Regarding OSM Studio Installation
I had installed OSM design studio plugins in eclipse (version 3.3.0), it is installed without any error but the Studio option is not displayed in the main menu of eclipse.
What might be the reason for it? Please help regarding it.
Hi,
You should use Eclipse Version: 3.4.2. Once you have done that and install all the plug-ins (both studio core and OSM plug-ins). Refer to the Studio Installation Guide to perform all the other setups. If you are still facing the same issue, please post it on the forum and let me know the following details:
1. What version of the studio are you using
2. After which step are you getting stuck?
Thanks,
Deepankar (Deep) Dey
OSM - Product Management
Similar Messages
-
OSM Service Studio installation in eclipse - missing files in installpack
Hello,
we are trying to install the neccessary updates in eclipse according to the document "Oracle Communications Studio Version 3.0.0" to run OSM Service Studio.
however eclipse complain: "Service Studio for Order and Service Management Integration (1.0.0.v200805122103-b276) requires plug-in "com.mslv.studio.activation (3.0.0)", or compatible." when we try to install com.mslv.studio.provisioning.integration.feature_1.0.0.v200805122103-b276.jar from a local install site.
When I look i the documentation on page 20 I realise that the following modules are missing in the downloaded file with updates V13266-01.zip (provided from edelivery.oracle.com):
(1) Service Studio for Activation 3.0.0
(2) Service Studio for Activation SRT 3.0.0
(3) Service Studio for Inventory 1.0.1
Have somebody else had this problem and solved it?
//JesperHi,
I found this article under subject "Where To Find Activation And Inventory Plugins For OSM Service Studio Installation" in My Oracle Support
Goal:
Where can one find the Service Creation Environment (a.k.a. Service Studio) files for Activation and Inventory?
The documentation states that these components are necessary:
(1) Service Studio for Activation
(2) Service Studio for Activation SRT
(3) Service Studio for Inventory
Solution:
Download the "Oracle Communications Service Creation Environment x.x Software and Documentation" package from each Media Pack on eDelivery.Oracle.com :
(Activation) Oracle Communications ASAP
(Inventory) Oracle Communications Unified Inventory Management
(Provisioning) Oracle Communications Order and Service Management
Search on Oracle Communications products.
Maybe this will help. However after choosing the Oracle Communications product line and platform as Sun Solaris(64-bit), it listing did not show the aforementioned package. You may as well try. Do let me know if you are able to download the package.
Thanks -
SAP NetWeaver Developer Studio Installation guide
Hi All,
Could you please provide the SAP NetWeaver Developer Studio Installation guide?
Thanks & Regards
SaraHi Sara,
Go to https://service.sap.com/nw04installation go to the bottom of the page expand <b>dev env</b> and you'll see the <b>Installation Guide - SAP NetWeaver Developer Studio</b>
this should answer your question.
Regards
Juan
Please reward with points if helpful -
Workaround: BEA Workshop studio installation with JRockit
If JRockit is your primary JVM (i.e., JRockit is the only JVM installed OR JRockit appears before the Sun JVM in the PATH environment variable), the Workshop Studio installer will fail with the error message:
"Can't launch executable. Could not load jvm.dll
Try re-installing the Java VM or change the Java VM used by the application"
WORKAROUND:
To resolve this error, create a new folder <JRockit>/jre/bin/client and in this folder make a duplicate copy of the contents of the folder <JRockit>/jre/bin/jrockit. Then run the Workshop Studio installer again.I had beehive working earlier with tomcat. I moved tomcat directory so it is not working anymore.
i have java-home to jdk1.4 and the same in eclipse preferences..
but
while installing studio i gave jdk1.5 as the java-home.
I'll to re-install eclipse and the studio plugin. and try again. -
Regarding the Post Installation and SP Level
Hi All,
We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system.
As our EP system is on SP 11and NWDI system on sp 9,Do we need get EP and NWDI Patch level in Sync? as there would be developers working from EP and BW as well on this NWDI server.
Here My doubt is:-
Do the Nwdi System needs to be in the same patch level as our EP system (as it is installed on EP itself.)
Do we need to run the Template for the Newly installed NWDI only after the Patch Upgradation?
Kindly Advice
Regards
Santosh.N.Gthe patch level of EP and NWDI should be same
-
Hi,
I am new to UCM and need your help.
I have already installed UCM 10gr3 content server and have apache web server.
I would like to install site studio and then try to create contents and publish the same.
Can some one help me with site studio installation for my configuration.
Please also reccomand tutorials to understand site studio better interms of installation and usage.
Cheers
vivekThis error may occur if the zip you are selecting and uploading is not actually the component file. For example, you will see this error if you select the Site Studio application zip file (SiteStudio_10gR3_20080502.zip) instead of unzipping this file then selecting the component zip (sitestudio8.0.0.260.zip) from the unzipped "component" folder.
I hopes this information helps you find a solution to your difficulties.
Jon-Eric Eliker
Frontline Logic, Inc.
www.frontlinelogic.com -
Qery related to Conversion Agent Studio installation
Hi All,
I have a query related to Conversion Agent. We have downloaded the SAPNWCM20_0-20001444.SCA file and installed the conversion agent engine on SAP XI J2EE engine which is basically installed on Sun Solaris system.
I want to use conversion agent studio at a remote place on Windows OS 32 bit system.
Please help me
1) how to install the <b>conversion agent studio on windows 32 bit system.</b>.
2)<b> Is it possible to install conversion agent studio on Windows 32 bit system because Conversion agent engine is installed on Sun Solaris system.</b>
Thanks & Regards
PrabhatHi Can you please elaborate more on installation of conversion agent studio as the document mentioned in the link is not in details regarding installation of conversion agent studio.
Thanks & Regards
Prabhat -
BR*tools studio installation
Dear Experts,
We tried to install brtools studio in windows 2003 server but got some problem relate to web service that not generated during installation. I tried to folow guidence that i got from SDN "BRTools Studio for Oracle DBA" and will use Multi-instance server modes.
as mentioned on the prerequsite, before start installation, i already install J2SDK 1.4.2_19 and also Microsoft Internet Information System, then i run the installation. Installation actually finished successfully, but when i click launch button, it direct to http://<server>:port/studio but i got error message that page can not be found, then i tried to check on the IIS console and i found that there is no new website are created.
Is there any setings that we need to prepare on web server site? need your advice for this case.
Thanks and regards,
BagusHi,
A NEW TOOL From SAPu2026u2026u2026u2026.ADD Multiple Instances to your BR*TOOL studio and enjoy freedom of Administration for Multiple Instances with your favourite WEB browser..
Download Br *TOOL studio from SDN(sdn.sap.com)
Create a Studio home in any Drive With This Directory Structure
:\Oracle\sap\brtools\studio
EXTRACT the SAPCAR -xvf BRSTUDIO710EN__XXX.SAR into this directory
1) Call setup.cmd from command prompt
2) Click Install
3) Give https port By Default its 8888
4) Provide Password
5) Now keystore File (This is for security as we are using HTTPS)
We need to generate it using JAVA commands
Open Command Prompt Change Directory to java home
Run This Command and provide info:
Keytool -genkey
Give this path to next screen and password also you provide just now
Now a file has been generated
C:\document and setting\username\.keystore
6) Now installation is over.
Now Come to your Server
Here i am sharing the procedure to run and use BRTOOL STUDIO
1) To Run Studio Go to Studio home and run server.cmd
2) To Access it go to url;
Https:hostname:port/studio
3) A pop-up window will come
Provide username:Administrator(Same as shown Capital A and all other small )
Password:You provide at the time of installation
4) Click on instances and then Create
5) Provide Info as Password for Administrator
Database user (Please note that password of DB user should not be containu2019@u2019 in password string)
6) Give The Path for brtool profile parameter
Oraclehome/database/init.sap
7) Finally click on Go(Left Side)
8) Now you will be log off and login to your instance Using
Administrator as username and password you provide at the time of installation
9) Now here you can create more user for brtool with different user roles.
You can use it to view space, check status ,control files,backup,restore and you now more thingu2026u2026.. -
Br*tools Studio installation FAILED
HI ALL,
i downloaded br tools studio 7.10(2), from sdn and trying to install on windows 2003 on sap ecc6.0 with
basis patch level 9.0. but it keep failing to install without any error logs. is there anything else i need.
please help me out on this in detail answers will be appreciate as i am new to basis.
thanks in advanceHi Rizwan
Have you meet all the pre-request as discribed in the installtion document?
Please cross check the installation [Document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6049ab24-f948-2b10-929e-eda13ff1236f]
Regards
Uday -
Query regarding Enterprise Link installation
Hi,
Request a clarification from this forum.
I am working on the Oracle BAM example provided in the paper "Enabling Real Time Operational Analytics: Integration between Oracle E-Business Suite 11.5.10 and Oracle BAM 10.1.2". In the section titled "Design Data Extraction and Consolidation Layer", there are certain steps to be performed from Design Studio.
My existing installation was done using the package "bam_windows_x86_101330.zip" (which is without Enterprise Link). Now can I download the "bam_with_el_windows_x86_101330.zip" and run the installation just to install the Enterprise Link component separately without disturbing the current Oracle BAM setup?
Thank you.
Regards,
BaluWhen I am trying to login into Design Studio, below error is occurring:
Unable to connect to the Sagent Data Flow Service.
[Sagent error code: PlanMgrEnv -- 0x1, PlanMgrEnv -- 0xE]
CSa_Exception
[Sagent error code: TP -- 0x2, TP -- 0x17]
[Windows error: 10061]
No connection could be made because the target machine actively refused it.
Request someone to help me resolve this issue. -
BrTools Studio installation error
Hello,
I am trying to install BrTools Studio but throws me an error :
INFO 2009/04/30 14:24:16 [Setup] SAP BR*Tools Studio Setup
INFO 2009/04/30 14:24:16 [Setup] Version 7.10 (1)
INFO 2009/04/30 14:24:16 [Setup] Initializing...
INFO 2009/04/30 14:24:22 [Setup] Setup initialization finished successfully.
INFO 2009/04/30 14:25:06 [Setup] Starting installation...
INFO 2009/04/30 14:25:06 [Setup] Checking input parameters...
INFO 2009/04/30 14:25:06 [Setup] Extracting studio archive...
INFO 2009/04/30 14:25:39 [Setup] Extracting data archive...
INFO 2009/04/30 14:25:39 [Setup] Extracting web-app archive...
INFO 2009/04/30 14:25:39 [Setup] Applying system-specific data...
ERROR 2009/04/30 14:25:40 [Setup] System-specific data could not be applied: keytool returned with exit value 1
ERROR 2009/04/30 14:25:40 [Setup] Installation of BR*Tools Studio failed.
Any idea to solve this will be helpfull...
Thanks,
Vinod MenonHello,
All the steps are done accordingly to the documents and the keystore file also was generated and the installation at the last stage comes out with an BrTools installation unsucessfull and the log file states: system specific data not found.
Has someone come through such an issue?
Regards,
Vinod Menon -
Where is the forum that is belongs to visual studio installation problems?
Where is the forum that is belongs to visual studio 2013 installation problems?
->NH Kom<-
My Website > System History > http://bit.ly/sys-his
My App > Quick Links > http://bit.ly/quick-links
My App's Website > http://bit.ly/quick-links-appThey're over here.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup&filter=alltypes&sort=lastpostdesc
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Suggestion wanted for next release Sun Studio installer?
My name is Ngoc Nguyen, tech lead of Sun Studio Support Group. We are in the process looking for design/modifying our installer per customer's feedbacks or requests. We really want to make it become your most favorite installer.
Please give me all of your ideas, suggestions, requirements that you like the installer should have. We will consider any feedbacks.
Or If you already filed a CR (Changed Request) before and you feel strongly that we should implement it, please give me the CR number.
We really want to hear from you.
Best Regards,
Ngoc Nguyen
Sun Studio Support TeamI think new installer should provide an option to install the product as if it is extracted from a tar file:
- no packages are installed
- no changes in registry
- no root privileges are needed
- the product is completely installed under one directory,
so it is easy to uninstall this version - just remove one directory.
This installation is a very convenient way to try a new version without affecting any existing installation.
Thanks,
Nik -
Logic Studio Installation on other computer problems?
I have logic studio on my macbook pro, and I bought a friend a macbook pro for christmas. I then registered it in his name.
I am at his house fairly often and as I haven't used my other installation for Logic, would like to install it on his macbook, to use logic when there.
I see you have to own the 2 computers the 2 installations are on and one has to be a laptop and one a desktop. I would like to install logic on the other laptop as I did pay for it, but am concerned about downloading it onto his hard disk and it doesn't work, either because it would be on 2 laptops or because I've registered the laptop in his name.
Does anyone know if it would work?
Should I register Logic on the 2nd laptop in my name or his(as the laptop is registered)?
Thanks in advance.kerdgar wrote:
yea odd indeed.
anyway, having my hands full with getting started. This is my first time ever on Mac and Logic. but things have been so straight forward and easy up till now. (except the little installation thingy ;))
I have already recorded a little piece by my condensate Mic. and things sound pretty cool.
Now i have to get used to things and know the working my way around.
this is just damnationlike cool.
One thing that am thinking of is that when i run GR3 and start LS8 then the sound of guitar through GR3 gets rusty.
I wonder whether i should just record a file by GR3 software with all effects and sounds and then import the file into logic for close up on things.
cheers
You can open Guitar Rig IN Logic, if you have installed the AU (Audio Unit) plugin. From what I understand you use it standalone (as a separate application), but you can use it as a plugin as well. And your proposed workflow is possible, but it leaves more control if you record your guitar cleanly, and and add the effect as a plugin on the guitar track.
regards, Erik. -
[tim@pinkbox Downloads]$ ./ZendStudio-5_2_0.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.617/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[tim@pinkbox Downloads]$
I need this stuff to work. :?Oh wait, sorry, I got to far ahead of you, my solution above is if you already have Zend Studio Client installed, sorry.
But the problem is still the same, Zend's scripts are trying to set LD_ASSUME_KERNEL, which will give you these errors.
Maybe you can find some way to extract the files in the .bin setup file, modify the scripts and package them back into the .bin or contact support and tell them whats happening.
Maybe you are looking for
-
BAPI Error: No account assignment exists for service line 0000000000
I am using BAPI : BAPI_PO_CREATE1 to create a PO. I am getting this error while creating PO "No account assignment exists for service line 0000000000" Please help.
-
I have a folder that my iPad sync's with, however when I open up the photos folder on my iPad, the pictures are in a different order than in my folder from the computer? (I don't have a Mac fyi) Is there a way to simply organize them by date taken,
-
Problem with loading big image files in 1.4
Hi, I recently discovered that after updating my jdk from 1.3 to 1.4, my application seems to be failing to display image files over 300kbytes, or at least the display is corrupted. Originally I have a gif file over 300k (2048X512 pixels) and the dis
-
The 'L' key on 2007 Macbook stopped working
As stated, My 'L' key on my 2007 macbook has stopped working however every other key works fine. If it helps it running on Lion 10.7.5 If you have any advice, Please do share. Thank you in advance! Very much appericated
-
Error when create new apex_collection
Hi everyone, I try to create a process as below apex_collection.create_collection_from_query( p_collection_name => base_collection, p_query => "SELECT ASAT_DATE, ADMINISTRATION_UNIT_ID, PROJECT_ID, SUM(TOTAL_BOOKED_HOURS) as TOTAL_BOOKED_HOURS FROM C