Regarding MAM 2.5 on SAP Web AS 7.0

Hi,
We are planning to install MAM 2.5 app on SAP Web AS 7.0
Please let me know if MAM 2.5 is supported on SAP Web AS 7.0 and any known issues.
Regards
Raja Sekhar

Hello Raja/Gisk
I am trying to configure MAM 2.5 with MI 2.5, under SAP Web AS 7.0. Still I am not successful.
Important thing is, I am not able to access 'Web Console' at all in SAP Web AS 7.0 but I have seen the samething in SAP Web AS 6.4 environment.
My understanding is:
To use Java/J2EE Sync servlet method we need 'WebConsole'.
To use ABAP Sync, we can can use NetWeaver Administrator->Mobile Infrastructure.
As I am not getting Web Console, I am forced to use NWA->Mobile Infrastructure. I am not sure howfar this ABAB Sync would be successful.
My question is:
Are you able to get 'web console' in your SAP Web AS 7.0 Environment. I am thinking 'web console' became obsolete in 7.0 Application Server environment onwards.
Please correct me if I am wrong.
Thanks
Ragavan.

Similar Messages

Regarding download of files from SAP Web AS to mobile device

Hi,
We are writing an asset management application where we need to download files related to work order.
Each work order has some help files which need to be accessed while working on the work order.
Is such a file download possible in SAP Mi.
Regards
Raja Sekhar

hi Raja,
these applications are made for Laptops (for now atleast). they might support/release these applications for other hand held devices also.
i checked on the Mobile Time and Travel. they run only on Laptops. the support for others are not mentioned in the installation & configuration documents that accompany these downloads.
i believe in one of the posts in this forum, a fellow developer was trying to see if MAM was working on a PDA. Check out this Regarding applying patch for MI 2.5 SP14 on MI 2.5 SP13 client.
hope this helps!
Regards
ak.

Doubt regarding SAP WebAs

hi frds,
      1) what is the use of WebAs?
      2) All SAP Components can run in SAP WebAs?
      3) SAP System means SAP WebAS ?
      4) XI Components like IR,IDand SLD..etc reside on SAP WebAS...like this     other SAP Netweaver Components like EP Components also reside in 2 stacks of SAP WebAS?
      5)How the XI Message flows from sender Business system to Receiver Business system via WebAS ? plz give example?
      6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?

hi Murali
<b>1) WAS</b> : SAP Web Application Server is a scalable and reliable component platform. It supports the development and operation of J2EE-based and ABAP-based Web applications and Web services. SAP Web Application Server embraces native Web technologies while providing all the benefits of what has previously been referred to as SAP Basis including the benefits of the proven and scalable data, system, and software lifecycle management capabilities that SAP is known for.
2) The new release of SAP Web Application Server offers full compliance with J2EE 1.3 standard. A completely revamped load-balancing technique highly improves the scalability of the server. Internal persistent information that the system needs to access is now stored in a conventional relational database increasing the robustness and the reliability of the server.
3) SAP System not means SAP WebAS but other parts are also involved
4) yes XI Components like IR,IDand SLD..etc reside on SAP WebAS
5)To know about flow you go through a scenario from TBIT
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?
SAP Web Application Server adds business value because it
●     Allows customers
●     to run any 3rd party J2EE 1.3 compliant application
●     to develop and run their own J2EE 1.3 compliant applications
●     to easily extend SAP solutions on the basis of ABAP and J2EE technology
●     Offers an highly improved load-balancing which results in much better performance and, even more important provides much better scalability
so third party business system is party's own system which is being integrated by SAP XI
for more details on WAS kindly follow this link
http://help.sap.com/saphelp_nw04/helpdata/en/92/7e63423dbc0e53e10000000a155106/frameset.htm
Thanks
sandeep
PS; if helpful reward points

Request for Info regarding MAM 2.5

Hi,
I would like to know the following details regarding MAM2.5
Our client wants to use MAM 2.5 for his mobile configuration. His version of R3 is 4.6B.
1. Does he have to buy MAM2.5 components or can we use it with out any fee. Is MAM mobile component license based on per device.
2. Can we custom tailor the MAM 2.5 hand held application. MAM supports RFID. Can we modify it so that it works with bar codes instead
3. In the functional doc of MAM 2.5,it is mentioned that MAM needs to be configured at R3,Web AS and mobile device. Does he have to buy separate licenses for it. Where is the MAM component fro SAP Web AS available. The Web AS version is 6.4 SP14.
Regards
Raja Sekhar

Hi,
I would like to know the following details regarding MAM2.5
Our client wants to use MAM 2.5 for his mobile configuration. His version of R3 is 4.6B.
1. Does he have to buy MAM2.5 components or can we use it with out any fee. Is MAM mobile component license based on per device.
2. Can we custom tailor the MAM 2.5 hand held application. MAM supports RFID. Can we modify it so that it works with bar codes instead
3. In the functional doc of MAM 2.5,it is mentioned that MAM needs to be configured at R3,Web AS and mobile device. Does he have to buy separate licenses for it. Where is the MAM component fro SAP Web AS available. The Web AS version is 6.4 SP14.
Regards
Raja Sekhar

"SSO" for non-sap web application using SAPGUI to browse?

I have a web application (non SAP) and the user base are also SAP users in an ABAP system.
To strengthen the authentication in the web app, I wanted to implement SSO
authentication as we pity the users for having to remember so many strong pw's and I
dont like LDAP based pw sync or other technology I dont understand, because then we are
just yet another application with the same pw...
We are having technical problems implementing SSO on the web app side, and are anyway a
bit sceptical about the user admin / role admin assignment if we get it to work.
So I have created a transaction in SAP which browses the web app and the intention is to
send the SAP sy-uname as the web app user. We can control this using s_tcode, and
an own auth object on the WAS side and a check on the session type before the connection is
established. In this sense we are dependent on the SAP concept implemented, but even so:
The role assignment is controlled in the web app itself -> so assume that I am not overly
worried about unauthorized access to the web application, as they would not have any
system role for it as their sy-uname does not exist. (Infact we can monitor this)
The browser on the front end is the SAPGUI with html controls on the SAP side.
I would be interested in knowing whether anyone else has experience with this approach, and
whether there are any areas to be carefull of?
I would also like to know whether this is a strategic error?
Kind regards,
Julius

Hi Julius,
well, if that web application would run on the same ABAP backend system then the solution described in <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0612670">SAP Note 612670</a> would be applicable:
a so-called "Re-entrance ticket" (based on the "SAP logon ticket" SSO proceedings) is issued, transported via the SAPGUI connection and back to the system via the invoked HTML control.
But for non-SAP web applications that does not help.
In that case only X.509 client certificates can be used for SSO. Actually, the web application could then also be invoked directly (independent from the SAPGUI session). The user is authenticated based on the X.509 client certificate - and not based on the ABAP userID (of the SAPGUI session).
Well, if you don't mind the effort you could also use the "SAP Logon Ticket evaluation library" (sapssoext, see <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0304450">SAP Note 304450</a>) to evalute the SAP logon ticket externally. You'll then need to have a "stub application" at the ABAP side that triggers the http redirect to your external web application. Not a nice solution but a possible one.
In the future SAML browser artifacts would be an option (preferable to integrate non-SAP applications). But currently that's not available (for NWAS ABAP).
Cheers, Wolfgang

How to change the default operators in sap web ui Search screen?

How to change the default operators in sap web ui Search screen?
For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
I need only "equals" operator. How do i remove the rest of the operators?

There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
Regards,
Harshit

Communication problem between external web server and SAP WebAS

Hello Experts,
We are having a serious problem over here where we had one external server is pushing XML string using a HTTP-POST request to our SAP WebAS server (a BSP application is handling this request). We are not able to see the request coming to SAP i.e. SAP-BSP is not receiving XML.
Also we found that, if request is routed through another proxy server (apache tomcat server redireting the request) connected through VPN to our network, it works but if the the same server is inside our network it doesn't. Rather in that case it never hits the Apache-Tomcat server itself.
We tried to identify the network issue but it seems it is not the network or any firewall issue. When we had a small Echo server (itu2019s a small Java server) running on our SAP machine, we could see the request coming in. So it is definitely reaching the SAP server but the SAP Web AS is not picking up. Rather what we found that if the URL is simple e.g. http://<hostname>:<port> it works but if the URL is complex like something generated by SAP incase of BSP application it doesn't.
Any idea what is causing this issue?
I tried to look at SMICM trace files but got nothing. Any idea where would find the trace of incoming HTTP requests to SAP WebAS?
Thanks in advance.
regards
rajeev

Hi Rajeev,
Pelase find the below link. i am not sure this is the exactly one for you. But i hope it'll help you.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0350917650DB11174011760851503410End?blog=/pub/wlg/10285
http://www.sap-img.com/basis/basis-faq.htm
Regards,
CSK.

How to remove user authentication for SAP Web Service?

Hi there,
I am using SAP Web Services in my flex application. Every time wsdl url is called, the username\password window pops up. I want to remove this.
I searched in the forum and based on the discussions, I tried giving the user name password under Web Service Administration using SOAMANAGER, by selecting No Authentication option. But this did not work. I still get that pop up.
I also tried giving the credentials in SICF, under Logon Data tab of the service. This too failed. I kept getting the pop up.
Can someone pls let me know how can I remove this? If username password in mandatory to be passed, I can create a temporary username which will be used to access all of my webservices and use it. But I want to remove this authentication part when I am using the flex application ang calling the web service url from within it.
Appreciate your help.....
-Deepak

Hi,
It is a little bit tricky, because the interface has changed several times in different releases. I know that it is possible without authentification.
I remember that i defined somewhere the default client, the username and password in the ERP system to use by this web service.
Maybe it helps if you try the old transactions WSADMIN, WSCONFIG or WSADMIN2 ?
Sorry that I cannot help you more. I hope it helps.
Best regards,
Joern

Calling SAP Web Service from BPEL

Hi
I am trying to call a SAP Web Service friom BPEL using the SAP WSDL.It requires a basic authentication (Username/Password) which i am providing as partnerlink properties in bpel.xml.
While testing the BPEL Process from the console, it is giving me an error
"<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Unauthorized</summary>"
But when i am testing it from SOAP UI tool it is giving me the desired response.
Does anyone has any idea why it is failing from BPEL?Is there any configuration which i am missing?
Regards
Ayush

HI Ayush / Suryaveer..
I am stuck at the same situation, trying to invoke a secured SAP webservice. The invoke fails with a security previlege exception.
Am using the basicHeaders property to propagate the credentials to the SAP system.
Can you please suggest on the same.
credential propagation in bpel.xml :
<property name="basicHeaders">propagate</property>
<property name="basicUsername">ABC</property>
<property name="basicPassword">DEF</property>

Consuming a sap web service via jde 4.5.7 (ecc 6.0)

Hi all,
I have a question here, if u could help me, i have to call a sap webeservice via jde , but before i test a jde example by calling a public web service which is not a sap web service , i used to give url as:
connThread.get("http://www.webservicex.net/globalweather.asmx/GetCitiesByCountry?CountryName="Morocco;deviceside=true";
i was not obliged to set the apn parameters and it does work
here as it's mentioned , there is the access point, getcities ... the method name and the parameter name and the parameter value
"Morocco", but i m asking how did we precise the methods of an rfc sap, and the name parmeter and his value.
have u any idea to help me understand how we call sap rfc, method name, parmaeter name, cz i m a newbie to sap and bb.
but now when i try to call an rfc sap , i give the link
connThread.get("http://hca-ecc.hca.group:8000/sap/bc/srt/wsdl/sdef_Z_WS/wsdl11/ws_policy/document?sap-client=800;deviceside=true;apn=hca-ecc.hca.group;tunnelauthusername=forma02;tunnelauthpassword=hcaforma" );
but it's always giving me transmission failed without any error that may help me when debugger run.
Thakx in advance.

Hello Merry,
Have you tried searching 'blackberry' in SDN. I found following and many more links. It gives me impression that you may have to use MDS and also may be SAP Webdynpro technology for UI rendering.
blackberry integration with Mobile Infraestructure
There seems to be special site from blackberry for SAP integration (free registration).
https://www.blackberry.com/CorpDevZone/download/SAP/sap.shtml
Re: Steps to show data on actual Blackberry :) Urgent please....
Hope this will give you some headway in resolving your issues.
Regards,
Vandana.

Unable to install SAP webAS on Windows 2003

Hi Everyone , I am trying to install SAP WebAS Java 6.4. We use an Oracle Database and i want to deploy
our web apps on the SAP WebAS . I get this error during installation :
ERROR 2004-11-09 15:00:39
CJS-00081 Assertion failed: in
function sapdb_sql_query(db_nm, sql_s, db_node) {
var ret_s = "";
var sdbInst = new sdbInstance();
sdbInst.dbName = db_nm;
sdbInst.dbHost = (db_node == undefined) ? installer.getHostName() : db_node;
var r_arr = sdb_sql_query(sql_s, sdbInst);
ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
if (r_arr[0] == "false") {
var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) {
err_msg = err_msg + r_arr[i_cnt];
ASSERT(arguments.callee, false, err_msg);
} else {
end_l = new RegExp("END");
for (i_cnt = 0; i_cnt < r_arr.length; i_cnt++) {
if (end_l.test(r_arr[i_cnt])) {
ret_s = r_arr[i_cnt + 1];
break;
return ret_s;
ERROR EXECUTING SQL QUERY: OKERR-24988,ERR_SQL: sql error-5015,Missing keyword:USERGROUP,TIMEOUT,STANDARD,RESOURCE,REPLICATION,NOT,LIKE,EXCLUSIVE,DBA,COSTWARNING,COSTLIMIT,CACHELIMIT
How do i get over this problem ?
Thanks
Ravi

Hello Ravi,
this problem probably occurred when a SQL user was trying to be created using a password with special characters, but failed.
Could you please copy the last couple of lines of the protocol named 'XCMDOUT.log' into this thread?
Regards,
Roland

ABAP workbench SAP R/3 4.6c to SAP Web AS 6.20

Hi Friends,
can anyone give the links for
Delta ABAP Workbench SAP R/3 4.6c to SAP Web Application Server 6.20 difference
helpful that above will be in pdf format
who so ever i will be thankful for it
thank u
With regards
Vjai

Hello Vijay,
the Workbench is rather a collection of tools than a single one. I don´t know of a delta spec but on the ABAP forum start page some of the tools are described by PDF.
Regards,
Klaus

SAP WEB AS 6.40 Export CDs (3)

Hello there,
I am trying to re-install R/3 Enterprise. However, to the part "Checking Software Packages" for installation of "DB Instance", it asks me for "SAP Web AS 6.40 Export CD 1/3". I currently have Web AS 6.20.
I couldn't find them from "SAP Market Place". Is Web AS 6.40 Export currently Beta version or already out?
Anyone please tell me where I can get it from.
Thank you very much.
thaiba.

Hello Thaiba,
what I've found at http://service.sap.com/swdc -> Installations and Upgrades -> SAP NetWeaver -> SAP NETWEAVER -> SAP NETWEAVER 04 -> Installation & Upgrade
-> OS -> DB was:
DVD SAP NetWeaver 04 SR1 Installation Export
I think that is it.
Regards
Gregor

System Refresh Process of SAP Web AS 6.20 in BW env

We are in the process to refresh our BQA system from the offline backup copy of BPR(Production server). We did it number of times in 4.6 R/3 server successfully in past. We used the oracle backup/restore method for refresh process in R/3. The same oracle backup/restore method we used for BW refresh. But this method is not able to change the schema name in tablespace (in BQA system, tablespace are like PSAPBQAFACT and in BP1 , it is PSAPBP1FACT). Seems to me this is not the right method to refresh SAP Web AS 6.20 and above systems.
Could anyone pls suggest the right documents or if someone has the procedure for refresh process of SAP Web AS 6.20, pls confirm.

Hi Reiner! Thanks for your reply!
- I want to create a secure connection between the .NET client and the SAP Web AS 6.20 Web Service, and HTTPS would be great. Is there any documentation regarding this issue?
- No, I don't want to provide the result of a Web Service as a Web Service. Maybe I was quite unclear... :/ What I meant was:
I want my Web Service to return a table (the result comes in the structure of a table). How do I define the Out-parameter in transaction se37 to accomplish this? Right now the best solution I got was to construct an array of strings (like the ZZVALUES int array in the example) where each position of the array, is a string that has the various fields of the table i want to return concatenated.
I'm able to retrieve the array in Visual Studio .NET 2003 client, and separate the fields (to fill a table again with them). If I could just return the table from SAP and receive it in .NET would be much more simpler.
Thanks again.

SAP WEB AS 6.20 unicode installation question

I am trying to install SAP WEB AS 6.2 unicode version on SAPDB 7.3 on windows 2000 . I get the following error when i try to install the database instance after the succesfully installing the Central instance.
INFO 2004-10-11 22:22:50
'C:\51018821/NT/I386/sdbinst.exe -I C:\sapdb\data -i C:\sapdb\programs -d C:\sapdb\<SID>\DB -b' returned with '0'.
ERROR 2004-10-11 22:22:51
MOS-01082 File system node C:\sapdb\programs\pgm\sapni.dll with type NODE does not exist.
ERROR 2004-10-11 22:22:51
MOS-01105 Processing of one or more file system node operations of table Content of table: tADA_Files Row[0] NodeName="C:\sapdb\programs\pgm\sapni.dll" NodeTarget="C:\SAPinst12\sapni.dll" OpMode="COPY" failed.
ERROR 2004-10-11 22:22:52
FJS-00012 Error when executing script.
When I checked, there is no directory 'C:\sapdb\programs\' created at all.
The XMOD.log file says
Execute Command : c:\sapdb\indep_prog/pgm/dbmcli.exe -d <SID> dbm_version INSTROOT
Execute Session Command : exit
Error! Connection failed to node (local) for database <SID>: dbmsrv not found
What does this mean and what do I have to do to correct it ?

Hello Venkatesh,
could you please tell me which exact SAP DB version you want to install? That's important in this case, because within version 7.3 there's a switch (from a certain Build level) of the SAP DB Installer (used by the sdbinst program).
Additionally, please send me installation protocol of sdbinst, located in the directory C:\sapdb\data\wrk. The name of the file will look something like this:
SAPDB<Installationtype>-<Date>-Time.log
Kind regards,
Roland

Regarding MAM 2.5 on SAP Web AS 7.0

Similar Messages

Maybe you are looking for