Regarding Master Data loading In BI 7.0 for  SD Module

Hi Guys ,
Iam new to BI 7.0 Impln.Can anybody  help me how to load the Master data for cubes like 0sd_c01,0sd_c03.I have activated the MD ds like 0Plant_Attr,0Plant_Text,0Master_attr,0master_text and replicated into BI 7.0.After that i need help from u guys.what are the steps required to activate the Masterdata.
thanks,
Chinnu

Hi Chinnu,
1)By replication I think you mean to say that you now have the datasources 0Plant_Attr,0Plant_Text,0Master_attr,0master_text in BW now.
2)You then have to complete the mapping to the corresponding Infosources
3) activate the infoobjects 0PLANT, 0Master.
4)Load your master data
regards,
Vinay

Similar Messages

  • Regarding master data loading for different source systems

    Hi Friends,
    I have an issue regarding master data loading.
    we have two source systems one is 4.6c and another is ecc 6.0.
    First i am loading the master data from 4.6c to bi7.0.
    Now this 4.6c is upgraded to ecc6.0.
    *In 4.6c and ecc6.0c master data is changing.
    After some time there is no 4.6c, only ecc 6.0 is there.
    Now if i load master data from ecc6.0 to bi7.0 what will happen.
    Is it possible ?
    Could you please tell me?
    Regards,
    ramnaresh.

    Hi ramnaresh porana,
    Yes, its possible. You can load data from ECC.
    Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
    You need to take care of Delta's before and after upgrade.
    Hope it Helps
    Srini

  • Regarding Master Data Loading by using Process Chain

    hai
    can anyone tell me 'step-by-step process and what are processes , process types' are used for loading the Master Data , Transaction into ODS and into Infocube.
    i ll assing maximum points
    bye
    rizwan

    HI Mohammand,
    1. Master Data loading:
    http://help.sap.com/saphelp_nw04/helpdata/en/3d/320e3d89195c59e10000000a114084/content.htm
    2. Transactional data to ODS:
    http://help.sap.com/saphelp_nw04/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
    3. Transactional data to CUBE:
    http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
    Hope it Helps
    Srini

  • Master data loading issue

    Hi gurus,
        Presently i am working on BI 7.0.I have small issue regarding master data loading.
        I have generic data soruce for master data loading.i have to fetch this data to BW side.Always i have to do full data load to the master data object.first time i have scheduled info package and run DTP to load data to master data object, no issues, data got loaded successfully.whenever i run infopacage for second time and run DTP i am getting error saying that duplicated records.
       How can i handle this.
    Best Regards
    Prasad

    Hi Prasad,
    Following is happening in your case:
    <b>Loading 1st Time:</b>
    1. Data loaded to PSA through ipack.It is a full load.
    2. data loaded to infoobject through DTP.
    <b>Loading 2nd Time:</b>
    1. Data is again loaded to PSA. It is a full load.
    2. At this point, data in PSA itself is duplicate. So when you are running the DTP, it picks up the data of both the requests that were loaded to PSA. And hence, you are getting the Duplicate record error.
    Please clear the PSA after the data is loaded to infoobject.
    Assign points if helpful.
    Regards,
    Tej Trivedi

  • Master Data loading got failed: error "Update mode R is not supported by th

    Hello Experts,
    I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
    For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
    "Update mode R is not supported by the extraction API"
    Can anyone tell me what is that error for? how to resolve this issue?
    Regards,
    Nirav

    Hi
    Update mode R error will come in the below case
    You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
    This time the load will fail with update mode R.
    As repeat delta is not supported.
    So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
    example your fiorst delta failed with replication issue.
    only replicating and repeaing will not solve the update mode R.
    you will have to do both replication of the data source and re-int for the update mode R.
    One more thing I would like to add is.
    If the the delat which failed with error the first time(not update mode R), then
    you have to do init with data transfer
    if it failed without picking any records,
    then do init without data transfer.
    Hope this helps
    Regards
    Shilpa
    Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

  • Error in Setting lock for Master Data Load

    Hi Team,
    I encounter the following error while uploading the Masterdata
    "Lock NOT set for: Loading master data attributes
    Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
    I Performed the following steps
    1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
    2) RSATTR->infoobject list-> no infoobject found
    3)Tried after sometime ,but load continue to fail
    Could anyone help to solve the problem
    thanks
    Bala

    Hi Bala,
    Check in SM12 if there are any locks exist with the change run number?
    First check if there are any Master data loads running related to it?
    Check in the Attribute change run screen if there are any change run steps are running?
    Once after checking the above if no locks exist and no master data is running then check the below steps
    1. Run RSA1 transaction
    2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
    3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
    4. Click "Reset Status" button at Run ID 465451241
    NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
    If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
    Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
    It releases all the locks by that change run....and continue with your further work/jobs...
    Regards
    KP

  • Master data Load Failure

    Hi All,
    Could any body clearly explain the following options in the Info Package of master data Info Object with full update
    Update data
    1. PSA and then into Info Obejcts
    2  . Only PSA   ( Update Subsequently in data targets )
          Data source trasfers no duplicate records
         Igonore double data records
    While I am doing master data load with the 1 and 3 options I am getting same no of records updated in PSA but loadng is getting failured with the 1st option (Caller 01 02 .. 20 Messages ) .and request with 3rd option is success..
    Thanks in Advance...
    Regards,
    Nagamani

    Hi
    U r master data might have the Dublicate records
    select the PSA
    and select the option
    Ignore dublicate data records
    IF  you have the Deblicates
    EX
    CNO
    1010
    1020
    1010
    ITs not alowed the 1010 record
    Regards

  • Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

    Hi Experts,
    I am performing master data load through standard DM package with Filter selection as:
    1. Chart of Accounts
    2. Hieararchy selection has 4 hierarchy names
    3. Selected Import Text nodes
    4. Selected Set Filters by Attribute OR Hierarchies
    I have run this DM package for a set of data and selections a week ago and it worked fine.
    However when i run it now, it is giving issues,
    It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
    I am running the DM package in Update and have selection as External.
    Any sugestions for checks / has anyone encountered this issue earlier?
    Regards,
    Shweta Salpe

    Hi Guyz,
    Thanks.
    I found that the issue was with the transformation file where i was maintaining the RATETYPE.
    When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
    however now i do not have Ratetype populated in the system.
    my rate type mapping is:
    RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
    and in conversion file i have TOSKIP     *skip
    I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
    So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
    Regards,
    Shweta Salpe

  • Blank Row in table during Master Data Load

    I am having some success with my master data loads, but when I maintain the master data I have noticed that every table has had a blank row inserted.
    Does anybody know why and what I should do with the row (i.e. delete it)?

    This blank row is by default created and you can no way delete it.  Though you delete it, a new row with blank values will be appended.  This is required for some technical reason while reading the table within ABAP programs. 
    This is applicable only for SAP tables and may not be required for custom developed ones unless you want to use this in screen programs.
    Regards,
    Raj

  • Master data load gives dump with exception CX_RSR_X_MESSAGE

    Hi all,
    I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
    I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
    We are on SP 12 in BI 7.0.
    We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
    with regards,
    Ashish

    Hi,
    The log of the dump is given below.
    Error analysis
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
    and
    therefore caused a runtime error.
    The reason for the exception is:
    No text available for this exception
    Information on where terminated
    Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 78
    of the (Include) program "LRRMSU13".
    Source Code Extract
    Line
    SourceCde
    48
    *... Nachricht an den Message-Handler schicken
    49
    50
    *... S-Meldung wenn kein Handler initialisiert
    51
    DATA: l_type  TYPE smesg-msgty,
    52
    l_zeile TYPE rrx_mesg-zeile.
    53
    CALL FUNCTION 'MESSAGES_ACTIVE'
    54
    IMPORTING
    55
    zeile      = l_zeile
    56
    EXCEPTIONS
    57
    not_active = 1.
    58
    IF sy-subrc NE 0.
    59
    l_type = 'S'.
    60
    ELSE.
    61
    l_type = 'W'.
    62
    ENDIF.
    63
    64
    CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
    65
    EXPORTING
    66
    i_class  = 'BRAIN'
    67
    i_type   = l_type
    68
    i_number = '299'
    69
    i_msgv1  = i_program
    70
    i_msgv2  = i_text.
    71
    ELSE.
    72
    DATA: l_text  TYPE string,
    73
    l_repid TYPE syrepid.
    74
    75
    l_repid = i_program.
    76
    l_text  = i_text.
    77
    >>>>>
    RAISE EXCEPTION TYPE cx_rsr_x_message
    79
    EXPORTING text = l_text
    80
    program = l_repid.
    81
    ENDIF.
    82
    83
    ENDFUNCTION.
    I went to SM21 and went through the system log.  There was a log with the following text  ORA-20000: Insufficient privileges#ORA-06512: at
    "SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
    I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
    I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
    Thanks Oliver and Oscar, for replying.
    regards,
    Ashish

  • Error in 0EMPLOYEE Master Data Load Issue

    Hi,
    We have 0EMPLOYEE Master Data. Due to our new development changes ralted to 0EMPLOYEE, we have scheduled 2 new info packages with Personnel number range. While creation of infopackages, we forget to main time interval from 01.01.1900 to 31.12.9999. Instead of this, the default range was selected as 24.04.2009 to 31.12.9999. Because of this selection in InfoPackage, the Employee Master Data Valid from date was changed to 24.04.2009 for all the employees in the master data after the data load.
    Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
    Can you please advice, how can we fix this issue ASAP as its a production issue?
    Thanks!
    Best regards,
    Venkata

    > Even after i change this selection properly and loading the data also, its not correcting with correct valid from dates.
    May be for this you have the ONLY option to delete 0Employee master data and reload it again. For this you need to delete dependent transaction data also.
    Cheers,
    Sree

  • BI Statistics Master Data Load

    Hi,
    We are implementing BI Statistics and BI Administration Cockpit.  One of the OSS Note 934848 mentions that I have to install/activate all the datasources that are under the Application Component BW_TECH --> TCT.
    My question is do I have to consider loading the master data for all those datasources/infoobjects ?  There are nearly 80 - 100 datasources.
    The note 934848 mentions to install the Business Content Process Chains.  And I see that those process chains are hardly loading 10 - 12 master data loads.  Is it OK if I just make use of those business content process chains to load master data ?
    Initially I have created DTP's and Transformations to load master data for approx 50 objects.  Later I came to know that BI statistics Cubes etc follow the 3.x format and I should use those as it is delivered.  So, can't I still make use of the 7.0 converted datasourse objects with DTP to load the data ?
    -or- do I have to delete all the transformations and DTP's and migrate all those DataSources back to 3.x ?
    Thanks,

    Hi Sesh,
    1. Yes you need to activate all those Datasources. Its better to activate all of them as in BI 7.0 TCT infoproviders are used as basis for Workload monitor ST03 also in addition to Admin cockpit.
    2. Its sufficient to just load the master data using the standard process chains (Init chains once followed by delta chains.
    3. Its recommended to use the TCT content as 3.x only.
    4. No need to migrate the 3.x content, just use as it is.
    for more information you can refer to this <a href="https://forums.sdn.sap.com/thread.jspa?threadID=279998&tstart=0">thread</a> and related posts by <a href="https://forums.sdn.sap.com/profile.jspa?userID=2035002&start=0">Rajani Saralaya K</a>
    Assign points if helpful,
    Regards, Uday

  • Bi admin process chains-  content master data load has failed

    Hi Experts,
    i worked with Bi Admin cockpit set-up, all  the things are going fine
    but Content Master data load (Attribute)has failed and i got the errors like
    1)data records for package 1 selected in PSA-2 errors
    2)Error 4 in the update
    can anyone suggest me how can i sove the issue
    regards
    Mrudula

    Hi
    yes, i got 2 errors in Psa
    when i click the 1st error i got like
    Data record 10023 & with the key
    'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_Ptest0001 &' is invalid in value
    'EBTCLNT100ACGRAZ_BWRPRT_USR_FBW_attribute/characteristic 0TCTBWOBJECT &.
    And i it gave the procedure as
    if this message appears during a data load, maintain the attribute in the PSA maintenance screens. if this message appears in the master data maintenance screens, leave the transaction and call it again. this allows you to maintain your master data.
    And when i click the 2nd error
    it has showed the data record as 10024 and remaing explanation is same like 1st one
    in this i am not getting, how to proceed the solution.
    plz help me anyone
    Thanks and regards
    Mrudula
    Edited by: mrudularajesh on Jul 1, 2009 7:39 AM

  • Sap bw 7.3 master data load error

    sap bw 7.3 master data load error
    erroe: Exception in Substep Rules

    Hi Jayram,
    I am assuming that you are getting this error when you are loading data from PSA to IO. If so, the error might be because of
    1. Duplicate records
    PSA might have duplicate records. But you will be able to load only one record to Master data IO. In DTP Update tab, there is an option for "Handle Duplicate Record Keys" . Just enable this & try to load again.
    2. Erroneous records.
    Some special reocrds are allowed in PSA where as thye might not be allowed in Master Data/Data Targets like Lower case letters/ some speacial characters etc. If error is because of this, then you might need to correct the data at PSA level & reload the data to Master data. Else get it corrected in source system itself & fetch the data to BW. Or write some code to take care of these special characters.
    Hope it helps!
    Regards,
    Pavan

  • Regarding master data doubt

    hi everybody,
    i have a basic doubt,shall we go for delta update in case of master data loading,or only full update we have to do.
    sorry for asking shuch an basic doubt.
    it will be better if any body can give some issue faced in mastre dat loading through process chai.
    Thanks & regard
    sk

    Hi,
    We can even use Delta infopackages for Master data.
    There is nothing wrong using it.
    We are using some delta MD IPs in our process chains.
    These IPs usually pick less no. of records as there will be rare changes in such master datas.
    Regards,
    Kalpana M.

Maybe you are looking for