Regarding output statements

Hello experts,
                        i want to know the use of the following statements.
can anyone give a example and explain these types of output statements.
                                Write:/P sy-uline.
          Write:/P sy-uline(L).
          Write:/P(L) sy-uline.
          Uline.
          Uline /P.
          Uline /P(L).
thanking u all.
regards,
sanjay

Hi,
First you know the syntax of WRITE statement.
WRITE:
Displays lists.
Syntax:
WRITE [AT [/][<pos>][(<len>)]] <f> [AS CHECKBOX|SYMBOL|ICON|LINE]
[QUICKINFO <g>].
[<format>]
The contents of the field <f> are formatted according to their data type and displayed in the current list. . The additions before the field allow you to specify a line break, the starting position, and the length of the field. The additions after the field allow you to display checkboxes, symbols, icons, and lines. The <format> addition can contain various other formatting options. The QUICKINFO addition allows you to assign a tool tip <g> to the field.
REgards,
Bhaskar

Similar Messages

Regarding case statement and decode function

Hi Experts,
I have question.....regarding case statement and decode statement....
Can you please explain me that which one will be efficient,to place in insert statement...
insert statement(
(case when ........then
                     case when ....then
                     else
                     end)
else
end)
or
insert statement(
case when.....then
decode(....)
else
end)
Can you people explain me which one is more efficient method?
Thanks in advance.......

The are major differences to talk about in case of CASE vs DECODE, but performance wise both are pretty much the same.
Have a look at Tom's thread
Ask Tom &quot;better performance - case or decode&quot;
I would suggest to use CASE whenever possible. Don't worry about the performance part.

How to read back the output state for digital output or anlog output ?

I use NI-pci 6221(68PIN) Accquistion card to do measurmet,after i do digital output ,or anlog output ,I find that the output will be maitained by the card.even after i exit my accquistion program.But if i reset the card ,the ouptut also will be reset.
Now if i don't reset the card ,how can i read back the output state,?

Hi Mike,
There is no way for you to internally route an analog output to an analog input. The only solution is to physically connect the two lines together with a wire.
I came to this conclusion through the following steps:
1- Start MAX and select the DAQmx device under "Devices and Interfaces>>NI-DAQmx Devices" that you want to internally route signals through.
2- Click on the "Device Routes" tab on the bottom of the right hand window (It defaults to the "Attributes" tab)
3- Line up the Source with the Destination to see if the connection can be internally routed (either direct or indirect)
I came to the above conclusion by following these steps for a PCI-6251 DAQ device (the analog output & input do not exist in the "Device Routes" tab therefore they do not support internal routing), but you should verify this for your specific hardware. Let me know if you have any other questions/concerns.
Cheers,
Jonah Paul
Applications Engineer
National Instruments
Jonah Paul
Marketing Manager, Embedded Software
Evaluate the LabVIEW RIO Platform! - ni.com/rioeval

Regards catch statement

Is there any thing worng in my catch statements .because when i do debug the curser not catching the catch statements
TRY.
       CALL METHOD z_co_ifoasy_01_sa_gl=>execute_asynchronous
          EXPORTING
            output = gv_zsafe_mt_acc_gl_posting01.
      CATCH cx_ai_system_fault INTO s_exception.
      CATCH cx_ai_application_fault INTO s_exception_app.
    ENDTRY.
   IF ( s_exception IS INITIAL AND s_exception_app IS INITIAL )
      MESSAGE i007.
    ELSE.
      PERFORM update_log_table.
      COMMIT WORK.
      MESSAGE i009. "Message sent to XI".
    ENDIF.
ENDIF.

hi,
    What type of Exceptions you want to catch in Proxy?
     Try to do commit work before you read exception variables for text and code.
Follow this process:
Proxy call
catch exception
commit work.
Use Exception variale to read details.
If you want to check that RFC Destination that pings your PI server is fine or not.
Call FM: BDL_SERVER_PING
to check if your PI server is down.
Regards,
Anurag Garg

Regarding SUBMIT statement - to process a program in background

Hi All,
I have issue of submitting a program in background and also i need to process the no of records come from program by splitting them by 1000(n).
First of all i have program whose code is like following:
REPORT z_update_material_master.
TYPES: BEGIN OF t_marc,
 matnr LIKE marc-matnr, "Material Number
 werks LIKE marc-werks, "Plant
 beskz LIKE marc-beskz, "Procurement Type
 sobsl LIKE marc-sobsl, "Special procurement type
 fhori LIKE marc-fhori, "Scheduling Margin Key for Floats
 dzeit LIKE marc-dzeit, "In-house production time
 plifz LIKE marc-plifz, "Planned delivery time in days
 webaz LIKE marc-webaz, "Goods rcpt processing time
 pwwrk LIKE t460a-wrk02, "Production plant in planned order
 erhor LIKE t436a-erhor, "Opening periodr
 zlt TYPE p DECIMALS 3, "Total replenishment lead time
 ztlt TYPE p DECIMALS 3, "Total replenishment lead time
 wzeit TYPE p DECIMALS 3, "Total replenishment lead time
 upd(1) TYPE c, "UPDATE INDICATER
 ind TYPE c,
 END OF t_marc.
DATA: i_marc TYPE SORTED TABLE OF t_marc INITIAL SIZE 0
 WITH HEADER LINE
 WITH NON-UNIQUE KEY matnr werks,
 i_marc_rpt LIKE i_marc OCCURS 0 WITH HEADER LINE.
DATA: l_plantdata LIKE bapi_marc,
 l_headdata LIKE bapimathead,
 l_plantdatax LIKE bapi_marcx,
 l_tabix LIKE sy-tabix.
CONSTANTS: c_s TYPE c VALUE 'S',
 c_x TYPE c VALUE 'X'.
DATA i_temp_bapi_return LIKE bapi_matreturn2
 OCCURS 0 WITH HEADER LINE.
DATA BEGIN OF i_temp_zppe0091_01 OCCURS 0.
 INCLUDE STRUCTURE zppe0091_01.
DATA: END OF i_temp_zppe0091_01.
DATA: l_tab_nam LIKE rstable-tabname VALUE 'ZPPE0091_01'.
SELECT * FROM zppe0091_01
 INTO CORRESPONDING FIELDS OF TABLE i_temp_zppe0091_01.
IF sy-subrc EQ 0.
LOOP AT i_temp_zppe0091_01 WHERE upd = c_x.
 l_tabix = sy-tabix.
 l_headdata-material = i_temp_zppe0091_01-matnr.
 l_plantdata-plant = i_temp_zppe0091_01-werks.
 l_plantdata-replentime = i_temp_zppe0091_01-wzeit.
 l_plantdatax-replentime = c_x.
 CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
 EXPORTING
 headdata = l_headdata
 plantdata = l_plantdata
 plantdatax = l_plantdatax
 TABLES
 returnmessages = i_temp_bapi_return.
 IF NOT i_temp_bapi_return[] IS INITIAL.
 READ TABLE i_temp_bapi_return WITH KEY type = c_s.
 IF sy-subrc EQ 0.
 i_marc_rpt-matnr = i_temp_zppe0091_01-matnr.
 i_marc_rpt-werks = i_temp_zppe0091_01-werks.
 APPEND i_marc_rpt. CLEAR i_marc_rpt.
 ELSE.
 i_temp_zppe0091_01-upd = space.
 MODIFY i_temp_zppe0091_01 INDEX l_tabix TRANSPORTING upd.
 ENDIF.
 ENDIF.
ENDLOOP.
ENDIF.
Now i want to call this program from another program that is already exists by using SUBMIT
statement in background and i need to process this program by dividing records by 1000 into seperate session.
how can i do it. Can any body tell me the solution with syntax.
I might get lot of records from above program so i want to split them into diffrent sessions based on number of records(1000).
can any body give me the solution.
Thanks in advance.
Thanks & Regards,
Rayeez.

Try implementing the following code. Use the code accordingly...
MOVE 100 TO c_recs_b4_split.
IF num_src_trans > c_recs_b4_split.
 target_break = num_src_trans / p_thread.
ELSE.
 target_break = num_src_trans + 1.
ENDIF.
wa_subbch = 1.
last_index = 1.
No batch split required if total recrods less than 100
IF num_src_trans < c_recs_b4_split.
 CLEAR : range_btch.
 REFRESH: range_btch.
 IF wa_subbch = p_thread.
 target_break = num_src_trans.
 ENDIF.
 MOVE 'S_SRCTRN' TO range_wa-selname.
 MOVE 'S' TO range_wa-kind .
 MOVE 'I' TO range_wa-sign .
 MOVE 'EQ' TO range_wa-option .
 LOOP AT itab_src_trans INTO st_src_trans.
 MOVE st_src_trans-src_tran_id TO range_wa-low.
 APPEND range_wa TO range_btch.
 ENDLOOP.
Step 3 Submit the batch.
 v_job_no = v_job_no + 1.
 PERFORM submit_tp_jobs.
ELSE.
 DO.
Step 1 Collect data for the target count
 CLEAR : range_btch.
 REFRESH: range_btch.
 IF wa_subbch = p_thread.
 target_break = num_src_trans.
 ENDIF.
 MOVE 'S_SRCTRN' TO range_wa-selname.
 MOVE 'S' TO range_wa-kind .
 MOVE 'I' TO range_wa-sign .
 MOVE 'EQ' TO range_wa-option .
 IF wa_subbch = p_thread.
 target_break = num_src_trans - v_cnt .
 ENDIF.
 LOOP AT itab_src_trans INTO st_src_trans FROM last_index.
 last_index = sy-tabix.
 batch_total = batch_total + 1.
 IF batch_total <= target_break.
 MOVE st_src_trans-src_tran_id TO range_wa-low.
 APPEND range_wa TO range_btch.
 ELSE.
 EXIT.
 ENDIF.
 v_cnt = v_cnt + 1.
 ENDLOOP.
 CLEAR batch_total.
Step 2 Submit the batch.
 v_job_no = v_job_no + 1.
 PERFORM submit_tp_jobs.
 ADD 1 TO wa_subbch.
 IF wa_subbch > p_thread.
 EXIT.
 ENDIF.
 ENDDO.
ENDIF.
FORM submit_tp_jobs .
DATA : l_jobcount LIKE tbtcjob-jobcount,
 l_jobrelease LIKE btch0000-char1,
 w_job_flag VALUE 'X',
 w_process_mode,
 w_user_print_params LIKE pri_params.
l_jobname = p_batch.
CONCATENATE 'TP_' l_jobname '_' v_job_no INTO l_jobname.
CONDENSE l_jobname NO-GAPS.
w_process_mode = ' '.
IF NOT range_btch[] IS INITIAL.
 PERFORM create_post_ctrl.
 CALL FUNCTION 'JOB_OPEN'
 EXPORTING
 jobname = l_jobname
 IMPORTING
 jobcount = l_jobcount.
 SUBMIT zfi_pc_tran_proc
 AND RETURN
 WITH p_batch = p_batch
 WITH p_jobid = p_jobid
 WITH p_mode = w_process_mode
 WITH p_subbch = wa_subbch
 WITH p_jobq = p_jobid
 WITH p_cntlmt = p_cntlmt
 WITH p_tpiop = p_iop
 WITH SELECTION-TABLE range_btch
 USER sy-uname
 VIA JOB l_jobname NUMBER l_jobcount
 TO SAP-SPOOL
 SPOOL PARAMETERS w_user_print_params
 WITHOUT SPOOL DYNPRO.
 CALL FUNCTION 'JOB_CLOSE'
 EXPORTING
 jobcount = l_jobcount
 jobname = l_jobname
 strtimmed = 'X'
 IMPORTING
 job_was_released = l_jobrelease
 EXCEPTIONS
 cant_start_immediate = 1
 invalid_startdate = 2
 jobname_missing = 3
 job_close_failed = 4
 job_nosteps = 5
 job_notex = 6
 lock_failed = 7
 invalid_target = 8
 OTHERS = 9.
ENDIF.
ENDFORM. " submit_tp_jobs
Pl. add the points....

Regarding types statement in ECC 6.0...plz reply..urgent

Hi,
I am copying a program which is in 4.7 to ECC 6.0,i am facing error regarding structures with types...
The following code in 4.7
DATA:BEGIN OF W_BMM00.
 INCLUDE STRUCTURE BMM00.
DATA:END OF W_BMM00.
DATA:BEGIN OF W_BMMH1.
 INCLUDE STRUCTURE BMMH1.
DATA:END OF W_BMMH1.
DATA:BEGIN OF W_BMMH7.
 INCLUDE STRUCTURE BMMH7.
DATA:END OF W_BMMH7.
DATA : BEGIN OF TAB_TLINE OCCURS 0.
 INCLUDE STRUCTURE TLINE.
DATA : END OF TAB_TLINE.
i have written the same in ECC6.0 as below
TYPES:BEGIN OF tw_bmm00.
 INCLUDE STRUCTURE bmm00.
TYPES:END OF tw_bmm00 ,
 tt_bmm00 TYPE STANDARD TABLE OF tw_bmm00.
TYPES:BEGIN OF tw_bmmh1.
 INCLUDE STRUCTURE bmmh1.
TYPES:END OF tw_bmmh1 ,
 tt_bmmh1 TYPE STANDARD TABLE OF tw_bmmh1.
TYPES:BEGIN OF tw_bmmh7.
 INCLUDE STRUCTURE bmmh7.
TYPES:END OF tw_bmmh7 ,
 tt_bmmh7 TYPE STANDARD TABLE OF tw_bmmh7.
TYPES:BEGIN OF tw_TAB_TLINE.
 INCLUDE STRUCTURE TLINE.
TYPES:END OF tw_TAB_TLINE,
 tt_tab_tline TYPE STANDARD TABLE OF tw_tab_tline.
lw_bmm00 TYPE tw_bmm00,
 lt_bmm00 TYPE tt_bmm00,
 lw_bmmh1 TYPE tw_bmmh1,
 lt_bmmh1 TYPE tt_bmmh1,
 lw_bmmh7 TYPE tw_bmmh7,
 lt_bmmh7 TYPE tt_bmmh7,
 lw_tab_thead TYPE tw_tab_thead,
 lt_tab_thead TYPE tt_tab_thead,....
when i check SLIN errors i am getting the following errors...plz resolve..
The current ABAP command is obsolete
Within classes and interfaces, you can only use "TYPE" to refer to ABAP Dictionary
types (not "LIKE" or "STRUCTURE").


include strture not allowed.
rules.
ABAP Development under Unicode
Prior to Unicode the length of a character was exactly one byte, allowing implicit typecasts or memory-layout oriented programming. With Unicode this situation has changed: One character is no longer one byte, so that additional specifications have to be added to define the unit of measure for implicit or explicit references to (the length of) characters.
Character-like data in ABAP are always represented with the UTF-16 - standard (also used in Java or other development tools like Microsoft's Visual Basic); but this format is not related to the encoding of the underlying database.
A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or a NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
Other Changes
1. Bit Statements
2. Adding Field Sequences
3. Loops with VARY and VARYING
4. Creating Subroutines
5. Saving Programs
6. Assigning Types for GET/SET PARAMETER
7. Unreachable Statements
8. Function Modules with Incorrect Parameter Names
1. Bit Statements
Previously, the system checked for the bit statements SET BIT i OF f [TO g] and GET BIT i OF f [INTO g]whether the field f is character-type; X fields, X strings, and flat structures are usually regarded as character-type. For Unicode programs this is no longer useful, because the types X and XSTRING no longer count as character-type and the bit by bit access to character-type fields or structures is no longer platform-independent. Therefore, with these operations in Unicode programs, the field f must be type X or XSTRING.
For the bit mask operations f O x, f Z x, and f M x you could previously use all number-type and hence all character-type types for the left operand f. In Unicode programs, the f operand must now be type X or XSTRING.
2. Adding Field Sequences
When adding field sequences, restrictions apply to the following statements in Unicode:
ADD n1 THEN n2 UNTIL nz [ ACCORDING TO sel ] GIVING m ...
ADD n1 THEN n2 UNTIL nz TO m [ RANGE str ].
1. The operands n1, n2, and nz must be type-compatible with one another.
2. The distance between nz and n1 must be an integral multiple of the distance between n2 and n1.
3. A syntax or runtime error occurs if the fields n1, n2, and nz are not in a structure. This structure must be recognizable statically or its valid area must be marked explicitly using the RANGE addition.
4. At runtime, the system ensures that the RANGE area is not left.
ADD n1 FROM i1 GIVING m [ RANGE str ].
1. Field n1 must be within the structure. The structure must be explicitly defined using the RANGE addition if it is not recognizable statically.
2. For this variant, the system also checks at runtime whether n1 and the addressed values are within the structure.
3. Loops
Loops with the VARY or VARYING addition are also problematic in Unicode, since a type-a access to memory contents cannot be ensured and memory can be overwritten inadvertently.
DO ... VARYING f FROM f1 NEXT f2.
For this statement, the fields f, f1, and f2 must be type-compatible with each other. To prevent memory contents being overwritten, a RANGE for valid accesses is introduced implicitly or explicitly for the following statements:
DO ... TIMES VARYING f FROM f1 NEXT f2 [ RANGE f3 ].
WHILE ... VARY f FROM f1 NEXT f2 [ RANGE f3 ].
A syntax or runtime error is caused if f1 or f2 are not included in f3. If the RANGE addition is missing, it is defined implicitly from FROM f1 NEXT f2 as follows:
1. If both f1 and f2 are statically recognizable components of the same structure, the valid RANGE area is defined from the smallest structure that comprises f1 and f2.
2. A syntax error is triggered if it is recognizable statically that f1 and f2 are not part of the same structure.
3. A valid area must be defined explicitly using the RANGE addition if the connection between f1 and f2 is not recognizable statically.
If you specify a deep structure as the RANGE addition, the system checks for every loop pass that there are no field references, object references, tables, or strings in the area read.
4. Creating Subroutines
When automatically generating subroutines using the statement GENERATE SUBROUTINE POOL itab NAME name, the generated program inherits the content of the Unicode flag of the generating program.
5. Saving Programs
When automatically generating programs using the statement INSERT REPORT prog FROM itab, default values are set for the TRDIR entry as before. Amongst other things, this statement has the new addition UNICODE ENABLING uc, with which the Unicode flag of the inserted report receives the value of uc. If this addition is missing, the following applies:
1. A Unicode program creates a Unicode program.
2. A non-Unicode program in turn creates a non-Unicode program.
3. A non-Unicode program becomes a Unicode program if it is overwritten by a Unicode program.
4. A Unicode program remains a Unicode program if it is overwritten by a non-Unicode program.
6. Assigning Types for GET/SET PARAMETER
For the statements GET PARAMETER ID pid FIELD f and GET PARAMETER ID pid FIELD f, f must be character-type. You can use the EXPORT and IMPORT statements for storing non-character-type fields and structures.
7. Unreachable Statements
In Unicode programs, unreachable statements cause a syntax error. In non-Unicode programs, there was previously only a syntax warning.
8. Function Modules with Incorrect Parameter Names
In Unicode programs, calling a function module, whose parameter names are specified statically as a literal or constant, causes an exception that can be handled if an incorrect parameter name was specified. This only applies to function modules that are not called via Remote Function Call. In non-Unicode programs, an incorrect name was previously ignored.
http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
--> mySAP ERP 2005
--> Upgrade
--> Upgrade Documentation - mySAP ERP 2005 SR2
There choose your database and operating system.
If you're looking for functional details check
http://service.sap.com/releasenotes

Regarding LOOP Statement in ABAP

Hi,
I have small question regarding LOOP ..... ENDLOOP statement against SY-SUBRC Check.
I have a loop as below:
 LOOP AT i_vbap WHERE vbeln = i_vbak-vbeln.
 Some Code
 ENDLOOP.
 IF sy-subrc <> 0.
 APPEND i_sdata.
 CLEAR i_sdata.
 ENDIF.
Is the above Code/Syntax is correct one.
Can we use SY-SUBRC Check against LOOP ... ENDLOOP statement.
Is this the right way of writing the code as per standards.
Can anybody give sujjestions regarding the same.
Thanks in advance.
Thanks & Regards,
Prasad.

Hi Prasad,
Yes, you could use sy-subrc after the endloop. For example:
loop at itab1 where kunnr = itab2-kunnr.
some conditions...
endloop.
if sy-subrc = 0.
write: 'Success!'.
else.
leave program.
endif.
if you press F1 while highlighting the LOOP statement here are the meaning of sy-subrc in loop...endloop.
SY-SUBRC = 0:
At least one loop pass was processed.
SY-SUBRC = 4:
The loop was not processed because the table contains no entries or no entries satisfied the conditions.
Regards!

Regarding Bounds Statement in ABAP HR

Hi Guys!!!!
I have been trying to work on provide, end provide in an HR program and then when I went into f1 of the statement I found an simple provide,end provide which I am pasting here:
PROVIDE FIELDS col3 FROM itab1 INTO wa1
                               VALID flag1
                               BOUNDS col1 AND col2
        FIELDS col3 FROM itab2 INTO wa2
                               VALID flag2
                               BOUNDS col1 AND col2
        BETWEEN 2 AND 14.
Now, I am really not able to understand the meaning of BOUNDS here, What does it actually do?? Could someone please explain. I searched in SCN and could not find any apt reply actually.
Regards,
Vishwa.

hi,
PROVIDE FIELDS {*|{comp1 comp2 ...}}
               FROM itab1 INTO wa1 VALID flag1
               BOUNDS intliml1 AND intlimu1
               [WHERE log_exp1]
        FIELDS {*|{comp1 comp2 ...}}
               FROM itab2 INTO wa2 VALID flag2
               BOUNDS intliml2 AND intlimu2
               [WHERE log_exp2]
        BETWEEN extliml AND extlimu
        [INCLUDING GAPS].
ENDPROVIDE.
To be able to process internal tables using PROVIDE, all tables itab1 itab2 ... must be fully typed index tables and contain two special columns that have the same data type (d, i, n, or t) for all relevant tables. For every table you must specify the names intliml1 intliml2 ... and intlimu1 intlimu2 ... of these columns using the addition BOUNDS.
The columns intliml1 intliml2 ... and intlimu1 intlimu2 ... in every row of the relevant internal tables must contain values that can be interpreted as limits of closed intervals. Within a table, the intervals specified in these columns must not overlap and must be sorted in ascending order. The intervals therefore make up a unique key for every row.
Regards,
Arjun.

Can I use an adapter with the output stats: 5.2 volt and 1.0 amp for my iPod Touch 4g?

Hello, I bought an iPod touch from apple store. I got the cable with one part to the iPod and the other USB. But i didn't get an adapter to make it possible to connect the USB to an adapter and then into the wall jack.
So I had one at home with these stats: 5.2 volt and 1.0 amp. Can I use it to charge the iPod Touch or is it "unhealthy" for the battery?
Kind Regards
Kiwiii

It shuld be fine. It is within the tolerance for USB 5 Volts.

Regarding select statement

Hi Expert,
Is this select statement is ok ?
actually i have doubt in where clause when it mix both AND and OR without braces
SELECT SINGLE * FROM vbfa WHERE
             vbeln = s_bkpf-awkey AND
               vbtyp_v = 'C'   OR
               vbtyp_v = 'E'   OR
               vbtyp_v = 'M' OR
               vbtyp_v = 'J'   OR
               vbtyp_v = 'R' .
thanks and regards
abaper.

SELECT SINGLE * FROM vbfa WHERE
vbeln = s_bkpf-awkey AND ( vbtyp_v = 'C' OR
vbtyp_v = 'E' OR
vbtyp_v = 'M' OR
vbtyp_v = 'J' OR
vbtyp_v = 'R' ).
OR YOU CAN USE
SELECT SINGLE * FROM vbfa WHERE
vbeln = s_bkpf-awkey AND
vbtyp_v IN ('C', 'E', 'M', 'J', 'R') .
CHECK THE SPACE NO SPACE BETWEEN ('C' AFTER , ONE SPACE AND NO SPACE BETWEEN 'R'). GIVE THE SPACE CORRECTLY ...
REGARDS
SHIBA DUTTA

Comment regarding new statement of direction

Hi all,
I've just read the new statement of direction regarding Oracle Workflow (http://www.oracle.com/technology/products/ias/workflow/workflow_sod.html). Especially regarding the standalone version it is a great pitty that Oracle will kick such a good and stable product into the garbage can.
I'm not convinced that BPEL can replace Oracle Workflow. Also I'm missing a real migration path. It's not only Workflow that needs to be re-implemented. For example our custom application would have be to re-implemented as well because Workflow is one of the central components.
So if I read "In addition, Oracle are now recommending that customers who have Oracle Workflow workflows in development or production that they plan to continue to enhance in the future should begin re-implementing those in BPEL." or "While there will be some development costs associated with the migration of existing processes from Oracle Workflow to Oracle BPEL Process Manager..." this brings me to some critical thaughts about the future of our custom application.
What are your thaughts and comments?
Best regards
Matthias

They also removed the entry about charting (Charting - Provide for chart rendering without using Flash (to enable display on mobile devices).)... Guess this will be in the next release (4.2) or next MAJOR release (5.0??)..
Thank you,
Tony Miller
Webster, TX
On the road of life...There are 'windshields', and there are 'bugs'
(splat!)
"Squeegees Wanted"
If this question is answered, please mark the thread as closed and assign points where earned..

Regarding SUBMIT Statement

Hi,
I am calling a batch job (B) (in back groung) using SUBMIT statement, from a report program (Say A). But I have to Pass some internal tables and few variable to the Batch job (B).
Can someone tell me how I can pass the Internal tables and variables ? Is it possible to pass through SUBMIT statement only? Is there some other than the use of Import-Export statement?
Thanks and regards,
Pankaj Bist.

Hi pankaj,
SUBMIT <PROGRAM NAE> = ds_name " Creating batch input session
 WITH fl_check = fl_check
 WITH os_xon = os_xon
 WITH xnonunic = xnonunic
 WITH callmode = callmode
 WITH max_comm = max_comm
 WITH pa_xprot = pa_xprot
 WITH anz_mode = anz_mode
 WITH update = update
 WITH xpop = xpop
 WITH xlog = xlog
 WITH xinf = xinf AND RETURN.
u can pass the variables like this.
the variables which i have pass to the program all are the selection screen aprameteers of the program .
I hope this will work for you.
Thanks,

Regarding select statement on structure

hi,
can we write select on structure?.........i hav to get condition record from konv(which is a structure) based on ekpo-ebeln.
for this i hav written code like this
IF NOT it_ekpo IS INITIAL.
    SELECT knumv
           kposn
           kschl
           kbetr
           waers
           KWERT
      FROM konv
      INTO TABLE it_konv
       FOR ALL ENTRIES IN it_ekpo
      WHERE knumv = it_ekpo-ebeln
        and kposn = it_ekpo-ebelp
        AND ( kschl EQ 'ZPF3' OR kschl EQ 'ZVAT'
            OR kschl EQ 'ZCSR' OR kschl EQ 'ZFR3' ).
    IF sy-subrc EQ 0.
      SORT it_konv BY knumv kposn.
    ENDIF.
ENDIF.

Hi
You cannot write the Select statement on Structures but yo have a table for that structure where you will get the same data.
You can use komv & konp table instead of structure .
IF NOT IT_EKPO IS INITIAL.
SELECT KNUMV
         KPOSN
         KSCHL
         KBETR
         WAERS
         KWERT
         FROM KONV
         INTO TABLE IT_KONP
         FOR ALL ENTRIES IN IT_EKPO
         WHERE KNUMV = IT_EKPO-EBELN
         AND ( KSCHL EQ 'ZPF3' OR KSCHL EQ 'ZVAT'
         OR KSCHL EQ 'ZCSR' OR KSCHL EQ 'ZFR3' ).
ENDIF.
Thanks & regards,,
Dileep .C

Regarding collect statement - Production report

Dear Experts,
I've the following requirement
A ) I'm creating a ALV report from Z table where i want the summary of the qty across different processing type like CT , ST , WS & FG .
B ) For each processing types i want the total qty to be displayed in different columns.
C ) When i'm trying to execute , no data is displaying..
Piece of coding is as below.. Request help to clear the below issue..
REPORT ZPP_PRD_REPORT.
TABLES : ZPP_ACTUAL_PRD.
TYPES : BEGIN OF TY_ACTUAL_PRD,
 KDAUF TYPE KDAUF,
 KDPOS TYPE KDPOS,
 WERKS TYPE WERKS_D,
 PROCTYP TYPE ZDE_PP_PROCTYP,
 AUFNR TYPE AUFNR,
 MEINS TYPE MEINS,
 END OF TY_ACTUAL_PRD.
 TYPES : BEGIN OF TY_FINAL,
 KDAUF TYPE KDAUF,
 KDPOS TYPE KDPOS,
 WERKS TYPE WERKS_D,
 PROCTYP TYPE ZDE_PP_PROCTYP,
 AUFNR TYPE AUFNR,
 MEINS TYPE MEINS,
 END OF TY_FINAL.
 DATA : GT_ACTUAL_PRD TYPE TABLE OF TY_ACTUAL_PRD,
 GS_ACTUAL_PRD TYPE TY_ACTUAL_PRD,
 GT_ACTUAL_PRD_COLLECT TYPE TABLE OF TY_ACTUAL_PRD.
 DATA : GT_FINAL TYPE TABLE OF TY_FINAL,
 GS_FINAL TYPE TY_FINAL.
 DATA : GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 GS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
 DATA : GT_EVENTS TYPE SLIS_T_EVENT.
 DATA : GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
 DATA : GS_REPID LIKE SY-REPID.
SELECT-OPTIONS : S_KDAUF FOR ZPP_ACTUAL_PRD-KDAUF,
 S_KDPOS FOR ZPP_ACTUAL_PRD-KDPOS.
START-OF-SELECTION.
 PERFORM GET_DATA.
 PERFORM POPULATE_DATA1.
*& Form GET_DATA
* text
* --> p1 text
* <-- p2 text
FORM GET_DATA .
 SELECT
 KDAUF
 KDPOS
 WERKS
 PROCTYP
 AUFNR
 MEINS
FROM ZPP_ACTUAL_PRD INTO TABLE GT_ACTUAL_PRD WHERE KDAUF IN S_KDAUF AND
 KDPOS IN S_KDPOS.
ENDFORM. " GET_DATA
*& Form POPULATE_DATA1
* text
* --> p1 text
* <-- p2 text
FORM POPULATE_DATA1 .
 LOOP AT GT_ACTUAL_PRD INTO GS_ACTUAL_PRD.
 GS_FINAL-KDAUF = GS_ACTUAL_PRD-KDAUF.
 GS_FINAL-KDPOS = GS_ACTUAL_PRD-KDPOS.
 GS_FINAL-WERKS = GS_ACTUAL_PRD-WERKS.
 GS_FINAL-PROCTYP = GS_ACTUAL_PRD-PROCTYP.
 GS_FINAL-AUFNR = GS_ACTUAL_PRD-AUFNR.
 GS_FINAL-MEINS = GS_ACTUAL_PRD-MEINS.
 COLLECT GS_ACTUAL_PRD INTO GT_ACTUAL_PRD_COLLECT.
ENDLOOP.
ENDFORM. " POPULATE_DATA1
*& Form BUILD_FIELDCATALOG
* text
* --> p1 text
* <-- p2 text
FORM BUILD_FIELDCATALOG .
 GS_FIELDCAT-FIELDNAME = 'KDAUF'.
 GS_FIELDCAT-SELTEXT_M = 'SALESORDER'.
 GS_FIELDCAT-OUTPUTLEN = 10.
 GS_FIELDCAT-DO_SUM = 'X'.
 GS_FIELDCAT-NO_ZERO = 'X'.
 APPEND GS_FIELDCAT TO GT_FIELDCAT.
 CLEAR GS_FIELDCAT.
 GS_FIELDCAT-FIELDNAME = 'KDPOS'.
 GS_FIELDCAT-SELTEXT_M = 'SALESITEM'.
 GS_FIELDCAT-OUTPUTLEN = 10.
 GS_FIELDCAT-DO_SUM = 'X'.
 GS_FIELDCAT-NO_ZERO = 'X'.
 APPEND GS_FIELDCAT TO GT_FIELDCAT.
 CLEAR GS_FIELDCAT.
 GS_FIELDCAT-FIELDNAME = 'WERKS'.
 GS_FIELDCAT-SELTEXT_M = 'PLANT'.
 GS_FIELDCAT-OUTPUTLEN = 10.
 GS_FIELDCAT-DO_SUM = 'X'.
 GS_FIELDCAT-NO_ZERO = 'X'.
 APPEND GS_FIELDCAT TO GT_FIELDCAT.
 CLEAR GS_FIELDCAT.
 GS_FIELDCAT-FIELDNAME = 'PROCTYP'.
 GS_FIELDCAT-SELTEXT_M = 'TYPE'.
 GS_FIELDCAT-OUTPUTLEN = 10.
 GS_FIELDCAT-DO_SUM = 'X'.
 GS_FIELDCAT-NO_ZERO = 'X'.
 APPEND GS_FIELDCAT TO GT_FIELDCAT.
 CLEAR GS_FIELDCAT.
GS_FIELDCAT-FIELDNAME = 'AUFNR'.
 GS_FIELDCAT-SELTEXT_M = 'ORDER'.
 GS_FIELDCAT-OUTPUTLEN = 10.
 GS_FIELDCAT-DO_SUM = 'X'.
 GS_FIELDCAT-NO_ZERO = 'X'.
 APPEND GS_FIELDCAT TO GT_FIELDCAT.
 CLEAR GS_FIELDCAT.
 GS_FIELDCAT-FIELDNAME = 'MENGE'.
 GS_FIELDCAT-SELTEXT_M = 'QTY'.
 GS_FIELDCAT-OUTPUTLEN = 10.
 GS_FIELDCAT-DO_SUM = 'X'.
 GS_FIELDCAT-NO_ZERO = 'X'.
 APPEND GS_FIELDCAT TO GT_FIELDCAT.
 CLEAR GS_FIELDCAT.
ENDFORM. " BUILD_FIELDCATALOG
*& Form ALV_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM ALV_DISPLAY .
 GS_REPID = SY-REPID.
 IF GS_REPID IS NOT INITIAL.
 CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = GS_REPID
 IT_FIELDCAT = GT_FIELDCAT[]
 IT_EVENTS = GT_EVENTS[]
 I_SAVE = 'A'
 I_DEFAULT = 'X'
 TABLES
 T_OUTTAB = GT_ACTUAL_PRD_COLLECT
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 ENDIF.
ENDFORM. " ALV_DISPLAY
Z Data base table looks as below..
Best rgds/thnks,
Srikanth.

Hi Sankara ,
 Collect statement is used to add all the numeric components to the corresponding values of all the existing rows in an internal table , with the same key . The data type can be I , P , F .
 Please ensure that there is a comman value in all the rows .
 check this out and let me know if any issues
Regards,
Kavitha

Query regarding Concatenate statement functionality from ECC 6.0 to 46B ver

Hi,
I got new requirement ie I have to copy reports from ECC6.0 to 46B version. While copying I faced number of issues and I am not clear for below one.
concatenate i_result1-result p_delim into i_result1-result respecting blanks. ( this is in ECC6.0)
now my requirement is I have to use the same functionality in 46B version without respecting blanks the statement is working but I need the functinality of respecting blanks also.
Thanks in advance.
-Kumar.

Try like this in 46B:
concatenate i_result1-result p_delim into i_result1-result SEPARATED BY SPACE.
Regards,
Naimesh Patel

Regarding output statements

Similar Messages

Maybe you are looking for