Regarding PAN, TAN & TDS Circle

Hi all
Where to maintain the TAN, PAN & TDS Circle for the Co Code. This has to be printed in the TDS Certificate. Kindly help in this regard.
Regards
R.Karthigayan

Hi,
Please check in your TDS Certificate Print Program as to what fields are being used for TAN and Circle details.
We are currently using the "Search Term (SORT1)" field in the address of the "SECTION CODE" for TAN and "Street/House Number (STREET)" for the TDS circle. Our print program is standard.
For Vendors PAN details maintain the PAN in "J1ID" under Vendor Excise details option. This has been suggested by SAP.
Please let me know whether this works out or not.
Regards,
Swapnil

Similar Messages

Regarding PAN details updation through ESS

Hi ,
We have applied a new patch recently,
as follows:
SAP_HR - To patch - 49
EA_HR - To Patch - 49
When users are trying to update PAN details it says throwing error " fill in the required fields,"
i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
Can any body come accross this issue please give me solution as this issue has become critical.
Thanks in advance .
Regards,
Evani
Edited by: EVANI on Jan 6, 2010 10:58 AM

Hi
Firstly I assume you are on ECC 600 - however please do clarify if you are on earlier release or EHP
Please ensure you SP landscape matches recommendations in the following link
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
Best wishes
Stuart

API needed to import the customer PAN No, TAN NO in the India Localization

Hi,
We need to import the customer PAN No, TAN NO and etc.., in the India Localization (Additional Information).
Please assist me, is there any API available to import the above details.
If any, please provide me the API Name ASAP.
Regards
Suresh

Are you using (party or person) flexfields for PAN / TAN ?..
if yes you can use the standard hz_party_v2pub.create_person API by passing ATTRIBTUE1 , 2,3 columns you can populate corresponding field for PAN / TAN

Tds cycle mapping and testing

hi,
i have the problem regarding to the tds cycle,so pls inform about the total process of 'TDS CYCLE-MAPPING AND TESTING'
REGARDS
JANA

hai,
the following is the process to get the TDS certificate
TDS Certificate
1.EWT-Basic Settings-Check Recipient type-In-WHTYPE-Rectype-Text
1.Extended WHT Basic Setting-india-define business place- 1000
Enter 1000 as business place and enter description and fill address coloumn.
Assign Business Place to Country Calendar and Day After
Define Section code as 1000 and assign business place and fill address coloumn
Company
Leave on row as blank
Enter TDS circle
Enter TDS No of the company in Search Term ½ and after fillup the address and save it
Extended WHT Posting Certificate numbering for WHT
1.     Define Numbering Class
2.     Define Numbering Group
3.     Define Number Ranges
4.     Assign numbering Group Numbering class
1.Extended WHT Posting-India- Remittance Challan- Document Type
2.Maintain Number Group
Company code Business Area WHT Type Number Group
3.Maintain Number Range for 1,2,3,4,5 under----- text number range from 10001-99999
4.     Assign number range to number group 1-01,2-01,03-01,4-01,5-01
WHT tax certificate for Vendor & Customers
1.     Maintain Number Group and SAP script forms
Company code/Business Place/Offtake Key/form/No.Group
2.Maintain Number Range 2007 0001 -1000
3. Assign Number range to number groups
1-01,2-02 etc.
Pls assign points if it is useful.
Govind.

Acknowledgment No. Field not appearing in TDS Certificate

Hi Gurus,
While printing TDS certificate, there is not field for Acknowledgment No in the certificate.
In place of TDS Circle field, i need field for Acknowledgment No., please tell me how can we do it.
Thank YOu

Hi,
Please check the following notes
Note 1172387 - J1INCERT-To Maintain acknowledgement num w.r.t Form26Q/27Q
Note 1046758 - To display acknowledgement number in Form No 16A
Regards,
Jigar

AS per New Section 206AA for TDS

HI All,
Just wondering how we are mapping the new requirement for TDS for the new Sec 206AA
http://law.incometaxindia.gov.in/TaxmannDit/DispCitation/htmpage.aspx?fn=http://law.incometaxindia.gov.in/DitTaxmann/FinanceAct/FinAct20092/Finact69.htm
here the new section states that if the vendor doesnt have PAN Number TDS should be deducted to 20%
How can we map this?
Thanks
Best Regards
Shashi

Dear,
I have also faced this in different sections, I got it done through creating a new tax code and map it to vendor master.
This will require manual monitoring.......
There is no automated solution provided...
Regards,
Chintan Joshi

Errors with a TDS 1012 scope

Hello,
   I am having probelms with the example for the TDS 1012 scope that I got from the NI website. I have installed the drivers on the PC and I have assumed that that is all I need to do to have the example work.   I have attached a screen shoot of the error(s) that I am getting.
Regards
Kaspar
Regards,
Kaspar
Attachments:
TDS-1012_example error.pdf ‏191 KB

Hello,
   Ok, now I feel that I am starting to get somewhere. I have disconnected the scope probe from channel one of the scope, therefore there is no signal going to the scope, obviously no edge is presented to the scope, the scope therefore does not get triggered and no waveform should come out of the scope...but it does....why?
So if you run the edge example vi no errors come out of any vi and a waveform appears on the front panel.
   I initially thought that the timeout value was used to determine the duration that the read vi would wait until a edge ocurred on the scope input, which trigers the scope and then a waveform is generated by the scope and sent to the labview program. . It appears that the timeout value is only used to allow sufficient time for the waveform data to come out of the scope.
So why is a waveform being display on the front panel without any errors being generated when no trigger has been sent to the scope?
Regards
Kaspar
Regards,
Kaspar

New TDS requirement SAP note 1486147

Hello,
This is regarding the new TDS requirement for which SAP note 1486147 has to be implemented.
The problem is that we have implemented the note and also maintained entries in J_1I_SECCO_CIT as well as the entries in J_1IEWT_ACKN.
When we do the testing we are constantly getting one error " J1IN:016"
This error code is not defined in SE91.
If any one has handled such a scenario please let us know.
Regards

Hi,
Achnowledgement details comes in table it_qrtrtab at run time in the smartform, you can dibug the program j_1iewt_cert and smartforms J_1iewt_cert where at run time you will able to see data avaialability, If values are not available in this internal table then check related notes given by SAP, I have already implemented this note and also faced same issue but my FI consultant has given me the related note and my issue was resolved.
Please checkout related notes and data population in the dibugger.
Regards,
Umang Mehta

How To Freeze Text When Camera Is Panning

For a production project I am trying to incorporate text in a 30 second pan in a circle.
I was ondering if it was possible to freeze text so that the text appears on screen from the right and leave off the left part of the screen without following the camera. Not panning across the scree,
For example there is a railing intersection. One side of the railing I want text on top of the railing angled toward the intersection. The camera pans past it. The text doesn't move and goes off camera. Then, on the other side has the other half of the railing becomes visible the text is on top of that side and moves to the left and eventually off the screen once the camera moves beyond it.
Any help is apperciate.

That's something you do in After Effects...
http://forums.creativecow.net/thread/2/954699
http://www.videocopilot.net/blog/2008/06/matchmoving-primer/
http://www.youtube.com/watch?v=WcmnZ41Z4VA

Pan & Zoom "In"

Hi there,
I have a question regarding Pan & Zoom feature. I have observed we do not have a 100% control over it, but, anyway... maybe someone knows a trick to make it better!
1) When user activates pan&zoom in a page (touching it), the zoom is already 100%, so user has to zoom out. I think it doesn't make sense. As a user, I'd rather prefer to "zoom in" something which I would like to appreciate bigger. So... is there a way we could set up the pan&zoom frame to make the "opposite zooming"? Any 'tricks'?
Regards,
Clarissa

You might try using the free filter Quarter PIP.
For your purpose you should set Position to <manual> so you can position the PIP by keyframing the +Horiz Manual+ and +Vert Manual+ controls; this will drop the picture into the screen. In addition set +Full Size+ to 1 or some other value between 0 and 1: this will allow you to pan the picture within the PIP using the +Slip Horizontal+ and +Slip Vertical+ controls. Full Size allows to zoom into the picture up to 200% the original size.
Piero

I have cross dissolve transitions set between images and videos, and I have the pan/zoom hold setting at "0." Despite the "0" setting, my images are static until the cross dissol

I have cross dissolve transitions set between images and videos, and I have the pan/zoom hold setting at "0." Despite the "0" setting, my images are static until the cross dissolve is complete. I want the pan/zoom feature to start the moment the subsequent image becomes visible. Is there a solution?

tonyproam
I am not sure if I am zeroing in on what you seek so please clarify...on
I want the pan/zoom feature to start the moment the subsequent image becomes visible.
Do you mean fading in visible versus or completely visible at the end of the transition? Whatever the case, I have not
found a scenario to fit what you are describing.
However, here are my suggestions for you to consider...
1. What is the alignment of the Cross Dissolve transition - Left Clip, Between Clips, or Right Clip. If Between Clips, please try Left Clip alignment.
2. What is the duration of the Cross Dissolve transition - you could try varying the transition duration. If less than 1 second, then please read the
details for minimum transition duration in the following
http://atr935.blogspot.com/2014/03/pe-minimum-duration-for-transition.html
Please let me know if any of the above worked for you in what you were seeking regarding pan and zoom effect and video transitions.
Thank you.
ATR

Significance of Remittance Challan and Bank Challan in TDS

Dear Seniors,
Can anyone explain the significance of Remittance Challan and Bank Challan in TDS process.
Also, please give the overview of TDS process (just the outline) with sequence of steps (with accounting entries if possible).
Thanks in advance and Sincere Regards
Naveen

Hi Naveen,
TDS Remittance Challan (J1INCHLN) is for clearing TDS GL liability. At this time, TDS Account is debited and Bank Account or TDS Clearing/Vendor A/C is credited. Against all line items that got cleared at this time, an internal challan No. is generated and tagged to each line item in table With_item
After this you fill up the challan manually and send to bank based on the figures generated in J1INCHLN.
In J1INBANK, the Bank Challan No. gets updated against the Internal Challan No. here, no Accounting entry is posted but the table is updated and the name of the table is J_1IEXTCHLN.
After this the TDS certificates are generated in T-Code J1INCERT
Regards,
SAPFICO

How To Fix jumpy recordings when using video capture for pan shots

Loving this camera and its great video
HOWEVER - i have noticed lots of jerking and jumping when i have tried to move the camera while filming, and im not just reffering to shaky hand holding of camera, but rather lurches in the footage as i pan in a circle for eg (NO examples in above film, they are all to terrible to use). Any advice would be very welcome.
#AdviceNeeded

Here's a video demonstrating the glitches : http://www.youtube.com/watch?v=Op-5fIjxlkA
In this example the glitching happened a lot more when I was exporting the whole project (90 minutes long). The version without the glitching was created by copying just that section to a new project and exporting that.
I sent them to Compressor using the 'send to compressor' option in FCPX.
I had a similar thing the other day. I'd exported a project to Compressor as an h.426 file to upload to YouTube. When I watched it back it was fine, but I realised I wanted to cut some bits out.
I imported the h.264 file into FCPX and made the edits on that file, then sent to compressor again. It exported much more quickly, but the resulting file was full of glitches (like the the ones in the video).
I'm sure it just shouldn't be happening and it's driving me nuts.
Thanks,
Joe

Premier 12, Titles & Text, Current Time indicator, Pan & zoom

I am using Premier 12 and am really enjoying the program, I had been using Premier 8 and I am getting much fewer project crashes, in fact almost none! Whomever worked on this program did a really good job. I am also finding it very user friendly and have been using both the "quick" and the "expert" portions of the program. That said I have three questions,
Titles and text, I am using one with "scrolling credits", is there a function where I can either "freeze" the screen after it scrolls to the text OR is there a function to "replay" the text instead of just going "black" and stopping?
Also when I have added all of my clips onto the timeline and have my "curent time indicator" at the "end" it does not stop and "go back" to the beginning/home unless I manually hit the "home" on my keyboard. I want to make sure that when I go to burn that the movie will instantly go back to the beginning of the project.
Is is possible to do a type of "Ken Burns" panning and zooming with Premier 12 and if so how do you do it?
Thanks

AuroraAz
Good to learn of your progress with Premiere Elements 12.
3. Is is possible to do a type of "Ken Burns" panning and zooming with Premier 12 and if so how do you do it?
The Premiere Elements 8.0/8.0.1 Horizontal and Vertical Pan & Zoom choices in Presets are available in version 12 under fx Effects/Presets/. As in 8.0/8.0.1, in 12 it is either pan OR zoom applied to each clip, not pan AND zoom.
As in 8.0/8.0.1, in 12 there is the Motion Panel expanded and its Toggle Animation for doing more advanced pan and zoom effects. Here look to Applied Effects Tab/Applied Effects Palette/Motion Panel expanded for it Scale (for Zoom) and Position (Pan) properties.
The Pan and Zoom Tool is not found in version 8.0/8.0.1. It can be found in 12, Tools Menu/Pan and Zoom. The feature comes with its own workspace once you select the image and then the feature under Tools Menu. Note, when the panned and zoom image is returned to the Premiere Elements workspace from the Pan and Zoom workspace, the duration of the image is markedly increased. That is normal. Here is a sample of more information on the topic
online video tutorial on use of Pan and Zoom Tool
http://www.youtube.com/watch?v=YhLBAT_kLHs
my blog post on the subject, including applying same pan and zoom effect of Pan and Zoom Tool to more than one image at a time
http://www.atr935.blogspot.com/2013/05/pe11-pan-zoom-tool-more-than-one-photo.html
work in progress with gtavetian, regarding Pan and Zoom Tool and Portrait Oriented Images
http://forums.adobe.com/thread/1382933?tstart=60
2. Also when I have added all of my clips onto the timeline and have my "curent time indicator" at the "end" it does not stop and "go back" to the beginning/home unless I manually hit the "home" on my keyboard. I want to make sure that when I go to burn that the movie will instantly go back to the beginning of the project.
I am not sure that you are dealing with leftover beyond the left gray tab of the Work Area Bar. So let us make sure.
After you have added all your clips to the Timeline, do the gray tabs of the Work Area Bar span that Timeline content from what you see as the beginning and end of the whole content? When you hit the play button of the monitor, does the Timeline content playback from beginning and end of what you can see as the beginning and end or does the Timeline Indicator continue beyond the last item that you put on the Timeline? If the latter, then you are some fragments further to the right of the end that you can see. Typically the present (with Timeline content expanded max) as very thin vertical black lines which will need to be deleted. In these cases, use the End key stop position to search for the leftover(s).
Other Home and End key to navigate the whole Timeline content under the gray tabs of the Work Area Bar.
Titles and text, I am using one with "scrolling credits", is there a function where I can either "freeze" the screen after it scrolls to the text OR is there a function to "replay" the text instead of just going "black" and stopping?
The basics of this feature should be the same as in Premiere Elements 8.0/8.0.1. Menu name is different and Titler has a different look but principles are the same between 8.0/8.0.1 and 12. Are you talking about looping a text title? Sounds like that. If so we can talk about that in greater detail. Have you done in 8.0/8.0.1 what you want to go in 12 in this regard? Or is this a new effect that you want to achieve?
Please review. Keep up the great work.
ATR

Mismatch of Tan no 40ACK & 40ECC

Hi everyone,
Recently I uploaded Acknowledgement no's on Form16 through feature 40ACK.
Now my user wants to change the PAN &TAN no for 1 location(Nagpur).This new PAN &TAN no is same as of another location(Noida).Company Codes are different for both locations.
I changed the PAN &TAN through 40ECC for the desired Company Code.
The result is came fine on Form16.
But 40ACK still uses the OLD TAN no. I tried changing TAN no on 40ACK but system didnt allowed that. Now there's a mismatch on Form16.
For the desired Company Code new PAN &TAN no is being displayed on Form16 but acknowledgement no's are displayed as of another company code(Noida).Coz 40ACK for the desired location(Nagpur) still uses OLD TAN No but since in 40ECC these have been made similar as of Noida so system is picking Noida acknowledgement no's.
Please help me how to resolve this.
Thanks!

Hi Madhu,
Actually for acknowledgement no's system checks 40ACK where it sees the TAN no. Tan No in 40ECC is DELI04813E which is now same for both Company Codes(Noida& Nagpur). So for Nagpur also it displays the acknow. no's entered for the above TAN No.
I am facing 2 problems.
a) Ack. no's for both company codes are different
b)When I try changing TAN No in 40ACK ; I get an error
"Decision Operation not unique because field value occurs several times"

Regarding PAN, TAN & TDS Circle

Similar Messages

Maybe you are looking for