Regarding Message Type in ALE

hi guys,
i was involved in Master data distribution using Message Types MATMAS, DEBMAS and CREMAS but never created a customer specific Message Type that is why, i just want to know in what cases do we have to create our own message type's using we31, we30 and we81 and we82.
can any one out here help me out by sharing giving some real time scenario's in what cases do we exactly have to create our own message type.
thanks
Pavan

Hi Pavan,
There is no hard and fast rule that you use standard or custom message types...
SAP has provided messages for almost all scenarios. If you don't have enough fields in standard messgae type, you can enhance it to accumulate your requirement.
But if the organization has completetly custom defined system (involving many Z-tables) , we create custom message types...
As far as my knowledge, we should try to go ahead with standard message types by suppressing unnecessary segments and enhancing existing segments just to avoid Z-objects.
Regards,
Audy

Similar Messages

Tcode to send custom data using custom message type in ALE

I have ceated custom message type and i want to send data to say system B.I wanted to know Tcode to send custom data using custom message type in ALE.
for example:
material data...message type = matmas....tcode = BD10.
like this.
i hope you have got my question.
plz guide me?
regards
mallikarjun mangalore

Hi,
Sending data through ALE is not a single-step process. Take a look at http://www.sapgenie.com/ale/. The paper at http://www.sapgenie.com/sapgenie/docs/ale_whitepaper.doc is a wonderful resource for the ALE process.
Regards

Inbound IDOC error :51 Passed with out Message Type to ALE Layer

Hi,
I am struct wtih the inbound IDOC scenario ..XI able to send IDOC but at ECC side it is in 51 red status and the error message is
"IDOC passed without Message type to ALE Layer"
Do I need to pass these segment values in Message Mapping? I didnt mapped any MESTYP,SNDPOR,SNDPRT and so on.. disabled these fields...
Could any one light on this issue?
Thanks
Rajeev

>
rajeev raj wrote:
> Hi,
>
> I am passing values in MM as below:
>
> <?xml version="1.0" encoding="UTF-8"?>
> <ZPORDCR01>
> <IDOC BEGIN="Constant">
> <EDI_DC40 SEMENT="Constant">
> <TABNAM>Constant</TABNAM>
> <DIRECT>Constant</DIRECT>
> <IDOCTYP>ZOrders</IDOCTYP>
> <CIMTYP>Constant</CIMTYP>
> <MESTYP>Z_Orders</MESTYP>
> <SNDPOR>B0009</SNDPOR>
> <SNDPRT>LS</SNDPRT>
> <SNDPFC>LS</SNDPFC>
> <SNDPRN>PD_100</SNDPRN>
> <RCVPOR>DEV</RCVPOR>
> <RCVPRT>LS</RCVPRT>
> <RCVPRN>Dev10</RCVPRN>
> <REFINT>GB</REFINT>
> <REFGRP>MTI</REFGRP>
> <REFMES></REFMES>
> <ARCKEY>20090909</ARCKEY>
> </EDI_DC40>
> <E1PORDCR SEGMENT="Constant">
>
> I am forwarding these values in MM... IDOC is successfully reaching in ECC but with 51 error in red... Logical system, post and message types are avaliable in Control record of the IDOC which received wiht errors in ECC.
>
> Thnaks
> Rajeev
Fill the TABNAME as EDI_DC40 and Direct as 2 (represents the inbound direction) and resend the idoc and check
Rajesh

Message type to ALE T880

Hi All,
I have a requirement to ALE the table T880 changes (Global Company Data (for KONS Ledger). Can anybody help me identify if there is any standard message type to handle this requirement. I tried creating a custom view and sending idocs. The data is not getting populated correctly in target systems. The fields are getting shifted by one segment when populating in the target systems eg- Name 1 is being populated to Name 2 field and the same for all the following fields.
Any help is much appreciated.
Regards,
Chandra Kumar
Edited by: Chandra Meda on Sep 3, 2009 11:00 AM

>
Chandra Meda wrote:
> ...I tried creating a custom view and sending idocs...
I don't understand what you exactly did (what message type did you use?), but I feel that you tried to update kind of directly (even though you used idoc technology) the table in the target system, you should neither do that, nor try (instead, use BDC, etc., and all other technologies you probably know, amongst them is also idoc of course if there is a standard one ).

Need of message type in ALE-IDOC

Hi,
Please tell me need of message type in ALE_IDOC and its functioning.Also why it is required.Let me know its exact role.
Thanks.

Hi,
Message types (required for sending the data across participating systems)relate to the structure of the data called an IDOC (Intermediate Document).Message types provide the format of the data, which can be exchanged betweenSAP and non-SAP systems. ALE supports over 200 message types in R/3.
Also check the below links
http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
http://www.sap-img.com/basis/types-of-idocs-use-in-ale-configuration.htm
Thank U,
Jay....

Urgent information required regarding message type and process code

Hi All
We am working on EDI895 transaction (Delivery/Return acknowledgment) and we are using TXTRAW01 Idoc type for the mapping. Can anyone please let me know what the message type and the process code for the IDoc type is???
thanks

Hi,
Welcome to SDN.
Please go to transaction WE64 to find out all process codes available for IDoc type TXTRAW01 with message type TXTRAW.
There are four process codes for message type TXTRAW.
- ED00
- ED00_XML
- ED08
- TXT1
Regards,
Ferry Lianto

Message types for ALE distribution

Hi,
I am working on SRM 7.0. I need to copy the org structure from one client to another. For that I am using the ALE distribution model. Can anyone please let me know all the message types reqired for transferring the org structure.
Thanks,
Bhakti

Hi Masa,
Thanks alot for your help. The document is quite helpful if the org structure had to be mapped from HR. But, the org structure is to be mapped from another existing ERP. Kindly suggest if there is any document for such a transfer.
Also, I have found another way to transport the org structure. Hopefully that should work. Once I am done testing for the same, I will notify.
Thanks,
Bhakti

Message Type problem - ALE

Hello All,
I have a ALE requirement to transfer material.
This I am doing in development client i.e. same server in different clients.
After this is successful I have to do it with different servers.
In SALE all the settings are complete. Remote login is also complete.
Even partner rofile is also generated.
But when I say Distribute model view it is giving me following error :
Model view MV01 has not been updated
Rreason: Distribution model is currently being processed
Kindly suggest why this error is comming.
Dilip

Hello,
 The senario is like this in same server one client is having all data & other client is just a client copy without data only config setting.
 I have created new model view & tried but getting same error.
When I say generate IT IS SAYING

System LOG210 as a partner type already exists
System LOG505 as a partner type already exists
Port A000000018 with RFC destination LOG210 already exists
Outbound parameters for message type MATMAS MATMAS05 already exist
Outbound parameters for message type SYNCH SYNCHRON already exist

Dilip

Regarding message type SEQJIT

Hi all
please tell me the equilant ANSI x12 txn number for message type SEQJIT .
Thanks

Hi Pavan,
There is no hard and fast rule that you use standard or custom message types...
SAP has provided messages for almost all scenarios. If you don't have enough fields in standard messgae type, you can enhance it to accumulate your requirement.
But if the organization has completetly custom defined system (involving many Z-tables) , we create custom message types...
As far as my knowledge, we should try to go ahead with standard message types by suppressing unnecessary segments and enhancing existing segments just to avoid Z-objects.
Regards,
Audy

Regarding Message Type Structures

Dear XIers,
Is it mandatory to have exact message structures for both outbound and inbound message types in Interface Mapping (only JAVA/XSLT mapping).
Thanks,
jangili

Hi,
Is it mandatory to have exact message structures for both outbound and inbound message types in Interface Mapping (only JAVA/XSLT mapping).
No.
Firslty during the mapping of message types we specify how the data is to be transformed from the source structure to the target structure.This takes care of the structure of message types.
While in interface mapping we just speicfy which mapping program is to be used by the interfaces.
Cheers,
*RAJ*

Can we assign same basic type to different message type in ALE

Hi Expert
can we assign same idoc type to different message type?

Hi,
Yes you can assign the one idoc type to multiple message type. Message type nothing but it represents the kind of data we transfer.But idoc type is the format in which we transfer data. As an example in Messager types "ORDERS" and "ORDRSP" both indicates the order related data, and in both case idoc type can be ORDERS01, ORDERS02.............
Thanks,
Asit Purbey.
Edited by: Asit Purbey on Oct 12, 2009 3:07 PM

Regarding Message type W

Hi all,
Iam using a warning message like " message w000()" , now message of this type has two controls "enter" to continue further processing and "esc" which exits from the current processing.
Now how do we catch these events( "Enter" or "Esc").
In a more crisp way , is there a method by which i can use warning message like a IF statement.
Thanks in Advance
Kishore Kumar Yerra

Hi ,
I think Andreas is right . Its better to use FM POPUP_TO_DECIDE_WITH_MESSAGE . To know more about the FM click <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/2a/f9ffe3493111d182b70000e829fbfe/frameset.htm">Here</a>
Regards ,
Shounak M

To know the programme for message type

Hi experts,
This is Venkat, I want to know how to know the programme for master type message types in ALE/ IDOC like for customer master -
SAPLVV01
Thanks in advance
Regds
Venkat

Any body have any solution ?
Message was edited by:
agrud agrud

Problem in Output Message types in PO

Hi Experts,
I created a PO of type (ZRTS) and i assigend message type as ALE its working fine and idoc genereted.
but when i am usign some other PO type its not working .
Here the Partner is same (VN-Vendor)
Pls help me ..

If you have created conditin record for all the document type in MN04 then it should work becuase doc type has nothing to do for printing config.
this is basically a condition record.
check your condition record

When to add message type to distribution model

hi
i am bit confused on when to add a custom/std message type to distribution model. what are the conditions. is that always necessary to add the message type to distribution model.
thanks

[http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/add-message-type-in-ale-distribution-model-1192885]
[http://docs.sun.com/app/docs/doc/820-5014/ggcpd?a=view]
[http://publib.boulder.ibm.com/infocenter/wtxdoc/v8r2m0/index.jsp?topic=/com.ibm.websphere.dtx.packsapxi.doc/tasks/t_pack_sapxi_Create_a_Destination_Model_BD64.htm]

Regarding Message Type in ALE

Similar Messages

Maybe you are looking for