Regarding Notes Plus

Regarding Notes the app, I had over 30 notes and they all dissapeared? I have no idea what happend to them? Can anybody heló me?

I would recommend contacting the developer as he may be able to help (I have gotten in touch with him a few times and it has helped me). Anyways, have you checked trash? I am assuming it is a problem with your database file which the dev may be able to restore. Again, contact him here.

Similar Messages

  • Regarding not being able to make an in-app purchase: all it says is that i can't make In-app purchases at this time.

    regarding not being able to make an in-app purchase: all it says is that i can't make In-app purchases at this time. Any suggestions? I'm new to the apple world. I just switched from an Android today.

    Contact iTunes store support for this. Go to http://www.apple.com/support/itunes/contact/ and click the blue link next to the green shopping bag. Follow the steps and send them an email explaining your issue.

  • Can you print from the ADF with Officejet Pro 8600 (not plus) & how to print checks in correct order

    Client has Officejet Pro 8600 I(not plus) They want to print payroll checks out of QuickBooks but when they put the checks in tray 1, it pulls the check that is on the top, which happens to be the last check # in the stack.  Is there a way to print where the printer pulls from the bottom of the check stack as opposed to the top. I've looked and can't seem to find the answer. QuickBooks says we should check with HP and change something in the print drivers?
    So I thought it would fix it if they printed the checks from the ADF where I thought I could control if it pulls from the front or back of the stack. When we tried to print from the ADF, it pulled from Tray 1 and we weren't given the option to print from the ADF.   (only Tray 1 & 2...which they don't have the 2nd tray anyway) So does this model, not being the PLUS model, not allow you to print from the ADF. (only scan, copy and fax from the adf?)
    If we can't use the ADF for check printing, then how can we get the checks to print in the correct order.  Meaning, the 1st check # to print should be on the check that is on the bottom of that check stack in Tray 1.  Otherwise they have to count out the exact number of checks & place them in the tray.  Or reverse all of them which is not an efficient either! I hope this makes sense.

    Hi @kceacct ,
    I see that you would like to know how to print out the checks in order. I will do my best to help you.
    The ADF can be used for copying, scanning and faxing.
    From the print driver you can only select the tray that you want to print from.
    Changing Print Settings in Windows 8.
    You would have to load the checks in order from top to bottom in the paper tray, since the printer just pulls the paper in from the top of the stack of paper.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Recovering content from stolen iPad - Notes Plus

    Hello - trying to  find out how I can get to the backup of my stolen iPad. Can I avoid erasing my replacement to get to the old content in Notes Plus? Or can I get at the stolen iPad's backup via my laptop?
    Cheers!
    James

    If you did the backup of your notes before deleting then you can easily get back those notes by the following steps:
    1. First don’t connect your iPad directly to computer because the iTunes only saves the most recent backup
    2. Now make sure that you have a valid backup as listed iTunes> preferences> devices
    3. Before connecting your iPad make sure to check iTunes>preferences> devices “prevent iPad from syncing automatically.” Because this will ensures we don’t erase the previously stored backup. Then select “OK” and close the window after checking “don’t sync”
    4. Now connect your iPad to your computer.
    5. Select the iPad as seen in the left bar of iTunes, as listed under the devices.
    6. Select version and click on restore from options.
    7. It takes a while to for iPad to erase itself, reset and restart.
    8. After the iPad is restart you will see Set Up Your iPad in iTunes on your computer, and now just click the restore from the backup and click continue. It will take 10 to 12 minutes to recover your deleted notes on iPad, photos, music, videos, etc.

  • I have questions regarding notes section , like how I write notes and they end up my my wife's phone !!!!!!

    I have questions regarding notes section , like how I write notes and they end up my my wife's phone !!!!!!

    Yes, as Josh P said, I can see that happening if you sync with iTunes on the same Computer and the same mail account.  Under the info section, advanced, I bet notes is checked for both of the devices..everything else might be un-checked, but notes might be checked for both devices...

  • HT1212 where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    You use iTunes and restore the phone from Recovery Mode. You will lose all content. http://support.apple.com/kb/HT1808

  • How can I get the Notes Plus app?

    I am trying to get Notes Plus app as part of the IOS 6. Do I still need to buy this app?

    Hi Notes plus is not the best app to take notes, have a look on this App it's an amasing smart taking notes and task manger app : http://www.beesapps.com/iPad-Management-Beesy/
    <Poster may receive some form of compensation, financial or otherwise, from recommendation or link.>
    <Edited by host>

  • Zen Nano 1GB (not plus) not playing DRM audio bo

    Okay. So I've read very similar problems here, but none quite like mine. I've read through my manual (actually, I only have the downloaded manuals, and there doesn't seem to be one for a Zen Nano GB... It's not a Plus and it's not a Nano 52MB).
    My whole reason for purchasing my Nano was b/c it can play DRM audio files & I want to listen to audio book downloads.
    In any case, I know not to drop and drag my DRM files, that won't work.
    I got a (refurbished, works fine) Zen Nano GB a few weeks go. If I drag and drop regular mp3 or WMA audio files, they work fine. If I sync regular song files with WMP, they work fine.
    It's the DRM files I'm having problems with. I tried sync-ing with WMP , (after opening the DRM file and obtaining the license (these are audio books from NetLibrary.com, and I've followed their instructions as well as those for the Nano). Once I've obtained the license, I sync. The audio book appears on the Nano, but will not play.
    I tried updating (or, perhaps it was downgrading) the firmware, and then used WMP 9 to sync, and managed to get one audio book to play. I thought I was ready to go. It was awesome. The whole book played and I enjoyed it.... but... once I finished the book, and re-synced and tried to add a new book.... nothing.
    I've re-installed various versions of firmware, tried on WMP and WMP 9 AND tried using Creative's own software to sync (after opening the files in WMP and obtaining the license)... Nothing. Lots of wasted time, tho.
    I'm not quite a newbie with mp3 players or computers, but I am capable of "missing" something.
    Thanks in advance for any help you can provide & please let me know if I forgot anything specific that could aid in any solutions,
    MomLikesMusic (and audio books!)

    To "downgrade" firmware (I don't have any idea if that's what it's really called, it's certainly not an upgrade!):
    Through another posting on this message board, I found a link to this site:
    http://dapjukebox.altervista.org/mod...ownload&cid=85
    which has other firmware versions available (some are still on the Creative downloads page as well, but the oldest ones are not). The site seems to be in Italian (?).
    I downloaded and saved (and virus-scanned) the firmware of _0_02.
    Then, I followed the installation instructions from another firmware download from Creative:
    "To install this firmware, do the following:
    1. Download the [_0_02] file into your local hard disk.
    2. Make sure your player is connected to your computer.
    3. Double-click the downloaded file.
    4. If you are prompted to reset your player, click OK.
    5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
    6. When the firmware download dialog box appears, click Start and follow the instructions on the screen."
    Because I had nothing on my player, I didn't have anything to lose, data-wise. And it worked. One of these days I may try to upgraded the firmware to see if I can still transfer...
    I saved a few other firmware downloads (updates) to try in the future -- rather than go hunting for them again.
    Please note, the Nano I have isn't listed in the Creative products -- the one I have says Creative Zen Nano GB on it; no where can I find such a thing. Since it's a factory refirbished model I bought off e-bay, I suspected older firmware may work on it... If you have a newer model, it may not work. I'm not an expert (this whole MP3 stuff still boggles my 37-year-old mind sometimes), so be careful what you do to your player!
    Good luck,
    ~MomLikesMusic

  • Problem regarding note 493472  and 362552

    Hello All,
    I was getting dump for transaction IQ09 ---> "STORAGE_PARAMETERS_WRONG_SET".
    I searched in net and found note 493472 (Problems with performance / memory in IQ09) is useful for it.
    But after downloading this note by transaction SNOTE, I am getting the status "cannot be implemented".
    Can you please let me know the reason behind it.The same problem exists for note 362552.
    And also let me know if there are any other alternative OSS notes for this problem.
    Regards
    Arindam

    Hi,
    First check in sap service market service.sap.com if the note can be implemented,,
    For this, First check the Release, Support Pack(In menu->system->Status)..
    If the sap note is valid for that release and support pack(already implemented) given there...Then the note is valid..
    Also manually check if the prerequistis exist and are to be implemented...
    Hope this helps you
    regards
    shiva

  • Regarding NOT BOUND error in Zfield

    Hi All,
    I am  new to CRM WEBClient  IC.
    I have created a Zfield using AET tool and  added in Interaction center Identify Account screen but
    I am gettting a NOT BOUND for that  Zfield .
    Could anyone help me track the reason and how to solve this error?
    Regards,
    Swaraj

    Hi Steve,
    Thanks for your reply.
    As u said i posted the same question in Interaction center.
    Please could you give me the description in detail .
    Regards,
    Swaraj

  • Question regarding note 1338777

    Hi,
    We are currently implementing support stacks, and one of the notes to be implemented for Controlling is 1338777.  This note specifies that it is necessary to implement a number of text elements against ten different reports, however it neglects to specify just what these text elements need to be.  The correction instructions contain program code updates, but just an empty list of text elements.
    The programs affected are:
    RKPT4KP97
    RKPT4KP98
    RKPT4CP97
    RKPT4CP98
    RKPT4KO14
    RKPT4KO15
    RKPT4CJ9B
    RKPT4CJ9BS
    RKPT4CJ9C
    RKPT4CJ9CS
    I've already done some searching, and I've been unable to determine exactly what needs to be updated.  Has anybody else implemented this note or the support pack that contains it, and if so, would you be able to point me in the right direction to find out what I need to do?

    HI,
    yes there is new version for this note (version 4 valid from 12.02.2010) which contains the following information:
    Language DE:
    SYM       TEXT
    064       Kosten
    065       Kreiswährung
    066       Objektwährung
    067       Transaktionswährung
    068       Tarife
    069       Währungen
    The translation in language EN (which is not available as the new SAPNET note version is only available in language DE):
    SYM       TEXT
    064       Cost
    065       CO-Area currency
    066       Object currency
    067       Transaction currency
    068       Act. rates
    069       Currencies
    Best regards, Christian

  • Regarding not activation of transfer rules

    hi sdn,
    I generated a generic datasource the fields from r/3 are:-vbeln,erdat,netwr,waerk. when i wanted to activate the transfer rules and transfer structure then this error comes :-
    <b>Transfer structure ZNAINDS_HA does not exist
    Message no. RSAR440</b>
    the info object i'm using
    0doc_number
    0createdon
    onet_val_hd
    0doc_currcy
    when i cheked in service.sap.com then they are saying install support pak 4 for 3.5
    but we are already using sp 17 for 3.5
    can u tell me what is the problem is
    i already
    replicated the datasource.
    mapping is done correcctly in transfer rules
    wat to do pls guide me
    <b>points promised</b>

    Hi Rubane
    Please check following
    1. Check on your R/3 source system first RSA1-> Source system-> right click on your R/3 system and Check
    2. try Restore in same menuu for your R/3 system
    3. Replicate the datasource
    4. Now manually activate the transfer rules
    5. still if it is a problem then in SE38 tcode run the program RS_TRANSTRU_ACTIVATE_ALL
    Regards
    Pradip
    Sunil Tayade alias sunraj: How are you doing?
    Program name is program RS_TRANSTRU_ACTIVATE_ALL

  • Regarding Pantone Plus Colors

    Is it possible to manually remove the Pantone Plus .acb files from the Color Books folder and replace them w/the Pantone Palette Back up files so I can open an old file and save for someone who doesnt have the Plus loaded w/o damaging my CS5 Illustrator program?

    Try this:  Applications > Adobe Illustrator > Presets > Swatch Libraries; delete the existing Pantone+ variants and then look for the old version: Applications > Pantone Palette Backup; move them back to the Illustrator Presets > Swatch Libraries folder.  I just read the info in the back of "PlusLibrariesWhitePaper1_11.pdf"  Illustrator is the only application that will not have a data point of two different swatch libraries because of the confusion it generates.  I hope this helps, let me know if it works and you can replace the replacements.  There is no uninstaller because I think it is just a matter of deleting the .acb files manually.

  • New Diamond Bios. Not Plus...

    BIOS Type Award® BIOS   File Sizes 383KB
      Version  1.A   Update date 2006-4-11
      Update Description - Add safety recover function to revert BIOS into default setting when system unable to boot due to overclocking.
    To enable the function please press the reset button or power button 3 times.
    - Support NVIDIA 7900X2 PCI-E VGA card.  
    Not sure yet what has changed but  you can find it here; http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=638&kind=1
    Take care not to flash a Bios just because a new one is out. Flash only if you know it fixes a given problem as a failed flash can ruin your day and your board.
    I can not say as yet what has changed but I am sure some folks will get that sorted soon. So wait if your unsure of flashing. As always.

    Quote from: Tiresmoke on 26-March-06, 08:42:47
    We don't advocate flashing Bios's for no reason whatever. This is not like a driver in Windows for your vid card. Have a problem while flashing a bios and say goodbye to your MB.
    I agree with you, but some times the trill of it is just too great.
    Not to mention the increased speed posibilities 
    Has anyone tried the IOSS BIOS Savior?
    The SST 49LF004A /3.3V is only listed on the site, the Diamond Plus I have has 49LF004B.
    The Diamond Plus markings off the chip are:
    SST-49LF004B-33-4C-NH-0551003-C
    I am only 18 hrs thru a 40+ hrs re-encode of 80 gigs, don't really wish to verify the boot loader BIOS.
    Can somone please verify that the Flash reads:
    SST 49LF004B /3.3V
    and if "FWH" is also on the ID?
    I'm hoping the RD1 - 8X/PMC4 will work. Feel $25 is well worth the peace of mind 
    Sent off an request for verification, if allowed, I'll post reply.
    enjoy
    PS, Not that I've ever killed a BIOS 
    I also wont mention how a burnt squirrel on a power line can "affect" a flash with NO UPS 
    Be safe, feed your 'puter safe power and save your sanity 

  • Regarding BRF plus

    Hi,
    We are trying to implement the BRF Plus in our company.And generate the webservice.
    We are able to create POC's and created webservices.
    But rule set can be achieved by BRF plus only with the person who is familiar with programming and not by end-user.It might be bit difficult for them.
    Is there any way end-user can use BRF-Plus to write their own rules(if not with BRF plus with other SAP technologies)???
    Cheers - Anna.

    Hi Carsten,
    Thanks for the reply.
    Our system is in the package EHP4 FOR SAP ERP 6.0 / NW7.01.Whether this is ok to start our developments for BRF+?
    And with the current package,I am trying to find the difference between two dates and trying to store in the temporary variable(same type of source),I get an error 'Required calculation is not possible with these operands (Details) Display Longtext'.
    Since we need to execute for large customer volume,so all our select we are using in the program,and calling the BRF+ in the runtime.Whether it is possible to pass the values  from the program to BRF + using the component ID?
    If we are using the component ID in development,if transportng to production then the ID will change,whether we can change the ID dynamically in program?
    Sorry to bother you with so many queries.
    Thanks in Advance.
    Annamalai.

Maybe you are looking for