Regarding Non cumulative key figure

Hi Friends,
While we are doing Inventory mgmt we use three data sources.
1) 2LIS_02_BX -  why it is used?
( As far my knowledge is concerned This is Used to extract an opening stock balancce means when ever we are implementing the inventory for client then we need to load the historical data )
2)2lis_02_BF - why is it used?
(It is used for material movements How it can be used.I studied some where this is also used for material movement how is this discriminate from above data source)
3)2LIS_02_UM - Why is it used?
Are we using really?
Please explain me?
Thanks & Regards,
Ramnaresh.P.

From help.sap.com
2LIS_03_BX3 Material stock
2LIS_03_BF Material movements
2LIS_03_UM Revaluations
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.

Similar Messages

  • Regarding Non-Cumulated Key figures

    Dear All,
    I wanted to create Multiprovider which includes infocube having Non-cumulative key figures .When I am including that Non-cumulative key figure in the Multiprovider , I am getting an error "Inconsistencies were found when checking MultiProvider ZMULTIPTP"
    detail fo this error is
    Define the characteristics of the validity table for non-cumulatives
    Message no. R7846
    Diagnosis
    The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
    The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
    Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
    Examples of such characteristics are:
    A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
    the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
    Procedure
    Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
    In the example above, the characteristics "plan/actual" and  "plant" must be selected.
    The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.

    Hello,
    See this Validity table for non-cumulatives in a self defined cube
    Thanks
    Chandran

  • Purpose of Non Cumulative key figures

    Whatu2019s the purpose of Non Cumulative key figures?

    Hi....
    There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
    Also Check..........
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
    Re: Non-Cumulative keyfigure example
    Hope this helps.....
    Regards,
    Debjani........
    Edited by: Debjani  Mukherjee on Oct 27, 2008 3:46 AM

  • Problem with Non-cumulative key figure.

    Hi all,
    I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
    <b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
    I have done the following while defining the non-cumulative InfoCube:
    1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
    2. Loaded data to non-cumulative InfoCube from flat file.
    3. Compressed data in non-cumulative InfoCube after the load.
    Note:
    1. Validity area is determined by the system based on the minimum and maximum date in data.
    2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
    Is there any other settings to be done?
    Please help me in resolving this issue.
    Thanks and regards
    Pruthvi R

    Being a non-cumulative KF, total stock is automatically takes care of that.
    Try putting all the restrictions which you have included for total receipts and total issues, for eg,  restrict Total Stock with the movement types used in Receipts as well as Issues.
    Check and revert.
    Regards
    Gajendra

  • Non cumulative key figure is not getting filled based on inflow and outflow

    hi,
    i have a non cumulative key figure which is having inflow and outflow.
    i have these three info objects in dso.
    as i know non *** key figure is calculated based on inflow and outflow.
    i am getting values for inflow and outflow so non *** should be calculated based on this values.
    <b>but the collumn is blank in the dso</b>
    in that non *** keyfigure i have added two info objects in inflow and outflow.
    is there any other setting i nedd to do?
    please sugest me.
    its urgent

    Hi Venkat,
    Have you followed the process right. First Filling the Initial Stocks and then Inflow and Out Flow and then Delta. If you follow the process correctly then you can able to view the Data in the Reporting Level.
    For Initial Stocks the Marker Should be set. For Inflow and Outflow the Marker should not be set.
    Hope This Helps,
    Regards,
    rik

  • Snapshot scenario or non cumulative key figure  in inventory management

    Hi
    We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
    We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100  000 stock movement lines per day (we are retailer!).
    Is there somebody to give me advice about it?
    Tanks a lot
    Anne

    Being a non-cumulative KF, total stock is automatically takes care of that.
    Try putting all the restrictions which you have included for total receipts and total issues, for eg,  restrict Total Stock with the movement types used in Receipts as well as Issues.
    Check and revert.
    Regards
    Gajendra

  • Bad performance with non-cumulative key figures

    Hi All,
    I have a cube with 8 non cumulative key figures based on fiscper.
    I am not sure how the performance for reporting with non-cumulatives can be improved.
    Thanks
    Karen

    Performance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
    For actual stock, the more you compress the better it is.
    Regards,
    Fred

  • When do you go for non cumulative key figures?

    hi all,
    Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
    Can anyone explain me with an example.
    thanxs in advance
    hari

    Hi,
    chk these threads:
    non cumulative key figures
    Cumulative and Non-cumulative Key Figures
    also,
    There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
    Assign points if this helps!!
    Regards,
    Dhanya.

  • Using Non cumulative key figure in Real time cube

    Hi gurus,
    I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
    Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
    Thanks in advance
    Regards,
    Ravikanth

    Hi Ravi,
          Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
    Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
    For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
    Thanks & Regards,
    Balajee.

  • Planning on Non-Cumulative Key Figure

    Hello,
    is it possible to plan data on a non-cumulative Key Figure?
    SAP_ABA     701     0005     SAPKA70105     Cross-Application Component
    SAP_BASIS     701     0005     SAPKB70105     SAP Basis Component
    PI_BASIS     701     0005     SAPK-70105INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
    SAP_BW     701     0005     SAPKW70105     SAP Business Warehouse
    BI_CONT     704     0003     SAPK-70403INBICONT     Business Intelligence Content
    ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04
    We implemented also the How-to Paper Copy and Paste in the Web Template but it isn't working in a proper way. UnderPrerequistes in the How-to Paper I found IE 7.0 and Clipboard. But I was informed that we have an higher Level.
    Thank you in advance for your help.
    Kind Regards
    Doris

    Not possible.Please find the help link for more details.
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
    Regards, Hyma

  • Cumulative key figure and non cumulative key figure

    Hi BW Expertz
    Could any one give me the clarification about cumulative and non cumulative key figures .Why we go for cumulative key figure and non cumulative key figure.If any docs could u just mail to the following [email protected]
    Thanx In advance
    Best regards
    sankar prasad

    Cumulative values are those key figures (KF) that are cumulated using all characteristics, thus also using time.
    Ex: Sales revenue, Quantity....
    Non-cumulative values are those key figures that are measured in relation to a period in time; they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so called exception aggregation.
    Ex: Number of employees, Inventory, Stock prices, Account balance,.....
    AGGREGATION TAB
    Non cumulatives are evaluated by non-cummulative values. Non-cummulative values are special key figures that are different from other key figures (cummulative values) in data transfers and saving as well as in aggregational behaviour. These are measured in relation to a period in time; that is to say, they cannot be meaningfully cumulated over time. Non-cumulative value are summaraized over-time using exception aggregation.
    Non-cumulative values such as 'number of employess' are cumulated using characteristics such as 'cost center'. It does not make any sense, however, to cumulate the number of employees using different periods. The result at the end of any particular period would be the sum total of number of employees for each posting during the period. This would of course be wrong.
    Instead, the aggregation of the KF can be defined as exception aggregation wherein an additional references characteristics is utilized to tell BW which value to use during the period, in this case, 0CALMONTH is used, in the above example, to indicate that only the last value of 0HEADCOUNT, updated by costcenter, is to be taken for any calender year and month.
    Cummulative vs Non-Cumulatives
    The purpose of non-cumulatives is to optimize the data transfer in BW, the data retention and the database access. The data transfer from OLTP to BW is minimized and only the meaningful data is saved and processed.
    It is recommended that you use non-cumulative values for areas that dont change frequently such as warehouse stock or number of employees.
    Non-cumulatives are modeled in BW using a non-cumulative value with the fields belonging to it for storing the non-cumulative or for inflows or outflows.
    Non-cumulative values are stored with special KF that differ in terms of data transfers and aggregational behaviour.
    Features of NON-Cumulative Values Transfering and Saving Data:
    - NC values are mapped uisng one KF for NC changes or two KF for inflows and outflows.
    -NC are transferred in an initialization run and the change runs that follow (initialization can also be omitted here)
    - A non-cumulative value always has a time-related exception aggegation.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
    with Example
    Re: Non-Cumulative keyfigure example
    Re: Types of non-cumulative keyfigures
    /community [original link is broken]
    /community [original link is broken]?forumID=131&threadID=29557&messageID=273049
    /community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
    ****Assign Points If Useful*********

  • Non-cumulative key figure in Real Estate implementation

    Hi all,
        I am implementing Real Estate Module in BW.  We are doing analysis on Condition amount ( BKOND).
        The mapped Info Object on BW side is 0COND_AMT, according to standara info sources given by sap ( for e.g in  0RE_3)  and it is defined as a Non-cumulative KF with Non cumulkative Change  0COND_CHG.
      Can anybody plese explain me the logic behind this. and also source field and table for this 0COND_CHG in R/3 side.

    Hi Ravi,
          Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
    Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
    For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
    Thanks & Regards,
    Balajee.

  • Non cumulative key figure and degenereated dimension?

    Hi experts,
    can some explain with example what do you mean by non cumulative key fgure? what is the advantage of this key figure?
    what is denereated dimension and under what scenarios do we go for degenerated  dimension?
    will be very helpful if you can explain with an example?
    Thanks in advance.

    Hi,
    Please go through the following websites. It should give you a clear understanding about non-cumulative key figures.
    http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/content.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/content.htm
    http://help.sap.com/saphelp_bw31/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/content.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
    Hope it helps!
    Regards,
    Morpheus.

  • Non Cumulative Key Figure help

    Hi All,
    I am in need of setting up a non-cumulative key figure in a cube.  When I load from my ODS everything is ok, however during a delta process, this field at times gets
    summarized when in fact it should be static or in an overwite mode.  Can someone provide some advice/comments on how I can set up my key figure field in a basic cube to be static yet be able to be used in a calculation for a query?  I do not want to apply any functionality such as aggregation, average etc. In R/3 LIS functionality, you basically set up a characteristic Key Figure, how can this be done in BW ?
    Best Regards,
    Dennis

    Dennis,
    Check if you ahve declared the KF properly and also check the query which you use ...
    Load data and then compare with the query at the lowest level of data in the ODS. Then you will know if the update rules are correct.
    Arun

  • Validity table for a Non-Cumulative key figure

    Hi,
    I need to make changes to a validity table for a Non-Cumulative key figure.
    I know initially it is done thru Extras- > Maintain Non-Cumulative value but subsequently how to change the parameters ?
    Best Regards,
    -Anurag Dev

    If you decide later that you require more validity-determining characteristics, you can modify the selection using the report RSDG_CUBE_VALT_MODIFY. In this report, the non-cumulative InfoCube is only changed to the extent that the new validity-determining characteristics are selected and the validity table is reconstructed. The structure of the non-cumulative InfoCube remains the same. You do not have to reload the transaction data for it.

Maybe you are looking for

  • AQ table for complex type creation

    I have a type containing nested tables, it looks like that: create or replace type aq_student_reg_queue_type as object ( XML_ID varchar2(16), trigger_name varchar2(32), tm_transaction_id varchar2(30), tm_transaction_type varchar2(30), person aq_perso

  • Prototype available

    I am pleased to announce that a prototype version is available for Win32 and Linux32. We are willing to gather feedback from experts in the field of AOP, bytecode instrumentation, APM and similar techniques. If you are willing to evaluate this techno

  • BGP icmp Message:BGP: Applying map to find origin for x.x.5.0/24

    I've put what I hope is the relevant portions of the config in the body here. I'm curious about the message as this router is supposed to be the origin for the subnet in the first place? interface Vlan99 ip address x.x.5.1 255.255.255.0 router bgp 65

  • Correction to Dodge Burn T00l

    I' a newbie to photoshop elements (v9). In Philip Andrews book "Adobe Photoshop Elements 9 for Photographers" he covers the Dodge and Burn tools. where can  these tools be found? This superseeds previous message on same subject. thanks bluemustang

  • Rotate JPG or PNG

    Hello I'm doing a website and a i have to put some images imported from a file (by actionscript), the problem is that the images must be rotated, but when i rotate the images loses quality, for example the lines look like stairs lol. (sorry my bad En