Regarding oss access key

hi experts
while am opening the se38. it can ask the oss access key.
i dont know where it is available? i searched in forum. but i cant grasp the forum clearly. pls rectify it....
regards
surender

Hi
Go through the link given below :
access key
With Regards
Nikunj Shah

Similar Messages

OSS - access key

Hi there,
I'm new in ABAP.
I did install the SAP NetWeaver 702e 64bits on Windows 7 Pro 64.
The instalation was successfully, but when i'm going to create a "Hello World" program on SE80 (with the user BCUSER), appears a dialog asking for an Access Key (that could be generated at OSS).
I want to know where i can generate this code.
Sorry if this is not the correct forum for this question.
Regards,
Zack.

Hi Zack:
If you open the start.htm page located on your SAP NetWeaver 7.02 ABAP installation directory and go to the Section "Installation/ Uninstallation" > "Login via SAP GUI", you'll see the information below (probably you'll have tu use the "Next" icon at the bottom of the page).
BCUSER in Client 001 is preshipped with password: abcd1234. Change with Transaction SU01. If not you have to create your development user: BCUSER. Purpose of the BCUSER is to develop applications and maintain the system. If you create or modify SAP objects within the customer namespace (starting with Y or Z), you need to enter the developer key for this user: 29671482393151224771 (Remark: valid after you installed the licensekey. If your system type is "initial" enter: 07222097363139263004). Enter when prompted. (Remark: This is not an access keys to modify SAP objects. Custom development namespace is Z* or Y*).
You need to enter the developer key for this user: 29671482393151224771 (Remark: valid after you installed the licensekey. If your system type is "initial" enter: 07222097363139263004).
Regards,
Francisco Milan
Edited by: Francisco Milan on Oct 5, 2011 10:54 AM

OSS access key request

Hello All;
I have installed SAP Netweaver trial version from this website. when I try to create a program it keeps giving me a message telling me that I am not registered as a developer.please register in the online service system (OSS), then I will receive an access key.
How can get this access key as a developer for this trial version of SAP Netweaver?

Hi,
I followed all the steps in the link above given by SriKishan. However I got a license from SAP with only a txt file having the following contents :
----- Begin SAP License -----
SAPSYSTEM=NSP
HARDWARE-KEY=N1040927927
INSTNO=DEMOSYSTEM
BEGIN=20120923
EXPIRATION=20121223
LKEY=MIIBOwYJKoZIhvcNAQcCoIIBLDCCASgCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQcwggEDAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMjA5MjQxMzM4NTNaMCMGCSqGSIb3DQEJBDEWBBS/h4sMJoA5yLVm/EWrewV7UFfRpDAJBgcqhkjOOAQDBC8wLQIVAIse2QJSRwmb5WSM1HFV68zpa9dmAhQpTQ/JZPlc14lOCn2cwBlaUiq/Gw==
SWPRODUCTNAME=NetWeaver_MSS
SWPRODUCTLIMIT=2147483647
SYSTEM-NR=000000000311821364
The email body is empty and there is no mention of any acess code... Pls help.
Regards,
Suhas
[email protected]

Regarding SAP Access Key

Hi Gurus,
How can we find out the access key details of a particular SAP installation.
( the installation is registered one) . Please help me in this regard.
Thank You in Advance,
Vikram Krishna.

Dear Vikram Krishna,
If you are referring to Installation Number:
Follow the menu path in SAP GUI System -> Status, Installation number under SAP System Data.
Access Keys:
https://websmp202.sap-ag.de/support under Keys and Requests (You would need OSS username and password)
Regards,
Naveen.

Regarding the access key for an object

HI all
Please clarify me the doubt that an access key will be different for each and every object or one for all the objects.
regs
karna

Hi karna,
1. It will be different for all objects.
2. In fact, access key will be different
 for each object,
 and that too, for each different installation number
 as well as each basis version number
3. In short, access key is dependent upon the combination of
1. The object R3TR FUGR SFES
2. Sap Release (eg. 640)
3. Installation Number
4. It means that the access key for one standard program
 (in our server),
 will not work in another server bcos the installation number will be different.
regards,
amit m.

Asking for Access Key & register in OSS

Hi All,
Can anybody tell me that, while i am tring to create Generic datasource for Transaction data in BI 7, it is asking me Access Key and Register in OSS
What would be the reason for this...
Regards,
Kiran Telkar

The reason is you are developing new content within the SAP system, it requires an Access Key, you need to request this from your Basis team and you enter the code into Object you want to create and you will gain access and be able to create.

Oss problem for getting Access Key

Hi all,
      I have installed mini SAP . my license was expired that i have renewed... Now I have logged on using   uname = bcuser .
       The problem is-- when I creating any program using se38, I am getting a pop up screen titled "Add Developer".
In that screen, asking for Access Key.. Also , You are not registered as Developer. Please register in the OSS.In OSS you will get Access Key..
      I tried lot , but unable to solve it.. Please give me the detailed solution for this..
     Thanks in Advance,
        Somu

Please enter the following code as your developer key for the Sneak Preview NSP system.
29671482393151224771
Regards,
Rich Heilman

Developer key, Access key and OSS key

Hi Experts
When i am trying to create a z programs it is asking Access key.
Can anybody please tell what is Developer key, Access key and OSS key and difference among them.
Thanks in advance
Sekar

Hi,
There is no need to pay for developer key or object access key. You can get them from service market place under Keys & Request tab and SSCR. You need to have a valid S-User with proper authorization to generate the keys. Below is the link for the same where select the Keys & Request and under that SSCR Keys. Then from there you can generate Developer and object access keys.
https://websmp209.sap-ag.de/support
Regards,
Sharath

Regarding access key for modify predifined fm in SAP IDES System

hai to all,
How can i find
access key for modify predifined fm in SAP IDES System
i have sap 4.7 dump(IDES)
please give reply asap.
thanks in advance,
regards,
surya.

Hi Chandran,
Thank you for the reply,
how can i access this site, its asking username password,
i didn't have both of these and even i'm unable to register also.
how can i access.
please respond
regards,
surya.

Regarding access key

hi
I have a Question regarding Access key.actually I wanted to
whenever we change different objects its asking different
access key...say frankly
for Mara its asking different acess key then
I observed Abap'rs are trying to insert a object PatternD
so in this step its again asking Access key.so my doubt is
do I need to request SAP portal for another acess ..plz do
revert if any one knows the answer
Thank you

Hi
Yes, access key is required for editing object, and for different objects it will ask different access keys. So , you need to apply for access key at marketplace, each time.
Hope this helps you.
Regards
Rahul

Developer key, Access key, OSS key

Hi Experts
When i am trying to create a z programs it is asking Access key.
Can anybody please tell what is Developer key, Access key and OSS key and difference among them.
Thanks in advance
Sekar

The developer key is a combination of you installation number, your license key (that you get from http://service.sap.com/licensekey) and the user name
Object Access key - This key will be available in service.sap.com and is for modifying the standard SAP Objects
OSS Are Sap Notes
you can check this links to obtain more info.
what is the exact use of OSS notes?
http://www.sap-img.com/basis/interview-questions-for-sap-basis.htm
Diff b/w developer's key & access key

Getting the Object Access key

This weird question,
But does any one know how to get the object access key for Standard SAP object is changed..
Normally when we try to do any modification on Standard SaP object it asks for and access key.. We need to enter it once, after which the object is open for editing.
I have an SAP object which as been modified .
I want to know that number?? Is it possible..
Any help will be highly appreciated..
Regards,
Samir.

Hi Samir,
You have to contact SAP Support to obtain the access key for a Standard SAP Object. The correct channel for that is the OSS, where yo can raise a message requesting the same.
But you are saying that there's one object that has already been modified. Who has done the modification ? When they have done it, they must have specified the access key. If you want to modify the same object, then the best thing for you to do is to contact the person who has changed it.
By the way, have the modifications been done using the Modififcation Assistant?
Regards,
Anand Mandalika.

Developer access key question

Hello,
I am trying to create some domains per a OSS note. the domains are FILE_APPL and FL_EXTN. when I create the first domain, the system prompted me for the developer access key. The BASIS person sent me the key and I entered and created the first domain. I am trying to create the second domain and again it asked me for the developer access key. I typed the same number and I am getting a "incorrect entry" box. when I clicked on the information button, it states that I should only have to enter this key once.
why does the invalid entry box appear when I am entering the same key?
why do I have to enter the key again?
am I doing something wrong in the process?
thanks in advance for the help

Basically, if you are referring to a developer key, you only have to enter this once, but if you are referring to an object registration key, then these are specific to each object, which would be the reason why the key doesn't work for the second object. It appears that the first is ok, so you now need a second object registration key for the second domain, have your basis person register this object and get the other key.
Read the dialog carefully, it probably says about registering the object and not entering the developer key.
Regards,
Rich Heilman

Zugangsschluessel - access key

Hello,
I am currently trying my first ABAP programmer steps in IDES.
Unfortunately I am not getting to the acctual entry mask.
After having typed "SE38" into the command field, having named the programm
selected Attributes and then clicked on Create. I receive an error mssage that reads as follows:
"You are not registered as a developer. Please register in the R/3 Online Service System (OSS). You will receive an access key upon registration."
Can anybody tell me where I can get this access key or onto which site I have to log on to to generate it?
Sorry if the translation is insufficent as I work from the German system.
Thanks very much for your help,
Claudia Erb

Hi Claudia,
Willkommen in SDN!!!!!!
With the IDES u will get Developer Key or Access KEY..
or may be u given the program name starts from A - W.
Program muss beginn mit Y oder Z.
If you did it then check your IDES software package for access key. Or call the customer service.
Regards
SAB

Where to enter developer access key

Hello gurus,
By logging on through the OSS login have created developer key. But how to register it with the R/3??? Which is the T-code and what are the steps involved???
Thanks and Regards,
Rahul

Hi Rahul,
First i requested you to get in touch with ABAP moulde lead and get confirmation
mail from customer, then only we can create Developer Access key.
Procedure explains how to obtain a developer key:
a) Log into OSS.
b) Click on the Registration button and then click the Register Developer button.
c) Select appropriate customer installation.
d) Enter the user ID in the user box,.
e) Click on the Register button.
f) Copy the KEY (by highlighting and using ctrl/c for copy and ctrl/v for paste) and email the user
of his key. The ctrl/c, ctrl/v ensures that the complete key is copied since it is a very long
number.
g) Click the Cancel button when done or click the Register button to register another developer.
h) Click the green '¬ ' to exit.
Thanks.

Regarding oss access key

Similar Messages

Maybe you are looking for