Regarding non-unicode to unicode conversion in mapping
In our project we have Pi system which is installed as unicode system.
But the SAP systems at the sender side is unicode and most of them are non-unicode systems.
We have a doubt regarding the challenges that we need to face in PI mapping with reference to unicode and non unicode conversion.
Is it possible for us to Map the RFCs of non-unicode SAP system at sender side with the help of graphical mapping?
Any conversion we need to do?
Thanks & Regards,
sasi
Edited by: sasitharan on Jan 6, 2009 4:25 PM
Thanks a lot for your replys.
In our customer lanscape they have following SAP R/3 vsesions 4.0B,4.5B.4.6B,4.6C,ECC 5.0,ECC 6.0
so how this unicode , non unicode settings varies with respect to versions?
Is it resembles same with respect to all the version?
Thanks & Regards,
Sasi
Similar Messages
-
Transport request from non-unicode to unicode
Hi
In our BW landscape we have Development and Production server.
Unfortunately the development server was installed on BW 3.5 with NonUnicode
and production on BW 3.5 with UNICODE option..
We inderstand the architecture change, but we are using only ENGLIGH language in our envn.. Do we still need to do a unicode conversion on our development server ??
I understand that as long as I am using single language & single codepage, I will be needing a unicode conversion
Kindy let me know your feedback..
Thanks & Regards
MadhuHi,
We are having a running landscape of non-unicode system.
Now, Another Landscape is being used by parent company of Unicode Systems. Now, All data, programs, objects are being configured on the parent company server. So, there is no chance to migrate non-unicode to unicode.
But, We have to apply all packages developed on Non-unicode system to Unicode System. I have released that request and copied data file and cofile into target developement System (Unicode) then imported on this Server.
Now, we are facing this problem (Above mentioned.). I think, there must be a solution for it conceptually.
Regards
Dharmendra -
Importing from an Oracle database converted from non-unicode to unicode - SSIS 2012
Hi,
I've some SSIS 2012 pkgs that read from a non-unicode Oracle database to a non-unicode SQL Server database.
Few days later, the Oracle database will be converted to unicode one and so I need to update the SQL database and the SSIS pkgs. Obiously no data conversion transformations are present in the pkgs. I'd like to avoid to add more of these data conversions.
As a first step, I'm trying to convert a SQL table to unicode format, but it isn't possible to convert non-unicode and unicode string data types.
I did not expect to have an error about the conversion from to non-unicode Oracle database (not yet converted) to unicode SQL Server database: a such conversion doesn't lost any information content. For me, it is right to have an error by from unicode to
non-unicode conversion.
Any suggests to solve this issue with a minimum development effort? Many thanksNope once you change datatypes to unicode you've to refresh metadata settings within SSIS packages for it to work fine. SSIS doesnt have the ability to do metadata changes at runtime. So someone has to update package metadata information to make them unicode
to make sure it works correctly after the changes.
What you can do is create test dbs in oracle and sql in uncode and create some modified packages based on it. Once you make changes to production dbs you need to move these modified copies also to production after making necessary config value changes like
servername,dbname,folder paths etc and then they will continue to work normally without causing any further downtimes to the customer.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I want to read texts in a Unicode SolMan 7 sps20 system that were already saved in a non-Unicode SolMan 3.2 system. When, i tried to open docin solar01, i have a message :"No document opened". Any idea?!
Hi Puneet,
You can convert non-unicode single code page systems to unicode for all SAP Applications and SAP NetWeaver systems. Of SAP NetWeaver you can only convert SAP NetWeaver AS (ABAP) and SAP NetWeaver BI to unicode as all other SAP NetWeaver solutions are unicode only anyway. For the SAP Applications please note that only certain releases can be converted to unicode. For SAP R/3, you have to be at release SAP R/3 Enterprise extension set 2.00 before you can convert to unicode.
The other major restriction is that most but not all databases support unicode - the major exception being Informix.
Also it should be pointed out that you can do a conversion in place and therefore do not need to do an application migration (it is simply an export with conversion and a reload into the new database).
Al the requirements and conversion steps are covered in conversion guides found on the service marketplace. http://service.sap.com/unicode@sap -> Unicode Library -> Unicode Conversion Library
I hope this helps,
Mike. -
Re : The Migration of Non Unicode to Unicode System
What are the areas must be check once we shift from non Unicode to Unicode system
Hi,
check this threads and the links in it:
SAP Best Practice For Unicode Upgrades - NetWeaver 2004s
Regards
Andreas -
Transports from none Unicode to Unicode system. Possible?
Hello,
is it possible to transports from none Unicode to Unicode system?
Any experience?
Any links?
Best regards.Hi,
We ahve upgraded to unicode but never transporetd from non unicode to unicode...
Non unicode to unicode is ok but vice versa might be will not work.
reagrds
Gopal -
How to Perform Imperial to Metric Conversions in Mapping
Hi All,
I have the conversions in mapping from Imperial to Metric Conversions.( Ex: kg's to LB's and ect...)
Do i need to follow any standard conversion table or can i perform simply in mapping with calculations
How do i proceed for this, could you please suggest me in this
Regards
Vamsi>>Do i need to follow any standard conversion table or can i perform simply in mapping with calculations
I dont think there is any conversion table for this within XI.
You can just do in mapping with calculations.
Thanks
Aamir -
Non-Rac to Rac conversion using rconfig
hi all,
how to check whether Non-Rac to Rac conversion using rconfig has been completed sucessfully?
thanks.
Edited by: varun4dba on Nov 10, 2010 1:02 PMselect parallel
from V$instance;
-- run it on your any RAC instance. if YES then you have converted to RAC
http://oracleinstance.blogspot.com/2009/12/convert-single-instance-to-rac-instance.html
Check the above link also.
Regards
Asif Kabir -
If anyone can please help me, I would like to continue using iMessage on my laptop, but none of my new conversations exist only the older ones. I went into the iMessage preferences to delete my old number off the iMessage account and added my new number and email but I still don't get any new messages. Can somebody please tell me what I am doing wrong or how to change it further?
Please and thanks.If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
Non-unicode to Unicode conversion in ECC 6.0
hello friends,
WE have ECC 6.0 at our location , it was upgraded from 4.7 to Ecc 6.0, but it is in non-unicode format , just we have to convert that thing to unicode , for that we have seen that we can export the data from current non-unicode system by SAPINST and import that data to another ECC 6.0 unicode system by using SAPINST .
i bit confuised that which oprn from SAPINST i have to select to export the data and which option to be select from SAPINST to import the data so pls can anybody help me regarding the same.
Regards
Anil> Go for the exact document which u need. Code page
> 4100 is common for Unicode conversion....
4100? No - 4102 or 4103 are the correct ones - depending on processor and operating system (endianess). See
Note 552464 - What is Big Endian / Little Endian? What Endian do I have?
Markus -
Non-unicode to unicode conversion
Dear All,
We have non unciode systems in our landscape and we planned to do unicode conversion. I would like to know the support period for non unicode system by SAP. Does anyone knows about When will SAP drops their support for non unciode? , so that we will plan for unicode conversion accordingly. Any links ro refer ? Thanks in advance.
Regards
RajHi Raj,
1) as you can see from the link above, all new installations based on Netweaver 7.0 are supported as Unicode systems only.
2) There is an FAQ about this statement: Please have a look at
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000380759&_OBJECT=011000358700000045082008E
3) The usage of new technologies like JAVA integration and eSOA applications are only supported on Unicode systems. Please have a look at SAP notes 838402, 975768 and 1358929.
4) From my point of view, there is a high probability that the successing release of SAP Business Suite 7.0 will be Unicode only. However at the moment this is being discussed inside SAP and there is no outcome yet.
Best regards,
Nils Buerckel
Solution Management
Globalization Services
SAP AG -
Regarding non-unicode compatible fonts...
Hi Gurus,
Is there any way by which we can check whether the particular font is unicode compatible or not?Not necessarily in SAP,if i can find it out by anyother utility then also do let me know...
Thanks & Regards,
Ajitabh AggarwalCourier, times, times new roman are compatible on both uni-code and on non unicode sytems.. there is no way to find only we can check it by printing... this will not show any affer while printing text but it shows when printing list of amounts you may see the alignment varies...
All Cyrillics fonts are unicode compatablility...
Regards,
SaiRam -
Rman Error after non-unicode to unicode Conversion
Dear All,
I got the below error in SAP ECC 6.0 after converting to unicode version
I scheduled Redo log backup in DB13 with verify option.Redo log backup is successful but Rman verify fails( not connected to database) with the below error.
BR0002I BRARCHIVE 7.00 (44)
BR0006I Start of offline redo log processing: aecxcgeb.svd 2010-03-31 05.00.17
BR0484I BRARCHIVE log file: E:\oracle\HRD\saparch\aecxcgeb.svd
BR0477I Oracle pfile E:\oracle\HRD\102\database\initHRD.ora created from spfile E:\oracle\HRD\102\database\spfileHRD.ora
BR0101I Parameters
Name Value
oracle_sid HRD
oracle_home E:\oracle\HRD\102
oracle_profile E:\oracle\HRD\102\database\initHRD.ora
sapdata_home E:\oracle\HRD
sap_profile E:\oracle\HRD\102\database\inithrd.sap
backup_dev_type disk
archive_copy_dir E:\zz_backup\HRD
compress no
disk_copy_cmd copy
cpio_disk_flags -pdcu
archive_dupl_del only
system_info SAPServiceHRD QCHR1 Windows 5.2 Build 3790 Service Pack 2 AMD64
oracle_info HRD 10.2.0.2.0 8192 1399 12442755 QCHR1 UTF8 UTF8
sap_info 700 SAPHRD 0002LK0003HRD0011F01141457250015Maintenance_ORA
make_info NTAMD64 OCI_10201_SHARE Dec 14 2009
command_line brarchive -u / -jid LOG__20100326050000 -c force -p inithrd.sap -sd -w use_rmv
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.23
BR0008I Offline redo log processing for database instance: HRD
BR0009I BRARCHIVE action ID: aecxcgeb
BR0010I BRARCHIVE function ID: svd
BR0048I Archive function: save_delete
BR0011I 33 offline redo log files found for processing, total size 1439.778 MB
BR0112I Files will not be compressed
BR0130I Backup device type: disk
BR0106I Files will be saved on disk in directory: E:\zz_backup\HRD
BR0136I Verify option with value 'use_rmv' set - double work to do
BR1391I RMAN will be used for verification
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0202I Saving init_ora
BR0203I to E:\zz_backup\HRD\HRD ...
BR0202I Saving E:\oracle\HRD\102\database\inithrd.sap
BR0203I to E:\zz_backup\HRD\HRD ...
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.23
BR0198I Profiles saved successfully
BR0428W File E:\zz_backup\HRD\HRDARCHARC01366_0711116899.001 will be overwritten
BR0202I Saving E:\oracle\HRD\oraarch\HRDARCHARC01366_0711116899.001
BR0203I to E:\zz_backup\HRD\HRDARCHARC01366_0711116899.001 ...
#ARCHIVE.. E:\oracle\HRD\oraarch\HRDARCHARC01366_0711116899.001
#SAVED.... E:\zz_backup\HRD\HRDARCHARC01366_0711116899.001 #1/1
BR0428W File E:\oracle\HRD\sapreorg\HRDARCHARC01366_0711116899.001 will be overwritten
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.25
BR0351I Restoring E:\oracle\HRD\sapreorg\HRDARCHARC01366_0711116899.001
BR0355I from E:\zz_backup\HRD\HRDARCHARC01366_0711116899.001 ...
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.25
BR0568I Verifying E:\ZZ_BACKUP\HRD\HRDARCHARC01366_0711116899.001 using RMAN...
BR0278E Command output of 'E:\oracle\HRD\102\BIN\rman nocatalog':
Recovery Manager: Release 10.2.0.2.0 - Production on Wed Mar 31 05:00:28 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
RMAN> connect target *
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-12640: Authentication adapter initialization failed
RMAN> *end-of-file*
RMAN>
host command complete
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of catalog command at 03/31/2010 05:00:29
RMAN-06171: not connected to target database
RMAN> 2> 3>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of allocate command at 03/31/2010 05:00:29
RMAN-06171: not connected to target database
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of uncatalog command at 03/31/2010 05:00:29
RMAN-06171: not connected to target database
RMAN>
Recovery Manager complete.
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.29
BR0279E Return code from 'E:\oracle\HRD\102\BIN\rman nocatalog': 1
BR0536E RMAN call for database instance HRD failed
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.29
BR0587E Verification of archivelog file using RMAN failed
BR0570E Verification of backup of E:\oracle\HRD\oraarch\HRDARCHARC01366_0711116899.001 using RMAN failed due to previous errors
BR0016I 0 offline redo log files processed, total size 45.003 MB
BR0007I End of offline redo log processing: aecxcgeb.svd 2010-03-31 05.00.29
BR0280I BRARCHIVE time stamp: 2010-03-31 05.00.29
BR0005I BRARCHIVE terminated with errors
Please help on this
Thanks and Regards,
Vadivelan.NHi,
FInd the trans.log file content below after commenting in both the locations
4 ETW000 r3trans version 6.14 (release 700 - 03.11.09 - 14:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 01.04.2010 - 21:45:00
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Thu Apr 01 21:45:00 2010 0 0.000000
4 ETW000 [dev trc ,00000] db_con_init called 0 0.000000
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 0 0.000000
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 [dev trc ,00000] DlLoadLib success: LoadLibrary("dboraslib.dll"), hdl 0, addr 00000001887A0000
4 ETW000 3905 0.003905
4 ETW000 [dev trc ,00000] using "D:\usr\sap\HRD\SYS\exe\uc\NTAMD64\dboraslib.dll" 8 0.003913
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 9 0.003922
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll 11 0.003933
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.234) 177 0.004110
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll 10 0.004120
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll 17 0.004137
4 ETW000 [dev trc ,00000] New connection 0 created 18 0.004155
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 52 0.004207
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 14 0.004221
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse: 8 0.004229
4 ETW000 [dev trc ,00000] 000: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , hc = NO , perm = YES,
4 ETW000 reco = NO , frco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 22 0.004251
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or 255 0.004506
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 [dev trc ,00000] -->oci_init1 30 0.004536
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.2.0' 5667 0.010203
4 ETW000 [dev trc ,00000] Default connection: tnsname ='HRD' 14 0.010217
4 ETW000 [dev trc ,00000] -->oci_initialize(con_hdl=0, char='', nchar='') 12 0.010229
4 ETW000 [dev trc ,00000] application info callback registered 9 0.010238
4 ETW000 [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16) returned 0 (for default NLS handle)
4 ETW000 2149 0.012387
4 ETW000 [dev trc ,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con_hdl=0, ErrHp=000000000031BCB0)
4 ETW000 74 0.012461
4 ETW000 [dev trc ,00000] OCIHandleAlloc(OCI_HTYPE_ERROR, con_hdl=0, ErrBt=0000000000321478)
4 ETW000 20 0.012481
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 88 0.012569
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): connection handle 0 -> 'AMERICAN_AMERICA.UTF8'
4 ETW000 16 0.012585
4 ETW000 [dev trc ,00000] charset='', chset='UTF8', UNI_ASC=FALSE/FALSE 9 0.012594
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPHRD's password 9 0.012603
4 ETW000 [dev trc ,00000] Connecting as /@HRD on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
4 ETW000 18 0.012621
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.012637
4 ETW000 [dev trc ,00000] 0 UTF8 00000000076DF090 000000000031BCB0 0000000000321478
4 ETW000 17 0.012654
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 33 0.012687
4 ETW000 [dev trc ,00000] Allocating server context handle 13 0.012700
4 ETW000 [dev trc ,00000] Attaching to DB Server HRD (con_hdl=0,svchp=0000000000321338,srvhp=00000000076FE0E8)
4 ETW000 43 0.012743
4 ETW000 [dev trc ,00000] Assigning server context 00000000076FE0E8 to service context 0000000000321338
4 ETW000 9179 0.021922
4 ETW000 [dev trc ,00000] Allocating user session handle 34 0.021956
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr='/',svchp=0000000000321338, srvhp=00000000076FE0E8, usrhp=000000000031C4C8)
4 ETW000 23 0.021979
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 26181 0.048160
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 75 0.048235
4 ETW000 [dev trc ,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 26 0.048261
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017' 27 0.048288
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1017 18 0.048306
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1017) 20 0.048326
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1017 35 0.048361
4 ETW000 [dev trc ,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 16 0.048377
4 ETW000 [dev trc ,00000] Try to connect with default password 9 0.048386
4 ETW000 [dev trc ,00000] Connecting as SAPHRD/<pwd>@HRD on connection 0 (nls_hdl 0) ... (dbsl 700 251109)
4 ETW000 54 0.048440
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet EnvHp ErrHp ErrHpBatch
4 ETW000 15 0.048455
4 ETW000 [dev trc ,00000] 0 UTF8 00000000076DF090 000000000031BCB0 0000000000321478
4 ETW000 17 0.048472
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0, usrhp=000000000031C4C8
4 ETW000 13 0.048485
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0, usrhp=000000000031C4C8
4 ETW000 20 0.048505
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPHRD/<pwd>, svchp=0000000000321338, srvhp=00000000076FE0E8, usrhp=000000000031C4C8)
4 ETW000 20 0.048525
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with -1=OCI_ERROR 2398 0.050923
4 ETW000 [dev trc ,00000] OCISessionBegin(OCI_DEFAULT) failed with SQL error 1017: 61 0.050984
4 ETW000 [dev trc ,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 25 0.051009
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017' 17 0.051026
4 ETW000 [dev trc ,00000] set_ocica() -> SQL error code 1017 13 0.051039
4 ETW000 [dev trc ,00000] -->oci_get_errmsg (con_hdl=0, rc=1017) 14 0.051053
4 ETW000 [dev trc ,00000] OCIErrorGet -> SQL error code: 1017 55 0.051108
4 ETW000 [dev trc ,00000] ORA-01017: invalid username/password; logon denied
4 ETW000 29 0.051137
4 ETW000 [dblink ,00433] ***LOG BY2=>sql error 1017 performing CON [dblink#8 @ 433] 32 0.051169
4 ETW000 [dblink ,00433] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#8 @ 433]
4 ETW000 14 0.051183
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'HRD'" -
Problem publishing database contents from non-unicode to unicode system
Hello everyone!
We just set up a new SAP WAS based on Netweaver 2004 as a unicode system. Out problem now is that we have a content management system on our non-unicode system and that we are publishing the contents via rfc to the WAS unicode system to display the contents online. the contents are stored in our own database tables.
The problem thereby is that many texts pasted from microsoft word contain special characters like bullets, long minus or low-9 quotation marks which are not correctly displayed in the unicode system / on the website. we already found out that it has something to do with the codepage. the sap notes say we should use 1160 instead of 1100 and that the transaction SPUMG would be helpful. but we are not able to select any tables there.
so now we do not know what to do exactly. do we have to change something in our non-unicode system or do we have to conversion in our unicode system. and what happends if content containing special microsoft word characters is published after the spumg conversion? do we have to to this frequently?
We would be glad if anyone could help.
Thanks a lot!Hi Martin,
thanks for your quick answer.
You got me right. We have a local non-Unicode SAP HCM Netweaver 2004 system running a self-developed web based content management system / wiki. The texts entered in the bsp application are stored in a string field in our database table. Actually we publish the contents to a WAS 6.20 non-Unicode system with the same database tables to provide the content via BSP for the public. Everything is working fine including the special characters.
Now we want to replace the WAS 6.20 non-Unicode system by a new WAS 7.0/2004 Unicode system. But when publishing the contents via the same RFC function module to the new system the special characters seem to be damaged. We are not able to replace them with abap commands and when they are displayed on the website we only see "boxes".
If I get you right we have to run SPUMG on our nw 2004 non-unicode productive hcm system, right? but isn't there a danger to damage existing contents?
Best regards,
Stefan -
Kernel change for Non Unicode to Unicode
Hi All,
Is it ncessary to change the Non-Unicode Kernel to Unicode Kernel before before starting the Export for Unicode Conversion?
Regards,
AmitHi
Is it ncessary to change the Non-Unicode Kernel to Unicode Kernel before before starting the Export for Unicode Conversion?
No
Niel has made every thing clear
Regards
Uday
Maybe you are looking for
-
I need help in finding out home to combine songs from the same CD into one Album. When putting CD into the iMac, it auto loads into iTunes. If the artist is singing duet and the songs show more than one artist, it gets separated in iTunes. I want to
-
Family Sharing on the Apple TV 3
I Have multiple apple products, of which are some apple tv's. until a few days ago all the devices were using the same Apple ID which was mine. We recently decided to use separate Apple id's for our family members, and using family sharing among the
-
Is there any way to speed up a voicemail message once you've slowed it down?
On voicemail playback you can slow the voicemail down by selecting 4 while it's playing. I've yet to find a way to speed it back up. Is there any way to do this? We have CUC 9.0. Thanks
-
My 1yearold 160gb ipod isn't being recognised by itunes
basicly whats happe is that when i connect it to my pc itunes isnt recognising my ipod and windows is saying the disk needs to beformated. its still playing music but the menu takes for ever to load and it takes 10 to 15 seconds to register me pressi
-
Firefox 4 = crap. How do I uninstall it? Or do I need to just use Chrome?
Firefox 4 is absolute crap. What am I, beta testing it for Mozilla? I want to uninstall it. Please let me know how to go back to a previous version or I'll just start using Chrome. The new reload button location sucks, half the features on my $120 mo