Regarding non updating of E62 firmware via NSU.

As per nokia website,The E62 has the following firmware that can be installed to the phone.
E62 RM-88 2006-09-11 2.0618.06.17 AMERICAS
E62 RM-88 2006-10-23 2.0618.06.17 APAC
E62 RM-88 2007-01-26 2.0618.06.17 APAC EMEA
E62 RM-88 2007-04-19 2.0618.06.17 AMERICAS
E62 RM-88 2007-05-21 2.0618.06.17 EMEA
E62 RM-88 2007-07-16 3.0633.09.13 AMERICAS
E62 RM-88 2007-07-17 3.0633.09.13 EMEA
E62 RM-88 2008-01-29 3.0633.31.19 EMEA
E62 RM-88 2008-06-27 2.0618.06.17 AMERICAS
E62 RM-88 2008-08-11 3.0633.09.13 AMERICAS
Any idea then why cant we update the firmware via the NSU for the E62, as the NSU does not accept to update the E62???

there are phones listed that NSU supports if your phone is not listed there is no way you can update your phone's firmware/software unless you goto the nearest nokia care point
i think 1200 is not supported...
check it out here-> http://europe.nokia.com/A4176089

Similar Messages

  • Updating Pioneer 111D firmware VIA external USB connection

    Hi all
    I have a Pioneer 111D that I would like to update it's firmware from 1.16 to 1.29(?) but since
    Pioneer doesn't do any firmware programs for Macs I would like to use my new MacBook (intel)
    Bootcamp and do the update with a NewerTech USB 2.0 Universal Drive Adapter (http://www.newertech.com/products/usb2_adapt.php) but I'm not sure if it can be done via USB or it
    has to be an internal connection. Any help with this would be very welcomed!!!!
    Thanks!!!!

    I don't think usb firmware update will work. you could pull the optical and take it to a small pc shop and have them flash it for you.
    or try here:
    http://flashman.rpc1.org/Firmware/PIONEER/DVR-111/
    Message was edited by: Smokerz

  • No one has updated 5800 to v50 via NSU...!!

    i updated my 5800 to v50 via OTA. Then i tried to update via NSU which failed. I tried to update my friend's 5800 via NSU which again failed.(i used a different pc) i think the problem is with nokia servers. BTW battery life is very poor in v50.

    so it proves dt the problem is with nokia. im wondering why nokia is not fixing it. aw thnx
    I did not say that the problem is more often than not with the user .Or the PC settings .
    battery lfe some are reporting poor batery life probably cured by hard reset .
     jje

  • Nokia 1200 firmware update via NSU

    Lets say if i already have Nokia 1200 data cable..
    Can i update its firmware via NSU?
    Can NSU detect the phone?
    Message Edited by mono_demon on 27-May-2008 07:59 AM

    No, the 1200 is too basic to be supported by the NSU. None of the budget 1xxx or 2xxx models can be updated in this way.
    It can only be updated at a nokia care point.
    Care points/service centres and repair info:
    UK • Europe • Asia-Pacific • USA •
    Canada • Middle East and Africa
    Elsewhere: Click here, select your country, go to the support section, then select repair.

  • What is defference between updating Firmware via P...

    I'm N85 user and I want to know What is defference between updating Firmware via PC an Via Device manager on phone?

    Firmware updates are usually released via one method or the other, rarely via both.
    The NSU method downloads entire ROM images from Nokia's servers, resulting in downloads of more than 100MB in some cases.
    The FOTA method only downloads what has changed from the version running on your phone to the latest version available. This means much less data to download, usually around 4-6 megabytes, which is important if you don't have access to a wireless network and have to use your operator's packet data service.
    The FOTA method is safer (because it doesn't involve a computer running a notoriously flaky operating system) and faster (because there's less data to download).
    Otherwise, the end result is the same.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Problem for update firmware via FOTA (N79)

    hi friends
    i have N79, firmware v31.002 , i have come to know that new firmware v31.101 is out for nokia n79,
    i tried to update firmware via FOTA, it shows "server not responding", i thought server might be busy at that time,
    but i tried for two days it shows the same reply, i dont know whether my phone has any problem with that,
    pls help me
    thanks/regards

    v31.002 is the latest version available till now in India for N79, I just checked, so no hurry at all.
    regarding server not responding you may check options -> settings after *#0000# & it should have nokia as selected profile.

  • N73 Failed To Update Firmware Via PC

    i've tried using pc to update my n73 firmware but it'll stop updating when it reach 53.3mb. i've been repeating to update dozens of times but it ended with the same problem. can't even find solutions in the internet. any ideas? thank in advance

    at last, my n73 was succesfully updated after keep on trying for 8 hrs. thanks

  • 5800 (NAM RM-428) v40 available via NSU

    Saw the other thread which indicated that v40 was available via FOTA.
    Now v40.2.005 for 5800 XpressMusic (NAM RM-428, product code: 0577454) is available via NSU as well.  132MB download went quite smoothly.
    Firmware is dated Mar 17, 2010 & I'm not sure when it became available via NSU...I haven't been checking lately.  Even though I've registered with Nokia for updates, I never actually get email when an update is available.  I do get their occasional "newsletter" email though.
    Lumia 920, Lumia 800
    Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
    Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

    Howdy.
    Phones in US apparently don't get shipped with a server configuration for software updates, which is weird.  Call Nokia support to see if they will give you the configuration.  I tried the info that's posted on these forums (search for server update).
    What I do is use NSU, which stands for Nokia Software Updater, a package you have to install on your PC.  Do you have either PC Suite or Ovi Suite installed?  If so you NSU should have been installed.  Connect your phone and run that.  Heed the warnings about making backups before updating!
    [Update]
    Saw in another thread that you may be using a Mac? In that case I don't know about NSU availability on the Mac.  In case you're in an area where there's a Nokia Care Center (I believe that's only NYC and Chicago in the US, though I haven't checked lately), then you could go to them & have it updated, or find a PC where you can install NSU for updating your phone.
    You might want to put your phone model and firmware in your signature so people can tell which 5800 you've got.  Also if it's T-mobile branded, you may want to check with them about the update.  My phone was unbranded and v40 is available via NSU.  I'm now looking forward to v50.
    Lumia 920, Lumia 800
    Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
    Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

  • HT4759 I have performed all troubleshoot suggestions to make my iphone and PC calendar update to each other via icloud.What else can I do to resolve this? This has been the most frustrationg aspect of changing to iphone and ipad. Thanks.

    I have performed all troubleshoot suggestions to make my iphone and PC calendar update to each other via icloud.What else can I do to resolve this? This has been the most frustrationg aspect of changing to iphone and ipad. Thanks.

    Welcome to the Apple Community.
        1.    First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
        2.    Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
        3.    If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

  • HT3706 Can't update the EFI firmware.

    When trying to update the EFI firmware, I get the message: 'This computer does not need this update.' even though my firmware is out of date.
    My firmware version is:
    Model Name:          Mac mini
      Model Identifier:          Macmini3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.26 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MM31.00AD.B00
      SMC Version (system):          1.35f1
      Serial Number (system):          YM9381HS9G5
      Hardware UUID:          4366F0EE-B742-5F78-B3C2-01C6D0DAD36F
    and Apple recomends:
    Mac mini (Early 2009)
    Macmini3,1
    MM31.0081.B06 (EFI 1.2)
    Is the 00AD part of the version number in Hexadecimal? in which case it is a higher version and does not need the update.
    The reasons for my confusion is that I'm trying to install new memory modules, which are either failing due to incompatability or due to firmware versions, so I'm simply trying to rule something out....
    Thanks

    Thanks,
    Was just double checking, before I returned perfectly compatible RAM.
    The RAM I tried was indeed "PC8500 DDR3 1066MHz 204 Pin", but I guess there are more subtleties than that...
    So, for anyone wishing to avoid my problems, then it was:-
    Kingston RAM
    Part No: M51264H70
    and this was the most info I could glean about them:-
    Speed: DDR3-1066 / PC3-8500
    Technology: DDR3 SDRAM
    ECC: No
    Unbuffered
    Voltage: 1.5V
    Form Factor: 204-pin SO-DIMM
    None of the above conflicts with what apple recommend.
    I had located the Crucial ones before posting, so I'll probably go with them as they are based in the UK.
    Thanks
    Andy

  • Update and transfer data via BADI LE_SHP_TAB_CUST_HEAD

    Greetings All,
    I've a requirement to create a custom tab in the VL01N/VL02N/VL03N header record displaying custom fields.
    I've successfully implemented BADI LE_SHP_TAB_CUST_HEAD, created a subscreen, appended my custom fields to the LIKP table via append structure, and can now view my fields in the transactions listed above.
    I'm having trouble updating the fields in the subscreen and save the values back to the LIKP table.  First question is a) do I do this via the PBO PAI modules in my subscreen, or should I be doing this in the BADI?
    Second question is, if I shuodl be doing this in the BADI, how do I do it.  A simple example is that I have created a field called ZZ_CUST_TIME in LIKP, added it to my sub-screen using data dictionary linking.
    How do I pass a value entered into this field via VL02N back to the transaction for update?
    Any suggestions would be greatfully appreciated.
    Regards,
    Steve

    Dear Abhishek,  can you explain the step..in this step screen is comming but custom fields value is not coming and also likp table is not updated
    Correct AnswerRe: Update and transfer data via BADI LE_SHP_TAB_CUST_HEAD
    Abhisek Biswas Jan 21, 2009 7:28 AM (in response to Stephen Keam)
    Hi Stephen,
    You can do it by using PBO and PAI modules of the screen that you created. But you have to transfer the data from subscreen to the BADI method TRANSFER_DATA_FROM_SUBSCREEN and aslo from method TRANSFER_DATA_TO_SUBSCREEN to the subscreen. This will update the screen field data to LIKP.
    You can aceive this by two ways.
    1) You can use EXPORT in method TRANSFER_DATA_TO_SUBSCREEN and then IMPORT the value in the screen PBO. And You can EXPORT data from screen PAI and IMPORT data in method TRANSFER_DATA_FROM_SUBSCREEN.
    2) Anither way to do it is by using Function modules and Function Group instead of EXPORT/IMPORT.
    Create a Function group. In the global data define a structure/Work Area of type LIKP.
    DATA w_likp TYPE likp.
    Then create two Function modules, one to export data and another to import data.
    Let us assume that the export FM takes in IS_LIKP as input and the import FM outputs the value of LIKP into ES_LIKP.
    Then pass the value is_likp to the export FM in the BADI method TRANSFER_DATA_TO_SUBSCREEN and in the screen PAI pass the LIKP data to the export FM.
    In the export Function module write the following code:
    MOVE is_likp TO w_likp
    Then in the Import FM write the following code:
    MOVE w_likp TO es_likp.
    The import FM is called from method TRANSFER_DATA_FROM_SUBSCREEN and from screen PBO.
    This will solve your problem.
    Regards,
    Abhisek.
    Alert Moderator
    Like (0)
    Reply

  • The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do?

    The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.

    dear friends
    im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
    my internet connection is perfectly ok here. can anybody help me on this?
    Thank you

  • How to update N73ME's firmware?

    hi,
    I'm getting N73 ME next week.it will be my first symbian phone.
    please tell me how to update firmware via pc?
    i never updated firmware of my 6131 so i don't know how to do it.
    after update will the phone be the same as before?
    i mean will all function and software run properly?
    if not tell me how to make every program & application run properly & what measures i will have to take?
    which apps & files i need to copy to my pc before update?
    what probable problem i might face after update?
    to make an absolute perfect(!) firmware update what should i do?
    i'm totally ignorant about firmware update,please be as elaborate as possible in your reply...
    please.........
    editlease be elaborate...

    No. Firmware updates have to done on the platform for which the iPod is formatted.
    Version 1.2.1 of the iPod software is contained in iTunes in any event.

  • Non-updated Idocs found in Business Information Warehouse

    Hi,
    I got the following error while trying to load data:
    "Non-updated Idocs found in Business Information Warehouse
    Diagnosis     
    IDocs were found in the ALE inbox for Business Information Warehouse that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually. "
    Please help me solve this issue.

    Hi,
    Actually i tried all these options. I updated the idoc manually, and now the following message comes :
    "Request still running
    Diagnosis
    No errors found. The current process has probably not finished yet.
    System Response
    The ALE inbox of BI is identical to the ALE outbox of the source system
    or
    the maximum wait time for this request has not yet been exceeded
    or
    the background job has not yet finished in the source system.
    Current status
    Data packets were found that have not yet been rea "
    And the process is on for the past 5hours. Can i do something regarding this?

  • Is possible to update a custom picklist via an entity's WebServices?

    Hello,
    I would like to know if it is possible update a cutom picklist via an entity's Web Services, for exemple from Product WS? If so, what procedure/functions will I need?
    Thank you and regards.

    Hi Monica,
    If you intent to add new values to the picklist, then you cannot use any of the entity WS for this reason
    If you want to update/change the value of a picklist field example Status from Open to Closed then the entity WS can be used.
    For the first case you can use UpdatePicklist Operation under the Service API >> Picklist WSDL
    Hope this helps
    Regards,
    Deepak H Andeli

Maybe you are looking for