Regarding offset nulling for strain channels

hi everyone,
i am using 'quarter bridge 1' configuration for the measurement of starain channels.
Is any one knows, how many strain channels can be nulled together in one shot.
And if at all nulled together, how to retrive the erroroneous channels (open channels i.e the bridges which dont have an active arm).
thank you

Hi maheshyt,
Can I ask what modules you are using?
If this is known it should be simple to find a manual/datasheet that will hopefully contain some, if not all, the information you need.
Kind Regards
Michael
NIUK Application Engineer

Similar Messages

Getting Error!! Could not deliver the output for Delivery channel:null

Hi All,
I have an XML Bursting program wherein I have given the output type as pdf.
But as soon as I change the output type to Excel, I get the error - Error!! Could not deliver the output for Delivery channel:null
Can anyone please advise me what could be the possible reason for this Error and how can I resolve the same.
Regards,
Shruti

Hi,
I am facing the same situation and want the bursting program to finish in normal even when there is no data.
Can you please let me know how you resolved this?
Thanks
RG

Bursting error: Could not deliver the output for Delivery channel:null'

I am using R12 applications.
I get this error 'Error!! Could not deliver the output for Delivery channel:null' in the output file of the bursting concurrent program.
The smtp server name the ids the mail id and all other things are fine in the bursting file since i have hard coded them.
I have also telnet <smtp server name> 25 frm command prompt and it worked fine.
I don't know why i am facing this issue.
Below is the bursting control file.
<?xml version="1.0" encoding="ISO-8859-1" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXOTC_MER_ROLES_LIST/LIST_G_USER_ID_/G_USER_ID_">
<xapi:delivery>
<xapi:email server="smtp server name" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected]" attachment="true" subject=" Dear Manager :">
Please review the attached list of roles </xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output-type="Excel" delivery="123">
<xapi:template type="rtf" location="/mlogs/BPTDEV1/conc/temp/XXOTC_MER_ROLES_LIST_3.rtf">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Any help would be greatly appreciated

Hi user13319084,
Is it that you've enabled SMTP authentication and the authentication is failing (not sure if user13319084 is person Kaushek commenting the same on my blog) here:
http://garethroberts.blogspot.com/2008/03/bi-publisher-ebs-bursting-101.html
Regards,
Gareth

Could not deliver the output for Delivery channel:null

XML Publisher Report Bursting Program is throwing the following exception
Log file
========
XML/BI Publisher Version : 5.6.3
Request ID: 11900899
All Parameters: Dummy for Data Security=Y:ReportRequestID=11900819:DebugFlag=Y
Report Req ID: 11900819
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:DB94
Preparing parameters
null output =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900899.out
inputfilename =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Data XML File:/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Set Bursting parameters..
Temp. Directory:/caop/app02/common/caopcomn/temp
[071713_110919401][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.1.0 - Production
[071713_110919410][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=11900819, user-variable:cp:language=en, user-variable:cp:responsibility=21540, user-variable.OA_MEDIA=http://db172.coresys.com:17204/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=11900819, user-variable:cp:locale=en-US, user-variable:cp:user=PRAYAPUDI, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=11900899, user-variable:cp:org_id=0, user-variable:cp:reportdescription=Care One Salary Change Approval, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Output File
========
<?xml version="1.0" encoding="UTF-8" ?>
- <BURS_REPORT>
<REQUESTID>11901286</REQUESTID>
<PARENT_REQUESTID>11901285</PARENT_REQUESTID>
<REPORT_DESC>Care One Salary Change Approval</REPORT_DESC>
<OUTPUT_FILE>/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11901286.zip</OUTPUT_FILE>
- <DOCUMENT_STATUS>
<KEY />
<OUTPUT_TYPE>EXCEL</OUTPUT_TYPE>
<DELIVERY>email</DELIVERY>
<OUTPUT>/caop/app02/common/caopcomn/temp/071713_120851408/xdo1_2.xls</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details..</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
XML File
======
<?xml version="1.0" encoding="ISO-8859-1"?>

<CAO_SAL_CHG_APR>
<LIST_G_EMAIL>
    <G_EMAIL>
      <EMAIL>[email protected]</EMAIL>
      <LIST_G_MESSAGE_NUMBER>
<G_MESSAGE_NUMBER>
          <MESSAGE_NUMBER>1</MESSAGE_NUMBER>
          <PERCENT_CHANGE>-98.75</PERCENT_CHANGE>
          <SALARY_CHANGE_AMT>-23,621.00</SALARY_CHANGE_AMT>
          <DATE_CHANGE_MADE>07/16/2013</DATE_CHANGE_MADE>
          <APPROVER_NAME>Veluz, Cynthia Avila</APPROVER_NAME>
          <APPROVER_JOB>Administration|Center|Payroll/Benefits Coordinator</APPROVER_JOB>
          <PERSON_NAME>Donet, Andrew P</PERSON_NAME>
          <PERSON_NUM>131996</PERSON_NUM>
          <LOCATION_CODE>HR - CareOne at Morris ALF</LOCATION_CODE>
          <REGION_2>NJ</REGION_2>
          <JOB_TITLE>Administration|Center|Director of Admissions</JOB_TITLE>
          <CURRENT_ANNUAL_SAL>299.00</CURRENT_ANNUAL_SAL>
          <PREVIOUS_ANNUAL_SAL>23,920.00</PREVIOUS_ANNUAL_SAL>
          <PAY_BASIS>PERIOD</PAY_BASIS>
          <CUR_PAY>11.50</CUR_PAY>
          <CHANGE_DATE>07/21/2013</CHANGE_DATE>
          <SALARY_CHANGE_REASON></SALARY_CHANGE_REASON>
          <EMPLOYMENT_CATEGORY>Fulltime-Regular</EMPLOYMENT_CATEGORY>
          <ERIC_WILLIAMS>[email protected]</ERIC_WILLIAMS>
        </G_MESSAGE_NUMBER>
      </LIST_G_MESSAGE_NUMBER>
    </G_EMAIL>
</LIST_G_EMAIL>
</CAO_SAL_CHG_APR>
Control File
========
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="CAO_SAL_CHG_APR/LIST_G_EMAIL/G_EMAIL">
<xapi:delivery>
<xapi:email server="smtp.coresys.com" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected]"
attachment="true"
subject="Salaries Changed Yesterday">
Please do not reply to this email, it is system-generated.
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Care_One_Salary_Change_Approval" output-type="EXCEL"   delivery="123">
<xapi:template type="rtf" location="xdo://CAO.CAO_SAL_CHG_APR.en.US/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
It is greatly apprecaited, if you can take a look the issue.
Thank you,
-Pradeep.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

Error!! Could not deliver the output for Delivery channel:null

Hi Friends,
XML/BI publisher : 5.6.3
Oracle Applications : R12.0.6
Bursting program Log file
==================
XML/BI Publisher Version : 5.6.3
Request ID: 993023
All Parameters: Dummy for Data Security=N:ReportRequestID=993022:DebugFlag=Y
Report Req ID: 993022
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:XXXXXGRP02
Preparing parameters
null output =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993023.out
inputfilename =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Data XML File:/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
Set Bursting parameters..
Temp. Directory:/tmp
[041210_040045855][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[041210_040045859][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=993022, user-variable:cp:language=en, user-variable:cp:responsibility=50537, user-variable.OA_MEDIA=https://appscgrpdev.oracleoutsourcing.com:443/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=993022, user-variable:cp:locale=en-US, user-variable:cp:user=Dev2, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=993023, user-variable:cp:org_id=90, user-variable:cp:reportdescription=Test_xml_bursting, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Bursting program Out put file
==================
Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

Problems performing offset null and shunt calibration in NI PXI-4220

I am using a 350 ohm strain gage for the measurements, i have already create a task in MAX, when i want to perform offset null in the task, the program shows a waiting bar and the leds in the 4220 board start to tilting, but when the waiting bar stops, MAX gets blocked. it has been impossible to me to perform the offset null, what can i try?.
which will be the correct values for the parameters beside the gage parameters for the strain measures?

Hello,
Thank you for contacting National Instruments.
Usually when this problem occurs, it is do to incorrect task configuration or incorrectly matched quarter bridge completion resistor. Ensure that you have the correct Strain Configuration chosen. The default is Full Bridge I. If you only have a single strain gauge in your configuration, you will need to change your configuration. Also ensure that if your are using a quarter bridge completion resistor make sure that it is 350Ohm not 120Ohm. If the resistor if 120Ohm you will more thank likely not be able to null your bridge.
Please see the PXI-4220 User Manual for more information about your configuration and signal connections: http://digital.ni.com/manuals.nsf/websearch/F93CCA9A0B4BA19B86256D60
0066CD03?OpenDocument&node=132100_US
Also, you can download and install the latest NI-DAQ 7.2 driver: http://digital.ni.com/softlib.nsf/websearch/50F76C287F531AA786256E7500634BE3?opendocument&node=132070_US
This 7.2 driver has a signal connections tab displayed when configuring your DAQmx Task which show you how to correctly connect your signals.
Regards,
Bill B
Applications Engineer
National Instruments

Bridge Offset Nulling Doesn't Seem to Work With SCC-SG24

Does anyone know if the DAQmx "Perform Bridge Offset Nulling Calibration" vi works with the SCC-SG24 modules? We have used our NI-9237 module in the past to acquire dual-channel load cell (thrust & torque) measurements, and calling that vi does a fine job of zeroing out the values before applying the load. However, it doesn't seem to work when we try to take the same measurements using an SCC-SG24 module.
We are able to zero the values manually, by using the nulling resistors and potentiometers in the SCC-SG24. But, whether the nulling resistors are installed or not, we are not able to zero the values using the "Perform Bridge Offset Nulling Calibration" vi. Running that vi does induce a significant offset in the values, but it is not the correct offset needed to bring the values to zero. For example, with no load applied, a torque reading before running the vi may be +1090 in-lbs, and be "zeroed" to -465 in-lbs after running the vi. Running the vi multiple times (to check repeatability) always brings us back to approximately -465 in-lbs.
An additional issue (not sure if it's related or not) is that if we try to run this vi to offset just one of the channels in the task (such as just thrust, but not torque) it will still induce a small offset in the other channel, which doesn't seem right.
I guess I'm not clear on whether the subject vi is performing an operation on the hardware, the software, or both, so I'm not sure whether the SCC-SG24 modules may not be compatible with this vi?
Thanks for any help you can provide.

Hello Dhruser1,
I think that the DAQmx Perform Bridge Offset Nulling Calibration should work for the SCC-SG24 module. Take a look at this article: Removing Large Initial Offset for Load Cell or Strain Measurements with SCXI-1520 or PXI-4220 in particular it mentions that using this VI in addition to the auto zero can introduce an offset. If you're doing both these is likely the cause.
Also, when you specify specific channels using the channels input are you also setting the "skip unsupported channels to false? If not this may be why it affects other channels.
I hope this helps, and if not please feel free to post back with an update after trying these things.
Cheers,
Brooks

Error 200380 occurred at DAQmx perform bridge offset nulling operation

I had a working VI that could balance a wheatstone half bridge and read and record measurements. My sensors are attached to a SCXI-1314 modle in a 1520 box in channel 0 (positioned as in the manual for half bridge) with the completion resistors in the appt places in ch7. It used 'custom voltage with excitation'.
Wanted to improve this VI so that it would also do a shunt calibration. I therefore connected the shunt resistor in the board over my active sensor as in the manual. I tried then to create a virtual channel for it - but it wouldn't work. So I gave up on that idea and tried to put things back how they were - deleted the virtual channel, and removed the connections to the shunt resistor. Except now none of my previously working VIs will work. I have built a new VI, and that can find a signal but not balance the bridge. I get:
error 200380 occurred at DAQmx perform bridge offset nulling operation.
I have checked the hardware again, and it's all wired correctly - it seems like the VI can see the channel but doesn't know what to do with it. Have running the VIs with and without a custom voltage with excitation channel created but nothing works.
Help!

Hi LucyWH
Have you tried re identifying the chassis in Measurement and
automation explorer?
Have you changed the jumpers at all as when rewiring this is easily
overlooked?
I have found some links that you may find useful:
Error -200380 When
Calibrating SCXI-1520 in NI-DAQmx
http://digital.ni.com/public.nsf/allkb/6E94108C9611910186256D43007C2584?OpenDocument
Common NI-DAQmx Error
Codes and Solutions: Codes -200300 to -200999
http://digital.ni.com/public.nsf/allkb/8A0E097385A4269586256DBA0054E668?OpenDocument
Regards
Robert
National Instruments UK & Ireland

Getting error -200077 in strain channel.

Hi all,
Actually I am using PXIe-4331 card with 4330 connector block. It have 8 strain channels. In that channels, i have connected one quarter bridge Strain Gage.
But, i am acquiring all the channels. I am getting error -200077 at that time. Anyone can explain me?

Hi,
There are many reasons for this error -200077.
Some of threads are already cover this error and the solution for the same.
Please refer these threads for your reference.
Reference 1
Reference 2
Reference 3
Reference 4
Mainly this error occur due to some error in your channel create VI. I feel you should check it again and try to make it according to your sensor specification.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

Error offset null

Hi. I try to take a data of torque on shaft with strain measurment (half bridge system with 2 gages on 45 degrees). Everytime when turn on offset null data starts from 0 and then jump to 80 Nm. The problem is that jump. I dont have any load to have that jump and i dont have prestressed state. I use filtering ( low pass 1hz) to get over the noises in static system. Can anyone help me with that jump problem. Thanks.
Solved!
Go to Solution.
Attachments:
Untitled.jpg ‏471 KB
Untitled2.jpg ‏262 KB

Thanks for reply. I set AC & DC Estimator VI to show me starting and established values. Then with constan I move all values to zero (any time I wаnt). After that I can start loading to the shaft normaly. What you think for that solution?
Attachments:
Untitled3.jpg ‏229 KB

Not able to get data in the F4 help for disrtibution channel in ic web

Hi Experts,
Need some help.
1. I have a ic web screen for complaint. Here in the header(Form view) there is a F4 for Distribution channel. The item list which is a table view, which contains one column . This column contains checkboxes.
Issue:
scenario 1: If in the item, if there are two checkboxes checked, and then if i click on the F4 for Distr channel of header then in the F4 its giving one record. its working fine.
scenario 2: But If in the item, if there are more then two checkboxes checked, and then if i click on the F4 for Distr channel of header then in the F4 its not giving any record. How to correct this???
Analysis:
I found that in the method GET_HELP_VALUES of class CL_CRM_IC_F4HELP, there is a statement as below.
infields = request->get_form_field( 'InFields' )."#EC NOTEXT
For scenario 1, the above statement returns the input fields with some values...
For scenario 2: the above statement returns nothing. Its completely blank.As a result its not showing any record in F4.
I dont understand why it is happening. Could any one please help in this regard.
version: CRM 5.0 . Standard F4 help ( ic_base-> f4_help)
Thanks
Sudhansu

Hi,
Check if the characteristics used in query are direct objects from cube or navigation attributes of any other characteristics. In case of navigation attributes you need to have master data maintained.
And as mentioned by Vamsi, check the text data maintained for 0CUSTOMER. And for checking data you can mark Key and Text option.
Regards,
Durgesh.

Support for n-channel icc-profiles

I have recently attended a symposium where some speakers touched on Photoshop’s (or the whole CS’) lack of support for n-channel ICC-profiles.
And (while I have to admit that the ramifications may be beyond my comprehension) the point seems very much valid.
I suspect this issue might also concern the matter of the Spot Channels-and-Layers-situation that has come up in this Forum repeatedly and changing the current situation may well fall in the neighbourhood of Programming and Nightmare.
Moreover the question of who should or could provide those profiles in any quality regarding the overprint behaviour of the tints (and their possible combinations) would appear daunting.
Still, even a simplyfied physical model may be an impovement to the recent situation.
Plus, as the speakers pointed out, anything above a 7-channel profile is hardly realistic, anyway.
In all probablity Adobe is already aware of the matter through its contacts with/in ICC, FOGRA and other bodies concerned with printing-matters (and their representative at said symposium).
Nonetheless I would like to voice my support for the demand to see n-channel ICC-profile-support in Photoshop.
Edit: This might be especially beneficial with flexo-printing in CMYKOGB (CMYK + orange + green + blue) – I don’t have enough experience with flexo to judge this with any statistical relevance, but it seems to be fairly popular.

Thanks for Your answers.
changing to support an arbitrary number of channels of color data will require a huge number of changes to the application to make even common features work
Understandably.
But it would seem that this may be a solution to certain dissatisfactions with the Spot Channels’ behaviour that have come up in this Forum, too.
Well, not a straightforward solution, I guess, as one may not want to separate an image using the additional Channels but keep that in CMY(K) and only use the Spots for graphic elements etc. … and if Photoshop were to provide seven-Channels-Layers I suspect it wouldn’t be long until someone asks for eight.
The packaging-industry’s needs don’t seem to be met by the CS currently, but the cost-benefit-considerations are certainly valid.

No Aapter registered for the channel and not initialized

Hi Guys,
I am working on Mail 2 File scenario. when the scenario is executed i am getting the below error in sender MAIL adapter communication channel.
No adapter registerd for the channel & not initialized
Thnx,
Siva

Hi,
Depending on your XI/PI version, apply one of the notes below to correct import the ESR content:
PI 7.1X:
#1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
XI 7.0:
#836200 - SAP NetWeaver 7.0: Importing Process Integration Content
XI 3.0:
#705541 - XI 3.0 (SP1 and higher): Importing XI Content
Also, check if the service for the adapters are running. Restart the J2EE Engine.
If not solved, you may try redeploying the adapter's driver.
Regards,
Caio Cagnani

__ Is there a way to adjust the key commands for switching channels in curves?

__ Is there a way to adjust the key commands for switching channels in curves?
By that I mean <command> + 1 for cyan, <command> + 2 for magenta etc. like Photoshop CS3 rather than <option> + 3 for cyan etc.
There's gotta be a way under Edit --> Keyboard Shortcuts - but I can't find it!
Thanks,
Hugh

Hi,
You can find the CS4 plug-in here:
http://blogs.adobe.com/jnack/files/Use_Old_Shortcuts.zip
It's inline in tis post with some more background info:
http://blogs.adobe.com/jnack/2010/05/use_legacy_shortcuts_option_in_cs5.html
regards,
steve

Communication channel not working -- No Adapter Registered for this channel

Hi Experts,
I see the status of one of my Communication Channels (In RWB Communication Channel Monitoring) as
"No Adapter Registered for this channel".
I saw one of the threads related to this but could not fins a suitable reason for it as our issue seems to be different here.
We have recently deployed the SFTP adapter and PI team is testing this communication channel and they got this error.
I checked and found that SFTP adapter (in the JAVA EE applications) was not working and when I tried to start ,its giving error
failed to start.
additional status message as
Status Details: Cannot load class "com.advantco.pi.af.adapter.sftp.SPIManagedConnectionFactory". Possible reasons: 1) class file cannot be found in the JARs located in the RAR file,
2) class file cannot be found in referenced loaders,
3) failed to initialize some static block(due to unhandled exception),
4) failed to load or there is incompatibility with some native parts, or
5) cannot load a class related to it, due to some reasons above.
Could you guys suggest from where exactly is it trying to pick up the files.
is it u201Cu2026/j2ee/cluster/apps/xxxxxxx/SFTP Adapteru201D ????
Can anyone suggest the possible reasons and the root cause of it
Regards,
Yogi

Hi Yogi,
i am glad you solved the problem.
If you have any issue with the Advantco SFTP adapter, best is to send an email to "support at advantco.com" directly.
Peter Ha * SAP NetWeaver PI Architect * Advantco International LLC
www.advantco.com

Regarding offset nulling for strain channels

Similar Messages

Maybe you are looking for