Regarding PO Print Preview

Can anybody tell me how to disable the print preview option in transaction me22n.
regards'
Amit Singla

find out any user exits or BADIs are available for the same.
Regards
prabhu

Similar Messages

Runtime error in print preview of Purchase Order

Hi,
I am facing a problem regarding the Print Preview of Purchase Order. This is happening after applying the patch no SAP_APPL Level 15.
The error is "Z_ME_PO_FOR_PRINTING IS NOT FOUND IN THE FUNCTION GROUP ZMEDRUCK" which is the copy of MEDRUCK.
How to solve the problem please guide.
Please Reply Soon
Thank you
Sankhajeet.
Message was edited by:
Sankhajeet Bhowmick

Hi
You have customized your layout and print programs.
Suggest you to sit with your ABAP programmer and they are the best ones to go through this problem.
Your print program is looking for a function module which is missing
Best regards
Ramki

4360 Print Preview

I have a 4360 all in one. Is there a print preview in the driver? In other printers I have (Canon) there is a print preview selection that allow me to see what will print before actually printing. It allows me to see how many pages there are and print all or just some of them. In the 4360 in the layout tab you can select page, but you have no idea on how many pages there are to print. I often think there is one page and the printer prints out 2 pages one with just a meaningles header and one that is what I want...its wasting paper and ink. HelpSad

Hey there ! Thank you for posting on the HP Forums! I should be able to help regarding the print preview and your printer. In your post you said you are using the 4360, are you referring to the Deskjet D4360 or did you mean the Officejet 4630? Could you also post back and let me know what operating system version your computer is running? If you are unsure of the operating system version: Click here for Windows: Windows Operating System Version Click here for Mac: Mac Operating System Version You should have a print preview with your printer. Sounds like there may be a software issue. Do you get the issue when you print from everything or is it just a specific program? I would recommend and uninstall and re-install of the HP software. If you could post back with the requested information I should be able to provide some more help.

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Regarding recieving Plant in print preview of PO

Dear All,
We need to maintain address of delivery plant as default in print preview of PO for all vendors. Please guide how to customize.
Regards,
Vikas

Hi,
In transaction NACE->ME-Purchasing->PO output types->Processing routine select the smart form and add the delivery plant fields with the help of ABAPER.
Regards,
BK

Regarding error "Field symbol is not assigned." during print preview

Hi experts,
    I am getting dump while trying print preview for particular POs in ME23n transaction(ECC 6.0). Please refer the below dump error:
Runtime Errors         GETWA_NOT_ASSIGNED_RANGE
Date and Time          29.09.2009 19:30:39
Short dump has not been completely stored (too big)
Short text
     Field symbol is not assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A field symbol that was not assigned was accessed
     (data segment no. 32769).
    The field symbol is no longer assigned because there was an attempt
    makde previously in a Unicode program to set the field symbol using
    ASSIGN with offset and/or length specification. Here, the memory
    addressed by the offset/length specification was not within the
    allowed area.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED_RANGE" " "
    "SAPLSTXC" or "LSTXCFFT"
    "FT_COMPOSE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
   2. Corresponding system log
      Display the system log by calling transaction SM21.
      Restrict the time interval to 10 minutes before and five minutes
   after the short dump. Then choose "System->List->Save->Local File
   (Unconverted)".
   3. If the problem occurs in a problem of your own or a modified SAP
   program: The source code of the program
      In the editor, choose "Utilities->More
   Utilities->Upload/Download->Download".
   4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
I am getting this dump only for few POs.. Rest of the POs are able to print. I am not able to find notes for this issue. Is there any SAP notes available for that or Is there any configuration issue related to this?
Please provide solution for thsi as soon as possible.
Thanks and Regards
Subbu

A field symbol is not assigned, but thats what the dump is telling you. Mostly this happens, when fields or function modules are stored by name, like the fieldnames in the fieldcatalog in an ALV report. It a field referenced in such a way does not exist you will get this error. Always store fieldnames and function names in capital letters and check mistyping of 1L 8B and so on.

Regarding Smart Form Printing, Print Preview issues

Hi,
I have couple of issues regarding Smart Form Printing, Print Preview.
In my program i am passing below parameters to smart form function module:
t_control-device = c_printer.
t_control-no_dialog = space.
t_control-preview = space.
t_control-no_dialog = c_x.
t_output-tddest = g_spld.
t_output-tdimmed = c_x. " Print Immediately
t_output-tddelete = space. " Don't Release spool after output
g_user_settings = c_x.
Issue#1: Though i have set preview paramter to space, after executing program it is prompting for Preview Screen, There again i have to give printer name though i am passing printer name as above and i need to hit on print preview button to set Layout output.
Here how can i go directly to layout output without preview screen.
Issue#2: In some cases we need to Print the layout set output after executing program immediately without prompting for preview screen and then Layout set output should also be shown after printing the output.
How can i solve these issues!
Thanks in advance.
Thanks,
Deep.

Hi,
In the SAP menu screen goto System->User Profile->Own data
There in the defaults tab, for the output device give the value you had maintained for g_spld. This will not prompt you a dialog screen, and if you want to print immediately select the checkbox as well. Then try to execute the smartform. Hope this solves ur issue.
Tushar

Regarding Print preview

Hi to all,
I have created one ALV report.Am getting correct output data.But when we click the PRINT PREVIEW its going to dump.And saying
" only character-type data objects are supported at the argument
position "obj".
But when i comment the below coding i am getting print preview perfectly.
Edu.Cess
G_FIELD      = 'ECESS'.
G_TABLE_NAME = 'WITH_ITEM'.
G_DDICTXT = 'L'.
FIELDCAT_LN-SELTEXT_L = 'Edu Cess(2 %)'(014).
To set the properties of the field catalog
PERFORM FIELDCAT_FILL USING G_FIELD G_TABLE_NAME G_DDICTXT.
H.Edu Cess
G_FIELD      = 'HCESS'.
G_TABLE_NAME = 'WITH_ITEM'.
G_DDICTXT = 'L'.
FIELDCAT_LN-SELTEXT_L = 'H .Edu Cess(1%)'(015).
To set the properties of the field catalog
PERFORM FIELDCAT_FILL USING G_FIELD G_TABLE_NAME G_DDICTXT.
Please give me the reply.
regards

Hi,
I also come across the same problem it will display perfactly but if u click on print privew button it will give dump.
the solution is check with your internal table 'WITH_ITEM' if there is any field other then character then just make it character or string type it will work.
Hope this helps
Bikas

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

Text in PO(text tab in header & item) is not shown in the Print Preview

Hi Guys,
 I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item) is not shown in the Print Preview.
 Can you guys help.Do I need to write a subroutine pool for this.
 <<text removed by moderator>>
Regards,
Rajiv
Edited by: Matt on Nov 12, 2008 1:20 PM

Hi ,
Use bapi bapi_po_getdetail .
CALL FUNCTION 'BAPI_PO_GETDETAIL'
 EXPORTING
 purchaseorder = is_ekko-ebeln
 item_texts = c_x
 header_texts = c_x
 TABLES
 po_header_texts = it_header_text
 po_item_texts = it_item_text.
Regards
Neetesh

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

Crystal Report print layout error during print preview

Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM

Hi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario

Financial Reporting 11.1.1.3 Client print preview crashes

Hi,
I've installed a Financial Reporting 11.1.1.3 Client on a Windows XP SP2 client. When i try to launch print preview of a report from the studio, it crashes, and return to the report without printing. Any idea?
Thanks.
Regards.

Dear John,
How to install latest Version of Hyperion HFM
1) I had downloaded Hyperion Enterprise Performance Management System Foundation Services, Product specific Essabase and Financial Management , and unzip into common folder . but stll iam not able to see Installtool.cmd
which part i have still dowloaded.
Regards
Amit

Dead space showing up in print preview; can't place objects in it

hi -- Somehow, I've managed to get what I'll call a "dead space" in between my last page footer and my report footer. The design view looks completely normal: page footer A, page footer B, and report footer. None are suppressed.
However, when I go to the print preview, what I have is: page footer A, page footer B, a dead space, and then the report footer. The dead space looks like a section, in that the far left of the preview shows lines (like section dividers) both above and below the dead space. However, when I right click on the dead space, I don't get a Section Menu; I also don't get a section name when the mouse hovers over that dead space. I can't place objects in the dead space.
It wouldn't be a huge deal except for the fact that the report is long enough that the dead space causes it to overflow onto a second page, which isn't acceptable.
How can I get rid of this thing? I really don't want to recreate the report. It's quite complex.
Thanks,
Carol
This is Crystal 11.

Hi Carol,
That's interesting. I've never heard of this rogue spacing issue.
Why don't you try insertting the following in the Page Footer B Suppress formula.
Not OnLastRecord
Maybe that will help.
Regards,
Zack H.

Difference in LOCL print preview for same script in two different systems

Hi All,
When I am testing a dunning letter ( Custom sapscript) in my testing system the LOCL print preview is correct...When I am testing it in my development system by taking print preview from LOCL it is not printing a uline and some line item headers...
There is one text element for printing line item header.
U1....ULINE(73)
T0    &vline& ....&T_MATNR&..
T3    &vline&
UL   &ULINE(73)
IN Development sytame in print preview every thing is perfect except the above portion the first uline and vline are not getting printed and as a result next vline and uline are dispalyed a bit above .. I am unable to understand why one uline is not printed but the othe one is printed as we are using HELVE12 in both cases and above all why in test system this problem is not occuring..
I checked and am 100% sure there is no difference between the layout versions in the two sapscripts...Also checked most of the SPAD configs in two systems and found them same..
Can you give me any idead about the reason for the diffrence in print preview as in both cases it will consider the printer installed on the local desktop....
Just we use citrix metaframe to log in SAP but that should not be the reason as thne problem would be in both system..
Please help me out...
Thanks and Regards
Sweta

Hi ,
I already mentioned that I am selcting LOCL ( Device type Sapwin) in both cases so in both cases it is considering the printer installed on the local system...
Can anyone tell me specific spad config or anything else which I need to compare in both systems..

Regarding PO Print Preview

Similar Messages

Maybe you are looking for