Regarding MSC2N and MSC3N: Batch Display and Batch Change

Hello Guys,
I have faced a problem regarding batch display and batch change.
Scenario:
I have created a Process Order in COR1.
Using MIGO i made the goods receipt of that Process Order.
Now when i want to display for that particular material document number Details data..
In Batch --> Classification (you can check it also from MSC3N using the batch number of the particular material) there is a field named Availability Date its coming 0000/00/00.
But when i checked it from MSC2N in cange mode its coming with desired data.
Any valuable idea..
Regards,
Sayak

Hi,
This looks like a SAP Functional Query. Please post this in MM forum for quicker replies.
Forums->SAP Solutions->ERP - Logistics Materials Management (MM)

Similar Messages

  • I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

    I am programming a DVD-Rom in DVD Studio Pro 4 and need to display and open pdf files, any suggestions?

    http://documentation.apple.com/en/dvdstudiopro/usermanual/index.html#chapter=22% 26section=9%26tasks=true

  • Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

    Hello there
    I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
    i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
    why is it not working...

    have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

  • Downloaded photoshop elements 12, installed ok and activated, started it and splash screen displayed and app launched then shutdown

    Downloaded photoshop elements 12, installed ok and activated, started it and splash screen displayed and app launched then shutdown immediately.
    Repeat and crashes again. Help it won't start!

    Solved! Tried everything in the support documents and none of it worked. Massive frustration with Adobe Chat staff who know nothing and just kept telling me to look at the support documents over and over. They also gave me a contact number in Australia that has a recorde d message saying the product is not supported! What is that about?
    Finally Anand from Adobe tech support called me (from when I reopened the original support case that gave me the serial number).
    Just had to rename folder SLCache in c:\program files(x86) and reaccept the EULA and reactive. Now everything works fine. Way to hard.

  • I have a iPad 2 in version 6.0.1 and won't display and update to ios7

    I can't update to ios7 from my iPad 2 version 6.0.1 because when I check for an update it says up to date and doesn't display an update, any help?

    Update your computers iTunes account.   Should be version 11.1
    Turn off wifi and cellular and update via cable after a full back up

  • HP OJ Pro 8600-N911a, W-7 USB, lost natural Scan and Ink Level displays and/or capabilities

    HP Officejet Pro 8600 e-All-in-One Printer - N911a
    printer connection = USB (no wireless)
    operating system = Windows 7 64 bit
    Windows 7 64-bit OS
    laptop computer = HP Pavilion DV7-6187CL
    no recent hardware/software changes by me that I am aware of
    »HP Pavilion dv7-6187cl Entertainment Notebook PC
    Product Number: LW178UA
    Version: 4.3.0.21 @ OS: Win 7 Service Pack 1, 64-bit Operating System
    HP Officejet Pro 8600 e-All-in-One Printer - N911a
    printer connection = USB (no wireless)
    operating system = Windows 7 64 bit
    Windows 7 64-bit OS
    laptop computer = HP Pavilion DV7-6187CL
    no recent hardware/software changes by me that I am aware of
    »HP Pavilion dv7-6187cl Entertainment Notebook PC
    Product Number: LW178UA
    Version: 4.3.0.21 @ OS: Win 7 Service Pack 1, 64-bit Operating System

    Hi,
    Can you go to the desktop icon "HP Officejet Pro 8600" and double-click on the icon. Then under Shopping Resouces, click on the "Estimated ink Levels" link? May i know what message is displayed after you have that clicked? 
    If my answer was helpful please click on the “Thumbs up “ button on the left to say Thanks.
    Accept as Solution if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • MBA and iMac as display and external storage

    Hi there,
    I currently have only Macbook Air 2012 and I know that buying an iMac I can use it as an external monitor (price is almost the same as Thunderbolt Display). I'm thinking if connecting iMac to my Macbook I could access iMac's HDD (to use it as an external storage for films, photos since my Macbook is only 128GB ssd). Also if I can connect USB devices into iMac's ports and access them on my Macbook like it's possible with the Thunderbolt Display.
    Thank you!

    OK, i found that apart from Target Display Mode there is also Target Disk Mode. But can I combine them at the same time?
    (I want to have iMac as external hdd and display, but browsing OS and apps from my Macbook).
    Also, do I have enough ports in my Macbook Air (2012)? Thunderbolt goes for screen sharing, but I heard that for Target Disk Mode I need firewire cable? Do I have this port at all in my MBA?

  • I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

    I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

    If your MBair is a 2012 model, it has a Magsafe 2 power connection.  The monitor probably has the old magsafe connection.  If this is the case, you need this adapter.
    http://store.apple.com/us/product/MD504ZM/A?fnode=5a

  • Solidworks graphics issues and macbook pro display and colours.......

    ....don't look quite right!
    The contrast on the screen seems to be too harsh - but it is set at it's lowest point on the contrast slider. This is particularly apparent with shades of white to grey - an example is on the google homepage where I can see the grey outline or the search box on the top and down the left, but not along the bottom and up the right hand side.
    In short, the display quality compared to my old ibook G4 is poor (although much brighter)
    This problem seems worse working in XP under bootcamp than in OSX.
    Also, I am having more serious graphics problems using solidworks in XP under bootcamp. Highlighted faces not highlighting, buttons not appearing to be pressed etc. Only small but VERY annoying!
    Any suggestions greatly appreciated.

    oops.....
    that should be 'grey outline ON the search box'

  • TS1286 what can I do if I cannot sync with ITUNES as USB is not recognised, iphone is not charging and apple icon displays and then dissapears - loads and then dissapears....?

    I started having issues charging my Iphone and found that if it was switched off and on mains power it would charge.
    It does not allow syncing with Itunes and or usb conncection.
    I have a lot of photos on my phone that I have not been able to save (USB issue) and I am worried about retrieving these.
    If my phone is connected to mains power - the apple icon comes on - then it goes off - then a few seconds later the icon comes up again and then off again?
    Help please.
    Thanks
    EJ

    You need to do a Force Restore:
    http://support.apple.com/kb/HT1808

  • Thunderbolt display and macbook pro calibration

    I have a macbook pro mid 2011 and a thunderbolt display and they both have been calibrated by a Spyder device, I sometimes grade images on my laptop but when I get back to the office the shots look different, any ideas?t

    I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
    I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
    Clinton

  • Picklist -- display and value attribute

    Is there a way to get and store both display and value attributes from the picklist? I would like to store the display attribute and the value attribute of the selected item from the picklist. It seems like it only returns one attribute. Thanks!

    Get an instance of messagechoice...
    there are two methods.
    setListValueAttribute("ViewAttributeName");
    setListDisplayAttribute("ViewAttributeName");
    you can get both values...
    Anoop

  • I have a new MBP with high-res display, and the color seems washed out compared to my old MBP.  Is this normal?

    Putting the two laptops side by side, blacks on my old machine look dark grey on the new one.  I also have 24" and 27" cinema displays, and the new high res laptop display looks washed out in comparison.
    I have tried to recalibrate the screen color settings, but this doesn't seem to make much difference.
    Any help would be much appreciated!
    Thanks,
    David.

    Yes, the gamma settings are the same on all 4 displays (my two laptops and the two displays).
    After a little experimentation, I think that it's down to the brightness of the high resolution display.  It would seem that it is slightly dimmer than the low-res one on my other 15" MBP, so I think that Apple have set the default colour profile to be slightly washed out to compensate.  If I use the same profile on the high-res MBP screen as on the low-res MBP screen, then the colour is much better.
    The cinema displays are a lot better than the laptop displays, but I was expecting the new high-res display to be as good as the old low-res one - especially as I paid a lot more money for it!
    Ah well!  I think I might take it into the store and just check that it is the norm for this...
    Thanks for your help.

  • MM_SPSTOCK Archive Batch Master and Stock Relevant tables - Display options

    Hello,
    We are archiving Batch Master and Special Stock tables. We have batch configuration set up at material level.
    We have realised SAP does not provide a infostructure to display through SARI archived batches. Also read program MMREO210 is not very elegant and required the archive session to display further information.
    We know that this object allow to archive partially: stock level (MCHB), plant level (MCHA) and finally if all dependencies are okay, batch master (MCH1).
    Can we display archived batch data using any standard SAP transaction? As QA03 for Archived Lots or similar.
    How should we create the infostructure for SARI access? MCH1-MCHA mapping? We are having problems when only MCHB entry is archived.
    We are interested at least in a list of material / batch / plant archived with production date, SLED... key batch master info mainly.
    Thanks a lot,
    Manuel Perez Lombard

    Not much available in standard.
    report MMREO210 and  MMREO221 (tcode MM75)

  • Transaction CJI3 AND  - batch job and output in excel format

    We are trying to schedule a batch job and would like to have the output in an excel file.  Is there a way to enhance CJI3 and FMEDDW to have the output in a excel file.  I've looked at the Layout for creating the disvariant and I know you can have the output in excel format in the foreground, but I'm looking to put an excel file on the SAP DIRECTORY.
    Has anyone done this?
    Thank you.
    Linda

    Talking about Enhancement Options, I believe you can achieve it using Enhancement Implementation. There must be one towards the end of the program just before the ALV is displayed. You can create an implementation of the implicit enhacement spot and output the file to a location maintained in some VAR (to keep the output location dynamic as we don't have it on the select screen).
    My reply is not to the point but I hope you find a way using enhancement spots.
    Should you need any help with enhancement implementation, following blog is good enough:
    Blog - [Enhancement Framework|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417800%29ID1759109750DB10206591421434314571End?blog=/pub/wlg/3595]
    or you can ask back here.
    regards,
    Aabhas
    Edited by: Aabhas K Vishnoi on Sep 24, 2009 10:40 AM

Maybe you are looking for