Regarding Migration From Apps 11.5.5 to 11.5.10

Earlier we were using Oracle database 8i and Apps 11.5.5 and now migrated to Oracle 9i and Apps 11.5.10 and after migration I am facing one problem in my Form which created using Forms 6i, while deleting the data through Apps it giving the error
FRM-40654:Record has been updated by another use. Re query to see the changed,
If I try to delete this same row from backend it is working fine.
If possible then please send your reply also on my persoanl mail id
[email protected]
Thanks
Shishu Paul

Hello Lisa,
I'm embarassed to say that I'm still in the process of migration. Since I need to migrate 3 UC apps (CUCM, UCCX, Unity), I'm being really careful each step and watching out for "fires" every time I did a significant step in the process. I decided scrap out my initial migrate process and start over. I decided to start migrating Unity to UCXN first, then CUCM and UCCX after.
After lots of research on how to use PCD, I was never able to use it with my hardware because of the virtualization license limitation. Here's an excerpt from the PCD administration guide:
Virtualization Software License Types
Cisco Prime Collaboration Deployment is not compatible with all license types of VMware vSphere ESXi, as some of these licenses do not enable required VMware APIs.
The following are compatible with Cisco Prime Collaboration Deployment:
* Cisco UC Virtualization Foundation (appears as "Foundation Edition" in vSphere Client) * VMware vSphere Standard Edition, Enterprise Edition, or Enterprise Plus Edition * Evaluation mode license The following are NOT compatible with Cisco Prime Collaboration Deployment:
* Cisco UC Virtualization Hypervisor (appears as "Hypervisor Edition" in vSphere Client) * VMware vSphere Hypervisor Edition
In my lab, I found that using "cucm_9.1_vmv8_v1.7.ova" worked well for me. I was virtualize CUCM 8.0.3 using this OVA (just make sure DNS and IP address settings are exactly the same). I plan to do a refresh upgrade form here.
Using the 10.5 OVA template did not work for me. I couldn't install CUCM 8.0.3 on it. I would get an error message in the middle of installation.
Hope that helps and good luck. Let me know how you're migration went/goes. Maybe we can help each other out.
-Randy C.

Similar Messages

Regarding Migration from Weblogic 10.3.0 to 10.3.3

We have configured a domain in our weblogic 10.3.0 installation. With in this domain A J2EE application has been deployed with datasources configuration, JAAS configuration.
Is it possible to migrate to Weblogic 10.3.3 without making any changes in our existing application configuration and domain setup?
If yes can any one please tell us what is the procedure?
Thanks in advance.

Hi,
first of all could you please clarify the need for migration from BO XI 3.0 to 3.1, as you can simply apply SP1 on top of 3.0 and it becomes 3.1.
if you have considered this and still needs to migrate, following are the 3 posible options.
1. Live-Live Migration - Import Wizard is the tool
2. BIAR - Live Migration - Import Wizard is the tool
Please reffer the Import Wizrd User guide for the option 1 and 2 link provided in the above thread.
Also the 3rd option is to perform the Databse and Filesystem copy, find the step below.
Launch CCM from the Destination System
Copy all of the file store from your Source implementation to the file store folder for your Destination implementation
Stop SIA - right click and select properties - Go to the Configuration tab - Click on the button to specify the data source -
Select "Copy Data from another Data Source". This will copy the data from your source to the Destination.
Regards,
Ramu.

Regarding Migration from Testing to Development

Hi All,
I am going to migrate from Windows 32-bit to unix 64 bit. I am using hyperion 9.3.1. I dont know, how to migrate from windows 32 bit to unix 64 bit.
I want to migrate Planning, Essbase and Shared Services. This is the first time, i am doing the migration. Please guide me in this situation. Its very urgent for me.
My Doubts
1) What are the files(In planning, essbase and shared Services) i have to copy for the migration?
2) What are the steps, i have to follow during the migration?
Please guide me in this situation. If u have any documents for migration, please share with me. This is my mail id : [email protected]
Thanks,
Lakshmi

Hi,
I am doing the migration for Planning. I am following the below stepts for migration. I am stuck in the middle.
The below are some steps to use in Migrating .
1. Create a new database on Production RDBMS Server for your planning application.
I created a new database (MIGRDB)
2. Configure a data source on Production Planning Server.
I configured the datasource
3. Create fresh planning application on Production Server and Ensure the admin is the same as your planning application on Development Server.
I created the new planning application in developement server
4. Go into the database tables for the planning app on Production Server and look at table HSP_USERS; store the SID value against user 50001.
How to find the SID for the new database? Here i want to replace the 50001 with new database sid value(step 1 - MIGRDB)
Please guide me in this situation.
Thanks,
Lakshmi

How to Migrate Mail app from 10.5 to 10.8 without Migration Asst?

Trying to move Mail files from a 10.5 (Intel) iMac to a new 10.8iMac. I tried Migration Assistant, but it caused serious system errors that required reloading entire OS.
I was able to manually transfer all other files I needed except the mail files.
I copied the Mail folder from the older machine to the the Library folder for the user on the new machine, but when I opened the Mail app, it failed.
I read all information from a brody on my previous post regarding migrating from 10.4 to 10.8 and all supporting discussions I could find, but can not find a solution.
Any help?

Peruse Pondini's Setup New Mac guide and consider starting over again and using the Setup Assistant. AFAIK, that never fails.

Migrating from G5

Hi guys - I just got a new MacPro and I'm trying to figure out the easiest way to move my apps and info over from my G5. I started by using the migration tool to bring over all the apps, and then I started mucking with the library to move over prefs and application support files, in the hopes of avoiding any re-registration nightmares, but that seems to have been a bad idea. What's the recommended procedure? (And, if I've botched something in a nasty way, what's the best way to recover?)

Just a note, there is a KB article regarding Migration from Intel from PPC.
http://docs.info.apple.com/article.html?artnum=304302
This probably doesn't cover the gambit of issues that might be causing you consternation but might be a good starting point.
Additionally, there are other factors that might contribute to this. Several applications add their license and registration keys in a variety of locations, typically the Application Support folder, which should have been copied over with the migration assistant.
A typical migration for me begins with backing up to my .Mac using the .Mac sync. This will back up bookmarks, address books, iCal calendar events ect... Then using migration assistant to copy over my user folder to the new machine.

Migrate from JSF to Struts?

Hi
I have seen some threads in this form regarding migration from Struts to JSF. Most of the posters back then (1999-2003) suggested starting with Struts and then migrating to JSF for production.
Now I have one year of experience with Struts in a Tomcat environment and practically no experience with JSF. My current job involves maintaining JSF code. The boss thinks migrating to Struts would make us independent of the company to whom the JSF project was outsourced.
I would like to know your opinion on migrating from JSF to Struts. How hard is it? Our architecture has Views, View Helpers, Business Context objects, Business Delegate objects, Business Processor objects, DAO (DB2, AS/400), DTO, etc. They seem rich enough semantically when compared with Struts that groups all these under MVC, even though they are complex to manage (job security :).
I'd appreciate your feedback.
Thanks
Murthy

To quote Ron Burdundy, "That doesn't even make any sense!" :) Seriously, though (and I admit a huge bias), that seems like a huge step backward. It seems the logic is this: "We outsourced the development of this system to someone else, and now we're left either maintaining it ourselves or paying them to do it, but, if we rewrite it with $FRAMEWORK, we'll be free of them." Is that right? How is maintaining a Struts app different (frameworks aside) from maintaining a JSF app? This is probably obvious, but that's a step I would neither take nor suggest. :)

Migrating From Window Server 2003 to Window Server 2012 for Web server deployment and Developmemt Machine is on Window Server 2008

Hi Microsoft Team,
We need your urgent advice and that is also on priority:
Issue Description: We need to migrate from
WINDOW SERVER 2003 to WINDOW SERVER 2012 while the development activity will be carried
under WINDOW SERVER 2008 as DEVELOPMENT BOX.
.NET Framework Version: 3.5 ( For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
IIS Version: 7.5 (For both DEVLOPMENT(WINDOW SERVER 2008) and WEBSERVER(to WINDOW SERVER 2012))
Need your quick advice Is that configuration feasible for Development and
Deployment (Web Server).
Highly appreciate your response as this will depend which product we need to buy also if you feel any showstopper or concern. Please let us know.

Hi,
As suggested by Tim, in order to get better assistance, we can ask for help in the following IIS forum.
IIS Forum
http://forums.iis.net/
In addition, regarding migrating from Windows Server 2003 to Windows Server 2012, the following blog can be referred to for more information.
Step-By-Step: Active Directory Migration from Windows Server 2003 to Windows Server 2012
http://blogs.technet.com/b/canitpro/archive/2013/05/27/step-by-step-active-directory-migration-from-windows-server-2003-to-windows-server-2012.aspx
Best regards,
Frank Shen

Uncaught exception after migration of App server

After migrating from app server 6.5 to 7.0 I'm getting lot of uncaught exception. like the following
Can some one help me.
FYI: We did not migrate our web server. it's still sunone web server 6.0.1
Uncaught Exception in AccessNKServlet
java.lang.RuntimeException: Read of HTTP Request POST parameters failed: read < content length
     at org.apache.catalina.connector.HttpRequestBase.parseParameters(HttpRequestBase.java:708)
     at com.iplanet.ias.web.connector.nsapi.NSAPIRequest.parseParameters(NSAPIRequest.java:724)
     at org.apache.catalina.connector.HttpRequestBase.getParameter(HttpRequestBase.java:741)
     at org.apache.catalina.connector.RequestFacade.getParameter(RequestFacade.java:166)
     at com.iplanet.jato.view.RequestHandlingViewBase.acceptRequest(RequestHandlingViewBase.java:187)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandlerInternal(ViewBeanBase.java:616)
     at com.iplanet.jato.view.ViewBeanBase.invokeRequestHandler(ViewBeanBase.java:589)
     at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:945)
     at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:616)
     at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:474)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:720)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:309)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:203)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:505)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:157)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:598)


It's due to recon issue. OIM has many recon processes. One such process is LDAP-OIM sync job that runs behind the scene.
It may be an issue with the 'trigger table value' which recon job depends. If 'trigger table value' is not set properly, you may get this issue.
Do this workaround:
http://identityandaccessmanager.blogspot.com/2011/08/reconciliation-issue-misfirehandler.html

Migration from Documentum to OCM

Hi
Anyone has some document or guide, can be overall document or especific, regarding migration from Documentum platform to OCM?
There is this possibility in a huge client.
Best Regards
Luis

It's probably worth contacting Oracle Consulting and asking about the internal Content DB migration toolkit.
This toolkit is currently available only internally (due to support requirements) - and is driven by pushing data from source systems in to a documented schema/structure contained in the Oracle database.
We have a tool which in-turn will process the data found in the various tables of the schema, and will respond by creating the necessary objects in the Content DB instance.
cheers
Matt.

Concept questions (editing jpegs, migrating from Album/Elements)

Hi Lightroom experts,
I have a collection of jpegs which I have been organizing in Adobe Album, and now Elements 5.0. I was pleased to see that Elements 5 could write the metadata (keywords) to the jpegs rather than relying upon a proprietary database. It was clear to me that in Elements the keywords were in a separate database and one had to expressly write the tags to the files.
In Lightroom there is also a separate database (which requires management - like backing it up on a regular basis). What is not clear to me is how to write the metadata/tags to the original jpeg files. Does that happen automatically or must I instruct Lightroom to do so?
Must I export the files in order to write the adjusted metadata? If so, that means I have two copies (original and exported).
Secondly, I have both Photoshop CS2 and Elements 5.0. Lightroom only has an option to Edit In Elements but I want that option to be Edit in Photoshop. It is unclear how to change that configuration.
Finally, does anyone have any comments regarding migrating from Album/Elements to Lightroom for an amateur photographer like myself? Would you advise that? (I do like what I've seen in Lightroom but need to understand much more).
Any help/pointers would be appreciated.

Fielding,
I switched from Elements 5 after only a few weeks with it when I saw the great improvements in Lightroom from beta 4 to version 1. Several reasons for my switch. One, Elements only supports a few metadata tags, mostly keywords. I needed more to do what I wanted to do. Many people use collections in Elements for things that aren't in my opinion suitable, like for keeping trip or event pictures together. You can have that information in metadata by choosing an appropriate metadata field and using it. I'm using Job Identifier in Workflow myself. So I find the metadata support far superior in Lightroom. I was also concerned that Elements, being a product for hobbyists, would not be able to handle the large number of images I intend to put into the database. I already had trouble with the elements database ballooning so I was very concerned. I also think it has about the ugliest interface I've seen in a long time. I suppose the latter doesn't matter, but LR is SO beautiful!
I can't help you with how to get photoshop to show up. Did you try Edit/Preferences? If Elements is the first one there, the second one allows you to choose. Which Photoshop do you have? Before I got CS2 I think I did have PS find it for Lightroom.
You can ask Lightroom to write out the metadata but it does not do it in such a way that you can see it in some other applications. When it says it writes it out as XMP it means it. It's in there, but you can only see it with applications that can read XMP as opposed to IPTC etc. When you export, it does write the metadata in the way most products expect it. I've decided not to worry about this though because a) I back up my lightroom database, and b) if I do decide to abandon Lightroom, or it abandons me, I will in any case have to export everything because without exporting you don't have the Develop adjustments either. Then I back up my LR backups and my image repository, usually nightly.
My migration from Elements did not go very well but I was lucky because I'd just started entering stuff in Elements when I abandoned it -- so I didn't lose much. You can do a search of this forum, maybe on the word elements, to see several threads about the problems people have had. If you have everything in Album you might try a transfer from that first and see if it works. You can always toss your LR database if you want to try a different way of loading it. You do not have to move your files to import them into LR.
If you want a catalog, you will need a database so you get reasonable response on queries, which is presumably the reason for wanting a catalog. Both the Elements database and the LR database are standard databases that you can manipulate yourself, should you choose to do so. Elements is Access, LR is SQLite. I did look at the Elements db but haven't done anything with the LR database. I hope I don't have to because LR can export the metadata. Collections are not in metadata so I'm using collections only for things I don't need to keep.

Customer Reference regardinf Migration from COBOL to Oracle Developer

Hi,
Can anyone please share customer references regarding migration from COBOL to Oracle Developer.
Appreciate if someone can help.
Thanks,

Can you please share some tools / methodology to perform such migrations particularly from COBOL to Oracle Developer??BIG question. Actually, we did it the hard way -- completely rewrote the entire application. Took 4 years with 8 to 10 developers and analysts.
The only tools we used were what you get from Oracle: Forms, SQL Plus, Reports. It was a huge project, done partly to overcome the Y2K century problems.
AS for training, we did not really get any. We just waded in and started writing code ...which definitely improved after about 6 months.
What sort of system are you looking to convert? How much on-line user interface does it currently have? How many data files?

Migrating from ICM scripts to CVP-VXML Apps

Good day all.
Currently we are running on:
ICM 7.2
CVP 4.1
CUCM 6.
Call flow: using ICM-Script Editor
Applications: Using apps deployed on CVP-VXML server. they are called in ICM scripts.
Well my dilemma is this. We have planned to move all call flows from ICM-Scripts to Call Studio based apps/Scripts.
Now I have studied Call studio and VXML flows, and know that CallStudio/VXML scripts can be run directly from Gateway->ICM->CVP/VXML or in the traditional way called in ICM script.
If we deploy a full Standalone model with ICM lookup (no ICM scripts involved) then how is call queing for SkillGroups/agent transfers handled? do call studio based scripts have the capability, or will we have to include ICM scripts for this?
Secondly, when migrating from ICM scripts to Standalone+ICm lookup model, the current gateway configurations (ie apps, Dial plan and Dial plan to script matching for EACH dialed number) will have to be reconfigured? So as the Dialled number will directly translate to the IVR menu on VXML script?
Need expert inputs on this.
Regards,
AAK.

Hi Asif,
When you use the CVP as Standalone model, its purely for SelfService, Queuing is not possible even if you use Standalone with ICM Lookup. There is no concept of SkillGroups using CVP as Standalone
After the self service treatment is done, you can either transfer the call to CUCM or TDMACD
If you need queuing, you have to go for Comprehensive model.
If you want to go for a StandAlone Model, You will need to configure the Application Name, VxmlServer everything in the Gateway. Have a look at the config guide for CVP Standalone section
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/customer_voice_portal/cvp4_1/configuration/guide/cvp41cfg.pdf
Regards,
Senthil

Oracle Apps 11i(11.5.10.2) migration from IBM AIX 5.3 to 6.1 (64-bit)

Hi,
Is there any additional steps required after migrating Oracle Apps 11i(11.5.10.2) from IBM AIX 5.3 to 6.1?
Regards,
Kiran

Is there any additional steps required after migrating Oracle Apps 11i(11.5.10.2) from IBM AIX 5.3 to 6.1? Are you cloning or upgrading the OS?
If you want to upgrade the OS, then you need to make sure you install all OS pre-req software and packages aftet the upgrade and relink executable files.
How to relink an Applications Installation of Release 11i and Release 12 [ID 356878.1]
Recommendations To Install Oracle Applications 11i [ID 294932.1]
Oracle Applications Installation Update Notes, Release 11i (11.5.10.2) [ID 316806.1]
If you want to clone, then make sure you have all OS pre-req. software and packages installed and use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
Thanks,
Hussein

Migrating WebServices app from Tomcat to Glassfish...

Hello!
I've a WebService app. which now runs on Tomcat 5.5.23 and was written using JAX-WS. I've install Sun Java System App. Server 9.0 and I intend to migrate our app. here.
The application is delivered as a war file which I've already deployed in glassfish using admin GUI of asadmin. I can see our app. at WebApplications section but I can't see it under WebServices section, although it seems at a first view that the application works and respond to client's request.
I'd like to ask you if I need to use a special tool for migrating our aplication or what I did is enough and there is no need for other changes.
Thank you very much
With best regards,
Sorin

If I understand correctly, you are trying to load a few properties files on WLS that is specific to an application that you are migrating from tomcat to WLS. If that is the case, then as per my understanding we have the following options:
a. Add all the properties in a jar file and add the same to the classpath or place the same in the lib directory of the server which can be picked at the server start-up.
b. Place the properties file in the domain home which should help.
Refer: loading a new properties file without restarting the managed server
c. Else place the properties files in the web-inf of the application, that should help.

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

Regarding Migration From Apps 11.5.5 to 11.5.10

Similar Messages

Maybe you are looking for