Regarding Message Monitoring
Hi All ,
Whats the differance between Message Monitoring using SXMB_MONI and Message Monitoring in RWB .
Whats the use of Transaction Code SXI_MONITOR .
Thnaks ,
hem.
Hi Hem,
As per the answers u have got from the above i want to add few points...
RWB---> it is the place where you can monitor the complete message flow. From the time it is picked to the time it is posted. Added to it u have the provision of Channel Monitoring,performance monitoring where you can check the performance(time to execute),End to End Monitoring etc... This really helps in debugging the problems.
where as is in Sxmb_moni you can just see the messages generated in the integration server. messages generated in the adapter engine cannot be viewed in SXMB_MONI or SXI_MONITOR.
you can view the same dynpro as in SXMB_MONI in the RWB.
Regards
Gopi
Similar Messages
-
How to delete the messages in message monitoring
hi all,
can anyone tell me is there any way to delete the messages in message monitoring.Hi,
Please Refer these Blogs
/people/prasad.illapani/blog/2007/03/08/performance-tuning-checks-in-sap-exchange-infrastructure
/people/prasad.illapani/blog/2007/04/20/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-ii
/people/prasad.illapani/blog/2007/04/27/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-iii
<b>Reward Points if Helpful</b>
Regards
sasi -
How to delete the error message in the Web page Message Monitoring
Hi All:
I'd like to ask a question.If there is error message in the T-code sxmb_moni->Monitor for Processed XML Messages,I can cancel the error message manually and archive the message. After that,I can delete the message from "Monitor for Processed XML Messages".
But after those operation,I find in the web page " Message Monitoring", there are still messages in the "Messages from Component Integration Server and/or Adapter Engine".
How can I delete those message both successful and error.
Thanks All
ElliottHi Elliot,
SXMB_ADM
Integration Engine Configuration
Specific Configuration
Category: DELETION
Parameters: PERSIST_DURATION, PERSIST_DURATION_ERROR
Subparameters: SYNC, ASYNC
Change "Current Value".
and execute your delete job again!
Regards,
Udo -
System Error in Message Monitoring while it shows checked flag in SXMB_MONI
Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
RegardsSystem is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05 Information Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05 Information SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05 Information SOAP: completed the processing
2010-05-10 13:15:05 Information SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06 Error The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution. -
Messages on Holding at Message Monitoring under Runtime Workbench
Hello Colleagues,
we have currently the problem that a lot of messages for some interfaces are in status Holding under Message Monitoring at Runtime Workbench for PI 7.1.
I'm not able to resend the messages with status Holding as well as change status to cancel.
Quality of Service for the Interfaces are Exactly Once in Order.
I assume an error message blocks the queue and due to the fact we have Exactly Once in Order configured all following messages be in status Holding.
Is my assumption right?
But, I am not abel to find any messages in status error with blocks the queue!
How can I solve that issue?
Many thanks in advance!
JochenI assume an error message blocks the queue and due to the fact we have Exactly Once in Order
configured all following messages be in status Holding.
AE should have least number of EOIO messages at a given instance...otherwise Holding is what you get.....and holding is common with EOIO....so see if you can chagne the QoS of some messages to EO
But, I am not abel to find any messages in status error with blocks the queue!
Never you will get an error in SXMB_MONI....or the queue blocked....
When your message goes out of IE...the corresposding message entry is marked with chequered flag...observe in MONI you will see this....however in AE the message can fail if not able to send to the target system....
For some more understanding refer my answer in this thread:
Re: Restarting Error's in SXMB_MONI
Regards,
Abhishek. -
Error in Seeburger Message Monitoring
Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha -
Message got struck in hold status in message monitoring.
Hi SDNers,
I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
After repetetive attempts of restarting the message, still it is in hold status.
Even if I tried to cancel the message, it is not cancelling as it is in hold status.
Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.GHi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case. -
Message status "Holding" - Message monitoring adapter framework
Hello,
We have some messages with the status "Holding" in a queue in the message monitoring in the adapter framework.
Normally you have to restart the first message of that queue. The message with the status "system error". Unfortunately this message is not available anymore because it is older than 30 days and the retetion period is 30 days.
I already read the blog about "[How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1887311350DB01819286872323159351End?blog=/pub/wlg/3566]"
The blog does not mention what to do when the first message (sequential number) is not available anymore.
Is it possible to restart the messages in the queue in that case?
Thanks
Kind regards
FrankUnfortunately this message is not available anymore because it is older than 30 days and the retetion period is 30 days.
I assume that the message was deleted.....in this case the next message in the queue will be blocking the queue....so try resending this message....even the blog mentions that you either solve the error or cancel the message....so now start from the second message....if possible solve the error for this message....if not possible to resolve then cancel it so that rest of the queue gets processed
From the blog:
Now the erroneous message is the first message in the display. You can look at the error reason, try to fix the problem and
resend or cancel the message to release the queue.
Regards,
Abhishek. -
System Error in Message Monitoring -Proxy to SOAP async scenario
Hi All,
My scenario is ABAP Proxy---> SAP PI 7.1 ---> WEbService(Asynchronous SOAP ).
In Moni message is showing successful Flag, but message has got stuck in "system Error" at message monitoring.I can't see any Audit log in Message monitoring .
but in related Soap Receiver communication channel i can see the below Error
"2010-08-11 09:54:15 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Information SOAP: sending a delivery error ack ...
2010-08-11 09:54:15 Information SOAP: sent a delivery error ack
2010-08-11 09:54:15 Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005.
2010-08-11 09:54:15 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Retrieving the COM class factory for component with CLSID {00226D6E-6A57-44DB-9DDC-66FDCB2869B3} failed due to the following error: 80070005. "
Please help , what could be the problem.
Thanks in Advance.
JyotiHi Jyoti,
>Is there any specific setup required at Provide side while moving to Acceptance system
I dont think so.
Please compare EXACTLY the settings of the two Comunication Channels, especially the server path. Please assure that you ve sent exactly the same message content from Acceptance system.
Regards,
Udo -
Error in message monitoring while creating new record in R/3
Hi All,
I am getting the following error in message monitoring while creating a new record from SAP Mobile client.
Service name: Validation_Service
Message: BackendKeys are not filled in table HEADER returned by getDetails
I am passing some random number from Client to SAP R/3 create function module.
When i pass the same value in create FM as in message monitoring. I am able to create the record successfully,
Corresponding to newly created record, i can see the data in getdetail header also.
Not sure why this error is coming.
Appreciate your help!!
Thanks & Regards
DevendraThe CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE. -
Wrong port in FTP receiver adapter - no errors in message monitoring?
Hello all
We're on XI 3.0 SP16 and have created / configured a HTTP XML -> XI -> FTP Server scenario. In the receiver comm. channel (ftp) we had specified a wrong port number and always wondered, why we never got errors in message monitoring. Everything seemed to be processed correctly... but no file arrived on the FTP server (receiver) side!
After correcting the wrong FTP port number in the receiver FTP comm. channel everything went fine.
We now encountered a similar problem with a RFC receiver adapter. We're using it in another scenario HTTP XML -> XI -> RFC to SAP R/3 (4.7).
For some reason it died (red status in adapter monitor) and it was no more possible to do RFC calls from XI to SAP R/3 (normal RFC adapter, NO proxies).
In XI message monitor everything seemed to be ok but no message arrived till SAP R/3. Nothing in any queue...
After deactivating and reactivation the RFC receiver comm. channel it worked again BUT ALL PREVIOUSLY SENT messages seem to be lost.
Is it really the way it works? Does XI integration engine at runtime NOT catch whether or not a RFC or FTP receiver adapter died, thus is not able to tell somewhere in message monitor that a message could not be delivered at all?
I'm really confused here but hopefully I simply don't understand some easy principles to take into account...
Our SAP R/3 is on rel. 4.70 with Web AS 6.20. The XI 3.0 plugin is not installed. Do we need to go with server proxies there and use QOS = best effort?!?
Thanks for some suggestions.
Best regards,
RenaudHi Michal
Thanks... works great for normal XML based messages!
Now, what if I wanted to pass binary files from one ftp server via BPM to another ftp server in order to enable the transport acknowledgment?
The files polled from ftp server using the ftp sender adapter are all in binary format (ARJ). No xml data in there. How should the message format look like in BPM for the receiving step? Or: how to make sure not to loose the binary content when passing through BPMs?
I need this sort of scenario because of the tansport acknowledgment and because I need to have some sort of message splitting (send the binary file over to a second ftp server and additionally send some kind of info message to SAP R/3 regarding thin binary file).
BTW: in the MessagingSystem/monitor/monitor.jsp I do not see sender / receiver information. Is this normal? It's quite of a bad thing to look inside each message in order to find out what message I'm having in front of me...
Thanks a lot for your support and patience!
Kind regards,
Renaud -
SOAP error in audit log of message monitor
Hi,
I am using RPC wsdl file for idoc-xi-soap services. When I am doing the testing for the scenario in the message monitor I am getting the following audit log:
2008-02-29 15:21:48 Success Message successfully received by messaging system. Profile: XI URL: http://EMHBSSAP05.bekaertcorp.local:56600/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2008-02-29 15:21:48 Success Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2008-02-29 15:21:48 Success The message status set to DLNG.
2008-02-29 15:21:48 Success Delivering to channel: ZCC_Material_SOAP
2008-02-29 15:21:48 Success MP: Entering module processor
2008-02-29 15:21:48 Success MP: Processing local module localejbs/sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean
2008-02-29 15:21:48 Success Message successfully put into the queue.
2008-02-29 15:21:48 Success The message was successfully retrieved from the receive queue.
2008-02-29 15:21:48 Success SOAP: request message entering the adapter with user J2EE_GUEST
2008-02-29 15:21:48 Success SOAP: completed the processing
2008-02-29 15:21:48 Success SOAP: continuing to response message a9ea9a30-e6d1-11dc-c8bd-001a4b0658c1
2008-02-29 15:21:48 Error SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success SOAP: sending a delivery error ack ...
2008-02-29 15:21:48 Success SOAP: sent a delivery error ack
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: SystemErrorAck
2008-02-29 15:21:48 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Success Acknowledgement creation triggered for type: AckNotSupported
2008-02-29 15:21:48 Error Exception caught by adapter framework: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
2008-02-29 15:21:48 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:.
2008-02-29 15:21:48 Success The message status set to WAIT.
Can anybody suggest what is the meaning and root cause for the error:
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault:
Thanks & Regards
Prabhatgo to sxi_monitor and get the inbound message, later go to IR an do a TEST mapping.
any error occur?if yes, paste it here
generally soap fault o soap exception relate to an error from WS side,but before say nothing check you have all data and transformation OK.
hope it helps -
In Message Monitoring Message showing Error:Message
Hi
Can anyone solve this problem.Its urgent for me.
My scenario is IDoc->XI->FILE
The file i am trying to generate is an xml file which i am dropping in XI application server using File system.
The problem is when i am going to see the message using transaction SXMB_MONI the perticular message interface is showing waiting for acknowladgement status .
But in message monitoring in runtime workbench the it is showing following status:
Adapter Engine
<b>Holding</b>
18.11.2005 05:42:09
CORP_SAP_DR2_030 http://limited.com/usa/sap_appl/retail/VendorsSAPAPOToMANU
MIIA_Create
BS_MANU
I am in SP14.
Also the output xml file is not getting created in the XI application server.
Please let me know the solution.
Thanks
Debraj Royhi debraj..
is ur mesage ie sxmb_moni in red staus or scheduled status...??
if in scheduled cud be errors with queues ...delete ur queues with tcodes : smq1 and smq2...
and also hopefully u must have configured ur idoc correctly..
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
regards..
vishal -
File Adapter picks up the file but cant see it in MONI/Message Monitoring
Hi
I am using FCC in Sender File Adapter and have only one sub structure under Recordset hence I have not used the 'Key Field Name' though ''Key Field Type' by default is 'String(Case-Sensitive)'. Besides the 'fieldNames' heading I have mentioned all the fields of the sub structure in the same order as I have mentioned in the Data Type.
The problem that I am facing is that even though the file is picked up from ftp successfully still I cant see any traces of it in either MONI or Message Monitoring though
The error that I receive in the MDT is -
Success : Entire file content converted to XML format
Warning : Empty document found. Proceed without sending message
Success : File "Test.csv" deleted after processing
and I have data in the file.
Can u suggest a solution?
Warm regards,
Vaibhav> Hey
> >>So I have filled my test excel file with the values
> A and B in adjacent columns
> are you picking up some .xls file?if yes,then Content
> conversion wont work,You have to create adapter
> module processor and you have to add to your module
> processor bean to the adapter...Just check the
> following procedure...
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 1967
> Thanx
> Aamir suhail
Hi Aamir
I had a look at the blog and according to that I will need to create a module...the prob with that is in the blog he hasnt provided the full steps for that. Also I had tried this thing earlier of using an excel file and saving it in .csv format and it had worked. I cant figure out what the error is this time
Have u worked on creating amodule for excel files b4?
Vaibhav -
XI Message Monitoring - Mapping custom fields for search in monitor?
Is it possible to map a reference field so that searching for a specific message is more user friendly?
For example, we produce hundreds of outbound SHPMNT04 messages each day. Would it be possible to map a field such as E1EDT20.TKNUM (Shipment Number) to a field in the monitor (SXMB_MONI) such as "Outbound Reference" so we can easily search on this field?
Currently we use a combination of WE09 and IDX5 to find a specific message. Obviously, this is cumbersome and time-consuming.
Thanks in advance.Hi,
of course it is possible in many ways
there are at least two ways
the first one is to use Trex search for xi + standard
the second one is described in this weblog + but remember that
without indexing this will take long to search like this
/people/alessandro.guarneri/blog/2006/02/14/super-message-monitor-for-sap-xi
Regards,
michal
Maybe you are looking for
-
Drill down Error in Report Generation
Hi, I've a problem with a Report generation. The ERROR Message is the following one: Odbc driver returned an error (SQLExecDirectW). Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10
-
Hello I have installed 2 nodes with Redhat AS3, FireWire and OCFS. Before install Oracle Software (RAC Software) I'm doing some tests. First, I can create an ocfs partition that is visible and usable from 2 nodes. But when I reboot one of them, and t
-
Hi, The proxy service is getting called twice for invalid input.Its working fine for valid input.The logic i used is,checking the input file and calling an raise error action in case of validation fails.I gave retry count to 0.Is it possible to stop
-
Photoshop Elements 3 (Mac Installation Fail)
I recently bought a brand new 27" imac and of course i tried to install the photoshop i had on my old pc, on my new imac. I inserted the disk and followed all the steps, the installation seemed to work and it even came up with a message box saying th
-
Computer crash after waking from sleep
Anytime my computer wakes from sleep mode, it crashes and restarts by itself. Any solutions? I am running OSX Mavericks 10.9.1 on a brand spankin new 27" iMac 3.4 GHz Intel Core i7. Never had this problem before upgrading to Mavericks.