Regarding Network card

Hi Team
I just want to confirm a
point..regarding network
card..when I Start
MMConsole root it gets started also work process come to wait state but when I open the easy access screen and give any Tcode it says "work process terminated session restarted"...
ok when I give some command in command prompt saying .....
sqlplus /nolog then
connect /as sysdba..
it sometimes says
connected to an idle instance and sometime says connected ...now if at all I go back to SAPGUI and when I login into Easy access screen it takes time to process the command and then it gives the same message "work process restarted session terminated"....
now One of my friend says there is some problem with network card ...So your database gets disconnected.Is it the same problem...plz suggest a solution.
manjula

Hi,
Problem may be anywhere, you need to follow complete check so that you can trace the error.
First of all check whether your database is up or not, then check all processes from MMC and later on try to connect through GUI. If everything is working and still you face problem to connect then it may problem of your ports or may be network card.
Hope this help
Regards,
Rajesh

Similar Messages

Reading the data from network card

Hi,
java.net defines the class NetworkInterface. Currently there are two network cards, one is wireless and another is for LAN.I am able to retrive their names and IP addresses using NetworkInterface methods.How to read the data from a specifc network card? Can we read all TCP packets which are passed through network card?
using socket?
Regards
prasanna

pdiwadkar wrote:
Hi,
java.net defines the class NetworkInterface. Currently there are two network cards, one is wireless and another is for LAN.I am able to retrive their names and IP addresses using NetworkInterface methods.How to read the data from a specifc network card? Can we read all TCP packets which are passed through network card?
using socket?
Regards
prasannaYou may already know that Java is not good at doing some 'low level stuff'.
You cannot use (pure) Java to access the raw network data.

How to web filtering via two network cards?

I have Installed Server 2008 and two network cards
on my pc. One LAN card for clients access and one for internet router. I need to share internet connection to my client computers with
web filtering. So how to do that? I need to block some sites to client access.

Hi,
According to your description, my understanding is that you want to use the WS 2008 to share Internet connection and provide web filtering function for internal clients.
Internal clients –(NIC1) WS 2008(NIC2) – Internet router – Internet network
Manually assign IP address, default gateway, DNS server, etc. on NIC2. Manually assign IP address, DNS server, etc. on NIC1.
Install Network Policy and Access Services – Routing and Remote Access Services. Detailed steps reference:
Install and Enable the Routing and Remote Access Service
https://technet.microsoft.com/en-us/library/cc770798(v=ws.10).aspx
Then open Routing and Remote Access and start configuration. Enable NAT on NIC2 to transfer IP address. Detailed steps reference:
Enable and Configure NAT
https://technet.microsoft.com/en-us/library/dd469812.aspx
Windows Server itself does not support web-based filter, third-party tools with application-layer firewall might be needed to realize this function. Configure WS as a router, it supports IP packet filtering, which specifies which type of traffic is allowed
into and out of the router. Reference：
https://technet.microsoft.com/en-us/library/cc732746(v=ws.10).aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Network card installation

I've tried installing 2 different network cards (Linksys TNE100TX; 3COM 3C509B Etherlink III). I think my problem is that I'm a novice user and don't know how to install a network card and assign an IP address. I've found the Linksys card on one HCL (although it's not listed in my Solaris 8 documentation on my disk), but can't find the 3COM card. Are either one of these cards compatible? Do I need drivers?
I'm on an Intel platform with Solaris 8. I am connected to a Linksys router (to share my DSL line). The router has a fixed IP address from PacBell, but uses 'DHCP' to assign IP addresses to my 3 computers.
How can I let my UNIX system know I'm using DHCP?
How do I assign the router IP address? Do I use the route add default command? Do I use the default gateway address or the router IP address for this?
Do I need a DNS/hosts table? Should I edit the /etc/nsswitch.conf file to add 'dns' to the 'hosts' line?
Do I need to edit the /etc/resolv.conf file, putting in my primary and secondary name servers (from Pac Bell)?
Also, on boot I get an error message: Can't register INT for PCIclass, 0C0300 device at IPL 1 because conflicts with IPL 14. Can you explain what this means and how to correct it?
As you can from my questions, I know some terminology (from my books), but don't really have a good grasp of what I am doing yet. I just started learning UNIX.
Thanks for any help you can give me on this.
Bill Lazar

Recently I have installed S10 b63 on a X86 PII machine.
Regarding the 3com nic - 3c905c - the installation and running with elxl driver was ok.
Now I want to change this nic for an other 3com nic -3c905, but encountered following problems:
When I put new nic in same pci slot and boot up solaris I get a row of errors and don't get trough the boot process.
-Errors are caused e.g. by the different MAC address of the NIC, and therefore no NIC is recognised at all.
-Boot hangs because a NSF request is made at boot, but is not rewarded as NIC is not active.
Changed my strategy to adding a second 3com NIC (both using the elxl driver) and followed the hints from Juergen Keil (above), but " ifconfig elxl1plumb " results in "no such interface"
I have looked on the web and in the documentation for a solution, but so far I have not found how to go about this, other that doing a complete new solaris installation.
Any help appriciated !

Unauthorized network card is plugged in - Intel 7260 Wireless-AC PCI card

I tried to replace the wireless card (Intel(R) Centrino(R) Ultimate-N 6300 AGN) in my ThinkPad W530 with Intel Wireless 7260-AC card.
I got the following error message during start up:
Unauthorized network card is plugged in 8086/08B1/8086/4070
The intel wireless 7260-AC should be used by new thinkpad W model such as W540.
Is there anyone know how I can resolve this problem?
Thanks a lot!
W530 2436-CTO, i7-3610QM, Quadro K1000M 1920x1080 Display with color sensor, 32GB DDR3 1600 RAM, Intel 256G SSD,500GB 7200rpm Hard Disk, BIOS 2.59

Unauthorized "ways" that would likely put any warranty at risk.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Which network cards works with Solaris 8?

Hi,
I am installing Solaris 8 on a PC but I am having a problem finding a network card that the system will recognise.
I have tried HP and Intel cards but always see the error message "iprb: iline value out of range: 255"
Is there a particular brand/model of card that I should get?
Any help would be much appreciated.
Jon

Hi,
You refer this URL: http://soldc.sun.com/support/drivers/hcl
Here you will get the compatibility list for solaris 7 and solaris 8 versions.
revert back.
Thanks.
regards,
Senthilkumar
SUN - DTS

What are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air

what are the Processor, Operating system, hard drive device, Total Memory, Network card, System Graphics of the Silver ipad air?

"Memory" in this case means RAM, the working space for the processor in the iPad. It is different from storage space, the latter being what is referred to by the "32GB", "64GB" etc. specification.
Regards.
Message was edited by: varjak paw

HP Management Pack - why would a rule be used for a network card error?

Hi,
I am asking this question with regard to the HP proliant management pack but my question is about the more general "rule" v "monitor" question which generally I understand (I think).
We get alerts for HP network card failures. This is rule based and basically looks for event "2" in the event logs. The same thing happens though if a cable gets pulled or a switch fails for a few seconds for instance.
The question I am getting asked by admins is to override this as its a "false alarm". I have pointed out people shouldnt just pull a network cable (maintenance mode please!) and if switches are failing then use the SCOM alert to let the network
team know... Plus if the card genuinly does fail this is the alert. BUT they are asking why isnt this a monitor anyway? If the network card is OK I think event 4 gets logged. So why didnt HP write it as a monitor that would close when it sees the success event?
My main thinking was if they had you wouldnt get to know about intermitant faults that dont last long. For instance the card would be down for 30 seconds but the monitor would close as soon as it was back up and you wouldnt see it.
Any thoughts?
thanks

My guess is because they have tools that compete with MSFT and do not sell their MP's. So now they have to have one of their own FTE's creating a management pack for a competing product to monitor their hardware. If it worked better than HP Openview,
then maybe more people would switch to Openview and dump SCOM...
Honestly it comes down to resources, and the fact, similar to MSFT management packs, they are FREE, so how can you justify spending all the time and resources to create something and then give it away for free? You can't, so you speed through it, and
drop it to the public, let them find the issues, and stress test it, etc. (not a fact, just my honest opinion after working with this product for over 13 years). MSFT is guilty of this as well, they have had their fair share of problem management
packs...but they are FREE.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

1802 unauthorized network card - but FRU is listed in the Hardware Maintenance Manual

I have an x130e (0622-23U) and wanted to update my wireless card. I looked up the compatible cards in the Hardware Maintenance Manual. It listed several, including FRU 60Y3241, Intel Centrino Wireness-N 1000. I bought a card matching this description on Ebay. It arrived and is labeled as advertised. It shows Model: 112BNHMW.
When I installed it and rebooted, I get the BIOS error 1802: Unauthorized network card is plugged in.
Did I buy a brick from from Ebay? (Wouldn't be the first time.) Or is there something else that I should be looking for when I shop for a compatible wireless card?
Thanks,
Solved!
Go to Solution.

Good evening.
One detail that *may* explain why you're getting the 1802 error with a card that is listed in the HMM and presumably has a legit FRU label:
On page 85 of your HMM ( http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x130e_hmm_en_0a96359_03.pdf ), item 15 is the WLAN adapter. The first grouping of MTMs includes your 0622-23U (denoted as 0622-23x). For that group, the listed FRU P/Ns are: 60Y3247 and 60Y3249. The remaining 4 groupings of MTMs do not specifically include yours. The 60Y3241 FRU is specified for 2338, 2339 and 2340 machines.
Just a hypothesis.
Regards.
Edit to add: Digging a little deeper, specifically, looking at the readme file for the BIOS update in the driver listings, it appears that there are different BIOS versions for different MTM families (23xx vs 06xx, generally) - "8Q" and "8R" prefixed. So it's not impossible that the BIOS whitelists also differ. Just an observation.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Intel network card

Hi all,
After few days struggling with laptop install for solaris 8, at the end of the day, I successfully run solaris 8 on my laptop. I got my built-in network card to work and graphic card to run at best resolution.
One thing I'm not quite sure is error message that I received after few hours doing network stuff. The error msg as below :
"WARNING: iprb0: statistics generatefailed."
"WARNING: iprb: device never responded."
I tried to bring down the interface and up again but no luck. The only solution is to restart my laptop which is bad. I already applied latest patch for iprb. Anybody could shed some light on this case, please?
Thank in advance.
regards,
zonex

The network card can go bad yes. Here is what i would recommand you do is call tech support and get a case number and send it in for repair also get a shipping address so you can send the thinkpad with the bad network card in for repairs
Thanks
Keep me posted on this.
Matthew C Hilinski Lenovo c200 out of warrenty
ubuntu 9.0

Alternative to Intel Wifi Link 5100 AGN wireless network card?

I'm finding that my Intel 5100 AGN wireless network card is not performing as well as it used to. I've tried everything... even drivers are fully up to date. But I keep losing connection to my wireless router, even though connection strength is between 3-4 bars. I find that I rarely get dropped if I have 5 bars. But if it weakens to 3, I get periodically dropped no matter what wireless network I am using.
I want to replace this card with something better, but of course compatible with the HP dv5 (my specific model is dv5t-1000). Any recommendations?
"If you keep an open mind, life will give you more possibilities."
This question was solved.
View Solution.

Hi, Gary:
What I meant by my statement regarding you having the better of the available cards for your notebook is that, yes, I am sure the Intel 5300 is an improvement over the 5100, but the problem is you can't install the 5300 in your notebook.
The Intel 5300 is not supported (only the cards/part numbers listed in the service manual can be installed) and your notebook wouldn't boot until you removed the card.
You can try a different card listed in the manual if you want.
However, you are limited to the:
Broadcom 4322 802.11a/b/g/n WLAN module
Broadcom BCM4312 802.11b/g WLAN module (not a wireless N card)
I suppose you can use an external USB adapter but I would get one with an external antenna connected to it, because I would have to believe the 3 antenna wire setup in your notebook has to provide superior reception over a plain USB wireless adapter with an internal antenna as its only antenna.
The antennas go all the way up to the top of your screen.
Did you fiddle around with your network card's advanced settings? They can be found by clicking on the card in the device manager, clicking on the advanced tab. make a note of where the settings are now so if something goes buggy, you can change them back.
Here is a guide to the advanced settings you have and the recommended settings for them.
http://www.intel.com/support/wireless/wlan/sb/CS-025393.htm
Paul

Bad network card

It seems as though the network card in my L7680 has failed. What is the best way to get this fixed/repaired/replaced? I have already done the typical troublwhooting - new cat 5 cable, different port on switch, etc. Totally dead - no link light.
Thanks.

Hi Kevin1000,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Some VM don't recognize virtual network cards

Hi all,
I have an hyper-v install with a dell T320 server with two ethernet cards from Broadcom and Windows Server 2012 R2 as hyper-v server.
I have one VM with 2012 R2 and one another host with 2012 Std. All the systems are working fine since we make the install.
Since this morning I see that the 2012 Std server is not able to connect to the network.
I shutdown all VMs, delete the Vswitch, delete the physical network card, restart the host, recreate a new vswitch and reconnect the VMs to it. I access the network on 2012 R2 but in 2012 Std the OS see no network card.
What can I do.

Hi Derick,
Please try following steps :
1. Configure Device Manager in the VM to show hidden devices (the article says it is for XP but it works on all Windows OS')
https://support.microsoft.com/kb/315539
2. Delete all virtual NICs and when you delete the last one, also delete the driver when prompted.
3. Shut down the VM.
4. Remove the NIC from the VM settings.
5. Start the VM with no NIC.
6. Log in to the VM, then shut it down again.
7. Add a NIC back to the VM.
8. Start the VM again.
9. Configure the new NIC with a static IP.
10. Reboot and see if that resolves the problem.
If it still doesn't work , I would suggest you to attach the problematic VM's VHD file to a new VM .
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Network Card for HP Laser Jet 2420

What type of network card do I need do I buy to put this printer on a network?

Hi,
Sorry, looks like no other choice since they (all models of the series) shown on the following links:
http://h10010.www1.hp.com/wwpc/au/en/sm/WF10a/18972-18972-3328059-3328066-3328066-416419.html
http://h10010.www1.hp.com/wwpc/us/en/sm/WF13a/18972-236251-236263-14638-f51-416419.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

X230 / mSATA SSD - Will not allow boot (unauthorized network card)

this is killing me. I just got a crucial msata ssd. i went to install and the thinkpad whitelist fcc crap is giving me trouble. the system thinks it a network card and is therefore stopping the boot. i see others have installed msata on x230 and I have done this on other models as well.
does anyone know a way around this that doesn't envolve changing the bios to a custom bios hack?

Hello,
I don't have an X230 myself, but have you tried using a different MiniPCIe slot? On my X220, only one of the MiniPCIe slots is mSATA compatible. Perhaps it is the same way with the X230.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Regarding Network card

Similar Messages

Maybe you are looking for