Regarding oracle 11g health check
Hi,
Does my oracle 11g health check checks the health of oracle 10g? The other way round is definitely not possible. But i was wondering if this were possible?
What "11g health check" are we talking about?
Justin
Similar Messages
-
Hi John I need your help regarding "Oracle EPM Health check" ?
Hi,
I need your views as we frequently start Hyperion services whenever it goes down (ex Workspace or EPMA or HFM).
These services most of the time after restart does not work properly.
Kindly suggest is it correct way to start only that service which stops or we need to bounce all Hyperion services?
Secondly how to validate my Hyperion Environment if is it working properly.
Version 11.1.1.3
URL check may be OK but sometime URL opens but problem occurs after login.
Rehards
Hyp User
Edited by: 936921 on Jun 13, 2012 7:16 AMThanks John,
I agree with you.
But situation is as we have multiple customers and multiple instances.
case 1: worspace went down ---restarting only workspace services; is it correct as we do mostly?
case 2: EAS and reporting may down---restrting only these two services; is it correct way to resolve issue?
case 3: HFM web services may down: starting IIS, www, http and HFM; is it correct to resolve?
we need to understand our resolution. OR we always go and stop Hyperion and start again Hyperion all services.
Regards
Hyp User -
Oracle Applications health check
Hi,
I have to
1). Do health check of oracle applications 11.5.9
2). And recommend to upgrade to R12.
I always have these questions in mind. If a client is running happily on 11.5.9, what should be provided so the client will be convinced to upgrade to R12 (Apart from new features, security, performance).
How to do health check (what all to check for).
Kindly please suggest,
Regards
TaherHi Taher;
1). Do health check of oracle applications 11.5.9
2). And recommend to upgrade to R12.> How to do health check (what all to check for).
In addition to Hussein Sawwan greatest post, please look my blog:
http://heliosguneserol.wordpress.com/2010/06/29/monitoring-system-health/
I always have these questions in mind. If a client is running happily on 11.5.9, what should be provided so the client will be convinced to upgrade to R12 (Apart from new features, security, performance).We have same questions too, the main reason to move R11 to R12 is oracle will stop support soon *(As Hussein Sawwan mention)*. If possible you can share this information wiht your client:
Premier Support for Oracle E-Business Suite Release 11i ends in November 2010
http://blogs.oracle.com/stevenChan/2010/01/ebs11i_minimum_patching_baselines.html
Regard
Helios -
ORACLE 11G R1 CHECKING NETWORK REQUIREMENTS NOT EXECUTED
Hi all,
Im trying to install Oracle 11g R1 on Oracle Enterprise linux 5 so while it was checking for network requirements it showed me an requirement here is the short message :
Checking network configuration requirements ...
check complete The overall result of this check is : not executed
Recommendation : oracle supports installations on systems with DHCP-assigned public ip addresses. however the primary network interface on the system should be configured withstatic ip addresses in order for the oracle software to function properly. see the installation guide for more details on installing the software on systems configured with DHCP.
=====================================================================================================
So what should i do ? continue installation or no , can someone guide
Help me please
Thanks a lotThanks PavanG for your information
So i m gonna proceed to the installation and let you informed about that ... -
sir/mam
i am facing a problem in installing the oracle 11g.. after installing the software. when i am going on command prompt then it is asking for user name and password. after then it is showing that connected to oracle. then when i am clicking on the desktop icon get started with oracle database 11g, it is opening a web page. i am not getting what to do after that..?????
sir/mam please give me some advice.. its very urgent.
thanks a lot..Hi,
Reading Database Express Edition Getting Started Guide might help
http://docs.oracle.com/cd/E17781_01/admin.112/e18585/toc.htm
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
Hi All,
What you recommend for a Healthy database. What are the neccesary checks we do that our database is always healthy. What oracle recommends. Please explain your views.
Thanks & regards,
GKYour question is roughly the equivalent to asking someone to teach you how to fly an airplane in three simple paragraphs.
There are books, hundreds of pages long, that do not adequately answer your question.
But two or three of those books and start doing the only thing that has been proven successful in learning this material. Read! -
Oracle 11g Active Data Guard and SAP R3
Hi All,
I have a query regarding Oracle 11g Active Data Guard and SAP R3.
Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
I appreciate your help to provide any link or document for the same.
Thanks,
VihangI have a query regarding Oracle 11g Active Data Guard and SAP R3.
Does the Oracle 11g R1/R2 Active Data guard feature supported with SAP R3?
I appreciate your help to provide any link or document for the same.
Oracle database 11g functionality certified by SAP, check below link
http://www.oracle.com/us/solutions/sap/oradb11g-article-upd-1-323074.pdf
http://www.oracle.com/technetwork/middleware/ias/downloads/osb-11gr1certmatrix.xls -
Hi all,
Some enquires regarding database health check. I did some research regarding health check, got overwhelmed by the information available out there.
Currently I don't have any report on hand, but currently working and starting on one. This report serves as a report for reference, to understand if there's any database performance issue, and as a report for management.
Wish to check with you folks, what are the typical things that I can look at on a daily basis to understand my database health status, eg. Buffer Hitrate, database I/O etc, especially those that may/will contribute to impact on the database performance. Or is there any good reference link whereby I can do some readup regarding such a health check?
Thanks in advance for any input.
EugeneHi Eugene,
Well that's a pretty open question and I guess you will get a lot of replies which I look forward to monitoring as there should be some very interesting ones there.
Anyway, let me just open with one point that I have found very useful in the past. As regards Database Performance , you can look as much as you like at the statistics and a great deal of discretion is required in interpreting them but the real test for me of how well a database is performing is in terms of the user (or application) perception. Are the responses from the database good enough to meet the users expectations. Check the average response time for example and set guidellines for what is acceptable, very good response , very bad response etc.
I use this as a guideline so then once the database is perfoming in the sense that the user is satisfied (or better still happy with the performance) we can gather the statistics (from Oracle 10g onwards there are lots of tools built in like ADDM and AWR for gathering and storing the database statistics) and create baselines. Once we have baselines for a normally performing system, as soon as problems are reported we can run off a diagnostic tool like ADDM for that period , compare it against the baseline and look for the striking differences. From there we can start an analysis of individual numbers, buffer hit ratios etc. to delve further.
Hope this helps , I am sure lots of other people will chip in to this
Regards -
Oracle 11g RAC installation on windows 2008 64 bit
Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank youHi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit. -
Hi All,
oracle 11g R2
RHEL5
can anyone please suggest how to do oracle 11g RAC database health check?suggest any link or metalink notes if any?
thanks,
Mike.Hi,
You can use RACcheck tool for monitoring can download from here :RACcheck - RAC Configuration Audit Tool (Doc ID 1268927.1)
HTH -
Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew
Hi All,
I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
As per my understanding of pre-requisites:
1) I need to install Oracle SOA Suite 10g on my VM.
2) I also need to install Oracle SOA Suite 11g on my VM.
3) I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
4) I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
5) I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
If there is any alternative suggestion then please let me know.
Regards,What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.
-
How to automate DB health check report using OEM 11g
Hi,
I have been asked to share the DB health check report using OEM 11g. Could you please let me know how to achieve this and the report should go to his email.
Thanks in advance,
Balacheck,
manually you can schedule it through dbms_hm
http://www.oracle.com/technetwork/articles/sql/11g-resiliency-091703.html -
Integrity check of tables between Oracle 9i and Oracle 11g
Hi,
|Is there a tool or a way to check the integrity of data in the tables after migrating data from an Oracle 9i database to an Oracle 11g database?
Thanks for you help.Hi,
How do you want to proceed for your migration ? Assuming everything was OK in your 9i database normally things should go well whatever the method.
For example as the previous posters mentioned if you use exp/imp and if you have "successfully without warnings" at the end of the operations you can trust those messages. Physical corruption is not the only possible problem and with exp/imp some things not to forget :
- checking the compatibility of the source and target database charactersets and positioning correctly the NLS_LANG variables for exp and imp
- activity on the source at the time of your export ? Your export has to be "logically" consistent.
Oh and about block integrity do a good full rman backup on your 11g database after the migration and check v$database_block_corruption after the backup. RMAN is your friend about physical integrity. Even after an incremental rman backup if a query on this view gives 0 result you can be sure you have no block corruption (at least if block_change_tracking is not used)
Best regards
Phil -
Oracle Database Audit Health Check
Hi Experts,
I have been looking for checklist to perform the oracle database audit.
what is the best practise to perfrom the database audit health check.
Regards
Mohammed. Abdul MuqeetHi,
What is it mean for Health Check, You mean you have audit enable in your database and you want to manage it. if so
then you have to take care of Audit area at OS level and sys/aud$ table
for Audit Area: you can schedule a job to clear that are time to time
for sys.aud$: Move this table to non- system tablespace and moniter the uage. can purge the data if not required after taking the backup..
HTH -
Hi
I would like to use ASM storage for my single instance oracle 11gR2 database. I am a little bit confused so that asking some question about Oracle 11g ASM.
1. Does Grid Infrastructure mandatory for installation Oracle 11g ASM instance?
2. Without installation Grid Infrastructure can I full fill my requirements ?
Regards
Rabi"If you plan to use Oracle Restart or Oracle Automatic Storage Management (Oracle ASM), then you must install Oracle Grid Infrastructure before you install and create the database. " -- http://docs.oracle.com/cd/E11882_01/install.112/e47689/oraclerestart.htm#LADBI999
Maybe you are looking for
-
Hi, I am in the process of configuring P-Cards in SRM 5.0 Standalone. I am faced with the following issues: 1. I am not able to see the 'Procurement Card' drop-down field when the shopping cart is being created by the Requisitioner. How do I make thi
-
Problem in connectivity with database
Hi anyone, I have installed Oracle-8i database and Developer-6i in Windows-95. I am facing the following problem in connectivity: In the connection dialogue box, I enter user/passwd as scott/tiger and host string as odbc:polite. I am getting an error
-
Function module converts sy-datum to date according to user settings in SAP
Hi experts, I need such a function module which converts sy-datum to a date format according to user settings in SAP. Thanks, Yogesh
-
Render Fail | Please help.
I am trying to render a 4 minute long montage in after effects, and no matter what I do it fails. After about 40 seconds or so, it just stops rendering and in the queue it says under status; Failed. I was thinking that maybe it was a problem wit
-
Customer Master - Preview (address) button, change default lines from 10
Currently on ECC 6.0. I would like to change the default setting of "Number of Lines" from 10 to 6 within the "Preview" button on the Address tab within XD01,2,&3. This would be a system or user setting so the user doesn't have to manually change t