Regarding printer issue

I install both new cartige black and color.after installation power up the printer and the ink indicator is showing one is full i.e. left side and another one is blank which is right side and the ambar color esclamation sign is blinking.If i remove any of one cartige then get print out.i replace cartige but problem remain same

Hi,
It is AIX server. How to give print from OS. Use this command:
$ lp -d <printer_name> -n<copies> <file_name>Note: 784640.1 - Any EBS Requirements For Local or Remote Printers
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=784640.1
lp Command
http://publib.boulder.ibm.com/infocenter/pseries/v5r3/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds3/lp.htm
And also how do i know it is valid printer or not.If printing from the OS works properly, check your printer setup from the application (System Administrator responsibility > Install > Printer > Register).
Regards,
Hussein

Similar Messages

Regarding printing issue..

Hi All
This is a production issue ..
I am working in Support project .In one program is executing properly , means output is displaying .when ever you want to print the o/p it does not print the HEADER details, means it does not print the selection criteria values.
In that report i have selection criteria like Porg and plant vender name like 10 field r there.
I am using one Z function module for display the output. in that FM i am using <b>RS_REFRESH_FROM_SELECTOPTIONS</b> function module.
Using this Z FM i Display the O/P properly.
The problem is when ever i give print the output the header detail are missing,The item details only printing.mean's its missing the selection criteria values.
the function module is working fine for other reports.and printing the header details also.only for this report only its not working ..i checked version management also.its also OK.
in 4.5B version report iss executing fine.when ever its ECC6 version the problem occurs means printing issue.
Regrads,
Arnald
Title was edited by:
Alvaro Tejada Galindo

Use TOP_OF_PAGE event for displaying output for selection options

Auto adjustment of page orientation causes printing issues with documents that have a page width greater than its page height.

Hi,
Since an upgrade from Word 2003 to Word 2010, we are experiencing printing issues with certain
documents that have a page width greater than its page height.
In Word 2003, it was no problem to set the page width greater than the page height while setting the page orientation to "portrait".
In Word 2010, this seems impossible: despite leaving the page orientation to "portrait", if one changes the page width/height as stated,
Word 2010 automatically adjusts the orientation to "landscape". Resetting the orientation to "portrait" will flip the page's width/heigth settings.
This behaviour causes printing problems: the page prints out 90° rotated.
I do not believe this is a printer driver issue: I tried several different printer drivers, and all give the same (bad) result. Setting the printer driver's page orientation settings (before printing) makes no difference, as
Word 2010 seems to force the page orientation settings.
Inserting the documents 90° rotated is not an option, since it causes problems with the printing margins.
This is very annoying, since we have to print official documents of a municipality (driver's licences).
Is there a workaround for this issue?
Regards,
Laurent Grandgaignage
Sysadmin Gemeentebestuur Stabroek, Belgium

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, we can follow these steps to test this issue
Step 1: Repair Office 2010
1.
Click
Start, and then click Control Panel.
2.
Click
Programs and Features.
3.
Click the
Office 2010 program that you want to repair, and then click
Change.
4.
Click
Repair, and then click Continue. You might need to restart your computer after the repair is complete.
Step 2:
Rename the global template (Normal.dotm)Follow the steps for the operating system that you are using:
Windows Vista and Windows 7
a)
Exit Word 2010
b)
Click
Start.
c)
In the
Start Search box, type the following text, and then press
ENTER:
1.
%userprofile%\appdata\roaming\microsoft\templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
Microsoft Windows XP
a)
Exit Word 2010
b)
Click
Start, and then click Run.
c)
In the
Open box, type the following text, and then press ENTER:
%userprofile%\Application Data\Microsoft\Templates
d)
Right-click
Normal.dotm, and then click Rename.
e)
Type
Oldword.old, and then press ENTER.
f)
Close Windows Explorer.
How to troubleshoot print failures in Word 2010, Word 2007, and Word 2003
http://support.microsoft.com/kb/826845
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHNPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

Remote Desktop Connection and printing issues

Hi,
I am using Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I noted there is problem with the printer issues. Sometimes, when I tried to print some documents using applications
in Windows Server with my local printer in my room connected to desktop, it won't work.
Moreover, I need to go to Windows Server, Component Service to restart printer spooler so it will work again. This is a pain.
I also noticed there is about 30 seconds wait to process any document to print.
Unlike if I print documents directly from my local desktop computer running Windows 7 and connected to local printer, it only takes seconds to print.
My desktop is connected to Windows Server 2008 via local area network. I should not expect such a significant delay in printing.
I also wonder why printer spooler needs to be restarted when printer is not working.
Can anyone advise me about this? Can Microsoft looks into this problem and release updates to fix the bug to improve the system?
Thanks
Regards,
Clement

Hi,
Please check if you turn on this settings:
You need to set this up just before you connect. The setting will be saved so that you won't need to change it the next time you connect.
1. Open Remote Desktop Connection by clicking the Start button, clicking
All Programs, clicking Accessories, and then clicking
Remote Desktop Connection.
2.Click Options, and then click the Local Resources
tab.
3.Under Local devices and resources, select the Printers check box.
4.Click Connect to start the session.
Make sure that you select your printer in the Print dialog box each time you print.
Karen Hu
TechNet Community Support

HP Printer issue after installing Mountain Lion

Hi, a few days ago I posted the following question regarding a printer issue and so far I have not been able to fix the problem. Here's the original question and I will continue the explanation after this....
Hi, I am a fairly new iMac owner and I am really happy with my apple, however I have an issue with my printer and I kind a "blame" Montain Lion for it. I have been using this HP Laserjet P2015 dn printer for a long time, initially with Windows and now with iMac. The first year approximately there was no problem at all to print and the transition from Windows to Mac with the printer had no difficulties at all. It was connected wirelessly via router. After downloading Montain Lion I notice the printer intermittently lost connectivity. The only way to print was turn off and turn on and it will print fine until the next time. Now out of the blue it's doing the same thing so frequently I can't print a complete document at all. It starts, and finish without printing the entire document or not connect at all. I have tried everything, including a static IP address for the printer, connect the printer to the computer via USB, downloading all the printer updates from HP and nothing seems to work. Just now, I did it again (for 100 times so far), delete the printer, reinstall and it's doing the same thing. It connects fine (either via IP or USB) and it last connected only for a minute or two. That's it. It's a shame, because I like the printer. The printing quality is great and to add more pain, I recently got a new ink cartridge ($100.00) capable of printing 3000 pages. It has 70% of ink still. Any computer sabby person out there has any ideas for me? Like I said, I've done everything.... inluding,
1. Remove the printer
2. Update the drivers
3. Assign a static IP address to the printer
4. Connect via USB
5. Disconnect the printer for a while and restart the whole process again
6. Did a "cold start" to the printer
I don't know what to do, and I don't want to spend more $$$$$ on a new printer. Is Montain Lion to be blame for? Please advise me.
Any help will be greatly appreciated.
At this point I do have the printer connected only via USB, prints one page (perfectly) and then goes offline. Before installing Mountain Lion I did use the printer with my Mac for almost a year with no issues at all. I even downloaded Mountain Lion again thinking of any flaws during initial installation. I've done all the updates, drivers, uninstall, re install, repair disk permission, static ip address....you name it... I've done it all and nothing seems to work. What makes no sense to me is that prints so great only one page and then is gone.... I would be happy to know the printer is dead and go get a new one but in my mind if it prints ok one page it still works. I don't want to have a new printer and find out it does the same thing. I can't keep myself away from blaming Mountain Lion. IS THERE ANY WAY TO REMOVE MOUNTAIN LION WITHOUT THE RISK OF DAMAGING THE COMPUTER???? PERHAPS GOING BACK WILL PROVE ME MOUNTAIN LION IS THE CULPRIT. Just saying... I am totally frustrated. I guess the next step is to get a baseball bat and fix the printer once and for all.
Any help will be greatly appreciated.

Any fix for this? I have the same problem after upgrade. It's off by many seconds. Thank you.

Printing issue with Electronic Signatures

In the footer of my document, i place document properties and also use the captioning feature for tables and figures. I have saved it in native 2010 format not in a compatability mode.
When I print my document (paper or PDF) these fields print properly.
After I electronically sign the document and look at the document on the screen, the fields and caption numbers (Table 1-1: Intended Audience) appear correctly. When I print to PDF or paper, the numbers disappear (Table 1-: Intended Audience) and they
also disappear from the screen.
When I close the document and reopen it, the fields are correct. It only changes after the document prints.
Using Microsoft Office Professional Plus 2010 Version 14.0.6023.1000 (32-bit).
(--merging--)
The original document was a 2007 document opened/stored in the 2010 format.
Reproduced with new 2010 document simply by creating two properties:
Template Version - Test - Value 1.0
Template Date - Date - Value 1/25/2012
And doing the following:
Using the default Normal template with calibri as the font
Added a heading level 1 to the document
Added a 2x2 table with Insert Caption including the chapter number based on heading 1 below the table
Added the template version and template date as two lines on the page
Inserted a signature line
Created a footer with the template version, page number aligned center (via tab), template date alighted right (via tab)
Printed without signing and all data was present (Table 0-1: Test)
Signed the document and printed. The following was missing:
The template date in the footer.
The table label was Table 0-: Test
The template date was present in the middle of the document

Hi,
Is this problem only affect Word program with Electronic Signatures?
Please try to test Printing with different printer drivers.
If the Word printing problem occurs only when you print documents with a certain font or a certain type of graphics image, try to print to another printer.
If no other printer is available, contact the manufacturer to find out whether there is an updated version of the driver or a different driver that works with your printer model.
You may also follow other methods in this KB article troubleshoot print issue in word:
http://support.microsoft.com/kb/826845
Best regards.
William Zhou
TechNet Community Support

Reader 10.1.3 Kyocera Print Issue

Hello,
we are experiencing an Print-Issue in one of our field offices in Austria.
After we deployed Acrobat Reader 10.1.3 (from 9.5) the employees in this Office were no longer able to print on an Kyocera FS-C5015N(via Network), when they try to print any PDF they get the following error message : "Adobe reader has encountered a problem and needs to close"
Because this Kyocera is only in this office we cannot reproduce this Issue somewhere else.
We are running Win XP Sp3
There is no other PDF Software installed
What we already tried :
- Re-Install Acrobat Reader 10.1.3
- Re-Install Printer on the PCs
- Re-Install Printerdrivers
- Re-Configure Printer Settings
- Re-Configure Printer Network Settings
- Disable "Protected Mode on Startup"
- Disable "Show PDF in Browser"
- Enable the "Print as Picture" setting
- Different PDFs,
- When we Print to another local Printer there is no Problem(but thats a small&slow one and just our Emergency Solution)
- After we Re-Installed the Printer on the PCs the first printing attempt works without Problems
- Tried to print over the Network from my office (Vienna) on this printer -> same Problems
- Also some other "tricks" the local IT-Expert tried
So my question is, if anyone is experiencing the same Issue on this Kyocera or any other or can give me any Feedback according this Problem.
Thanks !
Dominik Brinnich
AMOS AUSTRIA GMBH
Information Management
[private information removed]

This is a public forum; please do not post your email address or other private information.
Regarding your issue; it appears you have already tried everything possible - I have no other ideas what to try with 10.1.3.
The only solution for now I can see is to revert back to 9.5.1; is this a problem for you? This should be only temporarily until a new version of 10.x or 11.x becomes available.

Problem regarding printing in first and last page of a form

I need to print a some text only in the first page and last page. I have defined a window to print this text. The number of pages that will be created is decided on run time. Can some body please help regarding this issue. I have tried to use SFSY-FORMPAGES to calculate total number of pages in the begining but it does not work
Edited by: subhajit bhadra on Feb 20, 2009 7:44 AM

Hi Badhra,
You can use conditions for that window or text element.
in conditions, tick 'only befor main window' forr header
and 'ONly after main window ' for footer.
Sunil

Printing Issue - Custom Media Sizes, InDesign CC/Mac Mavericks

Hi all,
I've got a strange problem that I hope someone can provide some insight to. Perhaps this is a bug, but I'd rather ensure that there isn't something here that I haven't understood.
I have a project that I periodically modify and re-print on custom size media (3.25" x 7.36"). I've used the same Id document and workflows since, probably, Id 2 or 3, updating each time to the latest versions. The problem may be in the way Id CC interacts with the MacOS X printing system. The printer in question is a Xerox 8550.
The project is a one page table printed on this particular card stock. What's happening is that the printable area on the stock isn't being fully used - the top and bottom of the media aren't being printed - thus the top and bottom of the content is being cut off, in a way that wasn't an issue previously.
The printer control panel prompts for and accepts the media size correctly (I believe these printers have checks to ensure media fed matches the printable area; the Phaser engine doesn't like printing "off the paper").
Again, the same document has been used for many years, so I've tried the following steps to isolate and remediate the problem:
Document Setup: Custom Page Size, verify correct for media.
Print dialog: "Page Setup..." format for (custom media size defined for OS X), also verified to be correct for media.
Print dialog: "Setup", paper size Width and Height, correct; orientation correct, offset and gap 0p0, scale 100%.
Print dialog: PPD correct.
Recreated document, re-entering sizes and verifying setup. No change.
Created a test document, with same settings, and a scale extending outside of the printable area. The specs for (and my experience with) the printer are that the printable area is 5mm from the edge of the paper. The result of the test is that the content is cut off at 10-11mm from the edge instead.
Exported PDF from Id. Printed using Preview, same OS X page setup configuration. Printer prompts for correct media size. Content in test file prints as expected, to 5mm from media edge.
Printed test document from Acrobat XI, using "Actual Size", "Choose paper source by PDF page size", and "Use custom paper size when needed". Printer prompts for correct media size, content prints as expected, again, to 5mm from media edge.
So, in brief, exported PDF prints properly (and this is a workaround), but it's a pain that Id has this issue. All software involved is up to date. I haven't tried to dig into the PPD, as PostScript isn't one of my areas of strength, but I'm reasonably sure it's correct. I've also tried a similar test using Letter-size paper, and that also prints to 5mm.
I'd love to get some feedback on this. Many thanks.

For what its worth, I've been trouble shooting this issue with Adobe / Xerox / Apple for some time now. Here are my findings so far:
--------------------------------------------------Adobe's final response after a very long help ticket--------------------------------------------------------
This Email is in regards to the case related to the adobe application and Printing issue ,
As checked we were able to see that application is able to create the document with correct size , when checked within Adobe Pdf properties the size was showing as per document specification and when we tried to print the same , the document was showing the same values carried forwarder to the printer and in the preview it was showing the same specific setting of the document size in the printer previewer
It was during the printing process the same value are not being calculated correctly as per our interaction , you were able to use the same in the previous version of Mac 10.8. 5 , please check if there is any update available for the 10.9 version of mac and if it would work on the same ,we would request you to contact your printer help support for the same we are leaving the case open and would request you to call us back if there is any further issue on 800 833 66 87
Thanks and Regards
Jatinder
Adobe Technical Support
--------------------------------------------------Xerox's response, after an escalated level 2 ticket--------------------------------------------------------
Here the Decline from 3rd Level Engineering.
2nd Level Reference #: 19458297
Customer Name: VDB REAL ESTATE
Product Model: Phaser 7800
Problem Summary: Scale is incorrect when printing PDFs on custom size paper in OS X 10.9
Decline Reason: App/3rd party Issue
Note: I tested using the included process steps:
STEPS TO REPRODUCE-
I tested using a PDF that was 6" x 8.5".
In Acrobat or Adobe Reader, choose File > Print, go to Page Setup and create a custom page size of 8" x 9.5".
In the Acrobat dialog, set the size to "Actual size".
Print this to the device, note that the image is about 7" x 10".
Interestingly, in the Acrobat dialog, if "Choose paper source by PDF page size" is selected, the previewed page size is not that of the document, but instead shows 10.13" x 7.17". This size will change if different printers are selected.
Scaling is not an issue when printing to standard page sizes.
I was able to recreate the issue on a Mac running OS 10.9.1 using the Xerox 7800 print driver. I then tested on Mac OS 10.9.1 using a generic Postscript driver and also recreated the issue. This indicated that this is not a Xerox driver issue. I then tested on a Mac OS 10.8.5 using the same Xerox 7800 driver version and it worked as expected without scaling the image.
Mac OS 10.8.5 uses CUPS version 1.6.2 for printing where 10.9.1 uses CUPS version 1.7. I believe this is a CUPS issue and you will need to work with Apple to resolve it.
You may appeal this decision by replying to this email and providing appeal details.
Regards,
Faye Hanley
Technical SPAR Administrator
Technical Escalation Support Office
Xerox Corporation
400 Main Street, Suite 2040
Saint John, NB, E2K 4N5
Phone: 1-888-380-9422 Opt 4
--------------------------------------------------Apple's response, after an escalated ticket--------------------------------------------------------
While using 10.92 with Xerox Phaser 7800DN (2.94.1 PPD - Installed via Software Update), PDF at a custom page size was sent to spool folder via Preview was correctly sized, however the document produced by Adobe Reader appears to be icorrect. When using Preview the PDF printed to a custom page size at 100% scale comes out the proper size.
Carol West
Apple
P.S. If you wish to reach me regarding this case, please contact me at 1-877-388-0879 Ext. 85789
**this is a paraphase of what the engineer (Clay) sent back to Carol West who was assisting in my help ticket. She was not allowed to send me the engineer's findings in email, she was only allowed to read it to me over the phone as I typed it out.
Basically go back to Adobe and ask for help there. I guess at least the circle is closed as I am back to where I started.

Smart form printing issue with LOCL printer and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks,
Babu

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
Color: White
Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
Color: Black
Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Prabhu

Smart form printing issue with LOCL and SAP printer

Hi,
The issues are as follows:
1. the top portion of the Invoice and PO does not print when using the SAP printer (works when using LOCL)
2. the shaded areas of the Order Confirmation and Invoice are black when printing to a SAP printer (works when using LOCL)
In an attempt to correct the printing issue is was suggested that we change the SAP printer device type from HPLJ4 to POST2. This did address the problem where the shaded areas were black but then we received reports that other reports printed "garbage". Its possible that using POST2 device type causes issues when printing to HP compatible printers.
Apparently all the testing was done using the SAP printer LOCL and not the SAP printer name and SAP spool system. LOCL uses the SAP GUI and Windows system to produce the output. Our production users at the plant site and Toledo are using SAP defined printers with the device type of HPLJ4. HPLJ4 is our standard here as OC for our printer definitions and we have HP compatible printers installed in our Toledo location and all of our remote sites. We need to be able to correctly print the Invoices, Purchase Orders, Sales Order Confirmations on our SAP printers.
What can be done to the reports to allow them to print on our HPLJ4?
Thanks, Prathap

Hi Prathap,
Check the background shading of the windows of the Smartform where you get the black boxes. If it is set something like this:
   Color: White
   Saturation: 100%
this can be the problem.
I know it is strange but some black and white printers cannot handle this setting. They only know one color black so the ignore the color setting and just take the saturation 100% setting.
The reason it works with local and device type SAPWIN is that the print data is created in Windows and sent to the printer as graphic.
Please change the shading for window MAIN -> tab 'Output Options' to:
   Color: Black
   Saturation: 0%
and this should resolve the problem.
Then create a new spool and check if the problem is resolved. See SAP Note #400050.
Regards,
Aidan

Printing issue in Commercial Invoice Report for Oracle Reports Version 6i

Hello All,
I am working on modifying rdf for Commercial Invoice i.e. WSHRDINV.rdf for Oracle Apps Version 11.0.3 to display Customer Part and Customer PO as the seeded report do not print Customer Po and Customer Part in its output. I am done with the modification too but I am getting a minor issue regarding Printing the Customer Po and Customer Part. As per the requirement i need to switch the places of Customer Po and Customer Part. But when I switch its places and when only Customer PO is available against a Order Number, the Customer PO is getting printed in place of Customer Part. I tried changing its properties too. But still getting printed in place of Customer Part.
Here, Customer Part is under different group and Customer PO is under different group. And Customer Part repeating frame comes under Customer PO repeating Frame.
Can anyone please suggest why Customer PO is getting printed in place of Customer Item when only Customer PO is against a Order Number and not Customer Part.
Thank You
Regards,
Meghana

Hi Gregor
i am using the Developer 9.0.4 and i too have the same problem. i have seen your posting and made the required changes as required. but here my page sizes differs in my case
i have mainly 3 sizes
1. Width = 8" (77)
Height = 6 " (36)
2. Width = 9" (84)
Height = 8 " (48)
3. Width = 11" (90)
Height = 6 " (36)
i have used the dflt file and created the replica of those with the required sizes. i have no problem as such with the width of the print. But height of the paper size is not taken as required. its by default taking the paper size as width = 9" (80) and height = 12" (72)
Can u let me know how to get the desired output of mine.
Rgds
Bhaskar

How are printer issues solved by creating a new login ID in ts?

I have been having printing issues with one user on a terminal Server. I have been trying to figure this out for some time and decided to make a new TS login ID which fixed the issue....At lest appears to have fixed the issue....
Can anyone explain to me how a user's key can leak and cause this types of issues? Or point me to a great article to educate myself...
Thanks,
Andrew
Thanks, Andrew

Hi Andrew,
à
I have been having printing issues with one user on a terminal Server.
Would you please let me know more details of this printing issue? Did you get any error message? Please also
check Event Viewer if can find some relevant events. When this one user has this printing issue, did other users encounter the same issue?
Meanwhile, would you please let me know how deploy printer for the terminal server? Did you configure printer
redirection settings for terminal server connections via Group Policy?
à
I have been trying to figure this out for some time and decided to make a new TS login ID which fixed the issue....At lest appears to have fixed the issue....
Based on this description, this issue seems to be related to the user profile. Just my guess.
If any update, please feel free to let me know. More details (error message, events or others) may help us
to go further analyze and narrow down this issue.
Hope this helps.
Best regards,
Justin Gu

Pick list print issue?

Hello Friends,
I have a printing issue with my client,
For specific customers they ship very large kits(BOM's) and require ship labels to print for each component listed on the picklist , in addition to the regular ship label for the header material YX.
These components are item category YF (purposely omitted for delivery note).
They do not want this to print of every customer, Please advice how we can add a logic to print shipping labels for components only for specific customers.
thanks;
Mike

hi,
Currently i am working on similar object
We have developed Zprogram for the project. We are using bar code printer which is used to print the lables.
1. Developed a zprogram with selection screen child & parent material radio buttons. so whenver u click child material it will create label only for components apart from header material.
2.Program generates a text file with component details and downloads it to the Application server
3. Once the text fiole get downloaded & bar code printer is ON , it will automatically prints the labels. If the barcode printer is OFF, then u will be able to see the text files
Please find the Zprogram used, pls take help of ur ABAPER to cchnage the plants & details corresponding to ur setup
REPORT ZKITTAG message-id z_apd.
tables : mseg,
         makt,
         mkpf,
         zmmstoragebin,
         t001w,
         mast,
         stpo.
**SELECTION SCREEN
selection-screen : begin of block blk1 with frame title text-001.
parameters        : p_werks type ekpo-werks obligatory.
parameters        : s_mblnr type mseg-mblnr obligatory.
select-options   : s_matnr for mseg-matnr obligatory no intervals
no-extension.
parameters:p_child radiobutton group rad,
           p_parent radiobutton group rad.
*parameters        : no      type i.
selection-screen : end of block blk1.
data :begin of it_mseg_header occurs 0,
      MBLNR LIKE MSEG-MBLNR,
      MJAHR LIKE MSEG-MJAHR,"Kiran 28.06.2008
      EBELN LIKE MSEG-EBELN,
      MATNR LIKE MSEG-MATNR,
      MENGE like mseg-menge,
      BWTAR LIKE MSEG-BWTAR,
      meins like mseg-meins,
      MAKTX LIKE MAKT-MAKTX,
      menge1(19),
      STORAGE LIKE ZMMSTORAGEBIN-STORAGE, "Sridhar on 22082005
      WERKS LIKE MSEG-WERKS,               "Sridhar on 22082005
end of it_mseg_header.
data: menge1 like mseg-menge.
DATA : BEGIN OF IT_MSEG_CHILD OCCURS 0,
        MBLNR LIKE MSEG-MBLNR,
        MJAHR LIKE MSEG-MJAHR,
        EBELN LIKE MSEG-EBELN,
        WERKS LIKE MSEG-WERKS,
        MATNR1 LIKE MSEG-MATNR, " HEADER PARTNO
        MATNR LIKE MSEG-MATNR,
        MAKTX LIKE MAKT-MAKTX,
        BWTAR LIKE MSEG-BWTAR,
        MEINS LIKE MSEG-MEINS,
        STORAGE LIKE ZMMSTORAGEBIN-STORAGE,
        HQTY LIKE MSEG-MENGE, " HEADER QTY
        MENGE LIKE MSEG-MENGE, " CHILD QTY
        SUMQTY LIKE MSEG-MENGE, "SUM OF CHILD QTY FOR SAME PARTS
        QTPKIT LIKE MSEG-MENGE, " QTY PER KIT
        PQTY LIKE MSEG-MENGE, " PRINT QTY
        PQTY1 LIKE MSEG-MENGE, " PRINT QTY 1
        QUO TYPE I,
        REM LIKE MSEG-MENGE ,
        MENGE2(19),
        MENGE3(16),
        MENGE4(19),
        MENGE5(16),
      END OF IT_MSEG_CHILD.
DATA: TEMPQUO LIKE MSEG-MENGE,TEMPREM LIKE MSEG-MENGE,
        TEMPHQTY LIKE MSEG-MENGE,TEMPSUMQTY LIKE MSEG-MENGE,
        CMPVAL LIKE MSEG-MENGE.
data: v_bktxt type mkpf-bktxt.
data: sum like mseg-menge.
data : prod(13).
data : n1(2) type n.
data : n2(2) type n.
data : n3(2) type n.
data : n4(2) type n.
data : c1(2) type n value 1.
data : dsn(150).
data : dsn1(100).
data : number(3).
data : file(50) value 'E:\userdata\Barcode_kittags\kit00' .
Data : file1(50) value 'E:\userdata\Barcode_kittags\kit00' .
Data for server details
data : host1 like syst-host.
data : sysid like syst-sysid.
RANGES : r_werks FOR mseg-werks.
*AT SELECTION SCREEN.*
at selection-screen.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = 'WK01'.
APPEND r_werks.
r_werks-low = 'CQ01'.
APPEND r_werks.
if p_werks not in r_werks.
message 'Plant should be either plant1 or plant2' TYPE 'E'.
endif.
select single werks into t001w-werks from t001w
         where werks eq p_werks.
if sy-subrc <> 0.
    message e000(z_apd) with 'Invalid Plant...Please Check'.
endif.
select single mblnr into mseg-mblnr from mseg
         where mblnr eq s_mblnr.
if sy-subrc <> 0.
    message e000(z_apd) with 'Invalid Material Doc...Please Check'.
endif.
start-of-selection.
perform get_data.
if p_child eq 'X'.
    if it_mseg_child is initial.
   No Details Available
      message i017(z_apd) with text-002.
      exit.
    else.
      host1 = syst-host.
      sysid = syst-sysid.
      n1 = 1.
**Sorting according parent material and child parts
      sort it_mseg_child by matnr1 matnr.
loop at it_mseg_child.
      if p_werks = 'WK01'.
        concatenate file n1 '.PJ' into dsn.
      ENDIF.
      if p_werks = 'CQ01'.
        concatenate file1 n1 '.PJ' into dsn.
      ENDIF.
      perform write_data.
      clear dsn.
      n1 = n1 + 1.
endloop.
      message i017(z_apd) with TExt-003."'File Has Been Created'.
      clear: it_mseg_child, it_mseg_child.
      refresh : it_mseg_child, it_mseg_child.
    endif.
else.
    if it_mseg_header is initial.
   No Details Available
      message i017(z_apd) with text-002.
      exit.
    else.
      host1 = syst-host.
      sysid = syst-sysid.
      n1 = 1.
**Sorting according parent material and child parts
      sort it_mseg_header by matnr.
loop at it_mseg_header .
      if p_werks = 'WK01'.
        concatenate file n1 '.PJ' into dsn.
      ENDIF.
      if p_werks = 'CQ01'.
        concatenate file1 n1 '.PJ' into dsn.
      ENDIF.
      n2 = it_mseg_header-menge.
      perform write_data1.
      clear dsn.
      n1 = n1 + 1.
endloop.
      message i017(z_apd) with TExt-003."'File Has Been Created'.
      clear: it_mseg_header, it_mseg_header.
      refresh : it_mseg_header, it_mseg_header.
    endif.
endif.
end-of-selection.
*&      Form get_data
      text
FORM get_data .
AUTHORITY-CHECK OBJECT 'ZPLANT'
ID 'WERKS' FIELD P_WERKS.
IF SY-SUBRC NE 0.
    message E006(zmess) with text-009 p_werks.
endif.
select a~mblnr
         a~mjahr
         a~ebeln
         a~matnr
         a~menge
         a~bwtar
         a~meins
         a~werks
   from mseg as a
   inner join mkpf as b
   on amblnr = bmblnr and
       amjahr = bmjahr
into corresponding fields of table it_mseg_header
where
a~WERKS = p_werks
and b~mblnr = s_mblnr
and a~matnr in s_matnr
and a~BWART = '101'.
loop at it_mseg_header.
    select single maktx from makt into
           (it_mseg_header-maktx)
           where matnr = it_mseg_header-matnr.
    select single storage into (it_mseg_header-storage)
    from ZMMSTORAGEBIN
    where WERKS = it_mseg_header-WERKS
    and MATNR = it_mseg_header-MATNR and
    BWTAR = it_mseg_header-BWTAR.
    move '1.000' to it_mseg_header-menge1.
    CONCATENATE it_mseg_header-MENGE1 it_mseg_header-meins INTO
    it_mseg_header-menge1 .
    modify it_mseg_header transporting maktx menge1.
SELECT DISTINCT AMBLNR aMJAHR aWERKS aMEINS aEBELN aMATNR a~BWTAR
a~MENGE
INTO CORRESPONDING FIELDS OF TABLE IT_MSEG_CHILD
FROM MSEG AS A INNER JOIN MKPF AS B
ON AMBLNR = BMBLNR AND
   AMJAHR = BMJAHR
WHERE A~MBLNR = IT_MSEG_HEADER-MBLNR
AND A~MJAHR = IT_MSEG_HEADER-MJAHR
AND A~BWART = '543'
AND A~WERKS = IT_MSEG_HEADER-WERKS
AND A~EBELN = IT_MSEG_HEADER-EBELN.
*AND A~BWART = '541'.
endloop.
loop at it_mseg_child.
    SELECT SINGLE SUM( MENGE )
    INTO (TEMPSUMQTY)
    FROM MSEG
    WHERE MBLNR = IT_MSEG_CHILD-MBLNR
    AND MJAHR = IT_MSEG_CHILD-MJAHR
    AND WERKS = IT_MSEG_CHILD-WERKS
    AND EBELN = IT_MSEG_CHILD-EBELN
    AND MATNR = IT_MSEG_CHILD-MATNR
    AND BWART = '543'.
    select single maktx
    into it_mseg_child-maktx
    from makt
    where matnr = it_mseg_child-matnr.
    select single matnr MENGE
    into (it_mseg_child-matnr1,TEMPHQTY)
    from mseg
    where mblnr = it_mseg_child-mblnr
    and mjahr   = it_mseg_child-mjahr
    and werks   = it_mseg_child-werks
    and ebeln   = it_mseg_child-ebeln
    and bwart = '101'.
    select single storage
    into (it_mseg_child-storage)
    from ZMMSTORAGEBIN
    where WERKS = it_mseg_child-WERKS
    and MATNR = it_mseg_child-MATNR and
    BWTAR = it_mseg_child-BWTAR.
    IT_MSEG_CHILD-QTPKIT = TEMPSUMQTY / TEMPHQTY.
    IT_MSEG_CHILD-SUMQTY = TEMPSUMQTY.
    IT_MSEG_CHILD-HQTY = TEMPHQTY.
    modify it_mseg_child.
endloop.
DELETE ADJACENT DUPLICATES FROM it_mseg_child.
LOOP AT IT_MSEG_CHILD.
    IT_MSEG_CHILD-QUO = IT_MSEG_CHILD-MENGE DIV IT_MSEG_CHILD-QTPKIT.
    IT_MSEG_CHILD-REM = IT_MSEG_CHILD-MENGE MOD IT_MSEG_CHILD-QTPKIT.
    it_mseg_child-MENGE3 = it_mseg_child-QTPKIT.
    condense it_mseg_child-MENGE3.
    CONCATENATE it_mseg_child-MENGE3 it_mseg_child-MEins INTO
    it_mseg_child-MENGE2 .
    condense it_mseg_child-MENGE2 .
    it_mseg_child-MENGE4 = IT_MSEG_CHILD-REM.
    condense it_mseg_child-MENGE4.
    CONCATENATE it_mseg_child-MENGE4 it_mseg_child-MEins INTO
    it_mseg_child-MENGE5 .
    condense it_mseg_child-MENGE5 .
    MODIFY IT_MSEG_CHILD.
ENDLOOP.
ENDFORM.                    " get_data
*&      Form write_data
      text
FORM write_data .
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
    exit.
endif.
transfer 'KTN.LBL' to dsn.
SORT IT_MSEG_CHILD BY EBELN STORAGE.
LOOP AT IT_MSEG_CHILD.
   IF IT_MSEG_CHILD-QUO > 0."uncommented
IF IT_MSEG_CHILD-REM = 0."commented
n3 = IT_MSEG_CHILD-QUO.
do n3 times.
transfer 'KTN.LBL' to dsn.
   MOVE 1 TO NUMBER.
MOVE IT_MSEG_CHILD-QUO TO NUMBER."commented
MOVE IT_MSEG_CHILD-QTPKIT TO NUMBER."commented
        condense number.
        transfer number to dsn.
        transfer : it_mseg_child-EBELN to dsn,
                   it_mseg_child-matnr1 to dsn,
                   it_mseg_child-matnr to dsn,
                   it_mseg_child-maktx to dsn,
                   it_mseg_child-MENGE2 to dsn,
                   it_mseg_child-bwtar to dsn.
        transfer it_mseg_child-storage to dsn.
        transfer space to dsn.
        c1 = c1 + 1.
        if c1 = 8.
          clear c1.
          close dataset dsn.
          clear dsn.
          n1 = n1 + 1.
          if p_werks = 'WK01'.
            concatenate file n1 '.PJ' into dsn.
          ENDIF.
          if p_werks = 'CQ01'.
            concatenate file1 n1 '.PJ' into dsn.
          ENDIF.
          open dataset dsn for output in text mode encoding default.
          if sy-subrc <> 0.
            exit.
          endif.
        endif.
      enddo.
    ENDIF.
    IF IT_MSEG_CHILD-REM > 0.
n4 = IT_MSEG_CHILD-REM.
     do 1 times.
      transfer 'KTN.LBL' to dsn.
      MOVE 1 TO NUMBER."uncommented
MOVE IT_MSEG_CHILD-REM TO NUMBER."commented
        condense number.
        transfer number to dsn.
        transfer : it_mseg_child-EBELN to dsn,
                   it_mseg_child-matnr1 to dsn,
                   it_mseg_child-matnr to dsn,
                   it_mseg_child-maktx to dsn,
                   it_mseg_child-MENGE5 to dsn,
                   it_mseg_child-bwtar to dsn.
        transfer it_mseg_child-storage to dsn.
        transfer space to dsn.
        c1 = c1 + 1.
        if c1 = 8.
          clear c1.
          close dataset dsn.
          clear dsn.
          n1 = n1 + 1.
          if p_werks = 'WK01'.
            concatenate file n1 '.PJ' into dsn.
          ENDIF.
          if p_werks = 'CQ01'.
            concatenate file1 n1 '.PJ' into dsn.
          ENDIF.
          open dataset dsn for output in text mode encoding default.
          if sy-subrc <> 0.
            exit.
          endif.
        endif.
      enddo.
    ENDIF.
ENDLOOP.
close dataset dsn.
ENDFORM.                    " write_data
*&      Form write_data1
      text
FORM write_data1 .
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
    exit.
endif.
SORT IT_MSEG_HEADER BY EBELN .
LOOP AT IT_MSEG_HEADER.
do n2 times.
    transfer 'KTN.LBL' to dsn.
    MOVE 1 TO NUMBER.
    condense number.
    transfer number to dsn.
    transfer : it_mseg_header-EBELN to dsn,
               it_mseg_header-matnr to dsn,
               it_mseg_header-matnr to dsn,
               it_mseg_header-maktx to dsn,
               it_mseg_header-MENGE1 to dsn,
               it_mseg_header-bwtar to dsn,
               it_mseg_header-storage to dsn.
    transfer space to dsn.
    c1 = c1 + 1.
    if c1 = 8.
      clear c1.
      close dataset dsn.
      clear dsn.
      n1 = n1 + 1.
      if p_werks = 'WK01'.
        concatenate file n1 '.PJ' into dsn.
      ENDIF.
      if p_werks = 'CQ01'.
        concatenate file1 n1 '.PJ' into dsn.
      ENDIF.
      open dataset dsn for output in text mode encoding default.
      if sy-subrc <> 0.
        exit.
      endif.
    endif.
*ENDLOOP.
enddo.
close dataset dsn.
ENDFORM.                    " write_data1
hope this shelps u
regards,
Arun prasad

Weird printing issue between reader 7 and 9

Hi, I just was made aware of an issue by one of my users, regarding printing a PDF file. I recently replaced his computer, both the old one and the new one are XP Pro SP3, the old one has reader 7, the new one has 9. The file in question is laid out legal (8.5x14) landscape and I believe it was created in Acrobat 4.x. It's a production schedule, roughly 10 pages. The left half side of each page has a list of items, and the right half has checkboxes for our manufacturing process. The guy printing the file is in shipping, and he just needs the left half of the page and is trying to print it as letter portrait. Under reader 7, we are clicking File, Print, set it to No scaling, uncheck Auto-Rotate and Center. If you look in the preview window, you see the legal/landscape page, but there is a white letter/portrait box over the left side of the page, and the right side is grayed out. Click OK, and that's what it prints. This is good.
Now, in reader 9, if we do all the same things and print the file, what prints is the right half of the page, which is grayed out in the preview. This is happening on his new computer (xp pro sp3, reader 9) as well as on my box (win7 ult, reader 9) and happens on multiple printers. Only thing I see different is the reader version. Has anyone else ran into this?
Thanks in advance,
Duane Pittman

Hi,
Could you please send the test document to shilpi at adobe dot com for us to investigate the issue at our end?
Thanks,
-Shilpi

Regarding printer issue

Similar Messages

Maybe you are looking for