Regarding ME22n Call Transaction method

Hi,
i am working on BDC Object, in this object i am attaching output type 'XXX' in messages for each purchase order(ME22n).For example if i am taking multiple range of purchase orders.It shows following message whenever i m executing in no screen mode.
' No batch input data for screen SAPMSSY3 0121' and Call transaction return code is 1001.
If i am debugging the same object in All Screen mode its working fine.
SAP Version is 4.6c
I Searched all the relvant threads but i am not able get the Soloution.
Can any one please help me regarding this.
Thanks and Regards,
kishore.

ME22N is an enjoy transaction, officially not compatible with BDC. (Look at OSS [Note 217437 - ME21N/ME51N: Batch input and CATT not possible|https://service.sap.com/sap/support/notes/217437] and [actually search at sdn|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=me22n+bdc&adv=false&sortby=cm_rnd_rankvalue])
Try to use [BAPI_PO_CHANGE|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=bapi_po_change&adv=false&sortby=cm_rnd_rankvalue] (BUS2012) which exists in 46C even if not officially released.
Regards

Similar Messages

Regarding BDC and Call transaction Method

hi gurus,
can anyone tell the difference how many records Call transaction and Session
Method can upload in case of single transaction and what is the time taken by each.its urgent pls.
thanks and regards.

Rajesh,
u can do as many as ,
coming to speed means it depends on server,
if ur using session then u can calculate time ,
with in one time h many records system will upload the records by seeing in sm35
(first see h many records systems uploads, see the number and put the time , after one min again see the records h many it is ,) u can calculate by this.
remember this speed will changes depends on server,
so if u have n number of records better to do upload in weekends.
2) if u r using call transaction method means , normally we use error file where ever record occurs that record is in error file, i think we cant analyze h many records it will be with in a time r .
we can also check by going respective tables , just put the time and do refreshing the table after one minute , n this way u can analyze .
Thanks

Doubt in uploading using call transaction method

hi all
i am uploading f-29 in call transaction method .. i have a problem in currency field, the currency field is not picking up it shows a error that input field is longer than screen field .. i have declared currency field as type BSEG-WRBTR(same as screen field ...how to go about
thanks
lokesh

Hi,
When you use the database value directly in your BDC, you will have this issue. It is always advisable to use character fields when doing BDC. so change it to charecter field and try it..
Regards
Sudheer

Error while updating data using session and call transaction method

Hi all,
    i have to update data using MM01 transaction from flat file to database.i have used both session method and call transaction method to do that.in both the methods data has been transferred from internal tables to screens but while updating the data that is by clicking the ok-code at the end of the transaction iam getting a dialogue box stating
   SAP EXPRESS DOCUMENT "UPDATE WAS TERMINATED" RECEIVED FROM AUTHOR "SAP".
please tell whether the problem lies and solution for that.
                                   thanks and regards.

hi,
check your recording.check whether u saved your material no in recording or not.
once again record the transacton mm01.
       MATNR LIKE RMMG1-MATNR,
       MBRSH LIKE RMMG1-MBRSH,
       MTART LIKE RMMG1-MTART,
       MAKTX LIKE MAKT-MAKTX,
       MEINS LIKE MARA-MEINS,
       MATKL LIKE MARA-MATKL,
       BISMT LIKE MARA-BISMT,
       EXTWG LIKE MARA-EXTWG,
these are the fields which u have to take in internal table.
this is the record which i took in my flatfile.use filetype as asc and hasfieldseperator as 'X'.
SUDHU-6     R     ROH     MATSUDHU     "     001     7890     AA
i did the same.but i didn't get any error.

How to handle the pop-ups in va02 transaction in Call Transaction Method

Hi Experts ,
I am trying to do bdc by call transaction method for va02 transaction but i am getting popups .
How can i handle the popups and for different sales orders i am getting different popups.
is there any way to handle the pop ups dynamically.
Thanks ain advance.

hi,
when you are using BDC then you will have to handle all the popups. this is minus point in using bdc as you need to feed each and every single bit of information so that bdc works fine and if anything misses then your bdc program will get stuck in middle of processing.
best thing is check for function module or BAPIs available for those transactions. For VA02 there is a BAPI available ''BAPI_SALESORDER_CHANGE''. Try using this BAPI and if this BAPI doesnt handle the change you want to make in sales order then only go for BDC.
you can also check BAPIs available in 'BAPI' tcode.
hope this is helpful.
Regards,
Saba

Error in BDC CALL TRANSACTION METHOD..

hai i got an error in doing BDC CALL TRANSACTION METHOD
Error:diffrent number of parameters in FORM and PERFORM(routine :FILL_SCREEN_DETAILS:,number of formal parameters :3,number of actual parameters:1)
PROGRAM
REPORT ZDEMO_UPLOAD_COST_CENTER_DATA.
DATA:BEGIN OF WA_DATA,
KOKRS TYPE KOKRS,"CONTROLLING AREA
KOSTL TYPE KOSTL,"COST CENTER
DATAB TYPE DATAB,"START DATE
DATBI TYPE DATBI,"END DATE
KTEXT TYPE KTEXT,"NAME
LTEXT TYPE LTEXT,"DESCRIPTION
VERAK TYPE VERAK,"PERSON RESPONSIBLE
KOSAR TYPE KOSAR, "COST CENTER CATEGORY
KHINR TYPE KHINR,"HIERARCHY AREA
BUKRS TYPE BUKRS,"COMPANY CODE
GSBER TYPE GSBER,"BUISINESS AREA
END OF WA_DATA.
*TYPES:IT_DATA TYPE STANDARD TABLE OF TY_DATA.
DATA:IT_DATA LIKE TABLE OF WA_DATA,
      IT_BDCDATA LIKE TABLE OF BDCDATA,
      WA_BDCDATA LIKE LINE OF IT_BDCDATA,
      IT_BDCMSGCOLL LIKE TABLE OF BDCMSGCOLL,
      WA_BDCMSGCOLL LIKE LINE OF IT_BDCMSGCOLL.
DATA :V_FILE TYPE STRING.
CONSTANTS :C_KS01(4) TYPE C VALUE 'KS01',
            C_X(1) TYPE C VALUE 'X',
            C_A(1) TYPE C VALUE 'A'.
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETER :PA_FILE LIKE FC03TAB-PL00_FILE OBLIGATORY.
SELECTION-SCREEN:END OF BLOCK B1.
*AT SELECTION SCREEN ON VALUE REQUEST
* EVENT TO BE TRIGGERED WHEN WE PRESS F4.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PA_FILE.
PERFORM GET_F4_FOR_FILE USING PA_FILE.
*         START-OF-SELECTION
START-OF-SELECTION.
*WE NEED TO MOVE THE PA_FILE INTO ANOTHER VARIABLE OF TYPE STRING
*AS WE ARE GOING TO USE THE SAME IN THE FM:GUI_UPLOAD THERE THE FILE TYPE IS STRING
V_FILE = PA_FILE.
PERFORM UPLOAD_FILE_T0_ITAB USING V_FILE CHANGING IT_DATA.
*FILL THE SCREEN AND FIELD DETAILS
LOOP AT IT_DATA INTO WA_DATA.
REFRESH IT_BDCDATA.
*FIRST SCREEN DETAILS
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1''0200''X'.
*CURSOR DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_CURSOR''CSKSZ-KOKRS'.
*OK CODE DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_OKCODE''/00'.
*CONTROLLING AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KOKRS' WA_DATA-KOKRS.
*COST CENTER DETAILS
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KOSTL' WA_DATA-KOSTL.
* START DATE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-DATAB_ANFO' WA_DATA-DATAB.
*END DATE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-DATBI_ANFO' WA_DATA-DATBI.
*NEXT SCREEN DETAILS
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1''0299''X'.
*OKCODE DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_OKCODE''=BU'.
*SUBSCRN FIELD DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_SUBSCR''BDC-SUBSCR'.
*CURSOR DETAILS
PERFORM FILL_FIELD_DETAILS USING 'BDC_CURSOR''CSKSZ-WAERS'.
*NAME
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KTEXT' WA_DATA-KTEXT.
*DESCRIPTION
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-LTEXT' WA_DATA-LTEXT.
*PERSON RESPONSIBLE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-VERAK' WA_DATA-VERAK.
*COST CENTER CATEGORY
PERFORM FILL_FIELD_DETAILS USING'CSKSZ-KOSAR' WA_DATA-KOSAR.
*HIERARCHY AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-KHINR' WA_DATA-KHINR.
*COMPANY CODE
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-BUKRS' WA_DATA-BUKRS.
*BUISINESS AREA
PERFORM FILL_FIELD_DETAILS USING 'CSKSZ-GSBER' WA_DATA-GSBER.
*CALL THE TRANSACTION
CALL TRANSACTION C_KS01 USING IT_BDCDATA
                          MODE C_A "ALL SCREENS
                                   "N-NO SCREENS
                                   "E-ERROR SCREENS ONLY
                          UPDATE 'A' "ASYNCHRONOUS
                                      "SYNCHRONOUS
                          MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
* FORM FILL SCREEN_DETAILS
FORM FILL_SCREEN_DETAILS USING PROGRAM LIKE BDCDATA-PROGRAM
                       DYNPRO LIKE BDCDATA-DYNPRO
                       DYNBEGIN LIKE BDCDATA-DYNBEGIN.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = DYNBEGIN.
APPEND WA_BDCDATA TO IT_BDCDATA.
ENDOFRM.
* FORM FILL_FIELD_DETAILS
FORM FILL_FIELD_DETAILS USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
ENDFORM.
* FORM GETE_F4_FOR_FILE
*DISPLAY ALL THE FILES IN THE SYSTEM FOR SELECTION
*P_PA_FILE NAME OF THE FILE
FORM GET_F4_FOR_FILE USING P_PA_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
* EXPORTING
*    PROGRAM_NAME        = SYST-REPID
*    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = 'PA_FILE'
*    STATIC              = ' '
*    MASK                = ' '
   CHANGING
     FILE_NAME           = PA_FILE.
* EXCEPTIONS
*    MASK_TOO_LONG       = 1
*    OTHERS              = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
* FORM UPLOAD_FILE_TO_ITAB
* FP_V_FILE = FILE NAME
*FP_IT_DATA = INTERNAL TABLE TO STORE THE DATA
FORM UPLOAD_FILE_TO_ITAB USING FP_V_FILE CHANGING FP_IT_DATA LIKE IT_DATA.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = FP_V_FILE
HAS_FIELD_SEPARATOR           = ' X'
TABLES
    DATA_TAB                      =FP_IT_DATA.
ENDFORM.
Edited by: saifudheenc on Aug 7, 2010 5:09 PM

hi
try to add spaces between parameters :
example:
PERFORM FILL_SCREEN_DETAILS USING 'SAPLKMA1' '0200' 'X'.
regards,darek

Program for call transaction method

can any body help me , how to write a call transaction method . how to create error logs for call transaction method

hi
REPORT ZCALL.
TYPES : BEGIN OF itab,
lifnr TYPE rf02k-lifnr,
ktokk TYPE rf02k-ktokk,
END OF itab.
DATA : i_tab TYPE TABLE OF itab INITIAL SIZE 0,
wa_tab TYPE itab.
DATA : i_bdc TYPE TABLE OF bdcdata INITIAL SIZE 0,
wa_bdc TYPE bdcdata.
DATA : i_message LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
wa_message TYPE bdcmsgcoll.
DATA : fname TYPE string VALUE 'd:\manish.txt'.
DATA: p_text(100) TYPE c.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = fname
filetype = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = i_tab.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT i_tab INTO wa_tab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'RF02K-LIFNR' wa_tab-lifnr.
PERFORM bdc_field USING 'RF02K-KTOKK' wa_tab-ktokk.
PERFORM bdc_field USING 'BDC_OKCODE' '= AUSW'.
CALL TRANSACTION 'XK01' USING i_bdc MODE 'N'. " UPDATE 'S' MESSAGES
"INTO i_message.
REFRESH i_bdc.
ENDLOOP.
IF sy-subrc NE 0.
READ TABLE i_message WITH KEY msgtyp = 'E'.
IF sy-subrc = 0.
LOOP AT i_message INTO wa_message.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = i_message-msgid
lang = 'EN'
no = i_message-msgnr
v1 = i_message-msgv1
v2 = i_message-msgv2
v3 = i_message-msgv3
v4 = i_message-msgv4
IMPORTING
msg = p_text
EXCEPTIONS
not_found = 1
OTHERS = 2.
WRITE:/ p_text.
ENDLOOP.
ENDIF.
ENDIF.
*& Form bdc_dynpro
text
-->PROGRAM text
-->DYNPRO text
FORM bdc_dynpro USING program dynpro.
CLEAR wa_bdc.
wa_bdc-program = program.
wa_bdc-dynpro = dynpro.
wa_bdc-dynbegin = 'X'.
APPEND wa_bdc TO i_bdc.
ENDFORM. "bdc_dynpro
*& Form bdc_field
text
-->FNAM text
-->FVAL text
reward if u find useful
regards
Nagesh.Paruchuri

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
          bukrs TYPE bukrs,
          werks TYPE werks_d,
          matkl TYPE matkl,
        END OF t_tab.
DATA: w_tab TYPE t_tab,
            i_tab      TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Handling Warning pop up windows in BDC call transaction method

Hi All,
Iam using a BDC to automate the Costing Process i.e. Transaction CK40N using call transaction method. In a particular Screen after i perform the execute action, a warning pop up window appears. Only if I click on OK, the execution continues or else it will not proceed. How to handle this situation in case a warning pop up window appears based on the input which is given? In other words a Dynamic warning message. Thanks in advance....
Regards,
Nirmal

Hello,
U can either use NO_DIALOG or SUPPRESS DIALOG to avaid this,.
Regards,
Vasanth

In bdc call transaction method which one ll prefer synchronous or asynchron

hi could anybody tel me
call transaction method which one is preferred synchronous or asynchronous..?
what ll happen if we do other method..?
foreground or background which one ll prefer..?
what ll happen if we do otehr method..?
on which condition we have to use synchronous and asynchronous
on which condition we have to use foreground and background
thanx
kals.

Hi,
if you haven't done yet please visit for general information:
http://help.sap.com/saphelp_nw70/helpdata/en/d2/f8f3393bef4604e10000000a11402f/frameset.htm
for further information:
http://help.sap.com/saphelp_nw70/helpdata/en/69/c2501a4ba111d189750000e8322d00/frameset.htm
This will hopefully answer your question.
Regards
Bernd

How to send error record to session in call transaction method

Hi experts,
I want to send only the error record to session while executing the program in call transaction method. please give me example on this
regards,
siva kumar

One logiv that I can suggest is that after you have got the details of the record in error, you write another perform build_Session and put the below logic in that.
Logic:
1. Build a internal table for the error records similar to the internal table you used for looping for the call transaction. In short this internal table will have only the records that have an error in call transaction.
2. Copy the recordign that you have done before and put it in the perform inside the loop and build the BDC table.
3. Then .using this BDC table you can build the BDC session.
- Guru
Reward points for helpful answers
3.

Mappimg and updation in bdc 'session ' and 'call transaction' methods

What will happen if error record comes while updating in session method and call transaction method.

Hi,
If any error comes in Session method U can find that error in SM35->Log
and updste again database for those enteries
In cll transaction Method U have to handel error manually . for this u have to use structure BDCMSGCOL and Table T100.
Regards
Gaurav

How many reocrds update in call transaction method and session method

The flat file having the 10 records but the flat file having the 5 th record is error so in session method how many records will update and in call transaction how many records will update.
can you provide with detailed information like in synchrnous mode and asynchronous mode
Regards
reddy

hi,
session method :up to 4 records will be updated as it is in synchronus mode.
Call transaction method : except 5 th all 9 records will be updated as it is assyncronous method.
Regards
sandeep Reddy

No batch input data for screen occured in Call Transaction method for PA40

Hi,
I creatred an interface to update an employee action data ( Change of position ) PA40 by using Call transaction method.
while executing the interface, I got the below error.
No batch input data for screen MP049100 200
this interface updated the first employee from file, then after it is giving the below error frequently.
No batch input data for screen MP049100 200
regards,
Ashok Reddy Revoori

The infogroup of action Change Position may be having infotype 0491. The infotypes screen sequence is decided based on employee's country grouping and user group. For the employee where you are receiving error, infotype 0491 screen is appearing for which you do not have BDC data.

How to create a session using call transaction method.

hi , this is nagaraju,
How to create a session using call transaction method.

Hi,
About Data Transfer In R/3 System
When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.
In the process of replacing current applications and transferring application data, two situations might occur:
     The first is when application data to be replaced is transferred at once, and only once.
     The second situation is to transfer data periodically from external systems to SAP and vice versa.
     There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.
The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called batch input or batch data communication.
1. SESSION METHOD
2. CALL TRANSACTION
3. DIRECT INPUT
First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. Unless session is processed, the data is not transferred to database table.
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program.
SESSION METHOD
Data is not updated in database table unless Session is processed.
No sy-subrc is returned.
Error log is created for error records.
Updation in database table is always synchronous
CALL TRANSACTION
Immediate updation in database table.
Sy-subrc is returned.
Errors need to be handled explicitly
Updation in database table can be synchronous Or Asynchronous.
Regards,
Sruthi.

Regarding ME22n Call Transaction method

Similar Messages

Maybe you are looking for