)
4. Interface Detemiantion (dont specify any mapping and keep the receiver interface name as XYZ)
5. Create receiver agreement (with same service and interface)
6. Use file adapter here
Regards
Suraj

Reading Dynamic Files using File port

Hello All,
We have a requirement in our project where we have to use File Port to pick a set of IDOC Flat files from a given directory. The File Port only allows us to pick a file with a specific given name and does not allow us to pull file with a pattern for .eg. We can pull a file abcd.txt but cannot pull something like abc.txt. Our requirement is to pull abc.txt using the File Port.
If anyone has any idea about this, or any past experience with File Port in this regard, then please respond at the earliest.
We have created the file port with follwoing parameters:
Unchecked the Unicode Format System Setting
For the Inbound File:
Function Module: EDI_PATH_CREATE_CLIENT_DOCNUM
Directory is: A valid directory path
File Name: abcd.txt
Thanks in advance.
Abinash

If the xml files are all in the same directory (not in any directory structure relative to the parent directory), you can do something like this.
- create a bpel process to read the zip files as it comes into the directory]
- Have a file adapter inbound for the receive
- Call windows .bat command within the bpel process to run an unzip command on that directory
- Have another bpel process that reads *.xml files and this will get kicked off.
There are so many ways of solving this: like having a cron job to unzip the files coming in etc. But, if you have a directory structure for these XML files and if the structure is dynamic, it is difficult to configure the file adapter for that.

Need Information for transporting a file as IDOC through File Port!!!

Hi,
All configurations are present in the system to transfer a file as IDOC using File Port.
Now we are creating a custom program to transfer the same. Now i have all the data in an internal table which has to be send to Non SAP system. So can i know the process how to send the same.
I have a SAP Directory where i need to place the system. I also have all ports required.
So please let me know how to code the same ASAP.
Thanks and Regards,
sagar..

You may want to try using the IDOC Test tool WE19 in order to test out your ports and partner profiles.
Also sending from SAP to XI / PI you might be better configuring RFC Destination / SM59.
See this Wiki for more info...
http://wiki.sdn.sap.com/wiki/display/XI/ALE+Configuration

Selection of TCP/IP Or FILE Port

Hi Experts,
I have one Doubt While We are doinng IDOC To File Scenario.
We have to Create Port In WE21 of Type TCP /IP.
If We Select the Type As FILE Means What wil Happend.
Please Explain me little bit on this.
Regards
Sesh

Hi
The Port can be a File Port (IDocs will be saved in this folder)
REFER THIS THREAD
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/6b7fa443d711d1893e0000e8323c4f/frameset.htm
Ports are use to define the way data is send (or received) from another partner (e.g. other system).
- Port type Transactional RFC defines an RFC Destination.
- Port type File defines a file and directory (and a function module that does the record handling for your output file)
- Port type CPI-C defines an SAP R/2 system and transmission parameters.
- Port type Internet, allthough in the system is no longer supported (See SAP note 315083).
- Port type ABAP-PI defines a function module that will do the transmission. This is often used if you want total control over the sending (or receiving) process.
- XML defines a file and directory (and a function module) specific to XML formatted files. The XML-HTTP leaves out the file and can transmit directly to a website location

File port

Hi
I want to generate a txt file from a IDoc on the app server...i have used a file port and provided a physical path there which is also available in AL11
when i trigger the idoc it is giving status 03 however the file is not getting generated in the folder ...what may be the reason

HI Hema,
I think may be some steps missed.Please go through this wiki from Pavan.
[Idoc into Text|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80b8db75-e481-2d10-7e94-81e1e29594e9?QuickLink=index&overridelayout=true]
Regards,
Madhu.

Could not open Transport File for creation

I Changed the path and copied the repository from old path to new path. While executing se38 à RSCMST TCode, we get the errors in RED(HTTP interface using fuction group).
1.The error log check_subrc: subrc     1 instead          0
check_subrc: Component : data error text : No such file or directory
docGet: DOC_0                                    error
docGet: DOC_S
check_subrc: subrc     1 instead          0
check_subrc: Component : sdata1.txt error text : No such file or directory
docGet: DOC_S                                    error
docGet: DOC_M
check_subrc: subrc     1 instead          0
check_subrc: Component : mabc error text : No such file or directory
docGet: DOC_M                                    error
docGet: DOC_L
check_subrc: subrc     1 instead          0
check_subrc: Component : ldata error text : No such file or directory
docGet: DOC_L                                    error
docGet: DOC_N
check_subrc: subrc     1 instead          0
check_subrc: Component : Data6 error text : No such file or directory
docGet: DOC_N                                    error
HTTP error: 404 (Not Found) "G:CS_REPZHR_MASTEK046cDF6258C5DF68EAF183C4001F295A507C directory not found"
info: mCreate DOC_0                              error
2.Message 704: (SAPKPROTP Error: Could not open Transport File for creation.
Thanks & Regards
Jituda

Hi,
Could you plz let me know how did you fix this issue?
BR,
Shyam

WSDL version used for port creation in SOAMANAGER for Netweaver 7.01 SP-5.

Hi,
Does SOAMANAGER refer to a particular version of WSDL while creating the logical ports for consumer proxies. I'm asking this because after one of the upgrades in our ECC system we find that the authentication configurations of the port are automatically done based on the WSDL now, however this was not the case earlier.
Also logical ports created manually are giving runtime exception (Soap FAult Code : 1). Does logical ports creation necessarily have to be done from WSDL.
Please throw some light on the above, if any of you have faced this issue already.
Regards,
Avishek.

We got a reply from SAP that from NetWeaver 7.0 SP3, logical ports will be created based on Security policy mentioned in WSDL. We can however override this by creating the port manually and the SOAP fault code error can be resolved by manually entering the SOAP Action for each method of the Service in the 'Operation Specific' tab of the Logical Port details.

File Port with Outbound Trigger

I am exporting idoc through a file port in we21. I have the outbound trigger set up as follows.
I have Autom. start possible selected
RFC destination SERVER_EXEC -> which points to /sapmnt/DEV/exe/rfcexec to execute a local UNIX script.
I am using a phyical directory of /tmp
and a script of zip_file.
When I execute RSEOUT00 i see the idoc file being create on the filesystem, but the UNIX script is not getting executed.
Does anyone of any ideas on why my trigger is not working?
Thanks
Skip Ford

Hi,
I don't think IDoc port can be used to trigger UNIX script other than to tell the system where to output the data.
Why don't you schedule a job with two steps (execute RSEOUT00 and trigger UNIX script) and run periodically?
Regards,
Ferry Lianto

Regarding lsmw file port creation

Similar Messages

Maybe you are looking for