Regarding post installation
Hi,
could you all please help me in knowing the jobs that are to be scheduled after installation of an ECC server. I want to know the common jobs that are scheduled after the installation. The jobs may also include background jobs.
I hope some of the jobs are like checkDB, verifyDB...could you help me with more..
vineeth
Hello Vineeth,
Generally after the installation as a part of post installation we schedule standard background jobs which can be done through SM36, you may find a standard note on the Standard background jobs.
Best Regards,
Sachin.
Similar Messages
-
Regarding post installation jobs
Hi,
could you all please help me in knowing the jobs that are to be scheduled after installation of an ECC server. I want to know the common jobs that are scheduled after the installation. The jobs may also include background jobs.
I hope some of the jobs are like checkDB, verifyDB...could you help me with more..
vineethHi vineeth,
with transaction SM36, you have the button "Standard job" that you can use to schedule all necessary job in your system. This function allow to schedule job in the right client, so is better to launch it after client copy. Not all job are mandatory, for example if you haven't a livecache you can not schedule the job regarding it.
The job for database are to be scheduled from transaction DB13, usually I schedule from DB13 the check DB, update statistic and clean up log
Best Regards
Giuseppe
Message was edited by:
Giuseppe Tagliente -
Regarding post installation job's
Hi,
could you all please help me in knowing the jobs that are to be scheduled after installation of an ECC server. I want to know the common jobs that are scheduled after the installation. The jobs may also include background jobs.
I hope some of the jobs are like checkDB, verifyDB...could you help me with more..
vineethHi Vineeth,
You must configure all the SAP standart REORG jobs, see Note 16083 - Standard jobs, reorganization jobs.
You also can schedule CheckDB & CleanupLogs through DB13
Hope this help
Juan
Please reward with points if helpful -
Post installations in PI7.0
Hi all,
Can anyone explain me regarding post installations in PI7.0
Step by step.
Thanks,
Kalyan.hi,
Post-Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Post-Installation Steps of the NWDI in the SAP NetWeaveru2122 2004 SPS15 Sneak-Preview
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209
/people/sravya.talanki2/blog/2006/11/15/post-installation-steps-for-activating-adobe-document-services-in-sap-xi-nw-2004s
Post installation Steps.
SLD configuaration..
http://help.sap.com/bp_epv170/EP_US/Documentation/How-to/Configuration/Post_Install_SLD_NW_2004s.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
http://help.sap.com/saphelp_nw04/helpdata/en/78/20244134a56532e10000000a1550b0/content.htm
http://help.sap.com/bp_bpmv130/html/Specific_Info.htm
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a5550de0-0701-0010-a8b4-9fd433a080f3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a5550de0-0701-0010-a8b4-9fd433a080f3
Tuning guide -
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad
Thanks,
Vijaya.
Edited by: Vijaya Lakshmi Palla on Jun 18, 2008 8:32 AM -
Regarding the Post Installation and SP Level
Hi All,
We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system.
As our EP system is on SP 11and NWDI system on sp 9,Do we need get EP and NWDI Patch level in Sync? as there would be developers working from EP and BW as well on this NWDI server.
Here My doubt is:-
Do the Nwdi System needs to be in the same patch level as our EP system (as it is installed on EP itself.)
Do we need to run the Template for the Newly installed NWDI only after the Patch Upgradation?
Kindly Advice
Regards
Santosh.N.Gthe patch level of EP and NWDI should be same
-
Post - Installation SAP R/3 4.7 - Urgent !!
Hi All,
I have installed SAP R/3 4.7. I would like to know what are the post-installation steps involved in it. I went through the installation guide. But, I am not able to understand the details provided in that. Can somebody tell me what are all the steps involved as a part of the post installation.
Kindly Help !!! Its urgent !!
Regards,
Rose.Hi,
Initial Consistency Check
SM28
Edit Batch Jobs
Workbench Organizer Reconfiguration
TMS Configuration
Import Printers
Client Configuration
SCC4
Set System Change Option
SE06
STMS
SCC7
SM37
Deleting Source System Profiles
RZ10
Reconfigure Operation Modes
RZ04
Delete Update Failures
SM13
Delete Batch Input Sessions
SM35
Reorganize Spool
SPAD
SP12
Delete Invalid Background Control Objects
Restrict Outgoing Email and Faxes
SCOT
Adjust RFC connections.
SM59
Adjust Logical Systems names
SALE
Hope this helps.
Cheeers
Deepanshu -
SCM Dialog instance installation, post installation activity for livecache
Hi All,
We have installed SCM 7.0 Central instance with Livecache server. Now we have successfully installed additional application server (i.e. Dialog instance) for this SCM 7.0 system.
We need to know
After installation of SCM 7.0 Dialog instance what are the post installation activities?
How we should integrate the livecache server with the Dialog instance which is installed on different hardware.
We need to know how livecache server understand that the additonal application server ? Is there anything to do in LC10?
Please reply
ThanksHi Ashley,
Thanks for your time.
Since i am installing app server, the SAP<SID> group will have to be online on this node. There is another group containing shared drives for components for livecache. This is also required to be online on node 2 for app server installation.
The only cluster resource I can move back to node 1 is ORACLE<SID>. Tried doing that, but no luck.
Any one here facing similar issue during SCM dialog instance installation in MSCS environment?
Regards,
Kiran -
Post-Installation Process Error (Template Base)
Hi Experts,
I try to run template base post-installation process in client 100, we never run post installation process in client 001 (Which is recommended before making the client copy), while doing template base post-installation process failed (got error) at PIPostInstallProcess step 7 u201CAdd Installed Product2u201D I move further and then it failed at step 19 (u201CConfigure the Role of the Integration Serviceu201D) and 20 (Register Queues) same process. It failed at number of process, so what I did I move to manual post-installation process but I stuck in the step were we need to import exchange_profile.xml because I can not see this file at sap\BX0\SYS\global, is this file being deleted by template base post-installation if yes then how to recover it?
Without this file i can not complete the manual post installation process...:-(
With Regards
Sunili think we do not need exchange_profile.xml file in 7.0 post-installation. ok i skip that step in post-installation now when i created LCRSAPRFC_BX0 in Visual Admin services->JCo RFCProvider and try to start it, it is throwing an Error.
I am using user "PI_JCO_RFC" has respective role assign to it.
I am not sure whether i am providing correct value to these filed or not
Gateway Host
Gateway Service
Application server host
System Number
Client
can somebody send me detail about these fields
With Regards
Sunil -
Post installation error "Local logical system is not defined"
Hello everyone,
I freshly installed the latest SAP NetWeaver 7.01 ABAP Trial from scratch and like to configure ALE.
I followed thew steps of http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/CABFAALEQS/CABFAALEQS.pdf
(ALE Quick Start) but cannot get through the following step on page 12:
From the R/3 Implementation Guide screen in TA SALE
choose Basis
Application Link Enabling (ALE)
Modeling and Implementing Business Processes
Maintain Distribution Model and Distribute Views
Clicking on Maintain Distribution Model or using TA BD87, I immedeately get the following error:
The initialization of the logical system has failed.
With TA BD64 the error: Local logical system is not defined arises. I also looked at
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi,
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1 and
/people/kevin.wilson2/blog/2006/11/13/ale-scenario-development-guide describing the same actions
to find an explanation, but without success
I assume, the error does not occur because the trial version does not support it, but
because of other post installation activities that must be done.
I already created two logical systems and assigned them to newly created clients 100 and 200,
but this did not have any impact on BD87 and BD64 as i was hoping.
Does somebody know what to do here?
Thanks in advance and kind regards,
AndreasHi Naveed,
i made the following settings:
SCC4: new entries created
100 Sending System
200 Receiving System
SM59: new ABAP type 3 connections:
RFC_DEST_LS_100
RFC_DEST_LS_200
- Tab Logon & Security Logon user: current user (bcuser client 001)
Connection test is successful
- Technical Settings: target host: localhost
SALE: new logical systems created
LS_100
LS_200
SCC4:
double click on 100 Sending System configured with logical system LS_100
double click on 200 Receiving System configured with logical system LS_200
kind regards
Andreas -
Error in PI 7.0 not connect to go.bat & Post installation errors
im completed installation of PI 7.0
SYSTEM NAME : BIW7
System ID : BI7
DB ID : BIW
Instance No : 04
for post installation unable tp connect go.bat
im giving right password
http://biw7:50400/ExchangeProfile = it gives error 404 not found
http://biw7:50400/sld gives following error
503 Service Unavailable
Application cannot be started.
Details: com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.For exchange profile, ur URL is incorrect. Try this
http://biw7:50400/exchangeProfile
Regards,
Prateek -
SLD port problem in Netweaver XI post installation configuration steps
Hi All,
Recently we changed the port number of the SAP server to 80.Every thing working fine.
When ever we are configuring the XI that mean the post installation steps for Exchange Infrastructure it giving the errors in machine_technical_configuration step.
Error Message is:
Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!157-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.96
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41
Element 'SAPConfigLib.NW5.Unclassified.addInstalledProduct':Error during executing Java Reflection:IO error: Unable to open connection to host "mmsr18:50000". The host is down or unavailable..
Is there any solution to solve this....
Thanks & Regards,
Vivek.hi
check if the new port(80) is maintained in tcode- sldapicust
Thx
jonu -
Transport Request as Per TMS in XI 3.0's Post Installation
Hi Everybody !!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
SAP_BW , SAP_BASIS, SAP_ABAP and PI_BASIS Patches have been applied. I am doing the XI Post Installation Steps and for that as per the Post Installation Steps' Guide, I need to perform SAP XI customizing... I am done till the stage of using tr code SWF_XI_CUSTOMISING to perform the basic
customising of SAP XI. But, after entering prefix no. higher than 900 for the new user with 'local object' selection... I have confusion for the following instruction :
" You need to enter a transport request according to your transport management system ( TMS ) and choose Save again.."
I don't see any tms button or any menu option and hence, have no idea how to enter a transport request and where to enter that request...
I sincerely aprreciate the help provided and just for the record, I never fail to assign points for helpful answeres..
Thanks in Advance Again..
Regards..
-Rupen PatelHi Rupen,
You just have to make sure that nodes Maintain Runtime Environment and Maintain Definition Environment have green hook (not a red cross) after all the customizing done in transaction SWF_XI_CUSTOMIZING.
The instruction "You need to enter a transport request according to your transport management system ( TMS ) and choose Save again" is not so much important as it is just an informative instruction. Even i don't remember doing such a task and my XI environment is working perfectly fine.
Regards,
Abhishek -
Error in the post installation steps of SLD .
Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please help me.
Thanx & Regards,
NareshHi Naresh,
Can you let me know the service pack for the portal.
Also try login in using administrator using the http://<localhost><port>/sld
thanks
Pankaj -
Error in the post installation of SLD .
Hi
We are working on EP7.0 2004s.We are using local sld.Right now I am doing the post installation steps for SLD.I added the J2EE and UME roles.In the next step I went into the administration tab of SLD for configuring.It is throwing this error.
<b>com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!</b>
This is detailed exception I got.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug must no be triggered with an URL when running in portal. Use portal navigation instead to navigate to another application!
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:516)
at com.sap.tc.webdynpro.progmodel.view.View.navigate(View.java:462)
at com.sap.sld.wd.main.wdp.InternalMainInterfaceView.wdFirePlugToOldUI(InternalMainInterfaceView.java:154)
at com.sap.sld.wd.main.Head.onActionAdministration(Head.java:277)
at com.sap.sld.wd.main.wdp.InternalHead.wdInvokeEventHandler(InternalHead.java:227)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
<b>
Please help me.</b>
T
hanx & Regards,
NareshHi Naresh
Try logging off from the current window.
and login again as "Administrator" .
use http://portalhostname:50000/sld
hope this helps
Cheers !!!
Satish Kumar. -
Post installation steps for SAP PI, scenarios for SAP ERP 6.0 EhP 3.0 BAIO
Hi!
I installed SAP NetWeaver 2004S with PI component.
I also have a demo SAP ERP 6.0 EhP 3.0 BAIO system with several clients:
(100: demo client, 200: BW, 300: demo client (copy of 100)).
Questions:
what are the post installation steps to configure SAP PI?
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
Thank you very much indeed!
regards
HolgerHi Holger:
what are the post installation steps to configure SAP PI?
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/content.htm
Which scenarios can be used in such landscape?
(eg. exchange (IDOC, RFC, etc.) from client ERP:100 to ERP:200)
I recommend you to use proxys in your landscape as you want to interchange messages between
different clients in the same system.
Hope this helps you.
Carlos
Maybe you are looking for
-
Email Sales Order Confirmation to "Created By" -
Hi Experts I have a requirement where we need to email the Order confirmation output to the person who has created the sales order. So lets say i am creating a sales order and my user id is 9999. (SY-UNAME). Now as we have implemented HR module and o
-
Hp mini 110 fatal error CNU902222G
When i try to enter my bios, i am asked for a password, which i didnt put on there myself. The code it gives me is CNU902222G and i cant find anything on that code. How can I bypass it and fix the issue. This question was solved. View Solution.
-
I've previously - with no success so far - asked THE BIG FORUM for routines on compression schemes maintaining good quality _and_ reasonable filesize. Please have a look at this videosnippet wich is my goal http://www.tacx-video.com/Downloads/Kem-Iep
-
Can you help with a misplaying online Flash game?
I don't know if this question is appropriate for this forum, but here's taking a chance, and I hope you can help. A Flash game I play at discovery.com worked fine about a year ago. I stopped playing it for several months, and then went back to it. Wh
-
CRM On Demand Integration Development
Hi, I have just downloaded the wsdl from CRM OnDemand. I am trying to generate the client for wsdl using Apache Axis 2 verison 1.6.2 and getting the following error. Caused by: org.apache.axis2.schema.SchemaCompilationException: The referenced elem