Regarding main window in page2

Hi,
My requirement is i have to display basic rent header data in first page and their (Basic item details) in second page.So I am using one main window in page1 and other main window in page2.In page one am getting the main window data finely but am not getting main window in second page where i make a mistake.Please tell me.
Waiting for ur reply........
Regards,
Ali

Hi,
Plz check out this thread;
Main Window in 2nd Page is not displaying.
Hope, it would help you.
with regards,
Mamta Kumari

Similar Messages

Regarding Main Window issue

hi all,
I developed one Smartform Work Order.
My Requirement is after Completion of Main Window some texts like Terms of Payment and Penalty Clause( These we maintained in texts in PO) needs to come.
Suppose i am displaying 10 line items . after completion of 10 line items Terms of payment needs to come and next page should start from first line onwards with whatever ending in the first page. It should not start from middle(beacause we define main window from middle ) and also for every page back side terms & conditions needs to come.
How can we achieve this.
Please suggest.
Regards
Reddy

Hi,
check your previous post
Regarding Page Back in Smartform
You cannot see it in print preview... try to check it by taking print..
Regarding printing of terms and conditions after the line items... you can create a text node after the loop node and print the terms and conditions.
It should not start from middle(beacause we define main window from middle )
I guess this would be difficult to achieve.. i would like to suggest you to trigger a new page with main window height increased not the width of the main window

Regarding Main Window Height

hi all,
I am facing probelm that
I am developing proforma invoice smartform .
how can we adjust dynamically the height of smartform.
Suppose i displayed 4 line items but height of main window is more. it need to adjust to 4 line items.
suppose i displayed 6 line items it needs to adjust 6 line items.
like that.
plz suggest solution.
Regards
Rami Reddy

Ramireddy,
In smartforms, in the main window U have to create the table and then display the line item data in the body of the table . this will solve ur problem as if the number of line item increase then the size of the table increases dynamically.....
Regards...
Edited by: Shakeel Irfan on Jun 25, 2008 8:56 AM
Edited by: Shakeel Irfan on Jun 25, 2008 8:57 AM

Regarding Main Windows ?

Hello,
I have got the task to prepare a smartform which is of 2 pages , my doubt is will the second page must have main window or not.
Thks

Hi,
Main window is not at all mandatory in SMARTFORMS, You may use it or not
SO it depends upon your data.
you can use a main window in as many pages as you want or dont use it at all.
But same data will be printed in all the pages you use MAIN WINDOW
regards
prasanth

Smartforms : Second Page Main Window not being called

Hi All,
The smartform has 2 different pages, with totally different layout.
This also include that the Main window of both pages are different, having 2 different tables to fetch data.
The main window width sizes are the same on both the pages.
I have already used the Command node to call the second page, which it does.
The problem I am facing now is that the Secondary windows on page2 gets displayed, but the main window does not get displayed.
I have put a break-point in the code of main window of Page2. When executing this, it does not get triggered at all.
Now if I change the attribute of this main main window to secondary window and then I execute it then it gets triggered and gets displayed.
I have to keep this window as the main window as there might be chances of data overflow which should then continue printing on the next pages, therefore I cannot make it as the secondary window.
Please tell why the Main Window is not being called? (Note: Size of Main Windowin Page2 is same as main window in Page1)
I have searched the SDN already and did not find a solution to resolve this problem.
Thanks in Advance.
Regards,
Darpana.A

Hi All,
I have got the solution to this probelm.
In Page1 Main Window I have Table1 and a command node to Goto Page2.
Just after this command node I have added Table2 which earlier was the table in Main window of Page2.
So currently the Main window in Page2 has nothing included in it.
Anything after Command gets printed into the next page. Table2 is a part of Main Window in Page1 which gets printed into Main window of Page2.
Thanks for all your replies.
Regards,
Darpana.A
Edited by: Darpana Ahire on Aug 21, 2009 9:59 AM

Calling pages and more than 1 main window

Hi All,
Hi All,
I am designing a Smartform.It contains 2 sections.In 1st section
page1 contains only templates and no main window.On page2 i have
4 dynamic tables which i have included in main window.If the data
is large content of page2 extends to page3.Now the 2nd section begins.I
have to display details of various materials. page4 again contains
templates and no main window.Page5 contains again 4 dynamic tables
and if the data is large it can extend to page6.Ideally these 4 tables
should be included in main window.but i already have 1 main window in
page2.As per my knowledge in 1 smartform there can be only 1 main window.
So please suggest any way to do this.
1 more thing.....
As i said in 2nd section i am displaying details of materials-- page4,
page5,page6 display details of only 1 material.These 3 pages--page4,page5
page6 should repeat for other materials also.
How do i achieve this.
Thanks and Regards,
Shital Chheda.

Hi
The Solution can be achieved but in a different way.
Let the First Page be fired as ur default page and at the end of the first page call the command to go to the 2nd Page.
In the 2nd Page call the Main Window once and print the information for the first Table, this is fine.
After that comes the Second Section, in this i hope that you a single table for printing the material Specific data, the number of lines that can be displayed in a A4 page is approx 70, so you can find out the number of lines remaining to be printed in the page for the table and print data conditionally based on this data.
Hope that Helps
Anirban M.

Smartform - Main window

Hello,
I need to create a smartform with the following behaviour:
When the page shown is the last one, the main window has to take half page. On the other hand, when the page shown is not the last one, its main window has to take almost the whole page (I need a bigger main window).
When only exists one page, the first page is also the last one.
Thanks in advance,
Ricard.

Hello Oscar,
Its Possible, as I feel.
Just need to design 2 pages.
PAGE1: Keep the header and item part as you want to.
PAGE2: copy the MAIN WINDOW of PAGE1 to PAGE2.
             Increase the size of the MAIN WINDOW in page2 .This is the flexibility that smartform gives and
             we don't get this main window resizing facility in SAPscript it remain same in first and second
             page.
Navigate to : loop->table->footer.
Create folder and under folder create window to display your footer details.
And please unckeck the check box "On page break" in the footer condition tab.
Hope the discussion was helpful. Revert back in case of any further issues.
Cheers
Suvendu
Edited by: Suvendu Swain on Jun 9, 2009 5:06 PM

Regarding Main Windowin scripts

Hi to all abap gurus
iam new to abap and my querry is as follows pls dont try to give the links . and i feel so happy if u give exact anwers ?
Querry1:
i have one page( named "page1" )in my script with three windows(logo,adress,main windows) my requirement is to display some dynamic data in the script that is list of orders of the customer whn u give the customer number in selction-screen .then we can go for main window only to dispaly dynamic data ? or is there any other option ? then what should we give as apage number in the next page attribute in the header information. suppose if i dont give "page1" in the next page attribute as anext page what will happen ? i mean that dynamic data will be displayed or not ?
Querry2:
one one more querry incase if we have two pages in my layout .in page1 (3 windows as said above ) and page2 ( only logo and address window ) and no main window in page2. now if we give "page2" as next page in the next page attribute of page1 then that dynamic data will be displayed or not ?
Thanks in Advance
Sunil
Moderator message: please get some basic training on SAPScript, also try things yourself before asking and use correct forum when posting.
Edited by: Thomas Zloch on Jul 13, 2010 2:39 PM

Hi,
/* (s1p&XDIM&,&YDIM&,&MODHEIGHT&,0s24670T
is a commented line.
/* signifies comment.
Kindly reward points by clicking the star on the left of reply,if it helps.
Check this link for more about Barcodes.
http://www.sap-img.com/abap/details-information-about-sap-barcodes.htm
Message was edited by: Jayanthi Jayaraman

Regarding Number of MAIN Windows in SAP Script.

Hi,
SAP Script allows to place a maximum of 99 MAIN Windows. Is it possible to have different content in different MAIN Windows i.e., if i have 2 MAIN Windows in SAP Script with numbers 00 and 01 can i have different contents in these two windows. If possible please give us an example for the same.
Thanks in advance for your esteemed help.
Regards,
Raghavendra Goutham.

HI All,
Thanks for your esteemed replies.
But i want to frame my question exactly.
In my script there are two main windows with number
MAIN 00 and MAIN 01.
MAIN 00
Content:
/E data
abc,,def
In MAIN 01 i want to have only XYZ, some thing like this
MAIN 01
/E total
XYZ
My problem is: whenever i am changing the content in MAIN 01, the content in MAIN 00 is also getting changed.
I do not want this to change, i want different content in both of them. Is this possibel if so how.
Thanks and Regards,
Raghavendra Goutham.
MAIN 01

Regarding vertical lines smartform main window

hi all,
How can i draw vertical lines in Smartforms. I want vertical lines between columns in the main window and i want the lines from top to bottom even if i have just one record in the table data.
how can i solve this using table.
Please reply.
Regards
Rami Reddy

Hi Rami,
Refer these links.
Re: how to draw vertical line in a particular window
http://209.85.175.104/search?q=cache:phjbJwuDWssJ:www.zebra.com/id/zebra/na/en/documentlibrary/misc/sap_smartforms_technical.File.tmp/SAP_SmartForms_V3.pdfHowtodrawverticallinesinsmartform&hl=en&ct=clnk&cd=3&gl=in
Or table tab -> ypu will see a box for table pattern - > click on select
pattern and there u will find many options to draw lines!!!
below your table, you will have the header line type.
double click to select it.
on the right pane, go to attributes
click on the top left button here (select option) ...
in the popup, click the display frame button
select your choice
activate your smart form. this should work
Or
Even you can draw a window as vertical and specify its width as 0
.02.It will automaticall draw a vertical line of specified parameters.
Cheers
Mohinder Singh Chauhan

Problem with printing the pages due to main window

hi experts ,
in my requirement i have 4 pages in smart form.It takes quotation number as input and dispaly all the contracts.
1 potrait
2 potrait
3 landscape
4 landscape
i have used a main window in the second page contains 2 windows for printing address then
one main window for printing contracts, and systems info in two tables .
i have used a main window in the 4 th page too for printing some item details equipment list.
both main windows having same width.
i am getting 1 st & 2nd pages only as o/p if i mention 2nd page in the next page field of first page .
i am getting 1 st 3 rd , 4th , 5th ........pages if i mention 3 rd page in the next page fileld of first page .
i didn't use any extra page to populate if 2nd page is filled completely .
please guide me .
Thanks & regards.
Srikanth

Hi Srikanth,
In the second page you can insert a command to set it to goto page 3,and an additional event in the command (only after the end of main window).
As soon as the main window ends in the second page...u will get the third and rest of the pages.
Keep the goto next page in PAge 1 as Page2
and in Page 2 as Page 2.

Sapscript MAIN window and character separation

Hi all
We have encountered two issues, when we create Form painter.
How we want to create the form is below.
Display 6 fileds below at the top of the paper and at the bottom of the paper with correct character separation.
&REGUP-BELNR&      &REGUP-XBLNR&     &REGUP-BLDAT&      &REGUD-WRBTR&      &W_WSKTO(16T)&     &REGUD-WSKTO&
<Ideal Form>
                                    Check
*ACC doc#54321 Invoice#12345 Date2009/01/01 Amount in invoice1000 Discount30 Sum970*
*ACC doc#54322 "blank"          Date2009/01/02 Amount in invoice1000 Discount00 Sum1000*
*ACC doc#54323 Invoice#12347 Date2009/01/03 Amount in invoice1000 Discount00 Sum1000*
########CHECK DETAIL INFORMATION at the middle part##########
                                                                                Total Check Amount
                                     MICR FONT
*ACC doc#54321 Invoice#12345 Date2009/01/01 Amount in invoice1000 Discount30 Sum970*
*ACC doc#54322 "blank"          Date2009/01/02 Amount in invoice1000 Discount00 Sum1000*
*ACC doc#54323 Invoice#12347 Date2009/01/03 Amount in invoice1000 Discount00 Sum1000*
<Issue>
1. We cannot display two main windows.
What we want to realize is
print 6 fields 2 times in the same form like labels. but right
ex)Display 6 fileds below at the top of the paper and at the bottom of the paper
&REGUP-BELNR&      &REGUP-XBLNR&     &REGUP-BLDAT&      &REGUD-WRBTR&      &W_WSKTO(16T)&     &REGUD-WSKTO&
<Issue 1>
In below, the bottom part (MAIN01) is blank and nothing comes up
                                    Check
MAIN00----
*ACC doc#54321 Invoice#12345 Date2009/01/01 Amount in invoice1000 Discount30 Sum970*
*ACC doc#54322 Date2009/01/02 Amount in invoice1000 Discount00 Sum1000*
*ACC doc#54323 Invoice#12347 Date2009/01/03 Amount in invoice1000 Discount00 Sum1000*
########CHECK DETAIL INFORMATION at the middle part##########
                                                                                Total Check Amount
                                     MICR FONT
MAIN01----
2.When one field is blank, the character separation become different in each row.
ex) In below, doc#54322 has no Invoice# then character space for Invoice# is not blanked but the
space between ACC doc# and Date got really tight
<Issue 2>
MAIN00----
*ACC doc#54321 Invoice#12345 Date2009/01/01 Amount in invoice1000 Discount30 Sum970*
*ACC doc#54322 Date2009/01/02 Amount in invoice1000 Discount00 Sum1000*
*ACC doc#54323 Invoice#12347 Date2009/01/03 Amount in invoice1000 Discount00 Sum1000*
########CHECK DETAIL INFORMATION at the middle part##########
                                                                                Total Check Amount
                                     MICR FONT
MAIN01----
If you know the solution, please let me know
Best regard Masanobu Kubota
Edited by: Koji Yamada on Jan 8, 2009 5:59 AM
Edited by: Koji Yamada on Jan 8, 2009 6:00 AM
Edited by: Koji Yamada on Jan 8, 2009 6:02 AM

Hi,
As per my understanding of the question,
As u need two different pages, i.e. one with a single window n other with 2 windows:
In script create 2 pages:
1.Page1 have main window and sub window
2.Page2 have only main window.
Now in driver program,
call function open-form.
   when scenario 1
      call function start-form for page1
           call function write-form etc.....
      call function end-form
   when scenario 2
      call function start-form for page2
           call function write-form etc.....
      call function end-form
call function close-form.
Hope its clear.
Plz revert back if u get any doubts.

Dynamic Height of Main Window in Smartform

Good day experts...
Actually this problem puzzled me since yesterday when I am developing a customized printout for PO.
Right now, we have an existing form for our PO.. The management asked me to do another PO form for the second company. Thus, there will be two layouts of PO... Since the content are just the same, I just copied the program of our existing PO and make the necessary adjustment for the new layout for our new PO. My problem now is the Main Window for the second PO...
As far as I know, only One main window is allowed in every Page. So what I did was, I created two tables (let say Table 1 and Table 2.) inside the main window. I just placed condtions on the condition tab of both tables that when user selected company A, Table 1 will be displayed. Otherwise Table 2 will be displayed if company B is selected.
Now, I have produced correct output. My only problem now is, the height of the second window which must be shorter than the first PO. I am aware that the main window's height is fixed and cant be changed dynamically.
Before I write this post, I google(search) the net to view some possible solutions. One option that it was suggested is to create another page, say Page2... On that second page, create another main window which is smaller in height.. This would be the second PO. On the main window of the first Page, insert a command line. Then, pinpoint to the second page when the condtion is true.
This technique was not successful when I tried. Since when i try to see the prinout of the PO, the first page is blank and the detail of the PO is on the second page which should NOT be.
Another possible way to solve this problem that I think is , create a separate smartform for the second company. In this case, no worry about the height of the main window. However, my problem that I forsee is, how can I implement on ME23N, to pinpoint two separate smartforms?
Thanks in advance experts... I hope to hear your wonderful ideas...

Hi,
As you are already using smartforms for PO printout(instead of standard form MEDRUCK) , you should have already changed the standard driver program (SAPFM06P) in a zprogram or have done your own driver program which is calling the smartform. So its so simple that you branch your different smartform call in that zprogram. Check which driver program is currently in use in tcode NACE - > Application EF ->Output Type NEU and click processing routine.
Another way is to have a copy of the secondary window and adjust size and give conditions.
Regards
Karthik D

How to limit the size of main window height according to the line items?

Hi,
In my requirement,I created one page with main window in smartforms....Suppose say main window can accomodate 40 line items.
I am getting 5 pages data.And in my last page ( ie 5'th page ) I will have only 20 line items.But for the remaing 20 line items,
it showing empty area .I dont want this empty area .I want that window size to be restricted dynamically to that 20 line items.I created widow with borders and one vertical line between the columns.....I created two columns.
Please I dont want any horizontal lines between the line items but I created one vertical line between the columns..
This is in Smartforms
Any right help would be appreciated.
Thanks,
Chinnu

Hi Abhijit,
                This problem is solved but I have the below another new problem.Can you pls help me in this regard.
            My requirement is to calculate the subtotal of a particular page and to print that subtotal
            at the end of each page.And this subtotal has to be carry forwarded as the first item of the next page(say page2).
            And again at the end of this page(page2) I have to print the subtotal and needs to carry forward this subtotal again on to
            the first item of the page3..
           My problem is I am doing it in a table.I am calculating the subtotal and displaying the subtotal at the footer of the table..
           In the footer again I am redefining table work area values with the text 'Subtotal' and subtotal Amount so that thinking
           that it would print as first line item on the next new page....
          But the problem is I am getting subtotal as 2'nd line item on each new page instead of first line item of each page.........
          Can anyone resolve this issue.........
          I dont want this subtotal to be printed on the last page since I am getting Total of all these subtotals.....
          Below is my required structure
Page 1.
                Desc                               Amount
                x                                      100
                y                                      200
               Subtotal                            300
Page2.(Required page2)
             Desc                               Amount
                a                                      100
                b                                      200
               Subtotal                            600
Page2.(But getting as below,which I dont require )
                Desc                               Amount
                 a                                     100
               Subtotal                            300
                 b                                      200
               Subtotal                            600
Page3.(Required page3)( I dont require Subtotal here on the last page)
             Desc                               Amount
                a                                      100
                b                                      200
               Total                                 900
Any suggestions pls
This is in Smartform
Thanks,
Chinnu

Page break for Smartform with multiple main window on pages

Hi Experts,
I have a requirement for printing 3 pages. The difference among the 3 pages is the main window part.
The main window contains not only internal table, also complicated texts like payment instructions etc.
The requirement is in each page, the data in internal table should be changed, also payment instruction should be changed accordingly.
e.g:
Main Window of Page 1
Part 1 for Internal table
VAT on ITEM ------- 4O-------60,00------0.00%-------EUR
Part 2 for Payment Instructions
Texts for Page 1
Main Window of Page 2
Part 1 for Internal table
VAT on ITEM ------- 5O-------60,00------0.00%-------EUR
Part 2 for Payment Instructions
Texts for Page 2
Main Window of Page 3
Part 1 for Internal table
VAT on ITEM ------- 6O-------60,00------0.00%-------EUR
Part 2 for Payment Instructions
Texts for Page 3
At first, I was using only one page 'Page1' with a variable page_no = 1 as default value, and use program line page_no = page_no + 1 as counter. when page_no = 2, use command for force page break to 'Page1', then under the command, change the internal table and payment instruction texts. when page_no = 3, ...
But I encountered an error saying:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Short text
Jump distance is too large and cannot be generated.
So I created 3 pages, with different main window M_window1, M_window2, M_window3 for each page. In page1, after printing the M_window1, page_no = 2, use command to go to page2, but page2 is never printed. I think this is because only one main window can exist in a smartform? but why smartform allows creating individual main window for different pages? what's the use of such main window?
By the way, what's the use of command for force page break? only work for one main window in a smartform?
Getting back to my requirement, I think I should still use one page and command for page break. I am trying to solve this.
Thanks.
Li Jun Da.

Now I am using 3 pages: Page 1, Page 2, Page 3.
Page 2, Page 3 are copies of Page 1 with main window renamed as second window: mw 2, mw 3.
I also created 2 command nodes in main window of page 1: cmd 2, cmd 3.
cmd 2 is for page break to Page 2, cmd 3 is for page break to Page 3.
The second window mw 2, mw 3 in Page 2, Page 3 can be displayed.
Even though, I still can't understand how main window of pages (not 1st page) can work.

Regarding main window in page2

Similar Messages

Maybe you are looking for