Regarding posting invoice to sap system from non r/3 system
HI experts,
I have to create or change the existing invoice in sap system by using the idoc. Idoc has been extended to meet customer requirements. for creating i am using BAPI_INQUIRY_CREATEFROMDATA2 and for changing i am using BAPI_CUSTOMERINQUIRY_CHANGE in the same function module Z_IDOC_INPUT_INQUIRY_CREATEFRO (standardd one: IDOC_INPUT_INQUIRY_CREATEFROMD)
It is working fine for the creating but it is going into dump for change by giving error messge fm is not called properly. I am passing same all parameters to the change bapi like i have passed for the Creating bapi. please help me out in this.
Thanks & regards,
Prasanna
*good solutions will be rewarded***
Hello Prasanna,
Go to transaction SE37, put in 'BAPI_INQUIRY_CREATEFROMDATA2' and use menu entry
- Goto - Documentation - Function Module Documentation
There you can find a description of the various parameters for that BAPI.
Regards,
Michael
Similar Messages
-
Error while reading the ID of own business system from the SLD for system
Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar -
Error while reading ID of own business system from the SLD for system D18
Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed -
Error while reading ID of own business system from the SLD for system DPI
Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PMHi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv... -
Transporting into a new BW system from a shared dev system
We are currently in the process of setting up a new BW system in the same landscape as our existing one where both boxes will share the same dev system. Our existing one is used by many different applications and has tonnes of shared objects on it. Our new box will only be used for SEM-BCS and thus does not need everything else that the other box contains. Since many objects are dependant on others (attributes and such) I am finding it hard to get transports into the new system. There always seems to be something missing even when I try to just move a single object. I also seem to be having troubles with InfoObject Catalogs where they cannot be moved if the InfoObjects are not there and the InfoObjects a cannot be moved with the Catalogs not there. This is all starting to give me a serious headache.
Has anyone delt with transporting to separate systems from a common development system? What is the best approach to this to ensure we only move what we need to the new system?The transporting is the same, however there are a lot of dependant objects that also need to be brought into our system. I'm looking for a way to minimize what I need to transport into our new system.
Collecting automatically doesn;t seem to be working for me since it does not collect everything I need and when I add that missing object I then seem to be missing another list of objects. It seems to be a never ending cycle. -
Data load into SAP ECC from Non SAP system
Hi Experts,
I am very new to BODS and I have want to load historical data from non SAP source system into SAP R/3 tables like VBAK,VBAP using BODS, Can you please provide steps/documents or guidelines on how to achieve this.
Regards,
MonilHi
In order to load into SAP you have the following options
1. Use IDocs. There are several standard IDocs in ECC for specific objects (MATMAS for materials, DEBMAS for customers, etc., ) You can generate and send IDocs as messages to the SAP Target using BODS.
2. Use LSMW programs to load into SAP Target. These programs will require input files generated in specific layouts generated using BODS.
3. Direct Input - The direct input method is to write ABAP programs targetting on specific tables. This approach is very complex and hence a lot of thought process needs to be applied.
The OSS Notes supplied in previous messages are all excellent guidance to steer you in the right direction on the choice of load, etc.,
However, the data load into SAP needs to be object specific. So targetting merely the sales tables will not help as the sales document data held in VBAK and VBAP tables you mentioned are related to Articles. These tables will hold sales document data for already created articles. So if you want to specifically target these tables, then you may need to prepare an LSMW program for the purpose.
To answer your question on whether it is possible to load objects like Materials, customers, vendors etc using BODS, it is yes you can.
Below is a standard list of IDocs that you can use for this purpose to load into SAP ECC system from a non SAP system.
Customer Master - DEBMAS
Article Master - ARTMAS
Material Master - MATMAS
Vendor Master - CREMAS
Purchase Info Records (PIR) - INFREC
The list is endless.........
In order to achieve this, you will need to get the functional design consultants to provide ETL mapping for the legacy data to IDoc target schema and fields (better to ahve sa tech table names and fields too). You should then prepare the data after putting it through the standard check table validations for each object along with any business specific conversion rules and validations applied. Having prepared this data, you can either generate flat file output for load into SAP using LSMW programs or generate IDoc messages to the target SAPsystem.
If you are going to post IDocs directly into SAP target using BODS, you will need to create a partner profile for BODS to send IDocs and define the IDocs you need as inbound IDocs. There are few more setings like RFC connectivity, authorizations etc, in order for BODS to successfully send IDocs into the SAP Target.
Do let me know if you need more info on any specific queries or issues you may encounter.
kind regards
Raghu -
Triggering SAP workflow from non-SAP system
I am trying to use WF-XML to trigger a workflow in SAP from non-SAP system.
I have already created a workflow template in SAP and want to test the scenario if this will be really hit by the incoming xml message.
Questions:
1. How the data from incoming xml is tranferred to workflow container element? IF system does it, how is done? If not how to address it?
2. Do we have some tool here, to simulate this situation - to create a test xml incoming message with SAP and really see if that triggers the desired workflow template. Pupose is testing the scenario first in SAP and then going to the other system to test the real interface.
This is somewhat similar that we see in incoming IDoc. In Idoc we can simulate the incoming IDoc structure and test.
Is any one here who can guide on this?
Thanks in advance.
Rgds.Hi,
You don't need a triggering event. In the xml it says which workflow should be started. You don't need a class to fill the container. The service does this.
I think there is a way to generate an example xml but I don't know exactly how. In the <a href="http://help.sap.com/saphelp_nw70/helpdata/en/54/de9e3887d6174fe10000009b38f842/frameset.htm">SAPHelp</a> there are some examples of the documents. Check also the entry above it about the creation of a WF_XML document. In the first and third example it shows a container element and its value (QUESTION).
Try to get a copy of the book "Practical workflow for SAP" by Alan Rickayzen. It has got a part about this.
Also check this link from the SAPHelp:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/e8/ea8d380be34e6ce10000009b38f842/frameset.htm">Call Tab Page</a>
Regards,
Martin -
Creating RFC Destination For UNICODE system From NON-UNICODE system
hi
how can i create RFC Destination For UNICODE system( XI ) From NON-UNICODE (R/3) system.
thanks and regards
Mithlesh Kumar JhaHi,
Check these blogs , Hope u would be getting some idea
<b>/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/sap.user72/blog/2004/06/19/how-i-started-with-sap-web-development</b>
Regards,
Sridhar Reddy -
Able to post Invoice for Blocked stock from quality
Hi
I did GR for material against PO for 50 pcs, During QA32 stock posting i posted 30 pcs to Unres. stock(101) and 20 pieces to blocked stock(350) storage locations.
Now when I am trying to create MIRO invoice verification, I am getting all the 50 pcs and available to post also for the entire quantity. How the system is allowing me to carryout Invoice verification for the blocked stock 20 pcs also ???
It should allow me to process the 30 pcs only which are in unres. stock .
How do I block the blocked stock from getting invoiced ?
Please help
Thanks
SamuelDear Jurgen
Thanks for the reply, master does contain the control key, I also have the inpsection set_up for the materials. During PO in delivery tab at item level I am getting stock type as Quality Inspection. During GR, lot is getting generated and we are able to Stock post it using QA11. Every thing works fine till the stock is there in Quality till the run of Txn QA11. But once stock is out of quality we are having the issue for the stock posted to blocked, I can understand MIRO picking up Unrestricted Quantity of the Lot but why it is also picking the quantity posted to blocked stock as we do not want to pay the vendor for this stock quanitity till we clear it.
Is there any normal config setting to stop it form geting picked during MIRO.
Thanks -
Regarding posting invoice for 3rd party
Dear Experts,
I have done third party and did up to grn. While doing invoice for that it is showing an error
" account 893010 has been set as non-relevant for tax ". how could i post invoice.? where shall i make the correction ? kindly let me know please.
Regards,
PrasathHi,
Please check in t code FS00. Enter your GL account an maintain tax category and do MIRO.
Regards
Ram
Edited by: ramachandran subramanian on Mar 31, 2009 9:41 AM -
Error while reading ID of own business system from the SLD for system
Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario. -
Refreshing R/3 4.7 system from ECC 6.0 system
HI Experts,
We recently upgraded the system from R/3 4.7 (BASIS release 620) to ECC 6.0 (BASIS release 701). For one of the test system, a cross version refresh was performed. (Sandbox system was in 4.7 and production system is ECC 6.0).
When the refresh was completed, we were not able to login in 000 client using any of the user ids including the standard ones. Seems like all the user ids were deleted in 000 client. Then we changed the sap* login parameter and restarted the system to reset the SAP* login. Later the user master was imported from production system to test system's 000 client.
Are there any special steps to be carried out to prevent the above said incident?
What are the special steps that needs to be taken care of in the scenario of 'cross version' refresh.
Please let me know your inputs on this.
Thank you.
Balaji SinghHi Mark,
Yes the SAP Kernel was replaced.
OS - HP UX B.11.31
DB - ORACLE 10.2.0.4
There were no issues during the start of DB, appl after refresh. We imported the User master in the productive client that was backed up before refresh and imported the same after refresh. coincidentall, after the import of user master in productive client, this particular issue occurred in client 000. could this be a reason for deletion of user master tables in 000 client?
Regards,
Balaji Singh -
Extract Tables/views into ECC 5.0 SAP system from Non-SAP system
Hi,
I am looking for some inputs on how to set up the following scenario of extracting data stored in tables/views in a non-sap external system into my SAP ECC 5.0 SAP database.
Currently we are using a middleware between SAP and the external system to fetch data. I would like to get rid of the middleware and set up a scenario to call this non-sap external system and pull data stored in views into our SAP system directly. Is that possible in SAP version 5.0? If yes let me know the steps to be performed... do I need to set up XI ?maybe you can access sap data using some connector such as java or .net connector.
-
Post invoice in SAP - Simulate functionality?
Hi All,
I am developing an interface to post/park invoices in my ECC systems. The Electronic invoices comes from PI so I have the options of using both IDOCs and BAPIs....
The requirement I have is something like this -
The incoming invoice have to be "simulated", the error messages from the simulation have to be collected and then INVOICE has to be put in parked status.
The "simulate" actions referes to the stimulate button in the standard fb60 transaction. Can that action be performed programatically? I found BAPIs to post/park idocs...
I am looking for either BAPIs, IDOCs process codes/ std programs to can achieve the "simulate funtion ".
Thank You.
Arvind RHi,
With my knowlwedge in working with incoming invoices, I dont think there is something standard in BAPIs or IDocs process code to achieve the simulate function in fb60.
Regards,
Vineetha. -
I am having a very slow system - from a very fast system
I am suffering from a system that is really slowing down and becoming almost unresponsive some of the time. From a previous post I have learned of EtreCheck and here is the report.
Any help is much appreciated.
Problem description:
slow system
EtreCheck version: 2.0.4 (89)
Report generated 15October, 2014 at 14:43:46 CDT
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Verified)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 2048 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 8 days 8:51:53
Disk Information: ℹ️
Hitachi HDS722020ALA330 disk0 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 2 TB (2 TB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Microsoft Microsoft® USB Hub
Microsoft Microsoft® Wireless Laser Mouse 8000
HP Officejet Pro 8500 A910
Apple Inc. Apple Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
VIA Labs, Inc. USB2.0 Hub
LaCie Porsche Desktop for Mac 4 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 315 MB
LaCie (disk3s2) /Volumes/LaCie 1 : 4 TB (4 TB free)
LaCie LaCie Hard Drive USB 2 TB
S.M.A.R.T. Status: Verified
disk2s1 (disk2s1) <not mounted> : 32 KB
LaCie (disk2s3) /Volumes/LaCie : 2 TB (2 TB free)
STECH Simple Drive 500.11 GB
S.M.A.R.T. Status: Verified
Simple Drive (disk1s1) /Volumes/Simple Drive : 500.11 GB (484.02 GB free)
Generic USB Ear-Microphone
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Library/Application Support/MacKeeper/AntiVirus.app
[loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) Support
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) Support
/Library/StartupItems/Parallels
[not loaded] com.parallels.kext.Pvsvnic (3.0) Support
/Library/StartupItems/VirusBarrier
[not loaded] com.intego.iokit.VirusBarrierService (1396) Support
[not loaded] com.intego.kext.VirusBarrier_1694 (10.1.5) Support
/System/Library/Extensions
[not loaded] com.Livescribe.iokit.PulseDriver (1.0.0) Support
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
[not loaded] com.parallels.kext.ConnectUSB (3.0.0) Support
[not loaded] com.parallels.kext.Pvsnet (3.0) Support
[not loaded] com.parallels.kext.hypervisor (3.0) Support
[not loaded] com.parallels.kext.vmmain (3.0) Support
[loaded] com.smithMicro.driver.DeviceSentry (5.1) Support
[loaded] com.smithmicro.DeviceSentryCR (5.1) Support
[loaded] com.smithmicro.nke.NetBlockade (5.1) Support
[loaded] com.smithmicro.nke.NetworkSpyAlert (5.1) Support
[not loaded] net.telestream.driver.IODVDImage (1.0 ) Support
/System/Library/Extensions/DeviceSentry.kext/Contents/PlugIns
[not loaded] com.smithMicro.driver.DeviceSentryBD (5.1) Support
[not loaded] com.smithMicro.driver.DeviceSentryCD (5.1) Support
[loaded] com.smithMicro.driver.DeviceSentryDVD (5.1) Support
Startup Items: ℹ️
comapcpcpestart: Path: /Library/StartupItems/comapcpcpestart
esets_daemon_si: Path: /Library/StartupItems/esets_daemon_si
HP IO: Path: /Library/StartupItems/HP IO
Macaroni: Path: /Library/StartupItems/Macaroni
Parallels: Path: /Library/StartupItems/Parallels
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
VirusBarrier: Path: /Library/StartupItems/VirusBarrier
WDMyBookServiceStartupItem: Path: /Library/StartupItems/WDMyBookServiceStartupItem
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Daemons: ℹ️
[failed] com.apple.AOSNotificationOSX.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.brother.LOGINserver.plist Support
[loaded] com.carbonite.launchd.carbonitealerts.plist Support
[running] com.carbonite.launchd.carbonitestatus.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[running] com.hp.productresearch.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[running] com.intego.commonservices.integomenu.plist Support
[loaded] com.intego.commonservices.taskmanager.plist Support
[loaded] com.intego.commonservices.uninstaller.plist Support
[running] com.intego.netupdate.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.pegatech.NoteTakerService.plist Support
[running] com.smithmicro.SmithMicroPGGAgent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.backblaze.bzserv.plist Support
[running] com.carbonite.launchd.carbonitedaemon.plist Support
[failed] com.crashplan.engine.plist Support
[running] com.distortedvista.istatmenusprocessserver.plist Support
[failed] com.google.GoogleML.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[running] com.intego.commonservices.daemon.integod.plist Support
[running] com.intego.commonservices.daemon.taskmanager.plist Support
[loaded] com.intego.commonservices.icalserver.plist Support
[loaded] com.intego.commonservices.metrics.kschecker.plist Support
[running] com.intego.netupdate.daemon.plist Support
[failed] com.livescribe.PenCommService.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[loaded] com.prosofteng.DriveGenius.locum.plist Support
[running] com.prosoftnet.idrivedaemon.plist Support
[running] com.prosoftnet.idsyncdaemon.plist Support
[running] com.prosoftnet.idwebdaemon.plist Support
[loaded] com.sharpcast.xfsmond.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
[invalid?] com.smithmicro.smithmicropggd.plist Support
[loaded] com.stclairsoft.DefaultFolderXAgent.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
[failed] openbase.plist Support
User Launch Agents:Here's where I am now:
Problem description:
slow system 16Oct2014_1153
EtreCheck version: 2.0.4 (89)
Report generated 16October, 2014 at 11:53:28 CDT
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Verified)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 2048 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 4:51:16
Disk Information: ℹ️
Hitachi HDS722020ALA330 disk0 : (2 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 2 TB (2 TB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Microsoft Microsoft® USB Hub
Microsoft Microsoft® Wireless Laser Mouse 8000
HP Officejet Pro 8500 A910
Apple Inc. Apple Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
VIA Labs, Inc. USB2.0 Hub
LaCie Porsche Desktop for Mac 4 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 315 MB
LaCie (disk2s2) /Volumes/LaCie : 4 TB (4 TB free)
LaCie LaCie Hard Drive USB 2 TB
S.M.A.R.T. Status: Verified
disk3s1 (disk3s1) <not mounted> : 32 KB
LaCie (disk3s3) /Volumes/LaCie 1 : 2 TB (2 TB free)
STECH Simple Drive 500.11 GB
S.M.A.R.T. Status: Verified
Simple Drive (disk1s1) /Volumes/Simple Drive : 500.11 GB (484.02 GB free)
Generic USB Ear-Microphone
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Library/StartupItems/Parallels
[not loaded] com.parallels.kext.Pvsvnic (3.0) Support
/System/Library/Extensions
[not loaded] com.Livescribe.iokit.PulseDriver (1.0.0) Support
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
[not loaded] com.parallels.kext.ConnectUSB (3.0.0) Support
[not loaded] com.parallels.kext.Pvsnet (3.0) Support
[not loaded] com.parallels.kext.hypervisor (3.0) Support
[not loaded] com.parallels.kext.vmmain (3.0) Support
[loaded] com.smithMicro.driver.DeviceSentry (5.1) Support
[loaded] com.smithmicro.DeviceSentryCR (5.1) Support
[loaded] com.smithmicro.nke.NetBlockade (5.1) Support
[not loaded] net.telestream.driver.IODVDImage (1.0 ) Support
/System/Library/Extensions/DeviceSentry.kext/Contents/PlugIns
[not loaded] com.smithMicro.driver.DeviceSentryBD (5.1) Support
[not loaded] com.smithMicro.driver.DeviceSentryCD (5.1) Support
[loaded] com.smithMicro.driver.DeviceSentryDVD (5.1) Support
Startup Items: ℹ️
comapcpcpestart: Path: /Library/StartupItems/comapcpcpestart
esets_daemon_si: Path: /Library/StartupItems/esets_daemon_si
HP IO: Path: /Library/StartupItems/HP IO
Macaroni: Path: /Library/StartupItems/Macaroni
Parallels: Path: /Library/StartupItems/Parallels
ParallelsTransporter: Path: /Library/StartupItems/ParallelsTransporter
WDMyBookServiceStartupItem: Path: /Library/StartupItems/WDMyBookServiceStartupItem
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.carbonite.launchd.carbonitealerts.plist Support
[running] com.carbonite.launchd.carbonitestatus.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.hp.help.tocgenerator.plist Support
[running] com.hp.productresearch.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.pegatech.NoteTakerService.plist Support
[running] com.smithmicro.SmithMicroPGGAgent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.backblaze.bzserv.plist Support
[running] com.carbonite.launchd.carbonitedaemon.plist Support
[running] com.distortedvista.istatmenusprocessserver.plist Support
[failed] com.google.GoogleML.plist Support
[loaded] com.google.keystone.daemon.plist Support
[failed] com.livescribe.PenCommService.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.prosoftnet.idrivedaemon.plist Support
[running] com.prosoftnet.idsyncdaemon.plist Support
[running] com.prosoftnet.idwebdaemon.plist Support
[loaded] com.sharpcast.xfsmond.plist Support
[loaded] com.stclairsoft.DefaultFolderXAgent.plist Support
[failed] openbase.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[running] com.akamai.single-user-client.plist Support
[loaded] com.chronos.CHBackupAgent.plist Support
[running] com.ecamm.printopia.plist Support
[invalid?] com.google.Chrome.framework.plist Support
[invalid?] com.leadertech.PowerRegister.FUJ1.9e185efee63d7548c264550bd3f7af3f.plist Support
[loaded] com.logos.LogosIndexer.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[invalid?] com.zimbra.desktop.plist Support
[invalid?] com.zimbra.zdesktop.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
System Events Application (/System/Library/CoreServices/System Events.app)
Default Folder X Helper Application (/Library/PreferencePanes/Default Folder X.prefPane/Contents/Resources/Default Folder X Helper.app)
Default Folder X Application (/Library/PreferencePanes/Default Folder X.prefPane/Contents/Resources/Default Folder X.app)
Dropbox Application (/Applications/Dropbox.app)
Copy UNKNOWNHidden (missing value)
PopChar ApplicationHidden (/Applications/PopChar.app)
Fantastical Application (/Applications/Fantastical.app)
Box Sync ApplicationHidden (/Applications/Box Sync.app)
NoteBookHelper Application (/Users/[redacted]/Library/Services/NoteBookHelper.service)
SOHOCalendarsService UNKNOWN (missing value)
MailTagsHelper Application (/Users/[redacted]/Library/Application Support/Indev/MailTagsHelper.app)
DEVONthink Sorter Application (/Applications/DEVONthink Pro.app/Contents/PlugIns/SorterPlugin.bundle/Contents/MacOS/DEVONthink Sorter.app)
HP Product Research ApplicationHidden (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
nplastpass: Version: 2.5.5 Support
o1dbrowserplugin: Version: 5.4.2.18903 Support
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
RealPlayer Plugin: Version: (null) Support
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.4.2.18903 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User Internet Plug-ins: ℹ️
Picasa: Version: 1.0 Support
Google Earth Web Plug-in: Version: 7.0 Support
Safari Extensions: ℹ️
markerto
Instapaper Article Tools (Disabled)
Add To Amazon Wish List (Disabled)
Evernote Web Clipper
DuckDuckGo
AdBlock
Ticker
Translate
Shortly
Clip to DEVONthink
LastPass
AllPagesZoom
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences Support
APC PowerChute Personal Edition Support
Carbonite Support
Default Folder X Support
Flash Player Support
Flip4Mac WMV Support
FUSE for OS X (OSXFUSE) Support
iStat menus Support
Java Support
Macaroni Support
OpenBasePreferences Support
Printopia Support
Xmarks for Safari Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 2 TB Disk used: 157.37 GB
Destinations:
LaCie [Local]
Total size: 4 TB
Total number of backups: 60
Oldest backup: 2014-07-14 20:42:21 +0000
Last backup: 2014-10-16 15:58:59 +0000
Size of backup disk: Adequate
Backup size 4 TB > (Disk used 157.37 GB X 3)
Top Processes by CPU: ℹ️
52% softwareupdated
3% WindowServer
0% Finder
0% Hour Lite
0% sysmond
Top Processes by Memory: ℹ️
653 MB mds_stores
636 MB Finder
533 MB Mail
361 MB Safari
344 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
7.81 GB Free RAM
5.74 GB Active RAM
1.97 GB Inactive RAM
1.66 GB Wired RAM
1.39 GB Page-ins
0 B Page-outs
Maybe you are looking for
-
Email does not open - "COMMUNICATION ERROR. TRY AG...
I bought NOKIA x2-2 Version 11.57 just a month back. Whenever I update email service and try to open email it does not open but a message comes saying "COMMUNICATION ERROR. TRY AGAIN LATER". Please help me to solve this problem. Thanks
-
How to print a gift return label if only know the return number and order number
I have a macbook pro, it's a gift, and I want to return it. But at first time, I forgot to print the return label, now I know the order number and return number, when I click "Print return label", it appeared I need to sign in, but I don't have a app
-
Change customized reports to access archived data
Hello, I need to change few customized reports (z-reports) to make it fetch data from an archive database. This is done for SAP IS-H reports. So some of the tables for eg NBEW(movement table) will be archived and a correspoding infostructre will be c
-
Shell script stop and start SAP
Hello, Can you tell me the command to input username and password to login from shell script? I just know this - su - sidadm -c "stopsap" But this just logs in using Username - sidadm. how do modify this to add password also in command line?
-
Since upgrading to OS X Yosemite 10.10.1, I have found that the Unsharp mask and Adjust sharpness tools are not working. Sometimes at extreme settings they work, but at other times, they don't work at all. Does anyone have any advice, please?