Regarding: material report

Hi,
I am making a report in ehihc i have to display the minimum,maximum,reorder point and stock level of a material .
plzz tell me the tables where i can have these data as i want to display the cureent status of stock level .
reagrds,
ric.s
Edited by: ric .s on May 5, 2008 7:30 AM

hiii,
hopefully you are creating report regarding the MM module.
try for the tables -
MARA     Inventory Master
MARC     Plant Data
MARD     Current Inventory
MAKT     Descriptions
MBEW     Material Valuation
T179     Product Hierarchy
MVKE     Sales data (materials)
MKPF     Material document
if helpful ,,,assing points...
thanks....

Similar Messages

If a material reports to two higher level assemblies in the BOM /Is there a

Hi,
If a material reports to two higher level assemblies in the BOM would creates two planned orders for it. Each of the orders has a different date?
For example
Z is final assembly
In that Y is one assembly in that says X1material in level 2
And the again same material X1 is reporting to Y in levels 5 so here my question is it would create two planned order with different dates?
And
Is there any report to see confirmed time to say machine time / labor time or shall we go for report.
Thx....Srini

Srini,
CS15 can be usefull to check the usage of component in assemblies.
if its used then more then once it can be easily located through this report.
another concern what you expressed is not clear.
But what i understand is same component is used at level 2 and level 4 of a BOM.
assumption from the word levels is , X is used in level 2 its used directly in BOM of Y and Y have some differnt component G which inturn again have X in it .
so at both this levels if the dependent requirement is different, you can get 2 differnet orders use individual /collective indicvator for this material as individual .
If your concern is for BOM position (Item Number) field in BOM then system will create a single plan order even if you set it for individual requirement in material master.here some work around can be possible by maintaining lead time offset IN BOM in item detail screen.
check and come back
Hope it helps you
Regards
Ritesh

Regarding Interactive reports

Hi All,
Yesterday i submitted a query regarding Interactive reports.and i recieved lots of reply .But the replies are all about ALV interactive report.I want to know just about the interactive reports where ew use AT LINE OF SELECTION, HIDE e.c.
PLZ send methe documents related that.
Thanks and Regards
RASHMI

Hi
Interactive Reports
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers. And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21). Events associated with Interactive Reports are: 1. AT LINE-SELECTION 2. AT USER-COMMAND 3. AT PF<key> 4. TOP-OF-PAGE DURING LINE-SELECTION. HIDE statement holds the data to be displayed in the secondary list. sy-lisel : contains data of the selected line. sy-lsind : contains the level of report (from 0 to 21)
Interactive Report Events:
AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
AT PFn: For predefined function keys...
AT USER-COMMAND : It provides user functions keys.
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Regarding MB59 report output.

Hi PP Gurus,
Ii is possible to get following in MB59 output using some variant/infostructure creation?
1. Stock on hand
2. Stock issued
3. Stock in Quality inspection
4. Stock scrapped
Thanks & Regards,
Abu Arbab

Dear Abu,
You can get the details regarding material issue and good's scrapped using the report MB59,stock in quality inspection does
not reflect in this report.
Come back with your further queries.
Also have a look on the report MB5B.
Regards
Mangalraj.S

Rejected material report

Hi buddies,
How to have plantwise rejected material report?
Kind Regards.

Rohit,
UD code is Usage Decision code.
Once the inspection is completed then you need to perform the UD and tehn stock posting to release the stock from Quality to Unrestricted/Block/Scrap/sample etc. Now there be different UD codes will be there,
E.g. Accept for Unrestricted
Reject to Block/Scrap
And in this layout QA32/33, in change layout all these field will appear to you. So where ever the UD code will be representing the Block stock it can be easily traced out.by incorporating these fields in the QA32/33 layout.
Try it and revert if there is any discrepancy.
Regards,
Shyamal

Help needed regarding ALV report

Hi,
I have a query regarding ALV report.
The requirement is as follows:-
When the user executes the ALV report and if he sums one numeric field column values and filters out some of the field columns ( for example there r 5 columns in the report and the user has filtered out 2 of them and viewing only 3 columns)
and now the requirements is that when the user runs the report later he should see the modified report ( i mean only 3 cloumns and the total value of the column which he has made) but not the original output which was there when the report was developed.
First of all i wanna know is it possible to do r not. If yes then how
Hope u have got what i want.
eagerly waiting for ur reply.
regards,
maqsood

Hi
Yes you can! You have to manage the layout variant.
So when you call your ALV you have to set the parameter I_SAVE = 'A'.
In this way you'll allow the user to save the variants for layout.
After you has to have a chance to choose the variant in selection-screen.
See the demo program BCALV_GRID_11 to manage the variant in selection-screen.
Max

EXCISE RAW MATERIAL REPORT

Hello to evrybody,
can anybody plz tell me wat is exactly excise raw material report .
concept
calculations like opening bal opening value etc.
its urgent.
thnx
Fozia

THis is a duplicate question please close it.

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

Query regarding Crystal Reports Server

Hi,
I am new to Crystal Reports.
I have created a couple of .rpt files using CR2008 and I am loading these report files in my aspx pages using CrystalReportViewer control.
I am planning to host my webApp on IIS in production environment. Maximum simultaneous/concurrent connections to my reports would be 1 or 2.
My question is:
1. Do I need Crystal Reports Server in this scenario?
2. In future if the number of concurrent users to report increases then do I need to go for Crystal Reports Server? Will just buying and installing the Crystal reports server on production server work? or will I have to do some configuration or some other changes in the existing deployed reports? OR Will I have to deploy my existing reports on Crystal Report Server again?
Any help will be highly appreciated.
Thanks in advance,
Manish

Manish, please do not cross post:
Query regarding Crystal Reports Server
See the [Rules of Engagement|http://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for more details.
Marking this thread as answered and locking...
- Ludek

IDOC Process And regarding material

Hi,
I want learn about IDOC In ABAP . So please send me the process of IDOC and the regarding material.

Check out the following links:
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
http://www.erpgenie.com/sapedi/idoc_abap.htm#Updating%20IDoc%20data%20in%20segments
http://help.sap.com/saphelp_47x200/helpdata/en/78/21750b51ce11d189570000e829fbbd/frameset.htm
Please do assign points if useful
Regards
Aravind

ALE Process And regarding material

Hi,
I want learn about ALE's In ABAP . So pleasesend me the process of ALE and the regarding material.

Hello Nagaraju,
The following links will give you complete idea about ALE,
<a href="http://help.sap.com/saphelp_46c/helpdata/en/c9/d97749ae0311d1a5120060087832f8/frameset.htm">ALE in Business Process</a>
<a href="http://help.sap.com/saphelp_46c/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm">What is ALE and how it works?</a>
Hope this helps.
Regards
Arif Mansuri

Question regarding material for Forms and Reports

Hi, I'm good at SQL, now that i would like to learn Forms and Reports in Database. But i dont know like where to start and how to start. Could someone please help me out like what i need to do to learn them. As i said i'm very much new to these concepts.
Thanks in advance

Hello,
if buying abook is an option for you and you are speaking german I would advise you to get
Perry Pakull, Stefan Jüssen, Walter H. Müller:
"Praktische Anwendungsentwicklung mit Oracle Forms", HANSER Verlag ISBN-10: 3-446-41098-8. Have a look at
[http://www.hanser.de/buch.asp?isbn=978-3-446-41098-5&area=Computer|http://www.hanser.de/buch.asp?isbn=978-3-446-41098-5&area=Computer]
Regards
Mario

URGENT: - REGARDING ALV REPORT

hi,
    i had made dis report in ALV and i want to display d heading format as follows:-
        NAME:- TEST PROGRAM
        date: - 21.05.2007
        time:- 1:30:23 am
moreover i want to see the print perview of it but it is giving runtime error.
plz help me in solving dis problem and he or she will be definately rewarded..
*& Report ZMFTEST5
REPORT ZMFTEST5 no standard page heading LINE-SIZE 310.
TABLES : VBAK,ABAP,VBEP,VBKD,MARA,KNA1,MAKT.
*Varriable declaration.
TYPE-POOLS SLIS.
DATA : POS TYPE I.
DATA REPID LIKE SY-REPID.
DATA : F1 TYPE SLIS_T_FIELDCAT_ALV,
F2 TYPE SLIS_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA L_POS TYPE I VALUE 1. "position of the column
DATA GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: GT_EVENTS TYPE SLIS_T_EVENT,
FS_EVENTCAT LIKE LINE OF GT_EVENTs.
DATA : T_HEADING TYPE slis_t_listheader.
INTERNAL TABLE FOR SALES ORDER *****************
DATA : BEGIN OF ITSO OCCURS 0,
VBELN LIKE VBAK-VBELN,
ERDAT LIKE VBAK-ERDAT,
BSTNK LIKE VBAK-BSTNK,
KUNNR LIKE VBAK-KUNNR,
MATNR LIKE VBAP-MATNR,
POSNR LIKE VBAP-POSNR,
WMENG LIKE VBEP-WMENG,
NTGEW LIKE MARA-NTGEW,
BRGEW LIKE MARA-BRGEW,
GEWEI LIKE MARA-GEWEI,
SPART LIKE VBAK-SPART,
BMENG LIKE VBEP-BMENG,
EDATU LIKE VBEP-EDATU,
BSTKD LIKE VBKD-BSTKD,
WERKS LIKE VBAP-WERKS,
MEINS LIKE MARA-MEINS,
KWMENG LIKE VBAP-KWMENG,
KLMENG LIKE VBAP-KLMENG,
BALQTY LIKE VBAP-KLMENG,
SOGWT LIKE MARA-BRGEW,
SONWT LIKE MARA-BRGEW,
SINWT LIKE MARA-BRGEW,
BALGWT LIKE MARA-BRGEW,
BALNWT LIKE MARA-BRGEW,
DISPNWT LIKE MARA-BRGEW,
PARTYNAME LIKE KNA1-NAME1,
ITEMDESC LIKE MAKT-MAKTX,
STATUS TYPE C,
END OF ITSO.
DATA:B_QTY TYPE P LENGTH 7 DECIMALS 3.
***********PARAMETERS***************
PARAMETERS : PLANT LIKE VBAP-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : SO_ORD FOR VBAK-VBELN,
SO_PARTY FOR VBAK-KUNNR,
IT_M FOR MARA-MATNR,
DIV FOR VBAK-SPART,
SO_DATE FOR VBAK-ERDAT,
S_DATE FOR VBEP-EDATU.
START-OF-SELECTION.
SELECT DISTINCT A~VBELN A~ERDAT A~BSTNK A~KUNNR B~SPART B~MATNR B~POSNR B~WERKS B~KWMENG B~KBMENG C~NTGEW C~BRGEW C~GEWEI D~WMENG D~BMENG D~EDATU D~VBELN
FROM VBAK AS A INNER JOIN VBAP AS B ON B~VBELN = A~VBELN
INNER JOIN MARA AS C ON C~MATNR = B~MATNR
INNER JOIN VBEP AS D ON D~WMENG > 0 AND D~VBELN = A~VBELN AND D~POSNR = B~POSNR
INTO CORRESPONDING FIELDS OF TABLE ITSO
WHERE A~VBELN IN SO_ORD AND A~KUNNR IN SO_PARTY AND B~SPART IN DIV AND A~ERDAT IN SO_DATE AND D~EDATU IN S_DATE AND B~MATNR IN IT_M AND B~WERKS = PLANT.
IF SY-SUBRC <> 0.
MESSAGE E899(M3) WITH 'No records'.
ENDIF.
DATA : V_NETWT LIKE MARA-NTGEW,
       V_GRWT LIKE MARA-NTGEW,
       V_SOSTAT TYPE C.
LOOP AT ITSO.
if ITSO-bmeng = 0.
    V_SOSTAT = 'A'.
ELSEIF ITSO-WMENG <> ITSO-BMENG.
    V_SOSTAT = 'B'.
ELSE.
    V_SOSTAT = 'C'.
ENDIF.
IF ITSO-GEWEI = 'G'.
    V_NETWT = ITSO-NTGEW / 1000.
    V_GRWT = ITSO-BRGEW / 1000.
ELSEIF ITSO-GEWEI = 'KG'.
    V_NETWT = ITSO-NTGEW.
    V_GRWT = ITSO-BRGEW.
ELSEIF ITSO-GEWEI = 'TO'.
    V_NETWT = ITSO-NTGEW * 1000.
    V_GRWT = ITSO-BRGEW * 1000.
ENDIF.
ITSO-STATUS = V_SOSTAT.
ITSO-SOGWT = V_GRWT * ITSO-WMENG / 1000.
ITSO-SONWT = V_NETWT * ITSO-WMENG / 1000.
ITSO-SINWT = V_GRWT * ITSO-BMENG / 1000.
ITSO-BALGWT = V_GRWT * ( ITSO-WMENG - ITSO-BMENG ) / 1000.
ITSO-BALNWT = V_NETWT * ( ITSO-WMENG - ITSO-BMENG ) / 1000.
ITSO-DISPNWT = V_NETWT * ITSO-BMENG / 1000.
ITSO-BALQTY = ITSO-WMENG - ITSO-BMENG.
SELECT SINGLE NAME1 FROM KNA1 INTO ITSO-PARTYNAME WHERE KUNNR = ITSO-KUNNR.
SELECT SINGLE MAKTX FROM MAKT INTO ITSO-ITEMDESC WHERE MATNR = ITSO-MATNR.
MODIFY ITSO.
ENDLOOP.
perform f_build_eventcat.
PERFORM LAYOUT using t_heading.
END-OF-SELECTION.
FORM LAYOUT using t_heading type slis_t_listheader.
data : t_event    type slis_t_event.
PERFORM FCAT USING 'WERKS'     'ITSO' '' 'PLANT '               'WERKS'     'VBAP' ''.
PERFORM FCAT USING 'VBELN'     'ITSO' '' 'SO NO. '              'VBELN'     'VBAK' ''.
PERFORM FCAT USING 'ERDAT'     'ITSO' '' 'S.O.DATE'             'ERDAT'     'VBAK' ''.
PERFORM FCAT USING 'BSTNK'     'ITSO' '' 'P.O.N.O.'             'BSTNK'     'VBAK' ''.
PERFORM FCAT USING 'KUNNR'     'ITSO' '' 'PARTY '               'KUNNR'     'VBAP' ''.
PERFORM FCAT USING 'PARTYNAME' 'ITSO' '' 'PARTY DESCRIPTION'    'PARTYNAME' ''     ''.
PERFORM FCAT USING 'ITEMDESC' 'ITSO' '' 'MATERIAL DESCRIPTION' 'ITEMDESC' ''     ''.
PERFORM FCAT USING 'MATNR'     'ITSO' '' 'MAT.NO. '             'MATNR'     'MARA' ''.
PERFORM FCAT USING 'POSNR'     'ITSO' '' 'LINE.ITEM'            'POSNR'     'VBAP' ''.
PERFORM FCAT USING 'WMENG'     'ITSO' '' 'S.O.QTY'              'WMENG'     'VBEP' '' .
PERFORM FCAT USING 'EDATU'     'ITSO' '' 'SCH.DATE'             'EDATU'     'VBEP' ''.
PERFORM FCAT USING 'SONWT'     'ITSO' '' 'S.O.NWT '             'P'         ''     ''.
PERFORM FCAT USING 'SOGWT'     'ITSO' '' 'S.O.GWT '             'P'         ''     ''.
PERFORM FCAT USING 'SPART'     'ITSO' '' 'DIV    '              'SPART'     'VBAP' ''.
PERFORM FCAT USING 'BMENG'     'ITSO' '' 'DISP.QTY'             'BMENG'     'VBEP' ''.
PERFORM FCAT USING 'DISPNWT'   'ITSO' '' 'DISP.NT.WT '          'P'         ''     ''.
PERFORM FCAT USING 'BALQTY'    'ITSO' '' 'BAL.QTY.'             'P'         ''     ''.
PERFORM FCAT USING 'BALNWT'    'ITSO' '' 'BAL.NT.WT '           'P'         ''     ''.
PERFORM FCAT USING 'BALGWT'    'ITSO' '' 'BAL.GR.WT '           'P'         ''     ''.
PERFORM FCAT USING 'STATUS'    'ITSO' '' 'STATUS'               'STATUS'    ''     ''.
refresh t_event.
*perform set_top_page_heading using t_heading t_event.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                =
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                = REPID
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
   I_CALLBACK_TOP_OF_PAGE            = ' '
I_CALLBACK
I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
IT_FIELDCAT                       = F1
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
IT_SORT                           =
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         = GT_EVENTS[]
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_ADD_FIELDCAT                   =
IT_HYPERLINK                      =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IT_EXCEPT_QINFO                   =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
   T_OUTTAB                          = ITSO
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
ENDFORM. " LAYOUT
*& Form FCAT
FORM FCAT USING P_FIELD P_TABLE P_SUM P_TEXT P_RFIELD P_RTABLE P_DISP.
ADD 1 TO POS.
F2-COL_POS = POS.
F2-FIELDNAME = P_FIELD.
F2-TABNAME = P_TABLE.
F2-SELTEXT_L = P_TEXT.
F2-REF_FIELDNAME = P_RFIELD.
F2-REF_TABNAME = P_RTABLE.
F2-DO_SUM = P_SUM.
F2-NO_OUT = P_DISP.
APPEND F2 TO F1.
CLEAR F2.
ENDFORM. " FCAT
FORM F_BUILD_EVENTCAT .
CLEAR: GT_EVENTS. REFRESH: GT_EVENTS.
CLEAR: FS_EVENTCAT.
FS_EVENTCAT-NAME = 'TOP_OF_PAGE'.
FS_EVENTCAT-FORM = 'F_REPORT_HEADER_ALV'.
APPEND FS_EVENTCAT TO GT_EVENTS.
CLEAR: FS_EVENTCAT.
FS_EVENTCAT-NAME = 'END_OF_LIST'.
FS_EVENTCAT-FORM = 'F_WRITE_SUMMARY'.
APPEND FS_EVENTCAT TO GT_EVENTS.
ENDFORM.
*FORM F_REPORT_HEADER_ALV.
*CALL FUNCTION 'Z_HEAD_PRINT'
EXPORTING
WRITE: / TITLE1 = 'XYZ Limited'
TITLE2 = 'Sales Order Report'
TITLE3 = 'Created on '
COLOR = 'X'.
*ENDFORM.
FORM F_WRITE_SUMMARY .
write:/ 'Welcome to XYZ Limited'.
write:/ 'This is a test program to display Report in ALV Format'.
ENDFORM.
*&      Form set_top_page_heading
      text
     -->P_T_HEADING text
*form set_top_page_heading using    t_heading
                                   t_events type slis_t_event.
*data: x_heading type slis_listheader,
     x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = ''(001).
append x_heading to t_heading.
t_heading-info = 'TEST'.
t_heading-typ = 'H'.
Program name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Program: '.
x_heading-info = sy-repid.
append x_heading to t_heading.
User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.
Date of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
write sy-datum to x_heading-info.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
write sy-uzeit to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
*endform.                    " set_top_page_heading

Hi,
i had change ur code just copy this and try,i hope it will work.
REPORT ZMFTEST5 no standard page heading LINE-SIZE 310.
TABLES : VBAK,ABAP,VBEP,VBKD,MARA,KNA1,MAKT.
*Varriable declaration.
TYPE-POOLS SLIS.
DATA : POS TYPE I.
DATA REPID LIKE SY-REPID.
****************CHANGES**************
DATA : FDATE TYPE STRING,
       FTIME TYPE STRING,
       FNAME TYPE STRING.
****************CHANGES**************
DATA : F1 TYPE SLIS_T_FIELDCAT_ALV,
F2 TYPE SLIS_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA L_POS TYPE I VALUE 1. "position of the column
DATA GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: GT_EVENTS TYPE SLIS_T_EVENT,
FS_EVENTCAT LIKE LINE OF GT_EVENTs.
DATA : T_HEADING TYPE slis_t_listheader.
INTERNAL TABLE FOR SALES ORDER *****************
DATA : BEGIN OF ITSO OCCURS 0,
VBELN LIKE VBAK-VBELN,
ERDAT LIKE VBAK-ERDAT,
BSTNK LIKE VBAK-BSTNK,
KUNNR LIKE VBAK-KUNNR,
MATNR LIKE VBAP-MATNR,
POSNR LIKE VBAP-POSNR,
WMENG LIKE VBEP-WMENG,
NTGEW LIKE MARA-NTGEW,
BRGEW LIKE MARA-BRGEW,
GEWEI LIKE MARA-GEWEI,
SPART LIKE VBAK-SPART,
BMENG LIKE VBEP-BMENG,
EDATU LIKE VBEP-EDATU,
BSTKD LIKE VBKD-BSTKD,
WERKS LIKE VBAP-WERKS,
MEINS LIKE MARA-MEINS,
KWMENG LIKE VBAP-KWMENG,
KLMENG LIKE VBAP-KLMENG,
BALQTY LIKE VBAP-KLMENG,
SOGWT LIKE MARA-BRGEW,
SONWT LIKE MARA-BRGEW,
SINWT LIKE MARA-BRGEW,
BALGWT LIKE MARA-BRGEW,
BALNWT LIKE MARA-BRGEW,
DISPNWT LIKE MARA-BRGEW,
PARTYNAME LIKE KNA1-NAME1,
ITEMDESC LIKE MAKT-MAKTX,
STATUS TYPE C,
END OF ITSO.
DATA:B_QTY TYPE P LENGTH 7 DECIMALS 3.
***********PARAMETERS***************
PARAMETERS : PLANT LIKE VBAP-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : SO_ORD FOR VBAK-VBELN,
SO_PARTY FOR VBAK-KUNNR,
IT_M FOR MARA-MATNR,
DIV FOR VBAK-SPART,
SO_DATE FOR VBAK-ERDAT,
S_DATE FOR VBEP-EDATU.
START-OF-SELECTION.
SELECT DISTINCT A~VBELN A~ERDAT A~BSTNK A~KUNNR B~SPART B~MATNR B~POSNR B~WERKS B~KWMENG B~KBMENG C~NTGEW C~BRGEW C~GEWEI D~WMENG D~BMENG D~EDATU D~VBELN
FROM VBAK AS A INNER JOIN VBAP AS B ON B~VBELN = A~VBELN
INNER JOIN MARA AS C ON C~MATNR = B~MATNR
INNER JOIN VBEP AS D ON D~WMENG > 0 AND D~VBELN = A~VBELN AND D~POSNR = B~POSNR
INTO CORRESPONDING FIELDS OF TABLE ITSO
WHERE A~VBELN IN SO_ORD AND A~KUNNR IN SO_PARTY AND B~SPART IN DIV AND A~ERDAT IN SO_DATE AND D~EDATU IN S_DATE AND B~MATNR IN IT_M AND B~WERKS = PLANT.
IF SY-SUBRC <> 0.
MESSAGE E899(M3) WITH 'No records'.
ENDIF.
DATA : V_NETWT LIKE MARA-NTGEW,
V_GRWT LIKE MARA-NTGEW,
V_SOSTAT TYPE C.
LOOP AT ITSO.
if ITSO-bmeng = 0.
V_SOSTAT = 'A'.
ELSEIF ITSO-WMENG <> ITSO-BMENG.
V_SOSTAT = 'B'.
ELSE.
V_SOSTAT = 'C'.
ENDIF.
IF ITSO-GEWEI = 'G'.
V_NETWT = ITSO-NTGEW / 1000.
V_GRWT = ITSO-BRGEW / 1000.
ELSEIF ITSO-GEWEI = 'KG'.
V_NETWT = ITSO-NTGEW.
V_GRWT = ITSO-BRGEW.
ELSEIF ITSO-GEWEI = 'TO'.
V_NETWT = ITSO-NTGEW * 1000.
V_GRWT = ITSO-BRGEW * 1000.
ENDIF.
ITSO-STATUS = V_SOSTAT.
ITSO-SOGWT = V_GRWT * ITSO-WMENG / 1000.
ITSO-SONWT = V_NETWT * ITSO-WMENG / 1000.
ITSO-SINWT = V_GRWT * ITSO-BMENG / 1000.
ITSO-BALGWT = V_GRWT * ( ITSO-WMENG - ITSO-BMENG ) / 1000.
ITSO-BALNWT = V_NETWT * ( ITSO-WMENG - ITSO-BMENG ) / 1000.
ITSO-DISPNWT = V_NETWT * ITSO-BMENG / 1000.
ITSO-BALQTY = ITSO-WMENG - ITSO-BMENG.
SELECT SINGLE NAME1 FROM KNA1 INTO ITSO-PARTYNAME WHERE KUNNR = ITSO-KUNNR.
SELECT SINGLE MAKTX FROM MAKT INTO ITSO-ITEMDESC WHERE MATNR = ITSO-MATNR.
MODIFY ITSO.
ENDLOOP.
perform f_build_eventcat.
PERFORM LAYOUT using t_heading.
END-OF-SELECTION.
FORM LAYOUT using t_heading type slis_t_listheader.
data : t_event type slis_t_event.
PERFORM FCAT USING 'WERKS' 'ITSO' '' 'PLANT ' 'WERKS' 'VBAP' ''.
PERFORM FCAT USING 'VBELN' 'ITSO' '' 'SO NO. ' 'VBELN' 'VBAK' ''.
PERFORM FCAT USING 'ERDAT' 'ITSO' '' 'S.O.DATE' 'ERDAT' 'VBAK' ''.
PERFORM FCAT USING 'BSTNK' 'ITSO' '' 'P.O.N.O.' 'BSTNK' 'VBAK' ''.
PERFORM FCAT USING 'KUNNR' 'ITSO' '' 'PARTY ' 'KUNNR' 'VBAP' ''.
PERFORM FCAT USING 'PARTYNAME' 'ITSO' '' 'PARTY DESCRIPTION' 'PARTYNAME' '' ''.
PERFORM FCAT USING 'ITEMDESC' 'ITSO' '' 'MATERIAL DESCRIPTION' 'ITEMDESC' '' ''.
PERFORM FCAT USING 'MATNR' 'ITSO' '' 'MAT.NO. ' 'MATNR' 'MARA' ''.
PERFORM FCAT USING 'POSNR' 'ITSO' '' 'LINE.ITEM' 'POSNR' 'VBAP' ''.
PERFORM FCAT USING 'WMENG' 'ITSO' '' 'S.O.QTY' 'WMENG' 'VBEP' '' .
PERFORM FCAT USING 'EDATU' 'ITSO' '' 'SCH.DATE' 'EDATU' 'VBEP' ''.
PERFORM FCAT USING 'SONWT' 'ITSO' '' 'S.O.NWT ' 'P' '' ''.
PERFORM FCAT USING 'SOGWT' 'ITSO' '' 'S.O.GWT ' 'P' '' ''.
PERFORM FCAT USING 'SPART' 'ITSO' '' 'DIV ' 'SPART' 'VBAP' ''.
PERFORM FCAT USING 'BMENG' 'ITSO' '' 'DISP.QTY' 'BMENG' 'VBEP' ''.
PERFORM FCAT USING 'DISPNWT' 'ITSO' '' 'DISP.NT.WT ' 'P' '' ''.
PERFORM FCAT USING 'BALQTY' 'ITSO' '' 'BAL.QTY.' 'P' '' ''.
PERFORM FCAT USING 'BALNWT' 'ITSO' '' 'BAL.NT.WT ' 'P' '' ''.
PERFORM FCAT USING 'BALGWT' 'ITSO' '' 'BAL.GR.WT ' 'P' '' ''.
PERFORM FCAT USING 'STATUS' 'ITSO' '' 'STATUS' 'STATUS' '' ''.
refresh t_event.
*perform set_top_page_heading using t_heading t_event.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK
I_CALLBACK_HTML_TOP_OF_PAGE = 'TOP'
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = F1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITSO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " LAYOUT
*& Form FCAT
FORM FCAT USING P_FIELD P_TABLE P_SUM P_TEXT P_RFIELD P_RTABLE P_DISP.
ADD 1 TO POS.
F2-COL_POS = POS.
F2-FIELDNAME = P_FIELD.
F2-TABNAME = P_TABLE.
F2-SELTEXT_L = P_TEXT.
F2-REF_FIELDNAME = P_RFIELD.
F2-REF_TABNAME = P_RTABLE.
F2-DO_SUM = P_SUM.
F2-NO_OUT = P_DISP.
APPEND F2 TO F1.
CLEAR F2.
ENDFORM. " FCAT
FORM F_BUILD_EVENTCAT .
CLEAR: GT_EVENTS. REFRESH: GT_EVENTS.
CLEAR: FS_EVENTCAT.
FS_EVENTCAT-NAME = 'TOP_OF_PAGE'.
FS_EVENTCAT-FORM = 'F_REPORT_HEADER_ALV'.
APPEND FS_EVENTCAT TO GT_EVENTS.
CLEAR: FS_EVENTCAT.
FS_EVENTCAT-NAME = 'END_OF_LIST'.
FS_EVENTCAT-FORM = 'F_WRITE_SUMMARY'.
APPEND FS_EVENTCAT TO GT_EVENTS.
ENDFORM.
*FORM F_REPORT_HEADER_ALV.
*CALL FUNCTION 'Z_HEAD_PRINT'
EXPORTING
WRITE: / TITLE1 = 'XYZ Limited'
TITLE2 = 'Sales Order Report'
TITLE3 = 'Created on '
COLOR = 'X'.
*ENDFORM.
FORM F_WRITE_SUMMARY .
write:/ 'Welcome to XYZ Limited'.
write:/ 'This is a test program to display Report in ALV Format'.
ENDFORM.
FORM TOP.
DATA: WT_HEADER TYPE SLIS_T_LISTHEADER,
        WA_HEADER TYPE SLIS_LISTHEADER.
CONCATENATE 'DATE:-' SY-DATUM INTO FDATE.
CONCATENATE 'TIME:-' SY-UZEIT INTO FTIME.
FNAME = 'NAME:- TEST'.
WA_HEADER-TYP = HEADER.
WA_HEADER-INFO = FNAME.
APPEND WA_HEADER TO WT_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = HEADER.
WA_HEADER-INFO = FDATE.
APPEND WA_HEADER TO WT_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = HEADER.
WA_HEADER-INFO = FTIME.
APPEND WA_HEADER TO WT_HEADER.
CLEAR WA_HEADER.
ENDFORM.
*& Form set_top_page_heading
text
-->P_T_HEADING text
*form set_top_page_heading using t_heading
t_events type slis_t_event.
*data: x_heading type slis_listheader,
x_event type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = ''(001).
append x_heading to t_heading.
t_heading-info = 'TEST'.
t_heading-typ = 'H'.
Program name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Program: '.
x_heading-info = sy-repid.
append x_heading to t_heading.
User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.
Date of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
write sy-datum to x_heading-info.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
write sy-uzeit to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
*endform. " set_top_page_heading
*please do reward points if helpful
Thanks and Regards,
S.N.Venkatesh

Regarding the report for vendor stock

Hello all,
This is regarding the Subcontracting scenario. We have requirement of transferring the stock of material to Vendor by using 311 Q as the tye child material is in the project stock. In
However the customer would like to have a report in which we can see the stock provided to vendor ' Vendorwise or PO wise" .
Kindly suggest the solution.
Thanks & regards,
Sudhir

Hi
The stock monitoring for SC stocks at vendor can be done uswing ME2O report.
If you want to see the total stocks available at vendor then use report MBLB

Out of stock material report based on sales orders

Hi,
I have a requirement to create a report where I need to show the unfulfilled sales orders due to materials were out of stock for those sales orders.
e.g. there were 3 orders placed yesterday. we partialy delivered order - 1 as one of the material was available but second material was out of stock and order - 2 was not delivered at all due to out of stock materail and order - 3 was delivered completely
Header 1
Header 2
Header 3
sales order
material
quantity
order - 1
mat -1
0
mat - 2
2
order - 2
mat-3
0
order - 3
mat - 4
2
required out put it to show only those sales orders which has 0 quantity materials.
Header 1
Header 2
Header 3
sales order
material
quantity
order - 1
mat -1
0
order - 2
mat-3
0
any advice on data modeling as to how do i achieve this?
Which dataosurces shall i use?
regards,
Biapp

Hi Gajesh,
I have looked in to the material availability date and it gives me the required result about 80%.
only problem is e.g.
if the customer placed order for a material for 10qty and if we had 5 in stock same day and the rest of the 5 qty is available after the month but material availability picks up that 5 qty and it does not show that we were not able to fullfill the order 100%. material availability date does not pick up the second date.
how do i overcome this issue? do you have any idea?
regards,
BIapp

Regarding: material report

Similar Messages

Maybe you are looking for