Regarding new confirmation profile

Dear Experts,
have created new confirmation profile(SAP001) through OPK0 and created all detail areas as required.but now i am facing following problems.
1. I am not getting the message "Activities are recalculated due to quantity change (please note)" when i change
Yield to conf quantity.
2. Activities like POWER ext. are not reinitilizing as per Yield to conf quantity.
Earlier it was working..
Thanks&Regards
rvyas

Dear,
Go to OPK4 tab operation indiv entry make sure that qty and service all tick to be marked make sure that if the quty is changed the actvities are also changed. And in OPK0 select your profile and go to detail in Default tab select the option immediate proposal for quants and services.
Regards,
R.Brahmankar

Similar Messages

Logic X Additional Content after creating a new User Profile

Hey guys. I have a MBRpro and I'm running into problems with a plugin and diskspace.
I bought East/West Symphonic Orchestra Platinum Plus and Symphonic Choirs and the plugin is killing my CPU on my current User Profile.
Yesterday, I created a new blank user, and its running fine there. I'm guessing because all the systems resources are available without running background daemons from other apps.
After I launched Logic X under the new user, it asked me if I wanted to download additional content. I had already downloaded all the content under the old user, and so I said "no" as I'm struggling with disk space on my retina (6gig free). I played a bit - confirmed the plugin was working fine, quit it/logged off and went back to my old profile.
Today I launched the new user (after logging off from my old profile) and launched logic but now the additional content menu is greyed out. I'd like to know what is going on.
1stly, Is it greyed out only on the new user, because old user installed it all already? If so.. why did it ask me the first time to download additional content?
2ndly, can I verify if the downloadable content library on the older user has carried accross / or is accessable under the new user profile?
3rdly, If the additional content / Libraries are not automatically shared, can I make them available/shared amongst both users, since I don't have the internal diskspace? Moving it all onto an external drive is not the best option for me. I need to keep it all on my laptop if I can.
Thanks for your help guys. I couldn't find anything on the forums regarding content shared amongst users on the same machine. Called Apple Care and they sent me to you guys. :-/
Cheers,
Geo

Hi,
I had some problems with my audio interface, but they were solved with the last Logic update. Which version are you on?

How can i start a new user profile service in ordre to replace an old one ?

hi
i create a new user profile service in ordre to replace an old one
when i use : Get-SPServiceApplication i can see that hi is created but
when i use Get-SPServiceInstance i can see it i can see only the old one

Hi,
The Get-SPServiceInstance returns the services instance for a specific server or the entire farm. The service instance GUID is unique to every farm and cannot be changed.
For starting a fresh with the User Profile Service configuration, you can unprovision and re-provision the User Profile Service:
http://sharepoint.stackexchange.com/questions/16146/deleted-service-application-service-instances-remain
http://www.harbar.net/articles/sp2010ups2.aspx#ups14
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Confirmation profile selection based on material

Hi All
Is it possible to have a confirmation profile based on the material which is being produced in the Production order? If yes then please give me your suggestions on how to achieve this.
regards
PK

Hi Madhu G
I have defined the confirmation profile in Opk0. I know that I can assign a different profile with reference to user.
I dont want confirmation profile based on Storage location
I want the confirmation screen to be different for different materials -plant combination. Does anyone have any idea how this can be achieved?
regards
PK

Use old domain controller AD user profile with new domain (profile changed)

Dear All,
I have built Win Server 2012 for Domain migration from Windows Server 2003 to Windows Server 2012. I have tested all thing on VMware including user creation and tested Domain join using power shell for Win 7 and .VBs batch file for Win XP computers all thing
are working fine.
Let 1st I introduce my current environment. I have existing Win Server 2003 domain controller (abc.com) with 130 client computers and 200 users I am going to plan migrate my current environment to Win server 2012 Domain (xyz.com) Keep in mind that Domain
name is changed but Domain Controller (Server) names are same i.e MY-PDC . I have tested domain join on multiple computers using existing clone of client computers and create all existing users using .csv file and power shell with required
credentials and OU.I am facing the user profile issue when I join domain and login with existing user which was previously the user of same computer the required profile does not login and computer creates new user profile in Document and Settings section
of Win XP.
I need your expert opinions because copy old profile data and create new outlook profile for each user is a big headache for any one. Hope you people can understand and help me in this issue.
Please provide best answer and result on priority I will be thankful to all of you.
Regards,
Arsalan

Hi Arsalan,
Please check if USMT can help you to achieve this target.
User State Migration Tool 4.0 User's
Guide
Meanwhile, please also refer to following articles and check if can help you.
How
to Migrate Windows User Profile to New Account
Keeping user old domain profile
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu

BUG: Access Connect Abort, when I create a new network profile.

Where can I report bugs?
My system is windows xp sp2 on X60.
I have been using AC-4.42(Access Connection) for a long time. And before, there is no problem when I added new network profile into it.
But yesterday, I wanted to add a new profile into it. I opened the "create profile" window and input the name of the new profile (I have two network adapters, wired and wireless. So by default, the both are selected. And I left the default selection unchanged.), then "Next". The 2nd window is about wireless config, I configured everything, then go on "Next", at this moment, an error occured and AC aborted with four error windows. The titles of those windows are "ACMainGUI.exe error" and "ACMainGUIWnd: ACMainGUI.exe".
Then I did it again, I opened the "create profile" window, and this time, in this (1st) window, I changed the selection of network adapter, besides inputing the name of the new profile. I only selected the wired adapter, and then "Next". Sadly, this time the 2nd(next) window did not appear(pop up) at all. Instead, those four error windows poped up one by one. AC aborted again.
I repeated the above operations many times, and everytime, AC aborted.
So I went to the online "support and download" to look for some updates about AC. And I found AC-4.52 with luck. After downloading and installing, unfortunately the problem still exists. AC-4.52 still aborts when I create a new network profile.
So now, what to do. I have no ways. I am expecting the developers could note this problem and fix it and give me a newer update as soon as possible.
Sigh...

I have exactly the same issue. Next to the actions mentioned by ixbm I have also fully uninstalled and reinstalled the AC-4.52, but this didn't help.
Any idea on how to solve, installing older version?
regards,
Bart

Creating a New Forecasting profile for MRP

Hi there,
Please can somebody let me know how do I create a new Forecasting profile for MRP.
I want to see this in table MRPR once created. (field PROPR).
Kind Regards,

Dear marelizen
Use transactio code MP80.
Creating a Profile
The information contained in this info object is relevant to the material master for industry and to the article master for retail. Retail customers are requested to substitute:
article for material
requirements planning for material requirements planning or MRP
1. In the Material Master menu, choose Profile ® MRP profile or Forecast profile ® Create.
The initial screen appears.
2. Enter the name you want to give the profile.
If you want to use an existing profile as a reference, enter its name under Copy from so that the system can copy its values to the new profile.
3. Choose Selection screen.
The selection screen appears. It shows all the fields that can be copied to the MRP or Forecasting screen in the material master record.
4. Enter a profile description and select the fields you want the profile to contain, specifying whether each field is to be copied to the material master record as a fixed value or as a default value.
It is not possible to select Fixed lot size and Maximum stock level in a single MRP profile. However, if you select Maximum stock level, you must also select Lot size (materials planning).5. Choose Data screen.
MRP profile data is spread over two screens. To switch from one screen to the other, choose Data screen 1 or Data screen 2.
When you access the data screen from the selection screen, the system checks whether the fields selected are allowed to appear in the same profile.
The data screen appears, containing only the fields you selected on the selection screen. The fixed values and default values are displayed in different colors. All fixed values are required fields except where the field can also be left blank.
If, in the forecast profile, you enter N or 0 as the forecast model, no forecast is made.
Like forecast model N, if you enter forecast model 0 when maintaining a forecast profile, you will be unable to maintain any other field in the profile.
Unlike forecast model N, forecast model 0 deletes any existing forecast values when you change the material. This ensures that these values are no longer included in materials planning.
6. Enter the corresponding values and save the profile.
If the system detects inconsistencies or errors, it asks you to change the fields selected on the selection screen and/or to correct the values. Otherwise, the initial screen appears, where you can begin to create another profile.
warm regards
Ramakrishna

How can I Import CA Certificate into a new user profile when it's created

I need to deploy a CA Root Certificate to new firefox user profile when it is created in windows. I Seen somewhere that you could place a working copy of cert8.db in %programfiles%\firefox-installation-folder\defaults\profile and this would get added when a new firefox profile is created. However, the profile directory doesn't exist in the defaults folder and when I created it this method still didn't work.
Is there a way to get firefox to create new profiles with preconfigured Certificates?
Right now when new users open firefox for first time it is unable to connect to any SSL sites through our proxy server until the user adds the proxies ca certificate or it gets added later via logon script (at next user logon).

Update... For anyone looking for a similar solution:
I ended up adding more to my logon script I have it check for a user's mozilla profile first and if not found it will use command line "firefox.exe -createprofile default" to make one. After that I just copy a working cert8.db to that new profile. Then when the user opens firefox for first time, it will detect this new profile, and it will load it along with the correct CA Certs intact...
Also, for existing profiles my script just uses nss certutil to add my proxy CA Certificate to the users profile cert8db.

E72 unable to create new sip profile

I am trying to create new sip profile from options>settings>connection>sip settings
nohing happens when I select new sip profile using default profile
I hav already reset the phone using *#7780# but problem is still there
please help ?
Solved!
Go to Solution.

*#7780# does not reset the phone. It just restores factory default settings.
In order to reset the phone you need to use *#7370# instead. Back up everything except your settings beforehand because this does erase the phone's C: drive entirely.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Regarding new Reminder app in Mountain Lion: is there a away to sort reminders by due date in the same fashion you can in the iCloud version of Reminders?

Regarding new Reminder app in Mountain Lion: is there a way to sort reminders in due date order in the same fashion as you can in the iCloud version of Reminders?

So true! I have to agree: "It appears Reminders in 10.8 did not get a whole lot of thought put into it regarding how folks actually use reminders."
With Mountain Lion, Reminders no longer resembles a task-management (to-do) app in any way. I used to be able to limp along using it for my to-dos (although it never did accommodate this need well). This upgrade has made Reminders completely unusable for task management.
Once I got over my disappointment, I did some research and decided to try "Things." This application has all the functionality I've been wanting all along. It has a Mac version, an iPhone version, and an iPad version (among others)--and it keeps all devices synched via the Cloud (just not the iCloud ... but who needs the i ?). I wish I'd discovered it years ago. I'm glad now that Mountain Lion put Reminders over the edge; otherwise, I would not have made this discovery.
"Things" (oddly named though it is) comes close to the old Franklin planner software I used to love and haven't been able to find a substitute for. It can import items from Reminders, and it works with Siri. It's a joy to use, and it does everything I want it to do plus some things I never thought of and will use all the time. I downloaded the free trial version last night and within an hour paid for it with gratitude.

Error creating a new user profile service application: The specified database is not a valid synchronization database

When trying to create a new user profile service application on a new SharePoint install I get the following error:
"The specified database is not a valid synchronization database"
The installation then fails and does not create the third database.
I found some threads with similar problems but it involved upgrading an existing db. In this case we want to create a new one. Here is the relevant ULS log info:
Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
The SP15_TEST_ENT_SyncDB database does not exist.
It will now be created.
Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Validate Database: validating sync database
Validate Database: validation failed: Error code -2
Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
I Tried to create another one under a different name (databases also) and I get the same error.
The SharePoint instance has the march mandatory update installed. The sql instance we are using is an existing SQL cluster for other SharePoint poc's.
Has anybody seen this issue before?

I had the same problem and could not figure out what was wrong for the longest time. I then had the idea to check in the model system database to see if there were any extra custom tables in that database. Any tables that are in the model database
are put into any new database when it is created. I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
the user profile service application again and it worked with no errors

Creating a new application profile

Hi Hyperion Gurus,
Need your advice on an issue we are facing now:
In our current application (HFM 11.1.2.2. EPMA), we have created our application profile with only English as the language. We have 3 applications residing on our current profile.
We now have a requirement as to include Japanese as a language. I am aware that I can not make changes to the alias dimension in the existing application. This means that we will have to create a new application profile.
My question is: What will happen to the existing shared library that we use for our current applications? When I create a new application will it impact the old ones?
Any thoughts and ideas are greatly appreciated!
Thanks,
Steffi.

Hi Thanos,
so I did create a new application profile and included the languages I needed. And when I created the application, the Alias dimension is blank.
Here are the steps that I followed:
1. Create a new application profile from the desktop client.
2. Opened work space and created New application from Administer > Consolidation Administration.
3. Registered the application to Shared Services.
4. Transformed the classic app to EPMA in order to use the Shared library
Not sure what I am missing. I have attached a screenshot of the dimension library from my new application.

I created a new account/profile on my Mac OS X (10.4.11) and tried to download Firefox, which I am already using on my existing account/profile, and was told that my system doesn't support Firefox; what's this all about?

I would like to be able to use Firefox on the new account/profile I have created and don't know why my system will support it on this account/profile but not the new one.

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Creating a New Document Profile CS5

I have created a New Document Profile that I want to use as a base when starting Ilustrator work. I cleared pallettes colors, brushes, symbols etc and created 3 new common layers etc. When I select my file from the New Document Profiles pull down menu the Layers pallette opens with only a blank Layer1 .The work on my custom Layers that I would like as masters is gone.

Where did you save the new file?
Looks like you're right. Seems only way is to Save the file as a Template file and use New from template from the file menu.

New Color Profiles not showing up in Aperture3

I've spent hours trying to get Aperture3 to see a new proofing profile with no luck.
We use WHCC (White House Custom Color) for prints and discovered we were using an out of date icc profile for their printer. No big deal, just download the new icc profile and drop it in the ~/Library/ColorSync/Profiles/ folder and... Nothing.
Here are the location's I've tried putting it with no luck:
~/Library/ColorSync/Profiles/
/Library/ColorSync/Profiles/
/System/Library/ColorSync/Profiles/ +(yes I know you're not supposed to put anything in here, but it usually works and is a good place to put things you don't want users to tamper with)+
Putting the profile in any of these locations, the ColorSync Utility sees it just fine, but Aperture doesn't list it at all. I've rebooted, restarted, rebuilt my Library and fixed permissions with no change. Is there a specific .plist file I can destroy that will let Aperture re-discover the profiles on the system?
As a side effect of this process, I moved the old proofing profile to my Desktop. After the now one didn't work, I tried moving it back to see if Aperture would see it... It doesn't anymore. Oddly enough, Aperture does see the display profiles we created for the laptop with our Monaco.
Aperture 3.0.3 on Snow Leopard 10.6.3
I'd appreciate knowing if anyone has run into this, or has any advice.

I had the same issue when playing with my Xerox Phaser 6110 profiled with colormunki. All software except Aperture (3.0.3) recognized the profile (Color Sync, Print dialog, Preview soft-proffing, even LR 3b2). I too tried all possible locations and none worked.
Then I opened the profile in ColorSync, and edited (Profiles -> Xerox... -> Open ->'desc' tag) Ascii and unicode descriptions to read aaa.icc and did a Save As aaa.icc and there it was, available in Aperture, too.
To my great disappointment the soft-proof feature in Aperture seems to be broken for some monitor/printer profile combinations, and is compatibly broken for printing from Aperture. What happens is the resulting image is way too degraded, even beyond the (admittedly crappy) photo printing capabilities of this printer.
IOW printing the same JPG via Preview and/or soft-proofing with the printer's profile yields way more consistent results. Totally unacceptable for a €200 piece of software.

Regarding new confirmation profile

Similar Messages

Maybe you are looking for