Regarding mail sending while saving VA02

Dear Experts,
I have requirement  mail to be sent while saving VA02 .
Mail ids are maintained plant wise in custom table.I have to send the mail to the mail id maintained in custom table while saving the VA02.
Here in VA02 we have added output type which is related to mail which triggers the program RSNASTS0.
But while saving this program is not getting triggered.But mail is coming to the SAP INBOX.
Why this program is not triggered and how can i do the abouve requirement.
Regards
Ramakrishna L

Hi Rama,
First of all, could you please tell me whether the NAST program that you wrote is sending the mail to SAP Inbox. If that program is sending the mail to SAP indox, then to send the mail outside SAP, like the users official mail id, you need to activate auto forwarding feature. This can be done using Tcode "SO36". You can activate this feature and try to test it out.
Please let me know if this will server your purpose.
Regards
Maneesh Chandran
Edited by: Maneesh Chandran on Aug 9, 2010 8:35 PM

Similar Messages

  • HOW TO Send mail while saving VA02

    How can i send mail while saving VA02.
    The mail address i have to pick from custom table based on plant.
    Just for the trial we used : output type :KRML
    Application : V1
    Transaction medium :7.
    and the program RSNASTSO routine SAPOFFICE_AUFRUF_VX is attached in the nace.
    The same output type is attached in va02.If we use this output type with this medium , it is asking us mail partner
    address also in the VA02.
    but we have to get the mail partner from custom table.
    And with this output type , the program attched in the NACE (RSNASTSO) IS NOT GETTING triggered.
    But the mail is being sent to the mail partner which i mentioned in the VA02 Communication method.
    How can i solve this.
    Finally my requirement is i have to send a mail to exter id which is maintained in the custom table while saving VA02.
    Regards
    Ramakrishna L

    Hi,
    We had set a output type in NACE. and that output type we have in the VA02 transaction also.
    But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
    But mail is sent to the SAP Inbox or official id .
    how that mail is gone i am not understanding.
    How can we do to go through the program mentioned in NACE while saving the VA02.
    The mail body coming with text " sales order is blocked" sopme thing like this.
    This same mail i have to sent to the mail id maintained in Custom table plant wise.
    Regards
    Ramakrishna L

  • How to send a mail while saving va02

    Hi experts,
    i have to send a mail while saving the VA02.
    The mail id s are maintained in Custom table based on the plant.
    Regards
    Ramakrishna L

    Hi,
    We had set a output type in NACE. and that output type we have in the VA02 transaction also.
    But While saving the transaction it is not going through the program mentioned in the NACE for that output type.
    But mail is sent to the SAP Inbox or official id .
    how that mail is gone i am not understanding.
    How can we do to go through the program mentioned in NACE while saving the VA02.
    The mail body coming with text " sales order is blocked" sopme thing like this.
    This same mail i have to sent to the mail id maintained in Custom table plant wise.
    Regards
    Ramakrishna L

  • Screen Error while saving VA02 Transaction

    Dear All,
    Yesterday there was a sudden power failure in my company. Even UPS also got fail. Due to which some errors are coming in Production Server.
    The error is coming in VA02 transaction while saving the transaction. The error is: "SAP SYSTEM MESSAGE - ERROr IN LOADING SCREEN: NO END LABEL".
    Here is the below log from SM21 transaction.
    Date : 31.10.2009
    Time -Type-Nr-Clt-User-TCode-Priority-Grp-N-Text
    18:54:00-DIA-000-554-ITDEPT--VA02-D0-1-ransaction Canceled 00 029 ( SAPLSPO2 0301 )
    18:54:01-DIA-000-554-ITDEPT----
    R4-7-Delete session 001 after error 024
    So can you please explain, what I need to do to resolve the error. Although I have already activated the program SAPMV45A.
    Regards,
    Vishal

    This link describes similar circumstances.
    Error Loading Screens - No End Label
    No solution was found and OSS logging was suggested.

  • Regarding mail sending in ALV

    Hi All,
    I got a requirement to develop a report,
    when executed, will execute and send a mail automatically of output,  to a particular user.
    Please tel me where to put the logic.
    Thank You,
    Rohith.

    Hi Rohit,
    Check the below link:
    Mailing ALV report OUTPUT
    Regards,
    Saba

  • Regarding Mail sending

    Hi,
    Iam using the function module SO_NEW_DOCUMENT_SEND_API1 to send the mails. I want to hard code the sender on the email to Mailbox?
    --Naveen Inuganti

    Hi,
    Sending mail can be done using some other function modules that are sepcific to send mails
    Go to se37 search for mail F4 u shall get a list of function modules to send mail.
    CRM_EMAIL_SEND_EMAIL etc.
    Hope this solves your issue...
    Thanks
    Ravi Aswani

  • Error while saving Views in Portal - Technical name not valid.

    Hi,
    When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
    Thanks & Regards,
    Hari

    Dear Harikrishna,
    while saving iviews in portal..
    it will prompt for some mandetory columns is it.. one is for description..
    and the iview name like iv<name of the template>.. this should be without space..
    and in the next page u should give technical name of the template as 'template=<name of the template'
    in this you should not give any space..finish and save the ivew..
    hope this would help you.

  • Need userexit while saving the material in MM02

    Hi folks,
    Need a userexit while saving the material in MM02 transaction.Kindly help me out.
    Regards,
    Raj.

    FM while saving the MM02 is 'MAFI_POPUP_TO_CONFIRM_SAVE'.
    Regards,
    Rajasekhar.

  • While saving the sales order through Va01 and Va02 and email has to send

    Hi Experts,
    My requirement is to send an email with PDF formatted display of the Sales order to the sold to party's email id while saving the Salesorder through Va01 and Va02.
    I need the following .
    How to send an email with PDF formatted attachment of Salesorder display ? (we have done the formatting of display through SMARTFORMS )
    I think we can do it by userexits program name is MV45AFZZ while saving the document.
    Please suggest me the best possible way.
    Thanks ,
    Saritha

    Hi, there is no need for a customer devlopment on this. A standard smartform output will do with output medium '5' (external send). Then the smartform output will be send as PDF to the e-mail address in the output partner. Have a look at transaction NACE.
    Regards Jack

  • Re: Is it possible to send a delivery order while saving by E-mail OR SMS.

    Hi All,
    I have a requirment where my client requires that while saving the delivery order it should go as an E-Mail or SMS to to concerned people.
    Please Advice.
    Regards,
    Vivek

    Hi Vivek
    For Emailing
    You may check at Output Control> O/P determionation > O/P determionation with cond tech > Maintain O/p for sale Activity > Detrmn Procedure> Procedure CAS006.
    For SMS
    You may use same along with essential CRM componets
    Hope it helps
    Regards
    Saurabh

  • Send e-mail  Billing document as PDF Attachment while saving from VF01/02

    Hi all,
    I have written the code for sending email with PDF attachment. Presently this code is included in the Print program for the smartform and an email is sent when an output is issued manually from VF02/03 where as the requirement is to send email whenever the document is saved.
    We need to trigger this while saving the Output type say, <b>VF01</b> GOTO -> HEADER -> OUTPUT (select the output type) -> SAVE - should send an email with PDF attachment.
    need ur help on this.
    thanks,
    Subba.

    Hello,
    Just like you have defined an ouput type for smartforms ,you can define new output type with external email option as medium which will first generate a PDF from invoice data & then send it as email .
    I am not sure but you can also try this ::::::
         If you have custom-developed smartforms program,then you can add email code at the end of smartform execution by generating PDF, in the same output type instead of  creating new.
    Thanks.

  • COA to be send to customer while saving delivery.

    Dear Friends,
    I have a requirement of sending the certificate of analysis (finished product)  to customer while saving delivery document.
    COA is the developed form (Z development) designed and that output we need to send to customer through email as soon as the sales delivery document is saved.
    To sum up my requirement :
    I need to  send COA through email as soon as delivery is saved. 
    Please provide your expert comments.
    Best Regards,
    Shekhar

    Dear,
    You want to send a quality certificate for the delivery to the Sold-to party.
    Define the settings for the output types for certificates (LQCA and LQCB in the standard system):
    Quality Management -> Quality Certificates -> Output Determination -> Define Condition Types for Output Determination
    Enter the required communication strategy in the "Default value" tab page. Assign output determination procedure to delivery item category".
    Define the assignments of the output types for certificates for the print program and transmission medium:
    Quality Management -> Quality Certificates -> Process Output -> Assign Print Program to Output Type/Medium
    Program RQCAAP00, FORM routine ENTRY, do not specify a form.
    The standard system provides the universally applicable QM_QCERT_01 form.
    The forms must be compatible with the output program. In the standard system the following output programs are available:
    RQCAAP00 for certificates for a delivery item
    You can access this program in Customizing for message dispatch and the program can be exchanged.
    RQCAAP01 for certificates for an inspection lot
    RQCAAP02 for certificates for a batch also you can use the FM 'QC02_BATCH_CHAR_SPECS'
    SAPLQC07 for certificates for a batch on the Internet
    For more details refer the OSS note 39418.
    Regards,
    R.Brahmankar

  • Error while saving the documents in Transactions MIRO,VA02, VA01, ects

    Hi SAP Gurus,
    i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
    The error is  * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
    can u please help me out.
    Regards
    Kumar m

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • While saving the delivery no in VA02 dump error showing (Arithmatic overflo

    Hi,
    while saving the delivery no in VA02, one dump error getting displayed.
    Arithmatic over flow occurs.
    Can any one can say how to rectify the program to avoid dump error
    The below lines are showing in dump.
    Waiting for quick response.
    Error analysis                                                                 
                   An exception occurred that is explained in detail below.                                                       
                   The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not                                                       
                    caught in                                                       
                   procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", nor was it propagated by a                                                       
                    RAISING clause.                                                       
                   Since the caller of the procedure could not have anticipated that the                                                       
                   exception would occur, the current program is terminated.                                                       
                   The reason for the exception is:                                                       
                   An overflow was discovered in an ongoing arithmetical operation with                                                       
                   operands of type P. Possible causes are:                                                       
                   1. The result field of type P is too small for the result.                                                       
                   2. The result or a intermediate result has more than 31 decimal places.                                                       
         How to correct the error                                                                 
                   The result field must be enlarged, if this is still possible. It may                                                       
                   also be possible to break up the current process into subprocesses so                                                       
                   that only smaller values occur.                                                       
                   There may already be a solution to the error in the SAP notes system.                                                       
                   If you have access to the SAP notes system first try searching with the                                                       
                   following keywords:                                                       
                    "COMPUTE_BCD_OVERFLOW"                                                       
                    "BCD_FIELD_OVERFLOW" (Until release 4.0a, this runtime error occurred at this                                                       
                    position)                                                       
                    "SAPMV50A" or "ZSDI_MV50AFZ1_CRPC_CALC_4QA"                                                       
                    "USEREXIT_SAVE_DOCUMENT_PREPARE"               ***----
         Information on where terminated                                                                 
                   Termination occurred in the ABAP program "SAPMV50A" - in                                                       
                    "USEREXIT_SAVE_DOCUMENT_PREPARE".                                                       
                   The main program was "SAPMV50A ".                                                       
                   In the source code you have the termination point in line 666                                                       
                   of the (Include) program "ZSDI_MV50AFZ1_CRPC_CALC_4QA".                                                       
                   The termination is caused because exception "CX_SY_ARITHMETIC_OVERFLOW"                                                       
                    occurred in                                                       
                   procedure "USEREXIT_SAVE_DOCUMENT_PREPARE" "(FORM)", but it was neither handled                                                       
                    locally nor declared                                                       
                   in the RAISING clause of its signature.                                                       
                   The procedure is in program "SAPMV50A "; its source code begins in line                                                       
                   208 of the (Include program "MV50AFZ1 ".
    657                           ADD: xvbap-brgew TO l_w_tot_list_vals-brgew,                                                  
         658                                xvbap-zzlogpoint TO l_w_tot_list_vals-zlogpoint,                                                  
         659                               xvbap-zztotgrossvalue TO                                                  
         660                               l_w_tot_list_vals-totgrossvalue.                                                  
         661                                                                 
         662                                                                 
         663                           l_w_tot_list_vals-gewei = xvbap-gewei.                                                  
         664                                                                 
         665                           IF NOT xvbap-pstyv IN zzt_free.                                                  
         >>>>>                             ADD xvbap-volum TO l_w_tot_list_vals-volum.                                                  
         667                           ELSE.                                                  
         668                             ADD xvbap-volum TO l_w_tot_list_vals-volum_f.                                                  
         669                           ENDIF.                                                  
         670                           ADD 1 TO l_w_tot_list_vals-zw_nbitem.
    Best Regards,
    BDP
    Edited by: Bansidhar Padhy on Jan 26, 2010 8:24 AM

    ADD xvbap-volum TO l_w_tot_list_vals-volum.
    Declare l_w_tot_list_vals-volum as  "like vbap-volum" or (preferably) "type volum_ap".
    If you're using a packed decimal, you've done something like....  volum(5) type p decimals 2, which is a great way to get an overflow...if you use packed decimals in a program...declare <field> type p decimals <n> without a length attribute, so that SAP can use the full 8 bytes for the calculation.....the put it into a alpha field for display, if needed....

  • While saving multiple attachments from mail, files with same name are added and not replaced

    While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

    Bjørn Larsen a écrit:
    Hi all
    Hope to get some help with Elements Organizer.
    I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
    That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
    Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
    Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
    Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
    I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
    However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
    You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

Maybe you are looking for